First connection to the zyxel keenetic lite 2 router. Setting up a PPTP connection. Description of the Zyxel Keenetic Lite II router

By signing a contract with some provider and purchasing the appropriate equipment for organizing wireless home network In order to access the Internet, the user is faced with the need to adjust electronic devices.

Of course, you can use the services of specialists, but, as popular wisdom says, if you want it done well, then do it yourself. The following guide will help you implement this statement, the main thing is to show a little care and take some personal time.

But if there is a subsequent need to carry out such operations, thanks to experience, the time required to enter parameters into the device’s web configurator will be required significantly less. At the same time, you can save it on waiting for the arrival of the master.

Preliminary activities

Careful preparation at the beginning allows you to successfully achieve your final goal. By consistently performing all stages of the procedure, from connecting the device to adjusting it, even a complete “teapot” is guaranteed not to create significant difficulties in setting up the ZyXEL Keenetic II Internet center.

Connection

At the first stage, you should remove the device from the box with all the elements offered for it. Then proceed to the connection procedure, and to do this follow these steps:

Preparatory work with the computer

Now you need to make sure the settings are correct network card. This procedure is also simple when you have before your eyes step-by-step algorithm actions.

The following few steps are required:

Now you should proceed to entering parameters into the router’s web configurator in order to establish a connection with the World Wide Web.

Login to the web configurator

The modem setup process is carried out in a browser window, so you can enter all the necessary parameters using a PC or mobile device on any platform.

To enter the web interface, you must complete these steps:

Click “Enter”;
Next, click “Web Configurator”;
If the firmware advises you to change the authorization parameters at this stage, then it is better to agree and enter the ones you created yourself original name and a code (it is recommended that if you have a printer, print them out immediately or manually write them down in a personal notebook, since even an old piece of paper remembers information better than the best human memory);
After completing all the steps, the main menu of the device will appear on the display, providing access to its settings.

What to do when you fail to log in?

If the entered code did not allow you to enter the web interface, it means that it has already been changed earlier previous user or in a store, by some curious customer who managed to tinker with the equipment settings.

The problem can be solved using a standard rollback technique; as a result, the factory password and login will be in effect again.

To reset parameters to factory state, follow these steps:

Procedure for entering network parameters

After completing the above steps, the main office is displayed on the monitor, in which all manipulations with the network settings are carried out.

However, before you start entering parameters, you need to write down the access protocol used, for example, PPPoE, L2TP, etc., from the signed contract with the communication provider. You also need to clarify the presence of fixation MAC addresses supplier. What IPs are used, for example, dynamic IP or permanent path.

Is it also necessary to register the IP and name VPN servers. That is, find out all the parameters that need to be entered into the interface. If the user does not have the contract in hand, then when the client calls, the provider provides all information by phone, number technical support which are indicated on official resource companies.

In the web interface you need to do the following:

Wi-Fi setup

Solving the question of how to set up a secure wireless point Wi-Fi access, won't take much time.

The developers have made life as easy as possible for owners of second-generation ZyXEL Keenetic devices and have ensured that immediately after the first launch the device creates the most reliable Wi-Fi network using the WPA2 standard.

At the same time, in automatic mode a channel is selected that best suits the current environment.

Therefore, usually there is no need to change anything in the web configurator. To enter the broadcast network, you only need to know the name and code, and as mentioned above, they are written in the documents in the user’s hands.

Those who want to change set parameters, can easily do this by logging into the device interface.

The sequence of steps, using the Keenetic Lite model interface as an example, is as follows:

Setting up to watch digital television

For Keenetic internet centers Implemented by 2 developers convenient adjustment IPTV, but only in the latest firmware modifications.

The firmware has a built-in “TVport” function so that you can specify a separate port dedicated to the set-top box. If the equipment software has not been updated for a long time, then it should be updated before starting the setup procedure.

To find out current modification Software, you need to open the “ System Monitor" After that, go to the “System” section. Next, in the “System Information” section, look at the firmware version.

Then you can upgrade the firmware through the web configurator. The default settings allow these routers to immediately view interactive television. Therefore, the user is not even required to delve into the web configurator.

Operation of the Keenetic access point via an ADSL modem

When used to exit into global network ADSL modem that does not have a Wi-Fi broadcast function, then a second generation Keenetic device will help you create a Wi-Fi line.

The ADSL modem is connected to the Internet provider, and the device from ZyXEL just needs to be connected to the modem by wire and set to wireless access point mode in the web configurator.

Thus, Keenetic will transmit the bridge. The figure below shows a diagram of the operation of the equipment. In this mode, the device operates as a repeater.

To set up the repeater, you need to complete the following steps:

Port forwarding

If you wish, enter through world wide web to the interface home equipment, you can forward ports in the ZyXEL Keenetic 2 web-configurator or, as professionals call it “Broadcast network addresses(NAT)".

Steps to follow:

In order to get to the router’s web interface, you need to open your Internet browser and type 192.168.1.1, User Name in the address bar admin (Username), Password – 1234 (provided that the router has factory settings and its IP has not changed).

Changing the factory password

For security reasons, it is recommended to change the factory password. Default: Login admin, password 1234. In the router interface, you need to go to the “ System", Further password. In field "New Password" enter New Password. It must be repeated in the next field. Next, save the settings by pressing the button “ Apply».

Setting up Wi-Fi on the router

Select a section at the bottom of the page WiFi.

In the window that appears, in the field Network name (SSID) enter the name of your network (any)
In field Network protection select WPA2-PSK
In field Network key enter your password to access the network (any)
In field Channel: select Auto
Apply.

Setting up an Internet connection

NAT when automatically obtaining an IP address (DHCP)

Select a section Internet, then point IPoE and click the Add interface button:

Use connector- a check mark on the one into which our Internet cable is plugged into in this case last port
Send VLAN ID tags- put a tick there
Enable Interface- so put a tick
Description- for example internet
IP Address and Subnet Mask- leave empty
Get an address via DHCP- put a tick
This direct connection to the Internet- and here we put a tick

Setting up PPTP (VPN) when automatically obtaining a local IP address

At the top of the page, select the tab Authorization.

In field Type (protocol used) select PPTP
In field Connect via select Broadband connection (ISP)
In field Server address enter pptp.freedom
In field Username enter your login to access the network from the subscriber registration card
In field Password enter your password to access the network from the subscriber registration card
In field Authentication algorithm select CHAP.
After filling in all fields, click the button Apply.

Setting up a PPPoE connection (Rostelecom, Dom.ru)

InternetAuthorization»

Type (protocol): PPPoE
Username : Your login according to the contract
Password: Your password according to the agreement
Configuring IP parameters: Automatic
Service Name, Hub Name, Description- may not be filled in
In field Authentication method select Auto
Save the settings with the button "Apply."

Setting up an L2TP connection (Beeline)

In the router interface, you need to select the tab on the left “ Internet", in the list that opens, select " Authorization»

Internet Access Protocol: L2TP
Description: connection name
Server address: server name or address (specified in the contract)
Username : Your login according to the contract
Password: Your password according to the agreement
Authentication method: Auto
Save the settings with the button "Apply."

The second generation of ZyXEL Keenetic Lite routers differs from the previous one in small fixes and improvements that affect stable operation and ease of use network equipment. The configuration of such routers is still carried out through a proprietary Internet center in one of two modes. Next, we invite you to read the guide on this topic in detail.

Most often during ZyXEL works Keenetic Lite 2 is used not only wired connection, but also a Wi-Fi access point. In this case, even at the stage of choosing a location for installing equipment, you should take into account the fact that obstacles in the form of thick walls and working electrical appliances often provoke deterioration of the wireless signal.

Now that the router is in place, it's time to connect it to a power source and insert the necessary cables into the connectors located on the rear panel. Yellow LAN is selected where it is inserted network cable from the computer, and the WAN port is indicated in blue and a wire from the provider is connected there.

The last stage preliminary actions there will be editing Windows settings. The main thing here is to make sure that the IP and DNS protocols are obtained automatically, since they separate setting will be carried out in the web interface and may provoke the appearance of certain authentication conflicts. Read the instructions provided in our other article at the link below to understand this issue.

Setting up the ZyXEL Keenetic Lite 2 router

We have already said earlier that the procedure for setting up the operation of the device is carried out through a proprietary Internet center, also known as a web interface. Therefore, you first log into this firmware via a browser:

Next, you successfully log into the Internet center and the developers offer two configuration options to choose from. Quick method through the built-in Wizard allows you to set only the main points wired network, security rules and access point activation will still have to be done manually. However, let us look at each method and individual points in order, and you decide what would be the most optimal solution.

Quick setup

In the previous paragraph, we focused on which parameters are edited in quick configuration mode. The whole procedure looks like this:

There is no need for further adjustment of the router if, except wired connection you won't use anything else. As for activating a wireless access point or editing security rules, this is done through the firmware.

Manual configuration in the web interface

First of all, the WAN connection is adjusted when you bypass the Wizard and go straight to the web interface. Let's look at each action in detail:

This is the procedure in the category "Internet" completed. Finally, I would like to note only "DyDNS", through which the service is connected dynamic DNS. This is required only for owners of local servers.

Wi-Fi Configuration

We smoothly move to the section on working with wireless point access. Since its configuration was not done through the built-in Wizard, the instructions below will be useful to all users who want to use Wi-Fi technology:

Only a few steps were required to ensure correct operation wireless internet. This procedure is quite easy and even an inexperienced user can handle it.

Home group

In the previous part of the instructions, you may have noticed a mention of a home network. This technology unites all connected devices into one group, which allows you to transfer files to each other and have access to shared directories. Special mention should be made correct configuration home network.

Safety

An important point is the actions with the router’s security policies. For the router in question, there are two rules that I would like to dwell on and explain in more detail.

We will not consider the DNS function from Yandex separately, since we mentioned it in the section about quick setup. Let us only note that at the moment the tool does not always work stably, and sometimes glitches occur.

Final stage

Before leaving the Internet center, you need to spend time setting up the system; this will be the final stage of the configuration.

After completing the configuration, it will be enough to reboot the device for all changes to take effect, and then proceed directly to accessing the Internet. By adhering to the above recommendations, even a beginner will be able to get the ZyXEL Keenetic Lite 2 router working.

The Keenetic Lite II Internet Center serves primarily for reliable and convenient connection your home to the Internet, the provider’s network and its services, such as IP television. It unites the home computer equipment to the network and provides the opportunity to simultaneously access the Internet from several computers or gadgets, play online games, participate in file-sharing networks, connect smartphones, tablets and laptops via Wi-Fi, use TVs with Smart function TV. For guest Wi-Fi devices, you can enable a separate wireless network with Internet access, but without access to information on the home network. Built-in firewall Internet Center protects all devices on your home network from attacks from the Internet.

Configuring a computer's network card before installing a router:

Setting up the ZyXel Keenetic Lite II router

We will basically configure the ZyXel Keenetic Lite II router via a web interface, which allows us to fine-tune all required parameters. To enter the web interface of our Kinetic Light, you need to use any computer browser ( Opera Internet Explorer, Mozilla) V address bar go to the address: http://192.168.1.1 (the ZyXel Keenetic Lite II router has this address by default). You will see the welcome message from the Seixel Internet center on your computer screen:

To log into the Keenetic Lite web interface you will need to enter your username and password, and then click on Entrance. Default: Username– admin, Password - 1234.

Choose Connections to the Internet and other networks
Click double click Broadband connection

To do this in the field Configuring IP settings you need to set the option to Manual(this option involves manually specifying TCP/IP parameters for a connection via PPTP, but some providers can provide them automatically).

In case of manual assignment of parameters in the field IP address you must indicate the IP address that is issued by the provider when installing the Internet (see your user manual or contact technical support).

In field Network mask you must specify the subnet mask value.

In field Main gate you need to specify the default gateway address.

In field DNS 1(domain name server) we will indicate the value of the preferred DNS server.

Then below in DNS 2 indicate the value of the alternative DNS server.

In the Use field MAC address You can enter your own special MAC address (physical address) for the ZyXel Keenetic Lite II router. Since every network device has its own unique MAC address, this option allows you to avoid calling support if you change network equipment. You can set a MAC address in the router that is identical to the MAC address of your computer on which you were working before installing the router. The default option will leave the ZyXel Keenetic Lite II router with its “native” MAC address. The “native” MAC address is indicated directly in the menu, in addition, the MAC can be found on a sticker located on the bottom of the router (six pairs of numbers and letters). Below this option there is the option Take from computer, with the help of it ZyXel itself will pick up the MAC address of the network card of the computer from which you are accessing this moment configure the router. This will save you from having to enter the MAC address manually (useful if this computer and was connected to the Internet before installing the router). In addition, using the Set option, you can enter a different MAC address value for the Internet center. If you want to use a router with a “non-native” MAC address, then take advantage of this opportunity! If you want to register the router’s MAC address, you will have to call 6-13-13 or 4-46-19 and tell it the “native” MAC address of the ZyXel Keenetic Lite II.

In field MTU size You specify the size network package, the value can be left as default (or set to around 1100-1300 in case of an unstable connection).

Do not reduce TTL– does not allow the router to reduce the TTL parameter by one when traffic passes through NAT.

Configuring ZyXel Keenetic Lite II in PPTP VPN mode

In the PPPoE/VPN field select Add connection

PPTP.

Connect via: Broadband connection

Server address: you must specify the address of the VPN server (vpn.rgtsparus.ru).

In field Username

In field Password you must specify a password to connect to the VPN server (the password is the same as the password for logging into your personal account).

Configuring ZyXel Keenetic Lite II in PPPoE mode

Type (protocol) select an option: PPPoE.

Connect via: Broadband connection

In field Username you must specify the login for the VPN connection (the password for the VPN is the same as the password for logging into your personal account).

In field Password you must specify a password to connect to the VPN server (the password is the same as the password for logging into your personal account)

We leave all other data unchanged.

After filling out all the necessary options, all that remains is to click on the button Apply to save the settings of your ZyXel Keenetic Lite II.

Settings Wi-Fi connections in the ZyXel Keenetic Lite II router (Kinetic Light)

In the Enable access point field, check the box
Network name (SSID): Write the future name of your network
Network protection: WPA-PSK + WPA2-PSK
Network key: Create your own network key of at least 8 numbers, letters (Latin), symbol

Leave the remaining fields unchanged. Click Apply

On this router, you can create several connections that you can designate with certain priorities. If one connection is broken, for example PPPoE, the second one will automatically start PPTP connection with priority 900 (see figure above). When the break is restored, PPPoE will start again.

That's it for the setup Internet center ZyXel Keenetic Lite II can be considered finished. Now you can try connecting your laptop or computer to the router via Wi-Fi using the assigned password.