Managing the TP link router. Go to the router settings via WI-FI. We connect to TP-LINK via a wireless network with or without a password. Resetting the router settings

When changing your password, if you need to log in to a wireless, Wi-Fi, network, or in order to see it, you will need the router settings. In this article we will tell you how to enter the configuration settings using the examples of several of the most famous routers.
Also, using the router control panel, you can make a number of settings: from renaming the access point to parameters and status wireless internet connection.

Routers TP-Link

Routers Chinese company TP-Link have similar settings, so the guide you will see below is universal. If you have one of these router models, go to the settings by performing five steps in sequence:

D-Link routers

Routers from a global manufacturer network equipment, the Chinese company D-Link, are easy to set up. That is why these routers are so popular and in demand for home use. Also, devices of this brand are produced with support for several communication methods. So, to set up a D-Link router, use one of two methods:

Method 1 Find the disk in the box with the router and follow the instructions.

Method 2Use the router settings panel.

To launch the settings panel D-Link router You will need a working browser. Open it and follow four steps in sequence:

Asus routers

Network equipment from Asus is popular, and for wireless routers characteristic high performance And optimal prices. Routers developed by this Chinese manufacturer, it is recommended to connect directly to the computer, unlike others that connect via a wireless, Wi-Fi, connection.

How to connect Asus router directly to the computer, shown in the diagram:

WAN- network cable provider, it is designated yellow. The router is connected to personal computer using the LAN port.

After connection Asus router with a computer, you need to configure the network so that it receives an IP address automatically. All settings are made in the network control center. Go into it and click on the network that belongs to the router. You will see the TCP/IP protocol properties settings window.

In this window, you need to check the corresponding box, which makes it possible to receive an address automatically when connecting.

Launch your browser, the one you use for surfing, and search bar write local address. A window will open where you need to specify your login and password for authorization. For routers from Asus, the login and password are admin.

Do not launch the router settings panel until you have connected the router to your computer. If the two devices are not connected, you will not be allowed to log into the control panel. You will see a browser notification that it is impossible to connect to the remote server.

Zyxel Keenetic routers

Taiwanese ZyXEL company is the world's leading manufacturer of network equipment. By technical parameters Zyxel routers Keenetic has no equal, but the price of these devices matches. For the router to work as it should, it must be configured correctly. And all settings are made in the device control panel.

Follow the three steps below in sequence:

Routers Rostelecom

Routers are produced under the Rostelecom brand, a domestic telecommunications company. They produce them well-known companies, for example, one of them is Sagemcom. This company produces for domestic market the majority (almost 82%) of routers are under the Rostelecom brand. If you have such a device, you can enter its settings by following three steps in succession:

If you can't connect to the router's web address

If you entered the local address of the router, for example, 192.168.1.1, but the control panel did not open, and the browser displayed a warning that the server was unavailable, the device needs additional configuration.

You were unable to connect for two reasons:

Connect two devices - a computer and a router - correctly, go to the PC taskbar and select the active connections window:

The PC and router must be connected to each other. If you see the status “No Internet connection”, you need correct settings. Follow these six steps:

Determining the router's IP address

In most cases, the router settings panel is available at two addresses: 192.168.0.1 or 192.168.1.1. The router and computer are connected correctly, the Internet is available, but the router settings panel does not appear. The reason may be that the device has a different web address. Go to connection settings to see it.

To do this, open Network Sharing Center and shared access. Find the local network connection icon. View her “State” by clicking the mouse.

A window with “Information” will open. It contains network connection information. You need the “Default Gateway IP” item. Copy the numbers and enter them into the address bar, then press Enter.

Setting up a connection address manually

Your network may not be able to obtain the address automatically. Receiving IP can be configured in manual mode. Go to Internet Protocol 4 (TCP/IPv4) properties.

Uncheck the box to automatically obtain an IP address and DNS server and configure it manually by checking two boxes: “Use IP address”, “Use DNS server”

If you have a router from TP-Link, enter the following information:

If you have a router from Asus or Rostelecom, provide this information:

Resetting the router settings

You can't log in to your browser because you don't remember the password for your router settings panel? The only way out of the situation is to return the device to its previous factory settings.

When you reset the settings, all parameters will be default, which means you can use standard password for authorization. This password is located on the router itself or in the manual.

There is nothing complicated about resetting the settings. On the back of the router there is special button. Use a suitable object to click on it. The duration of the clamping is about 9-14 seconds.

Immediately after you release the button, everything custom settings will be deleted. Now open your browser, enter the router address and log in with standard data. We've shown you all the ways you can open your router's settings panel and change its settings as needed.

LDS.ua Network User's Guide

Setting up TP-link - Option 2

1. Preliminary data.

Before directly connecting and setting up the router, you must go to your Personal Account and write down your current "MAC address".

Please note that the MAC address can only contain the numbers 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 and the letters of the Latin alphabet a, b, c, d, e, f

2. Correct connection.

On back side The router has five connectors. Four of them are signed LAN, one is WAN (Internet). For proper operation device, you need to connect the Internet cable to WAN port, and use another wire to connect one of the LAN ports to the connector network card Your computer from which subsequent configuration will be carried out.

3. Enter the router settings.

We launch any browser, where we enter http://192.168.1.1 in the address bar (the option http://192.168.0.1 is possible) and press the key "Enter". In the window that appears, in the fields "User Name" And "Password" enter admin and press the key "OK"

4. Connection setup.

You must select a section "Network", Further "WAN".

In the window that opens, fill in the fields:

WAN Connection Type: PPPoE/Russia PPPoE;

User Name: Your LDS user login;

Password: Your password;

WAN Connection mode: Check the Connect Automatically checkbox.

And finally, save the settings "Save".

After that we go to "MAS Clone" and press the button "Clone MAC Address» .

If an address appears in the MAC Address field that does not match what you wrote down from your statistics, correct it manually.

We complete the setup with the button "Save".

5. Configuring Wi-Fi connection parameters.

Now let's set up a WiFi connection. Select the “Wireless” item, and then click the “Wireless Settings” button.

Fill in the fields:

Wireless Network Name: Let's come up with a name for the WiFi network;

Region: Ukraine;

Channel: Auto;

And press the button "Save". Then we move on to "Wireless Security"

Fill in the fields:

Checkbox WPA/WPA2 - Personal

Version: Automatic

Encryption: AES

PSK Password: Wi-Fi network password

And to complete the settings, press the button "Save".

6.Software download.

Update software router is not a mandatory procedure for setting it up, but it is advisable to perform this procedure, because otherwise, correct operation is not guaranteed. Updating the software can solve the problems of previous software versions and improve the current performance of the device.

Before you start updating, you need to determine the hardware version (revision) of the router and download the software from the manufacturer’s website. To do this, look at the bottom of the router case, where we look for the line H/W Ver.:

Go to https://www.tp-link.com/ru/download-center.html. and select the model of your router. In the page that opens, select the hardware version of the router (Ver.) in accordance with the revision of your router.

If for this model there is current version software, the item will appear "Firmware", in the section of which you can download the archive we are interested in.

IN in this example the software file will be archived (zip). After extracting from the archive, we get a file with the extension bin.

7.Software update.

We log in to managing the router, in the window that opens, go to the section "System Tools", then click "Firmware Upgrade". In a new window using the button "review" find the file with the software that you previously downloaded, then click "Upgrade". After updating the software, the router will automatically reboot.

Do not unplug the power cord during the update.

TPLINKLOGIN.NET- This standard address, where the entrance to the TP-LINK router is located. To enter the control panel settings, use the login and password “admin-admin”. Go to Personal Area TP-Link router You can also use its IP - 192.168.0.1 or in some models 192.168.1.1. But what if you open http://tplinklogin.net, an error occurs - how to solve it? Let's figure out together how to log into the TP-LINK router.

tplinklogin.net - login to the personal account of the TP-Link router at 192.168.0.1

This instruction connection is universal and suitable for setting up any TP-Link routers - TL-WR740N, TL-WR840N, TL-WR841N, etc.

Friends!
Read this important information— today login to your personal account TP-Link router by the address " tplinklogin.net» is no longer available due to simple carelessness - the company forgot to pay for the domain, and it went into other hands. The router's web interface is now located either at the address " " or at the IP "192.168.0.1". Login and password for connection remain the same - admin-admin

Let's start, as they say, “from the stove,” and one of the most affordable routers TP-LINK TL-WR741N will help us with this today.

After this, most users open a browser and enter the address http://tplinklogin.net and in 50% of cases they receive an error that it is impossible to log in.

How to configure a computer to log into the TP-Link router using the TPLINKLOGIN.NET administrator address?

The whole point is in incorrectly set Windows settings connecting the PC's network card to the router. Therefore, we go to the computer’s network connection settings by next chain: Start - Control Panel - Network and Internet - Network and Sharing Center - Change adapter settings.

Click right click mouse on "Connect via local network" and open the section "Properties - Internet Protocol Version 4"

Here you need to set the checkboxes on the IP address to “Automatically receive” and DNS servers— the router will give them to us automatically. Pay attention to the last point - if certain public servers, for example, or 4.4.4.4, then you will not be able to access the address “tplinklogin.net” or “tplinkmodem.net”. Another possible variant— write here, by default it looks like “192.168.0.1”

If you need, then the way to choose network adapter a little different - you need to right-click on “Start”, select “ Network connections" and then open the "Adapter settings settings" section.

Save the parameters with the “OK” button.

TP-Link login error - 192.168.o.1/192.168.0.l/192.168.1.1

• Another very popular error lies in the user’s carelessness, when instead of a purely digital value “192.168.O.1” in address bar Instead of "zero" the letter "o" is entered. Of course, go to the control panel by incorrect address will not work.
• The same applies when the letter “L” is written at the end instead of the number “1”
• Finally, it is possible that the IP was simply chosen incorrectly - instead of 192.168.0.1 they indicate 192.168.1.1 and vice versa

How to log into the personal account of a TP-Link TPLINKLOGIN.NET router via admin-admin?

We get to the admin panel - there are many menu items for configuring the TP-LINK router, but the easiest way to start is with “Quick setup”.

First you need to select the type of your Internet connection. Rely on auto mode It’s not worth it - it’s better to find a paper contract for the provision of Internet access services and see there all the data necessary for connection. My Internet works in PPPoE mode - that’s what I’ll choose.

Next we set TP-Link settings For wireless connections. At the initial stage, it is enough to come up with a name for your WiFi networks(SSID) and 8 character password. Select “WPA2-Personal” as the encryption type. The rest can be left as default.

On last step reboot the router.

These steps are enough to log into your TP-Link router’s personal account via the web interface at tplinklogin.net or 192.168.0.1 and configure it to work with the Internet. By the way, you can also use mobile app- a separate article is devoted to this. Start using it, and you can master the rest of the settings by reading other articles on our blog.
Good luck!

There are two ways to configure a TP-Link router. The first one is suitable for beginners and inexperienced users if you need basic device configuration to connect to your Internet service provider home network WiFi. The second is for advanced users with the ability fine tuning router and its wireless network, connections digital television and SIP phone.

Whatever option you choose, in any case, to access the web interface of the TP-Link device, you need to open a web browser and enter its IP address in the address bar - 192.168.0.1 or 192.168.1.1. If you have any difficulty - which one is used on your router, then try logging in using the hostname: tplinklogin.net. Or, alternatively, look at what IP is indicated on the sticker.

1. TP-Link Quick Setup Wizard

If you went into the router settings for the first time, then by default it should start Quick setup. If necessary, the wizard can be called from the main menu by clicking on the appropriate link.

The most commonly used are the following:

Dynamic IP
- PPPoE
- L2TP

In the first case, there is no need to specify anything additional.
If your provider uses the PPPoE protocol (Dom.ru, Rostelecom, TTK), then at the next stage you need to enter your login and password to connect to the Internet.

And in the case of L2TP, like Beeline, you will also need to enter the VPN server address:

tp.internet.beeline.ru

Next step - WiFi setup on a TP-Link router:

In the "Wireless network name" field enter the name the network being created. For example - "my-home-wifi", Make sure that the "Region" field is set to "Russia", mixed mode is used and the channel and channel width are automatically selected. In the "Wireless Security" section, check the box for "WPA-PSK/WPA2-PSK". In field " PSK Password"You need to enter a Wi-Fi password, which the router will ask clients to connect to. Click on the "Next" button.

Quick setup of the TP-Link Wi-Fi router is completed. You can connect the provider's cable and use it.

2. Configuring a TP-Link router via a regular web interface

The first page that you will see when you enter the web interface is “Status,” which displays status data from the current state of the device - connection to the Internet, local and wireless networks.

In order to set up an Internet connection on TP-Link routers, you need to select the menu section Net> WAN.

Dynamic IP address (DHCP)

This is the simplest option, which is used in some branches of Rostelecom and a number of smaller providers. For Dynamic settings IP, you must select the appropriate option in the "Type" list WAN connections":

For some operators you also need to change the values MTU size, but this is rare. However, if problems arise, please check with technical support. Click the "Save" button and check your Internet access.

PPPoE (Rostelecom, TTK)

The PPPoE protocol is most often found in Russian, Ukrainian and Belarusian operators communications. For example, Rostelecom, Dom.ru, Ukrtelecom and ByFly.

In the "Connection type" list, select the "PPPoE/Russia PPPoE" option. Below you need to enter your username and password for the connection. They are usually indicated in the contract for the provision of services or are given separately on a piece of paper with connection details. Below, make sure that in the “WAN Connection Mode” section there is a “Connect automatically” checkbox. Click the "Save" button.

VPN via L2TP protocol (Beeline)

In Russia, this option is used only by the Beeline provider (formerly Corbina-Telecom). To configure it on a TP-Link router, you need to select the WAN connection type - "L2TP/Russia L2TP":

Then enter your username (in Beeline this is usually the number personal account) and password for connection. In the "IP address/Server name" field you need to enter this address:

tp.internet.beeline.ru

Set the connection mode to “Connect automatically”. Click on the "Save" button.

3. How to set up Wi-Fi on TP-Link (TL-WR740N, TL-WR841N, TL-WR941ND, etc.)

In order to set up Wi-Fi on a TP-Link router, you need to select the section " Wireless mode" (Wireless). The main parameters are located in the "Wireless Settings" subsection:

The "Network Name" line is the so-called SSID. Here you need to enter the name of your home WiFi. For example, this is “home-wifi”.
It is best to set the region to "Russia" or "Europe". We leave the remaining parameters at their default values. As a rule, they fit without problems in most cases.

Go to the “Wireless connection protection” subsection:

Here we check the box for WPA-PSK/WPA2-PSK (Recommended).
In the "Version" field, select the value "WPA2-PSK" with AES encryption.
In the "PSK Password" field, you must enter a set of numbers and letters that will be used as a password for Wi-Fi. It is advisable to make it no shorter than 8 characters and as complex as possible - your safety depends on it.
Click the "Save" button.

WiFi 5 GHz

On dual-band routers TP-Link TL-WDR3500, WDR4300, as well as Archer C2 and C7, you can also configure Wi-Fi in the 5 GHz band. To do this, go to the 5 GHz Wireless mode section.
First, open the general settings:

Here we also write down the network name and region - Russia.
Without touching anything else, click on the “Save” button.
Let's move on to the security settings:

We set the standard "WPA2-PSK" with "AES" encryption.
Let's save.
The setup of the TP-Link router (Internet + WiFi) is completed.

This instruction is relevant for following models: TL-WR740N, TL-WR741ND, TL-WR743ND, TL-WR840N, TL-WR841ND, TL-WR842ND(RU), TL-WR843ND, TL-WR940N (450M), TL-WR941ND (450M), TL-WR1043ND, Archer C2 and C7.

Routers allow people to send and receive wifi signal. They are truly popular, and manufacturers could not ignore this. More and more router models are being released every day. The problem is that not every user can configure this device themselves. In this article we will talk about how to go into the tp link router settings.

If your Wi-Fi router is connected to a computer, then let's talk about how to enter its settings:

• Turn on your computer. Open the browser available on it.
• We take the router in our hands and turn it over to the reverse side. We are looking for the item that indicates the device id. 192.168.1.1 is the standard id for the tp link transmitter.
• We enter the combination that we learned in the previous paragraph into the address bar of the browser.
• A small window appears. It contains two items - “Username” and “Password”. If no action has been taken on your device, the standard data shown on the back is used. Most likely it is admin/admin.

Username

• If everything is done correctly, the tp link router configuration is enabled.

There are times when a Wi-Fi router, despite following all the instructions, does not enter the web interface. If you cannot enter the router settings, then read the next part of the article.

Checking the connection to the computer

Before setting up the router, you need to check its connection. To him in included white network cable. Using it, the router connects to the computer. If you did it correctly, but the problem does not go away, then reboot the devices. It also doesn’t hurt to check all the cables again; they may not be plugged into the ports enough. This completes the installation of the device.

If the Wi-Fi transmitter is connected to the PC correctly, then the LAN lights on it are lit.

We are looking for a problem in IP and DNS

This is one of the most popular reasons why you cannot access the web interface on TP link routers. Need to check if this is happening automatic receipt IP and DNS. This is especially true for those who have previously used connections with static addresses.

Step-by-step instruction:

• Right-click on the Wi-Fi and connections icon located in the lower right corner of the screen. We select the item that will take us to network management.

Network management icon

• We open the window. Execute the following actions indicated in the screenshots.

Item: change adapter parameters

• Now you need to open the properties of protocol version 4. Be sure to set the settings exactly like this.

Properties of TCP/IPv4

After these steps the problem should go away. As you can see, setting up the transmitter is not difficult.

Incorrect username or password

If you provide standard login information, but it gives you an error, then most likely you have already used the router. Or the settings are simply lost. This means that you do not know the new account to log in to. Fortunately, the problem can be solved by the following in a simple way. Instructions on how to reset your tp link router:

• We find a needle or other thin device.
• We are looking for a small black hole on the router. There should be an inscription “reset” next to it.
• Carefully insert the needle into the hole. We wait more than 10 seconds.

After this, the Wi-Fi router returns to factory settings. All the information on the back side works for him.

Now you know what to do if your router settings are lost.

Specifying the router address

If somehow you cannot find out the link to the settings, then this can be done without the help of a Wi-Fi transmitter. For this:

• Turn on the interpreter command line. Enter the key combination “win” + “r”. A small window appears, enter “cmd” into it.
• Have you come in? Great. Enter "ipcongif".
• The command line produced a lot of text. We are looking for what is indicated on the screenshot.

• The address used by your device may vary.

If you enter the numbers specified in CMD into the address bar of the browser, you will be taken to settings wifi transmitter. This is how you enter the tp link router settings.

Summarize

Setting up a tp link wifi router is easy. Just go to the web interface; instructions for this are listed above. If any problems arise, try rebooting the router or resetting it to factory settings.