How to restore factory Windows on a laptop. Windows from scratch: how to restore the system to factory settings on a laptop. How to determine the presence of the reset function

In today's article we will talk about returning Acer, eMachines and laptops to factory settings. Packard Bell. Initially, I planned to write separate articles on them, but later decided to make do with one.

The fact is that eMachines and Packard Bell are the same Acer and the recovery procedure is only slightly different in visual terms, and all the restoration steps for laptops released under these trademarks are almost identical, so I’ll just point out one single nuance along the way .

So, before you begin the procedure for restoring your Acer, Packard Bell or eMachines laptop to factory condition, please read the article first if you have not read it before, as it describes the preparations that need to be made before you begin restoring your laptop from the system recovery partition. Further actions are described on the basis that you have followed all the recommendations I gave in this article.

Well, don’t rush to start restoration until you read this article to the end.

To launch the utility for restoring Acer, Packard Bell and eMachines laptops to factory settings, use the Alt+F10 key combination. You must press this combination when you turn on the computer, before the operating system starts loading.

To make sure you don't miss this moment, I recommend holding Alt key Make quick, short clicks on the F10 button.

However, for the recovery utility to run this way, the D2D Recovery option must be enabled in the BIOS settings. The setting you are looking for is here:

If you have never worked with BIOS settings and have a vague idea of what it is, I strongly recommend that you run the system recovery environment a little longer, but more in a safe way, standard for many mobile computer manufacturers.

To do this, immediately after turning on the laptop, quickly start clicking the F8 key. This is what they usually do when they want to choose special treatment loading the operating system. We need the following menu to appear on the screen:

As you can see, at the very top there is a “Troubleshoot your computer” item. Select it (if for some reason it is not selected by default) and click Enter key. The files will begin downloading.

Now you will need to specify the user on whose behalf the recovery will be performed and enter the password for the selected user, if one has been set. Enter the required information and click OK.

In the next menu that appears, click Recovery Management.

After this, the recovery utility will launch Packard laptop Bell, Acer or eMachines. As I already said, the differences in their interface are purely cosmetic.

If you are going to use the recovery option using the Alt+F10 key combination, then that's it previous steps are not relevant for you. The process of resuscitating the system from the recovery partition will begin immediately from this step.

So, since we assume that all our important data has been previously saved, we select the option “Restore operating system to factory settings”.

We will be warned about necessary measures precautions that you already know about if you read the introductory article. To continue the procedure for restoring the laptop operating system, click “Next”.

After this, we will be shown information about the hard drive of our laptop. Just click “Next”.

We agree with the next warning that all data will be lost.

After this, the computer will need a little time to complete its preparations...

...after which the process of restoring to factory condition will begin. We're just waiting.

Next, the Acer and Packard Bell laptop will automatically reboot, and eMachines will ask you to click OK to reboot. By the way, I could be wrong, but in my opinion some of the Acer models also ask you to press a button to continue. In general, if you are asked to click OK, click it.

The laptop will do the rest on its own. The system will reboot periodically. Don't bother her. Just wait for the initial start of the restored operating system.

This concludes the lesson on restoring Acer, eMachines and Packard Bell laptops to factory condition.

If my article was useful to you, please recommend it to your friends using the buttons social networks or simply by sharing the link.

Please write “Free Help” in the subject line of your email.

As the letters I received after the publication of the article showed, the seed fell on fertile soil. People write that the article was useful to them, which I am very happy about.

But there are also many letters in which users ask to describe the recovery procedure for laptops from other manufacturers. To this I will only answer what I said earlier: I will definitely try to cover as many ways as possible from various manufacturers. It just takes time and the availability of appropriate laptops.

For this purpose, I use computers that come to me for testing and writing, so there is a good chance that I will soon post detailed instructions for restoration of laptops, produced by the most famous companies.

Today I will talk about how to restore Hewlett-Packard (aka HP) laptops to factory condition. This also includes Compaq laptops, since these companies merged in 2002. Such models are, in general, called HP Compaq, but the presence of a different logo can confuse an inexperienced consumer.

So keep in mind that Compaq is also HP, with similar recovery mechanisms.

However, I would like to draw your attention to the fact that in HP laptops, unlike most devices from other manufacturers, the recovery partition, as a rule, is not located in hidden area, but on a separate logical drive.

I would also like to remind you that all important data from hard drive must be saved first, as they will be destroyed during the recovery process. If operating system your computer has crashed and won’t boot, use the advice in this article.

It must be said that HP laptops provide the ability to save data before restoring, but I prefer to do such things by third party means, therefore, this instruction will give the recovery scenario when all the necessary data is previously saved.

And finally, let me remind you that the recovery procedure must be carried out with a fully charged battery and it is strongly recommended that you connect the laptop to the power supply.

So, in order to begin restoring the system, after turning on the power, we need to start making short presses of the Esc key until the following menu appears on the display:

To launch the recovery utility, press the F11 button.

The utility interface will appear on the display. Select the option “Restore the system to its original state when shipped from the manufacturer.”

We will be offered a choice between saving data and restoring the system. Since we assume that you previously saved the data, select “Restore without creating a backup copy” and click “Next”.

We will be warned to turn everything off external devices. You need to disconnect everything that is connected to the laptop. Even a mouse.

After this, the laptop recovery procedure will begin. The display will show information about the actions performed. This procedure will take long time. You can do other things for now.

Restoring a laptop to factory settings - useful feature, which will be very necessary in the event that Windows stops working correctly. In order not to reinstall the system again, it is very convenient to simply “roll back” to its original state, when the OS was still working properly. In this article, we will look in detail at how to return a laptop to factory settings and answer all related questions.

Resetting parameters can be used instead of resetting Windows installations

If you purchased a PC with Windows, then you need to understand that when you reinstall the system (and you will probably install pirated version), a special section containing all the data necessary to return to factory settings will be deleted. Knowing about this very section, you can completely forget about reinstalling the system. Because it is much easier to take and reset the current state and parameters of the computer than to bother with reinstalling the OS.

All methods for resetting a PC differ depending on the manufacturer's brand. Let's consider the most popular brands presented on the market. Before you begin, you need to fully understand what will happen to your PC and its data after a rollback:

All information located on the disk on which Windows is installed will be deleted. It is recommended to keep all data, files and programs on other logical drives. This will allow you to save your files after the system is restored.
Will be produced full formatting system partition.
The operating system will be restored from the image.
Upon completion of the Windows installation, the installation of drivers and some necessary for operation will begin. system utilities, which were originally on the laptop.

After restoring your PC to factory settings, it will look like you just bought it. If you are happy with everything, then let’s move on directly to how this is done.

If you use an Asus brand computer, then it already has special utility, with which you can easily roll back your PC to its previous state.

The first thing to do is turn off Boot mode Booster via BIOS. To enter the BIOS, press F2 while turning on the computer. Once you get into the BIOS, you can turn off the mode fast loading in the “Boot” tab, simply set “Disabled” next to the desired item. Save and exit. Next, restart your laptop and press F9 during startup. After this, a download window will appear in front of you. The system will ask you to confirm the operation and begin the rollback. When the operation is completed, the PC will reboot.

On HP laptops everything is done in a similar way. Press F11 while PC is starting. In the window that opens, select “System Restore”, there you can save the necessary data. Next, the procedure for returning to factory settings will begin. As in the previous case, the PC will be rebooted and, after that, you will receive the computer in its original form.

For those who use Acer laptops, the scenario is as follows:

While turning on the PC, press the F10 key several times in a row while holding Alt.
Next, you will be asked for a password, the default value is: 000000.
After entering the password, select “Factory Reset”.
The recovery will start.

Also on Acer laptops There is special program eRecovery Management, which performs the same functions only through the OS interface.

On Samsung laptops There is also a corresponding utility called Samsung Recovery Solution. Or you can resort to the classic method. When turning on the PC, press F4 and select “Recovery”, then press “ Full recovery" and "Factory settings". Recovery will begin after you confirm the operation.

And finally, Toshiba laptops. The principle is similar to all those described above. Start the computer by holding down the 0 key. The system may require you to enter a username and password. In the menu that opens, select “Toshiba HDD Recovery Program”. You will need to click “Next” several times and confirm the operation.

Now you know how easy it is to restore your laptop to factory settings. Write in the comments whether this article was useful and how you dealt with resetting your computer yourself.

Often for a solution software problems with functioning modern smartphones or tablets should be carried out Hard Reset (hard reboot) or reset to factory settings android. In many cases, this helps get rid of device freezes due to incorrect operation some applications, junk system files, viruses, etc.

Is it possible to return the phone to factory settings?

The ability to reset data is supported by any Andriod device, so every owner of this system can do it. Before you return the factory settings to your Android, you should understand that at the same time you will completely lose all data except for those recorded on the memory card. It will no longer be possible to restore their capabilities; a rollback of such actions is impossible. If you decide to reset the device to its factory state, then you will lose:

entries in phone book;
applications;
photographs, music, books;
saved logins and passwords for accounts.

How to reset settings on Android

Before carrying out this procedure, it is strongly recommended that you copy via a cord to your computer important files, information (photos, videos, music). It's better to do full backup(copy) of the system so that if reset is unsuccessful, you can restore the functionality of the device. There are 3 main options for how to return Android to factory settings:

through the phone menu;
using a combination of buttons;
service codes.

Reset in phone settings

The easiest way to reset settings on Android to factory settings is through the gadget menu. To do this, the device must work and be able to go to the main section of the system. For all smartphones with Android versions 4.0 or older the procedure is as follows:

Go to the main menu.
Click on the "Settings" section.
Find the "Backup and Reset" section.
Scroll down the page and find the “Reset settings” section.
The system will inform you that the data will be deleted from the smartphone. Click on the line “Reset phone settings” and confirm the desire to “Erase everything”. Items may vary slightly in different models phones, but the names are always similar.

Using service combinations

This method also requires that the device be turned on and be able to proceed to dial a number. Each manufacturer programs its own devices special combinations, which help return to factory condition. This applies to both global brands (Samsung, HTC, Sony) and Chinese inexpensive models. Codes may change over time, they need to be clarified on the manufacturer’s website, sometimes they can be found in the manual for the smartphone. Below are examples of such combinations for your reference:

*2767*3855#;
*#*#7378423#*#*;
*#*#7780#*#.

Key reset using Recovery

Most radical method how to reset settings on android to factory settings - Recovery menu(recovery). This The best way returning the smartphone to its original state if it freezes on the screensaver with the company logo does not turn on. Each device model has standard combination buttons, which switches it to the Recovery menu. Sometimes you have to use recovery if:

The phone's stuttering has become too severe;
the system does not allow you to delete, move or change anything.

First, you should completely turn off your phone. Wait until the buttons and screen go out. Next, you need to find a suitable combination for your model (the combination for HTC and Samsung will definitely be different). You can use one of the options:

“volume down” + “turn on” button, also known as “Power” (the most common combination);
on some LG phones you need to press the keys described above, wait for the logo, release “power on” and then press it again;
“volume up” + “volume down” + “turn on”
"Power" + "Home".

Hold down one of the combinations until you are transferred to recovery mode to reset the device to its factory state. The menu is controlled using the volume up and down buttons. If Recovery version touch, you can reboot and in a standard way(touch the screen). To confirm your choice, press the “Power” or “ Context menu" Next, to reset the phone to its initial state, you need.

Resetting Windows to factory settings or resetting is a function that allows you to return HDD to the “Like from the Store” state: all personal files and personal settings will be deleted, leaving only the standard operating system with default settings.

Why reset Windows?

It should immediately be noted that this feature is present only on computers where the operating system was installed by default. As a rule, these are all branded devices that are sold in stores.

There are 5 main reasons Windows rollback to factory settings:

Sale/transfer of device. In order not to manually delete all personal files on your computer, you can use zeroing. Any buyer will be only happy with a “store-bought” HDD;
Reinstalling the OS. Rollback Windows systems to factory settings – best alternative reinstalling the OS in case of a critical failure;
Littering the operating system and system directories. If Windows was used for a long time, then littering is an inevitable phenomenon in which the OS begins to slow down and work incorrectly;
Driver installation failed. Windows 7 stopped working after installing a new driver - restore to original state will fix a similar problem;
"Rally" of the system. If Windows crashed for unknown reasons, then resetting to factory settings will be the most optimal solution.

Comment. Windows Recovery 7 k standard parameters Only possible with a working hard drive.

How to determine the presence of the reset function

The hard drive of the computer on which Windows is installed by default is marked in a special way. There is a hidden or service section here. It stores a backup copy of the original system with all necessary utilities and drivers. The disk is not visible through Explorer, but it appears in Disk Management. Algorithm:

Comment. The Samsung brand is taken as an example, hence the name of the backup disk Samsung_REC.

The section does not have letter designation and is not available while the user is working with the system. You can view the contents (it’s better not to do this unless absolutely necessary) only by booting the computer from external media, where you can assign a letter to the drive.

Preparing for a rollback

Some manufacturers integrate into the custom shell Windows utility to reset the settings, which allows you to start the recovery procedure while working with the system. But if the OS does not boot due to critical error, then this will not bring any benefit, so all branded devices are equipped with a factory reset tool, which can be launched when the computer starts by pressing a special key.

The image shows a list of common PC models and default system recovery initiation keys:

The preparation procedure includes only two stages:

Do backup copy everyone key files for any third party media(preferably on a flash drive) from all hard drives , if there are several of them;
Check the battery charge on your laptop. It must be complete, since an unexpected power outage can cause a lot of trouble to the computer, including the need to carry the device to the service center. Owners of stationary systems either must be confident in their station, or connect the computer to an uninterruptible power supply.

Recovery using hotkeys

Pressing one of the keys described above on the screen initiates the launch of the recovery wizard. The entire program is adapted to the Russian language, so even inexperienced user There will be no problems using the utility:

Comment. In some cases, the owner will be asked to copy the data to another medium. If the information has already been saved, then this item can be skipped.

Do not forget that it will be impossible to interrupt the procedure. Once started, the process should complete. The duration depends on the performance of the device. On average it takes 20-30 minutes.

Restoring using the built-in utility

As an example, we chose the HP Pavilion G6 laptop, where the program for resetting the settings was installed by default. To begin the rollback, perform the following steps:

After clicking, the utility will provide the opportunity to create a backup copy of the data on external media. We agree or refuse.

Rollback via recovery environment

If Windows does not boot until user interface, then the recovery wizard can also be launched through the recovery environment. For this.