Player for playing DVD discs. Paid and free programs for watching DVDs
The DVD disc format is very common. And probably almost everyone on earth has a DVD player or DVD drive in their computer or laptop. And this is not surprising. There's so much you can put on this disc. From the film to good quality and ending with personal photographs.
And the history of this format began in 1996, that’s when they went on sale, first in Japan, and then in other countries. Back then, a DVD burner cost about $17,000, and a rewritable disc cost about $50. Impressive amounts. Now the drive costs about $50, and the rewritable disk is less than a dollar.
Initially, only films in good quality were recorded on DVD, which was several times higher than the quality of VHS (video cassettes). The situation is approximately the same now with the new promising standard of Bly-Ray disks. But then, little by little, DVD drives began to become cheaper, and discs followed suit. And now they can record anything they want. DVD has truly become the home disc standard. I myself have forgotten when I ever recorded anything on CD.
There are two main formats for DVD movies: DVD-9 and DVD-5. The difference is that the first one can hold one film, and the second one can hold up to 4, and also the quality of the first type is many times better than that of the second. Another advantage of films recorded in these formats is that you can embed digital audio 2.1, 5.1 and 7.1. Simply put, when watching a film, you will not only see the special effects, but also hear them as they should, almost in a movie theater. Provided that you have a sound system with a sanitary buffer.
You can watch any DVD movie in two ways:
- Using a DVD-Player connected to the TV. Perhaps the most convenient option. If you also have a flat-screen TV and a “Home Cinema” sound system connected. Then you don’t need to go to any cinemas at all. Or you can simply insert the disc into the player and enjoy watching.
- What if there is no such player, or the TV is constantly busy. Then all you have to do is watch it on your computer or laptop. But here you will need special programs to watch DVDs.
And as you understand from the title of this article, now you need to analyze the paid and free software to watch DVD video.
At first glance, the difference between them is not significant, but there are differences:
- Paid software is constantly updated and improved. This includes software such as WinDVD, PowerDVD and DVD X Player Pro.
- Free DVD viewing programs do not support 3D video. And most likely they will never be able to do this. Because they were made a long time ago and their developers are no longer working on them.
- Free ones are most often inferior in quality of digital audio playback. These are programs such as AVS DVD Player, BlazeDVD and MpcStar.
- With free ones most often more problems than with paid ones. And in paid ones they will most likely be eliminated in new versions.
- U paid programs Most often the picture is clearer and more pleasant.
Accordingly, first test the free software, and if its functionality and level of quality do not suit you, then switch to paid software.
DVD viewing programs (just click on its name to go to the analysis and then download it): She is appreciated for good sound and a picture via HDMI; for excellent multi-channel support sound systems; behind excellent quality pictures and smoothing functions. It is valued for its excellent support for 64-bit OS; for trouble-free work.
|
In basic Windows build 10 has its own DVD player, but it doesn't suit everyone. Although, Microsoft is constantly improving and updating it, perhaps latest version you will be completely satisfied. You can download DVD player for Windows 10, it is distributed free of charge and works on absolutely all devices, from computers to tablets.
Features of the program
DVD player for Windows 10 is free and extremely the desired program. It allows you to start playing various films and videos. Today, almost all players are omnivorous, so you don’t have to worry about supported formats. dvd player What we offer you to download supports all major file types. The player will help you in the following cases:- Watching films;
- Viewing presentations;
- Creating your own music library;
Another question is whether your device has DVD drive? In fact, this is not so important for using the player. The program may be useful for you to launch videos from a flash drive or even from hard drive your computer. So it’s worth downloading a DVD player for Windows 10 not only for a computer or laptop with a drive, but also for a tablet. Choose the correct x32 or x64 bit version, they all work in Russian.
Modern home relaxation means the ability to regularly watch movies and listen to music. One of the devices used for organizing inexpensively home theater, is a stationary DVD player. The ability to play DVDs is now also available in Blu-ray players, and some users generally refuse to watch videos on discs, using multimedia players that play avi or mkv encoded and collected in containers.
But stationary DVD players also remain in demand as a home theater component among those who have already assembled large collection discs of this format or simply does not see the need to switch to another type of player. Moreover, manufacturers of stationary players implement in them not only DVD support, but also playback of files from storage media connected via USB.
What to look for when choosing a stationary DVD player
When choosing a DVD player, you should look at the following main characteristics:
- supported video and audio decoding formats;
- number of audio channels;
- types of audio/video outputs;
- availability of USB ports;
- additional functions (karaoke, image scaling).
Playable formats
The first thing you need to look at is how “omnivorous” the DVD player you like is. The more file formats it supports, the better buy– you can use the player to play videos not only from discs, but also from other media, as well as view photos and listen to music. This is important because DVD video resolution is not enough for big screen modern TV. Therefore, it’s good if the player can be used not only to play discs from your collection, but also to watch new films in HD and Full HD resolution.
A stationary DVD player is capable of not only playing a disc on which films are recorded in DVD format, but also playing information from CDs with audio files and pictures and, if available, USB port, read other storage media (flash drives or portable hard disks) with multimedia files recorded on them, encoded using Xvid, DivX, MPEG4, etc. codecs, collected in MKV containers,avi. Players can usually read MP3, WMA, WAV formats from audio files.
You should buy a player that reads all types of discs: both industrially produced and home-recorded - DVD, DVD-R, DVD+R, DVD-RW, DVD+RW, CD-R, Video CD and other rare formats eg DVD Audio.
Number of audio channels and audio decoding
Once you've figured out what types of files your DVD player can play, pay attention to the number of audio channels. Most players support 5.1 audio – five channels and a subwoofer. Only the cheapest devices provide two-channel stereo sound.
In order for the player to reproduce multi-channel audio, decoding support is needed sound formats: DolbyDigital, DTS, LPCM, PCM. The selected player must support these formats, otherwise the correct sound picture will not be formed.
Connector types
A stationary DVD player connects to a TV, as well as audio speakers or a soundbar, if we're talking about about a full-fledged home cinema. Just check that the player has ports with which you can connect it to your TV and speakers. But manufacturers take into account different requirements, so there are many connectors.
To transmit audio, depending on the cost of the player, set:
- 6 RCA connectors (“tulips”) for connecting speakers and transmitting decoded sound to 5.1 speakers. Now, due to almost universal use, HDMI is only available in select models;
- optical and coaxial digital connector;
- HDMI – together with video signal;
- mini Jack connector (3.5 mm) for connecting headphones.
Video is transmitted via the following connectors:
- 1 RCA, composite - the oldest and lowest-quality method of transmitting a video signal. Suitable for transfer only analog signal with low resolution. Even when transmitting a video signal from a DVD, which also does not have a very high resolution in modern times, the difference between the signal transmitted through one “tulip” and other methods will be noticeable. Nevertheless, it is always available in all players, since all televisions are equipped with it;
- S-Video is a four-pin connector that provides signal transmission with better quality compared to composite RCA. It is a development of RCA, since the video signal is also transmitted over one wire;
- SCART is a rectangular connector with 21 contacts. Used to transmit video, audio and control signals, it is almost never found now;
- Component interface – transmits video signal through three RCA connectors. Allows you to receive more high quality image, than that which is transmitted through one “tulip”, since it transmits an analog video signal over three channels. Only HDMI is better than this connection method;
- HDMI is the best and most popular way to connect a player to a TV and audio system today. It transmits video and audio signal in digital form, providing high-quality video signal transmission high resolution, which is impossible when using a component output and, especially, one “tulip”.
Almost all modern players are equipped with a USB port used to connect flash drives or portable hard disks. It is needed in order to use the DVD player as a playback device multimedia files from USB drives. As a result, the player owner can play almost all videos, provided that the device supports all formats.
In most cases, manufacturers place several ports on the rear panel, from which the owner chooses the one that is more convenient for them. There is enough space on the back wall to install all the above listed connectors. Therefore, usually their number and specific types depend on the cost of the player. Cheap models usually do not install HDMI, making do with transmitting the signal via RCA connectors (“tulips”).
Features of DVD player control
DVD players are controlled using buttons on the body and a remote control. The first option is used as a backup, since ordinary human laziness will never force you to get up from the couch to press buttons when there is a convenient remote control.
The control system is based on a simple on-screen settings menu that allows you to select required format images, sound output, video signal settings, etc.
From the control panel, the user controls the selection of multimedia files from the storage medium, launching movies or bonus materials from the DVD menu, sets the playback speed, starts rewinding, selecting audio tracks, etc.
Each manufacturer offers its own vision of the menu and control panel, so when choosing a player it’s worth looking at how convenient its design is for you. Typically, remote controls are made small and fit comfortably in the hand, but the location of the buttons is entirely the idea of the manufacturer’s engineers and designers. Some of the players support the HDMI-CEC function, which allows you to control the TV and player with one remote control.
There are a minimum of buttons on the player body that allow you to perform basic control functions: turn on, turn off, select a movie or chapter, and rewind. All other commands are also given using buttons on the case, but their logic is often made in such a way that it is easier to use the remote control.
Additional functions
Important additional function, which is very useful when using the player with modern TVs With large screens– the presence of an image scaling function. The fact is that the DVD format means that the video is recorded with a resolution of 720x576 or 720x480 pixels. If you run such a video on a screen with FullHD resolution and a large diagonal, the picture will not look very impressive. To correct this situation use
The basic assembly of the operating system is equipped with its own DVD player, but not every user has this software like. Due to constant changes and updates that are carried out by Microsoft, the application becomes more attractive to skeptical users and they decide to download a free DVD player for Windows 10. The developers’ task is to make sure that the functionality of the application is completely satisfactory for each specific user.
Our option is absolutely free and can be easily installed on various personal computers and laptops.
In general, applications that play all kinds of media files are extremely necessary components, without which it is difficult to imagine a modern personal computer. Using the DVD player presented above, you can easily start playing different videos films and videos. Each version has its own features that distinguish one software from another. For comparison, you can take a player that plays both audio and video. It is good and convenient in its own way, but there is no point in comparing it with our application, which is designed for playing video files.
If you decide to download for free DVD player for Windows 10, then you can watch the video in high quality and the following options will be available to you:
- Watching full-length films in good quality;
- View media presentations.
The developers made sure that the program can play almost any video format. Of course, for this you must have all the codecs on your PC.
Is audio playback possible?
Although the main functionality of the application is aimed at ensuring the playback of video files, users will not have problems running some audio. There are very few applications that can equally satisfy user needs in terms of playing media content. Another such program is a convenient and practical application in every sense.
What else is interesting about this DVD player?
Some users use it on their personal computers and laptops this program to view photos and create presentations. Without a doubt, this highlights the functionality of the software making the program more attractive for use as a home theater or for educational purposes.
It’s worth downloading a free DVD player for Windows 10 and installing it on your device for those who don’t have a special drive for reading. optical disks. Because with the help of the program you can play absolutely any files recorded on a flash drive or downloaded from the Internet. Moreover, the size of the files does not matter; you can run even very large ones.
Thanks to the complete Russification of the program, there should not be any significant problems with installation and use. If you want to install the program on your computer, use our Internet portal for quick and secure boot installation files. We send you to the official website, so the installer will be the latest and in the latest version.
It's no secret that Windows 10 no longer includes the ability to play DVDs out of the box. Starting with Windows 10, Microsoft has removed the MPEG-2 codec (and a number of other codecs) from Windows Media Player and other applications. Since codecs must be licensed, their removal allows the company to reduce operating system development costs.
Admit it, you wouldn’t buy this app, but if it’s possible to get dvd player Windows free?
The official solution provided by Microsoft is the app from the store - Windows DVD Player, the player costs $14.99.
While DVDs are not as popular as they once were, in the modern era of streaming, there are many other media content delivery systems available. However, there are many users who have a large DVD collection that can be viewed anytime and any day.
If you have a DVD drive, you'll probably want to install a new DVD application. Windows player.
This method does accessible application player DVD Windows to all updated users with operating system Windows system 10.
How to Install DVD Player from Microsoft
- First you need to download the files - kb3081704 for Windows 10 DVD Player:
- Now open File Explorer and Create two directories (Folders), C:\ Temp And C:\ Temp2
- Extract the file from the downloaded archives windows 10.0- kb 3081704- x 64. msi if you have 64 bit system, Or, file windows 10.0- kb 3081704- x 86 if you have a 32-bit system, to the created Temp folder on the disk - C :\ Temp
- Open command line or with administrator rights (copy and paste the line with the bit size of your system) and press Enter:
msiexec /a c:\temp\windows10.0-kb3081704-x64.msi /qb TARGETDIR=c:\temp2
msiexec /a c:\temp\windows10.0-kb3081704-x86.msi /qb TARGETDIR=c:\temp2
If you did everything correctly in the folder, files will appear as in the picture below:
- Open PowerShell as administrator (and copy the following there / it's all one line):
Add-AppxProvisionedPackage -Online -PackagePath c:\temp2\InstallDVDAppxPackage\cd0c0ffe0ee94518833e70b1e931fcff.appxbundle -LicensePath c:\temp2\InstallDVDAppxPackage\_License1.xml
After running the command, close PowerShell and delete the folders Temp And Temp 2.
Now you have the official one installed Windows DVD-player. Click on the Start menu button and find in the list installed applications - DVD record player Windows .
All.
The Microsoft website states that - you are eligible to receive the Windows DVD player application for free when you upgrade to Windows 10 from the following Windows versions:
Windows 7 Home Premium Windows 7 Professional Windows 7 Maximum Windows 8 with Windows Media Center Windows 8.1 with Windows Media Center
