How to create a boot disk in Nero. Creating a boot disk

To create a bootable USB flash drive you will need either an ISO image operating system Windows, either CD or DVD disc There’s also a program that will do everything you need. And of course the flash drive itself. By the way, in my case I used a 2GB memory card + Card Reader.

The task of writing an image to a flash drive can be performed by several programs, one of them is UltraISO and free Win to Flash. I recommend using it like this bootable USB flash drive with its help it will take no more than 3 minutes.

How to make a bootable USB flash drive with Windows?

Next step is the discovery ISO image using the program. To do this, open the menu "File" -> Open and then on your hard drive select required file. It could be Windows image XP,7,8 or the same boot disk. I decided to burn an image of Windows XP (Figure).

Now we need to write the operating system image to USB FLASH. To do this, go to the "Bootboot" program menu and select "Burn image" hard drive". Make sure that there is no information on the flash drive, or format it using a special button. (Figure)

In the window that opens, everything is already filled in for you, and any additional settings not required. All that’s left is to press the record button. The recording time on a 2 GB flash drive lasted approximately 2 minutes at a speed of 6.3MB per second.

That's all. Restart the computer, go into the BIOS, set the boot priority from the flash drive, and now you can install the OS.

Now optical discs you don’t need it. In the same way, you can burn games, any other boot disks and other images to a flash drive.

A disk image is a structured set of files that a computer perceives as a real CD or DVD. Let's figure out the easiest way to create and burn an image to disk using Nero. The creation process is very similar to copying, but has its own characteristics. The point is that when normal copying files and folders are distributed in random order, specified by parameters the final folder, and in our case they represent an organized structure that completely repeats the structure of the source folder. This is especially important when transferring programs, games, operating systems that will not function if they are simply copied. Let's get started!

Using the Nero program, you can create and burn a disk image to a CD or flash drive.

How to create a disk image in Nero?

ATTENTION. The developers did not provide separate items for working with USB drives, but provided the ability to write to them.

Place necessary information There are two ways to access such a drive.

How to burn a bootable disc with Windows 7 - instructions

Burning a bootable disk with Windows 7 is not difficult, but some users still personal computer there may be problems with this. In this article we will tell you how to properly burn a bootable disk using popular programs Nero and Small CD-Writer.

Selecting a distribution

There are many on the Internet Windows versions 7. Some of them deserve praise, others are not worth your attention. In order for your computer to work correctly, without glitches and interruptions, we recommend downloading and installing original distributions Windows 7, without any changes.

You can download such a distribution from the official Microsoft website.

Unpacking the distribution kit with the operating system

Download boot distribution Windows 7 operating system on your computer, unzip it if it was in packaged form (files with the extension .zip or .rar). For creating boot disk we need DVD-R/ DVD-RW discs, since the Windows 7 distribution takes up about 4 Gb of data and it simply won’t fit on a CD.

You should not record to high speed, when loading such a disk, the data may not be readable and you will not be able to install the operating system!

Capturing an operating system image using Nero Express

Nero Express is one of the leading recording software optical disks.

We insert a blank DVD-R/DVD-RW into our drive and launch the program.

In the start window you will see several menu items, but we will use the “Image, project, copy” item, and the submenu item “Disk image or saved project”.

Having selected the recording type, the program will ask you to indicate the location of the downloaded image. Once done, click “OK”.

In the next window, the wizard will ask you to select the disk writing speed. For boot disks, you should choose a speed of about 10x-12x, but sometimes it is better to use a lower speed, especially if you have disks from a little-known manufacturer.

By selecting the speed and clicking “Burn”, the program will create a boot disk from the distribution image.

Small CD-Writer

If for some reason you cannot or do not want to use Nero program Express, then we can recommend a simpler and more convenient program.

The interface of Small CD-Writer is very simple.

To record using this program, select the “Disk” item in the program menu and in it “Burn ISO image to disk.” Having done this, click “Record” and wait until the procedure is completed.

Many novice users at some point decide: “I’ll reinstall the operating system myself!” Wanting to free himself from a kind of dependence on specialists, tired of the care of those who know how to do this, a friend or girlfriend, and, finally, challenging his own powerlessness, the user turns to the help of some specialized information resources(fortunately, today there is a lack of all sorts of portals on relevant topics - a dime a dozen) and still finds the answer to the question of how to burn Windows to disk. You won’t believe it, dear reader, but it is a correctly created boot disk with a Windows distribution that is 99.9% of the success of an enterprise called “New OS”! Dedicated to all those for whom the embodiment of the saying “the first pancake is lumpy” is an unacceptable waste of time!

Optical storage media: advantages of conservative choice

You may be familiar with the meaning of the word “blank.” Recently blank disk was the most comfortable for recording technical solution tasks related to the efficiency of transfer and storage of this or that information. Time is rapidly running forward. The former glory of optical media has faded in the rays of Flash technologies. However, let's return to " good habits" Moreover, the solution to the question of how to burn Windows to disk, in addition to nostalgic demand, also has a number of irrefutable advantages:

• The cheapness of CD/DVD discs is unrivaled (Flash drives are much more expensive).
• The issue of durability is often decided in favor of optical media.
• Recording speed and quality are integral advantages when using discs.

The last argument in favor of disks can be considered technical unpretentiousness in terms of using this kind of information storage. A trivial insertion into the drive - and the reading process begins! Whereas the information stored on the flash drive is somewhat dependent on the operating state of the built-in controller. Simplicity and efficiency - this is what should ultimately be reflected in the solution to the question of how to burn Windows to disk.

Reliable burning method: software selection

Create a working operating distribution Windows systems by using standard means OS of the same name is a somewhat problematic task. Therefore, let’s turn to the experience of professionals and secure the practical value of two separately presented software. As a result, you will certainly achieve High Quality and maximum results in terms of readability of the final product - a recorded distribution of the Windows system.

Daemon Tool is a virtual intermediary and effective “translator” of images

As a rule, a downloadable OS boot disk - these are the properties it should have optical media(blank) - has a format with ISO extension. In rare cases, you can find an ending in the file name in the form of an image designation. The mentioned extensions are unique image markers. This copy file is loaded into virtual drive for later use or creating a full boot disk.

How to burn Windows to disk using DAEMON?

After you install this program to your computer, run it.

• Activate the “Burn image” section.
• In the application window that opens, specify the path to the distribution.
• Insert a blank disc into your CD/DVD drive.
• Set speed settings.
• Check the “Finalize” checkbox.
• Click "Start" and enjoy a cup of coffee while watching the recording process.

Method No. 1: How to burn Windows to disk using Nero

Everything is quite simple. Once you have installed and launched the program, launch Nero Express in the left pane of the start window.

• Select the “Image, project, copy” section, go to the “Create a copy of the entire disk” item.
• Specify the source drive as virtual device(image mounted in Daemon Tolls).
• Assign the recorder to the physical device for burning.
• With a disc inserted, specify the write speed (average).
• The question of how to burn Windows to disk essentially requires a high-quality solution. Therefore, it would be useful to activate the “Check data after...” checkbox.
• And finally, make sure that all settings are made correctly, and only then can you safely press the “Copy” or “Write” button (in older versions of the program).

Method number 2: Without virtual intervention

You may not use disk images very often in your work. At the same time, conditionally free program Daemon Tools after 60 days of use it will stop functioning altogether... It makes sense to consider solving the problem of how to burn Windows to disk via Nero, but without necessarily using a virtual drive.

Step #1: Launch Nero Burning Rom

This application, part of the Nero aggregator, is “tailored” specifically for burning disk images. That is, the program independently unpacks the ISO container and, by writing to physical media information, creates a full copy of the boot disk. The user only needs to specify the directory in which the copy of the OS is saved, and also make some settings.

Step #2: Analyze the project size

The Windows XP distribution package can also fit on a CD. However, the image of the seventh version of the Microsoft product provides for the use of a DVD disc only. However, if the copy file is up to 2 GB in size, then you should select the DVD-ROM (UDF) project type - the column on the left. Otherwise, use DVD-ROM (ISO). For each separately enabled recording scenario, using the “New” button is mandatory.

Step #3: Drug-and-Drop and Record

In the right side of the window that opens, find the file stored on hard drive system image file. Clamping left button mouse on the selected object, drag the packaged distribution kit to the left area of ​​the program.

The final action is to activate the “Burn Now” button. After a few minutes, after the recording process is complete, the drive tray will eject on its own. Disk with distribution kit Windows ready to use!

The final part: everything new is well forgotten old!

It is worth noting that, due to the variety of Nero products (differences in versions), navigation and functionality of the programs often become a kind of test for the user. Replacing the outdated six with new release program, the user may encounter some “interface difficulties”, and popular question: “How to burn Windows to disk using Nero 7?” — excellent to that example. However, if the user looked at everything more carefully, clicked and got acquainted with the changes in the “Help” section, then everything would fall into place. After all, everything new requires learning, and knowing the old “habits” of the program, it will not be difficult for you to understand its “bells and whistles” and “tricks”. Good luck with your dating and quality copies!