Programs for cutting sheet materials. Cut out parts in a sheet of chipboard using online and offline computer programs. Various types of allowances

Automated production system PractiCAM™ is focused on the production of products for ventilation systems from sheet and coil metal, as well as from pipe blanks. PractiCAM™ works with plasma and laser CNC machines program controlled(CNC), as well as with stamping, spiral and coordinate-cutting machines. The program has great functionality for cutting sheet metal, i.e. It is focused not only on the production of air ducts, but also flat parts, signs, weather vanes, roof elements, etc.

Main advantages PractiCAM systems™:

	Creation of air ducts of any type, as well as any other elements from sheet and rolled metal, and pipe blanks
	System libraries PractiCAM™ very extensive and unparalleled. They contain over 4000 fittings and over 1600 parameterized flat parts. Despite such diversity, the system libraries PractiCAM™ are still increasing (each time you download a new version of our program, new elements will be waiting for you). In addition to existing libraries, we can create for you as many different fittings, flat parts and other elements as you wish. We will make the parts you need and send them to you as soon as possible. as soon as possible(as a rule, the development of a new part, depending on its complexity, takes from one to three workers days).

	Compatible with any equipment
	System PractiCAM™ Supports many models of plasma and laser CNC machines. It can also work with punching machines, spiral punching machines, jig punching machines, tube cutters and readers. barcode. If your machine model is not yet in our library, then we will quickly write a post-processor for you completely free of charge, which will connect our program with your equipment.

	Instant and accurate cost estimates
	During your work, the system PractiCAM™ continuously creates an accurate cost estimate of all parts manufacturing costs. The full calculation takes into account the cost of material, labor costs for manufacturing parts, the cost of all fastening elements (bolts, screws, tires, rivets, etc.), as well as the cost of various accessories (blades, rods, flaps, etc.). The American tables of the SMACNA standard are given as an example, but you can create your own regulatory tables for accounting for labor costs at your enterprise, taking into account the specifics of your production.

	Export and import of information in generally accepted formats.dxf, dwg and.csv for communication with software products of 1C, Microsoft, Autodesk companies
	All information about the metal spent, consumables and components contained in the system PractiCAM™ can be translated into a .csv file format, which is supported by 1C: Accounting and Microsoft Excel programs. This makes it possible to calculate the cost of all your products using accounting programs. System PractiCAM™ can work with .dxf and .dwg files, which allows you to import drawings from AutoCAD programs and Compass, as well as export cutting maps, fitting patterns and flat parts to these programs.

	Importing orders from 1C:Accounting program
	In the 1C: Accounting program, you can create orders for cutting fittings, indicating the names of fittings, their quantity, the material from which they should be made, technological parameters, names of allowances, etc., and send them to the system PractiCAM™. Having received the order, the system PractiCAM™ automatically finds the specified fittings in its libraries and applies them to given parameters and lays out the fitting patterns on sheets of metal. After automatic installation, control commands for your equipment are generated, as well as various reports and labels.

	Metal saving
	It is possible to use leftover sheet metal suitable for cutting out any products from them, and maximum use leaf area. For this purpose, the “Warehouse” functional module has been added, which allows, after laying the main work parts on metal sheets, to automatically add flat parts from a pre-created list to unused space.

	Possibility of automatic stacking of products using a combined cut
	IN PractiCAM™ There are two options for automatic stacking of products: regular stacking and stacking with a combined cut for products that can be combined on one side.

	Fully Russified
	In addition to the Russian language, the system PractiCAM™ translated into English, French, Spanish, Chinese and Korean.

	Various types of allowances
	Allowances (connectors, locks, joints, seams) and notches contained in large quantities in system libraries PractiCAM™ can be created in any geometric shape, fully parameterized and editable. Graphics editor provides ample opportunities for creating and editing allowances and notches.

	Generating reports
	System PractiCAM™ provides you with a wide selection of standard report templates. In addition to this, you can create your own reporting forms in any convenient format and with any type of layout. The main thing is that in the report you can report any information contained in the system PractiCAM™.

	Creating Labels
	Mark parts in the system PractiCAM™ easy and convenient. We present to your attention various templates labels, but if they don’t suit you for some reason, then you can create your own own template. Add any information to your labels: your organization’s logo, barcodes, 3D images of parts, any part parameters you are interested in; edit these inscriptions in any style and font size. You can make a label for any fitting and flat part.

	Useful Specifications
	Specifications (SNiPs) of the system PractiCAM™ allow you to define all the features of your production standards when working with different products, allowing you to unify production, automate the entry of products for production and reduce the number of errors during entry, thereby increasing your productivity, and with it your profit. You can create your own rules for the production of products that are used in your enterprise.

	Availability of libraries of double-wall fittings
	In system PractiCAM™ Libraries of double-wall fittings are available. They are used in cases where it is necessary to increase the level of heat and noise insulation. For each double wall fitting, insulation can be cut to fit between its walls.

	Possibility of manual and automatic segmentation for large products
	System PractiCAM™ allows you to segment (break into separate components) products big size, which do not fit on a sheet of metal. You can set segmentation rules for each product yourself or entrust this process to the program.

Benefits of our technical support:

The best product support - at the request of users we develop and add new ones software modules, we create new fittings and parametric flat parts (within 1 – 3 days depending on the complexity of the product), we add new methods of cutting fittings to existing ones.
Free education working with the program.
Regular update PractiCAM™ — new release comes out at least once every 2 weeks.
Development and addition of new labels and reports, placing on them the information necessary for the user.

Currently developed a new version programs PractiCAM™. Its main difference is that the program is now divided into many functional modules, which can be turned on and off in various combinations, reducing or increasing the set of functions performed by the program. Depending on the number of included modules, the price of the program is determined. PractiCAM™ It is still possible to purchase the entire program with all its capabilities, but you can also buy one of the standard program packages (each of which is a truncated version of the system PractiCAM™), or standard package with additional options.

Standard packages PractiCAM™:

PractiCAM™ for typical parts.

Use libraries of parametric flat (two-dimensional) parts, create flat parts using a graphic editor.
To Work with graphic model parts, specify dimensions, material and thickness.
Use multiple layers when creating a part.
Import files with extension .dxf, .dwg ( AutoCAD systems, Compass, etc.).
Apply automatic stacking parts onto sheets of metal using various algorithms, including combined cutting.
Lay parts on sheets of metal manually.
at the exit).

PractiCAM™ for ventilation.

Current Package allows the user:

Use libraries of shaped products (fittings).
Work with a three-dimensional graphic model of a fitting, set dimensions, allowances, material, determine the method of cutting the fitting.
Work with the library of fittings accessories, set dampers, stiffeners, couplers, rotary blades.
Use various marking notches, automatically generate bend lines, create marking lines.
Create a library of materials used, indicating the material thickness and type (sheet, roll).
Create a library of used allowances (connectors, locks, joints).
Apply automatic laying of product patterns on sheets of metal using various algorithms, including combined cutting.
Lay product patterns on sheets of metal manually.
Based on the installation results, generate and print installation maps.
Based on the laying results, automatically generate a sequence of control (CNC) commands for the cutter.
Set cutter parameters (table dimensions, table positioning and orientation, size and shape of cut at entry and cut
at the exit).
Determine the method of transmitting control commands to the cutter (via a file or COM port).
Automatically segment (cut into pieces) large-sized patterns.
Automatically add allowances when segmenting patterns.
Create and edit seam allowances connecting segmented parts of patterns.
Create tables for recalculating fitting section parameters and apply them when creating fittings.
Import/export files with the .pmx extension (PractiCAM™ program files).

PractiCAM™ Classic.

This package combines the PractiCAM™ for Generic Parts and PractiCAM™ for Ventilation packages and provides all the features listed for these packages.

Scroll additional options(program capabilities) for packages is given in the table.

If you want to learn more about PractiCAM™, then we can do it for you completely free of charge. Skype help or TeamViewer to conduct a demonstration of the program at a time convenient for you, at the same time answering all your questions. Also, specifically for your machine controller, completely free of charge, at your request, we can write a post-processor and activate PractiCAM™ for you for 1 month so that you can evaluate all its capabilities directly in your work. All you need to do is call us or write a message to our email, or leave your contact information by filling out the following form.

You can cut sheet material manually, but it requires a lot of time and special skills. It is much easier to do this by using related programs. They will help optimize the cutting map, offer other layout options and allow you to edit it yourself. In this article, we have selected for you several representatives who do an excellent job.

Astra Cutting allows you to work with orders by importing their blanks from the catalog. There are only a few templates in the trial version, but their list will expand after purchasing a program license. The user manually generates a sheet and adds details to the project, after which the software automatically creates an optimized cutting map. It opens in the editor, where it is available for editing.

Astra S-Nesting

The next representative differs from the previous one in that it offers only a basic set of functions and tools. In addition, you can only add pre-prepared parts of certain formats. The cutting map will appear only after purchase full version Astra S-Nesting. In addition, there are several types of reports that are generated automatically and can be printed immediately.

Plaz5

Plaz5 is outdated software and has not been supported by the developer for a long time, but this does not prevent it from performing its task efficiently. The program is quite easy to use and does not require any special knowledge or skills. The cutting map is created quite quickly, and the user only needs to specify the parameters of parts, sheets and design the map.

ORION

Last on our list is ORION. The program is implemented in the form of several tables into which you enter necessary information, and then the most optimized cutting map is created. From additional functions There is only the option to add an edge. ORION is distributed for a fee, and trial version available for download on the official website of the developers.

Cutting sheet material is a rather complex and time-consuming process, but this is if you do not use special software. Thanks to the programs that we reviewed in this article, the process of drawing up a cutting map will not take much time, and the user is required to make a minimal amount of effort.

To cut chipboard, it is recommended to turn your attention to the Astra Cutting utility and download it. This is an excellent application that does a great job with all its features and options. At the same time, the program differs from the service and office applications. If you download Astra Cutting for free, you should know that the software is designed to work in companies engaged in the manufacture of custom-made furniture. In medium and small enterprises free software for cutting chipboard will be indispensable.

The question may well arise: why do you need to download a program for cutting chipboard, because cutting sheets for decorative building structures yourself is not very difficult, the main thing is to have certain skills in this work. In principle, there is a certain meaning here, but only in the case of one-time work. However, professional users who work with such materials constantly free utility Astra Cutting will be simply necessary.

To the number functional features This application relates to the fact that the software for cutting chipboard allows you to work with an entire order, in which there are many products, which, in turn, consist of a certain number of parts. If you download the program for free, you will be able to conduct own library spare parts, products and parts. This function will be very useful for all users, especially if buyers choose to order standard parts consisting of standard spare parts. In addition, it becomes possible to maintain a warehouse of materials end-to-end, in which case the sheets of chipboard remaining after work are sent to the warehouse to fulfill the next order.

Excellent chipboard cutting program free download Astra Cutting

You just need to download the Astra Raskroy program for cutting chipboard for free to generate all necessary cards cutting in automatic mode. Naturally, the program takes into account all the organizational and technological parameters of the order, for example, the minimum distance between saws, type of cutting, accounting for through materials, trimming the edge of the sheet, cutting width and much more. If necessary, users can easily make certain adjustments, because for this there is a special chipboard cutting map editor.

Another positive quality this application is that Astra Cutting can be used to calculate and analyze the production of edges of a material, regardless of its nature. Accordingly, if you download the software, you can receive all the information regarding the production of furniture, cutting or grinding glass, as well as cutting edges for subsequent welding.

If we talk about programs for sawing wood-based sheet material (chipboard), then there are many programs for cutting chipboard sheets, you can, for example, use "Pro100 cutting".

In the furniture business, the program for cutting chipboard sheets plays a rather important role, because the correct sawing of chipboard sheets is one of the most important qualities, in the manufacture of furniture.

Order cutting laminated chipboard now!...

Determining the quality of the cut is not difficult: if there are no chips on the workpieces, we can conclude that the cut was done properly. In the furniture business, much attention is paid to cutting sheet materials. Products made from particle boards do not look very good if there are saw marks on the visible side.

Today, in furniture workshops everything is automated to the maximum extent possible. For example, a number of machines are used in production that cope with this task quite successfully. These include equipment such as format cutting, filler and edge banding machines.

To quickly cut particle board, experts use a cutting program such as Pro100 cutting.

Note the sawing of particle board sheets on a Festool saw. If we take, say, laminated chipboard, then it is better to use a format cutting machine, since this machine is convenient for sawing laminated chipboard (you can cut up to a hundred sheets per day). Concerning pricing policy, then it depends on the company that offers this service.

You can also use a Festool plunge-cut saw to cut chipboard sheets. It is not a very expensive option. Due to the fact that the above-mentioned saw has a good price/quality ratio, this option is popular. There is also the following programs sawing chipboard, which are worth paying attention to.

Let's look at them in more detail:

"BASIS-RESCROY" are unique, modern programs, with visual and clear interface and has a powerful mathematical algorithm for optimal cutting of any materials used in furniture production. These Basis-Cutting programs are included in the Basis-Furniture Maker complex.

The following cutting program, which is also popular - CUTTING. It is designed to optimally cut the material into parts, depending on what is needed. If you need a rectangular part, this program will help you make such a part; if you need a linear part, it will cut a linear part. This program is used not only for woodworking, but also for furniture production, metal cutting, and so on. Thanks to the high-grade algorithm that is included in the program, cutting is carried out with minimal waste.

Another one interesting program cutting is a program Astra-D. It is intended for the purpose of automated cutting of particle board. It is also used for cutting other materials, such as plastic, glass, metal and others. In addition, the Astra-D program increases efficiency and reduces the time spent when creating a cutting map. The program is designed for operational Windows systems. The user will be able to master the work in this program and simply understand the menu system.

Now let's look at the program BestCut. This program facilitates tasks related to cutting chipboard, calculating the price of materials and work. With its help, you can get a cutting diagram for chipboard and equipment that will be used in this procedure. Also, this program will allow you to obtain accurate cutting maps for chipboard sheets into rectangular parts. An important fact is that the features that will have to be encountered in the process of processing chipboard sheets are taken into account. Work can be supported through local network, and this is also quite convenient.

FieryCut sheet metal cutting softwareincludes the full range of functions of sheet cutting technology on any CNC cutting equipment. Auto optimal cutting metal reduces the cost of raw materials and greatly increases the productivity of the technologist. The program comes with a post-processor for any CNC cutting equipment. This way you can connect the equipment, even in the absence of experienced specialists. We also implement additional requirements specific to a given organization or equipment.

The user creates only the outlines of the parts. TOgeometry control, economical cutting of metal sheets andthe formation of control programs for CNC machines is carried out automatically using FieryCut.

The FieryCut CAD/CAM system consists of three modules:

Creating part geometry;
Cut the sheet ( optimal placement contours of parts on the sheet);
Generating a control program.

Geometry of parts

FieryCut, unlike other similar applications, includes geometry control, which speeds up the search for errors. Using the Part Geometry module, the user creates contours details ( blanks) based on geometry created in AutiCAD, including lines, polylines, arcs and circles.

Automatic creation of workpiece contours from segments, arcs, circles and polylines;
Support for unlimited nesting of contours;
Support for open paths and text;
Automatic control geometry in the process of creating contours, making it easier to correct errors;
Calculation of surface area and mass of workpieces;
Import geometry in DWG/DXF format;
Saving contour information to a DWG file.

Cut the sheet

FieryCut implements automatic cutting metal sheet with high material utilization rate (CMM).
The work begins with the formation of a task in which the user specifies the dimensions of the sheets or calls DWG file arbitrary business waste, and also generates a list of parts.
ABOUT The main functions of the "Sheet Cutting" module:

Automatic placement of parts on sheets of any shape with a specified distance between contours;
Placing parts inside holes and slots of other parts, if option purchased"Figure cutting" (see figure on the right);
Consideration of placement priority;
Taking into account permission to turn, including setting the permissible angle of rotation;
Editing the placement of parts (moving, rotating, adding, deleting);
Generating a report on placed parts and CMMs for each sheet.

FieryCut is successfully used to generate cutting plans for all sheet materials (stone, chipboard, fabric, leather).

Instructions (PDF format )

FieryCut Options
	FieryCut-C	FieryCut-R	FieryCut-RC	FieryCut-A	FieryCut-full
Geometry of parts
Rectangular cutting
Figure cutting
Control program generation
Cost for the CIS, (rub.)