Win 10 how to log into secure. Launching Safe Mode from Recovery Mode. Using System Restore

You can launch the System Configuration utility using the search built into the taskbar. Just enter your request and click on the top line in search results. In the window that appears, go to the “Download” tab and check the “Minimal” option. Confirm your choice by clicking on the “OK” button. A dialog box will appear asking you if you want to restart your computer right now. After you agree, the Windows 10 operating system will boot into safe mode.

Method 2: Command Line

Experienced users should remember that you can boot the system in safe mode by holding down the F8 key when starting the computer. However, in Windows 10 this feature was disabled to speed up system startup. To fix this “improvement”, you need to enter just one command at the command line.

Click right click Click on “Start” on the taskbar and select “Command Prompt (Administrator)” from the menu that appears.
Enter the following command in the command prompt window: bcdedit /set (default) bootmenupolicy legacy
Press Enter. Close the terminal window and restart your computer. Now, when you press the F8 key during system startup, the boot method selection dialog should appear again.

If in the future you want to return everything as it was, you can do this using the following command:

Bcdedit /set (default) bootmenupolicy standard

Method 3: Special download options

This method does not require any tricks from you and seems to lie on the surface. However, how many can boast that in the wilds Windows settings 10 discovered this on their own useful opportunity? Therefore, I decided to include this download method in the article too.

So, open the Start menu, click on the Settings link, and then follow the address: Update and Security → Recovery → Special boot options. Click the “Reboot Now” button. You will then be taken to the Select Action screen. It offers three options, of which we are interested in the “Diagnostics” item.

On the next screen, click the “Advanced Options” button and then “Boot Options”. At the end of this long way we are waiting for the desired option called “Enable safe mode" By the way, you can significantly shorten this journey if you simply hold Shift button when you click on the “Shutdown” command in the “Start” menu.

If problems arise with Windows computer, one of the first troubleshooting steps is to boot into Windows Safe Mode. Safe Mode is a simple, stripped-down version operating system, loading only the most important files and drivers. In safe mode, you can fix a number of errors with drivers and cure your computer of viruses that prevent the system from starting up stably. If earlier you could enter the familiar Windows 7 using the F8 button when you start the computer, then Windows 10, 8 no longer have this function, but there is a trick that will help you return the F8 button to enter safe mode when you turn on your computer with Windows 10 In this guide, we’ll look at how to enter and launch Safe Mode in Windows 10 from the desktop and return the usual F8 button to always enter through it, and we’ll look at how to disable Safe Mode to avoid cyclic booting.

Note: The easy ways are at the bottom, provided you can boot into your desktop.

How to start Safe Mode when booting Windows 10

If Windows 10 won't boot until home screen and you need to go into or start safe mode when turning on Windows 10 through the “BIOS”, as for example before in Windows 7, with the F8 key, then you will need to get into the Windows 10 recovery environment using other methods, which are described below.

Note: It can be created on another working computer or while yours was still working. If you can boot to your desktop, then launch Command Prompt as an administrator and proceed to.

step 3 Step 1 . When you started with installation flash drive , then get to the point installations and click on the link below "".

System Restore Step 2 . You will be transferred to additional windows settings 10. Next, go through the parametersTroubleshooting > Advanced Settings >.

Command line Step 3

. Enter the following code into the command line (you can copy it in its entirety, you can enter each command via Enter):

bcdedit /set (default) bootmenupolicy legacy

exit . Step 4 You can now start in safe mode using the key F8 in Windows 10 , press the button F8 continuously during system boot until the menu appears with download methods. If you want to go back to how it was, then enter instead of legacy > standard. Will next view bcdedit /set (default) bootmenupolicy standard .

Press the restart button on the computer itself many times in a row to trigger an error and bring up the process diagnostic menu.
Turn on the computer, wait until it boots as much as possible before the error occurs. Next, press and hold the power button on your computer to complete shutdown. Repeat the procedure 3 times, by the 4th time you should see a recovery menu.
If all else fails, then follow Step 1.

How to add Safe Mode to the OS boot selection menu

Windows 10 now has Extra options launch. This will look the same as if you have multiple versions of the OS installed on your computer. If you often use safe mode, then setting up the menu when choosing an OS will be very excellent and convenient. In the picture below I have configured some settings for myself. Let's look at this method.

Note: Before performing this method, read it from the beginning to the end and you will understand the meaning.

step 3. There will be three commands for the three menus created. Maybe you don’t need three, but only need one menu with safe mode. Launch Command Prompt as Administrator and enter following commands to choose from.

bcdedit /copy (current) /d "Safe Mode"- Let's create a safe mode boot.
bcdedit /copy (current) /d "PSU with network"- Let's create a safe mode boot with a network (Internet access).
bcdedit /copy (current) /d "BP CMD"- Let's create a safe mode boot with the command line.

Command line. The system configuration will open, go to the "" tab. We will see the list that was specified via the command line above. Let's customize each menu.

1) . Select "safe mode" from the list at the top and click on the checkmark at the bottom and select " Minimum". Next, check the "" box and click apply. You can also set a menu timer, for example, after 10 seconds it will automatically load just Windows 10. This way the boot menu will appear in safe mode.

2) . Select "PSU with network" from the list and select "Network" from the bottom and check the " Make these boot options permanent". Click apply and this way we can load safe mode with the network, i.e. with the ability to access the Internet.

3) . Highlight "BP CMD", below select " Another shell"and check the box" Make these boot options permanent." Click Apply and OK.

How to enter Safe Mode in Windows 10

System Restore. You'll end up on Wednesday windows recovery 10. In this environment, you can reset settings, restore system and much more. In the recovery environment, click on Troubleshooting.

Click the button Reboot.

Click on your keyboard F4 to begin the procedure of starting Windows 10 in safe mode.

How to enter safe mode in Windows 7

Method 1. Windows 7 starts when you press a button F8. Once you have turned on or restarted your computer, press the F8 button at 1 second intervals. The method will also work with Windows XP. After calling up the menu additional settings, select a download option.

The purpose of safe mode is to boot the system into special regime With minimal use drivers, utilities and settings. It is very often useful when any problems arise with the operation of the computer. This may be the neutralization of any viruses, search spyware, incorrect operation of the device driver or complete system inoperability up to blue screen. In this manual, you can find several options for logging into a secure windows mode 10 and how to disable it in some cases.

IN earlier versions operating systems, it was very easy to boot into safe mode during boot by pressing the F8 key. But for some reason Microsoft decided to remove this feature.

How to enter Windows 10 safe mode using the reboot command

What's new is the way the system switches to Safe Mode boot mode - through the reboot command. In more early Windows there was no such method and the developers very successfully came up with a key combination with the reboot command.

Step 1: First click on the "Start" button, then on shutdown and in the menu before clicking on "Restart" press and hold Shift key. The system will automatically display an option screen and a menu to select the boot method.

While holding down the Shift key, we reboot the system

Step 2: On the first screen, click on “Diagnostics”.

Step 3: On the second screen, select the “Advanced Options” menu item.

Step 4: On the Advanced Options screen, go to Boot Options.

Select download options

Step 5: Confirm reboot to boot the system in a special mode to select the safe mode method.

Step 6: After rebooting, you will see a screen with options. To select one of the types of safe mode, press the F4, F5 or F6 keys. These correspond to menu parameters 4, 5 and 6 respectively. This is what Safe Mode corresponds to in Windows 10.

Enable Safe Mode in the system configuration utility

Exactly the same as in previous versions operating systems (Windows 7 and Windows 8), starting Windows 10 in safe mode is possible through the system configuration service.

Step 1: Press the keyboard shortcut on Windows keyboard+R and enter “msconfig” to launch the configuration utility. After pressing OK or Enter, the system configuration window should open.

Step 2: At the top in the tabs, go to “Download”. This tab allows you to configure the operating system boot parameters. The first thing you need to do is select the operating system for which you need to set safe mode boot parameters. If you have several operating systems, select the one you need. In the boot options, enable “Safe Mode” and select “Minimal” in the options. “Minimal” is startup standard mode Boot, Other Shell allows you to launch the command line, and Network adds network support. In the “Timeout” options, specify the time in seconds that will be set when selecting a boot mode before starting the operating system. If you want the safe mode boot option to be selected permanently, check the “Make these boot options permanent” checkbox.

Click “Ok” and restart your computer. After rebooting before starting, the system will give two startup options. One is a normal Windows 10 boot and the second is loading windows 10 in safe mode.

Using the Command Line

To quickly create a Safe Mode boot mode, you can use a Command Prompt with administrative rights and enter the command to create a new boot mode.

Step 1: Right-click on the Start button and from the list of commands, run “Command Prompt (Administrator”) This type of command prompt has the ability to make changes to the system where administrator rights are required.

Step 2: Enter the command in the command prompt window:

bcdedit /copy (current) /d “Safe Mode”

This command creates in the "Boot" section of the system configuration additional option Windows startup, which will be called “Safe Mode”.

Step 2: Reboot the system and at startup select the second startup option “Safe Mode”. This boot method selection option will always be present before startup.

Step 3: To disable Safe Mode on Windows 10, you need to run the System Configuration Utility. To do this, press the Win+R keys and enter the command “msconfig”.

Step 4: As you can see, the system now has a permanent option to select the download type. To delete, select this entry and click "Delete". After this option, the option to boot into safe mode will be disabled.

It is no secret that failure situations often arise when, in order to restore system functionality or carry out some diagnostic measures, it may be necessary to use the so-called safe mode ( Safe Mode). Let's see how to enable it on Windows 10 on a laptop or computer. It’s worth immediately taking into account that the technique described below is radically different from everything that was in old systems.

How to enable on Windows 10: basic methods

As it turned out, the new “top ten” introduced quite a lot of innovations that, to put it mildly, many users did not like. There was also interference with the operation of the system bootloader in safe mode. The point is that the classic old-fashioned way Pressing the F8 key at startup does not work here. It is unclear why they abandoned it. However, the question of how to enable Safe Mode on Windows 10 has several interesting solutions, compared to older methods.

IN in this case we're talking about about using system configuration settings, keyboard shortcuts and commands, system recovery, and even changing related settings in the updated Control Panel. But first things first.

How to enable safe mode on Windows 10 at boot: MSConfig utility

First, let's look at universal method using the settings called up from the “Run” menu with the msconfig command.

In the settings window that opens, go to the download tab. The download options will be shown below. Here you just need to check the box next to the line indicating safe mode, then save the changes and reboot the system.

You should immediately note that this method is good for solving the problem of how to enable safe mode (on Windows 10) when turning on a computer or laptop. There is some inconvenience here due to the fact that every time you start the system will always boot in safe mode. If it is not needed, you will have to disable it in the same way.

Using specific keyboard shortcuts and commands

Another interesting solution to the problem is how to enable safe mode on Windows 10, which involves rebooting while holding down the Shift key. The only thing worth considering here is that this technique is also suitable if you select safe mode in the login window.

To begin, select the shutdown section from the Start menu, but stop at the reboot line. Hold down the Shift key and click on the reboot command, after which in the new dialog box we go to Troubleshoot and select first Advanced Options, then Boot Settings. And finally, click on the Restart button.

After restarting, a window will appear on the screen indicating 9 options for booting the system, including safe mode.

Enabling Safe Mode from Control Panel

Now let's see how to enable Safe Mode on Windows 10 using the Control Panel.

Here you should go to the settings section and then go to the update and security menu. Here we use the advanced launch options and press the restart button. Further actions are completely similar to the previous option.

Managing Safe Mode from the Command Line

One more in a great way A way to solve the problem of how to enable safe mode (on Windows 10) is to use the command line, called through the “Run” menu by entering the cmd combination. In the window that appears, enter the following combination:

After successful completion of the operation, you need to reboot the system (preferably from here):

Again, it will be installed on permanent basis. Return bootloader to the initial state you can do the same as in version 8:

By the way, if the user has problems loading the system as such, you can use this combination:

It is also relevant for starting safe mode during system recovery.

Starting from recovery mode

In this mode you will need boot disk or flash drive. We boot from removable media, go through the stage of selecting language and regional standards, and in the window with the installation offer at the bottom in the left corner, select recovery.

Now go to the diagnostics section, select additional parameters, and then the command line, in which we enter the command indicated above, the very last one. After reporting the successful completion of the process, we return to the original menu and use the continuation line. After this, the computer or laptop will reboot automatically, and the familiar window with nine boot options will appear on the screen.

How to return to normal startup

But that's not all. When considering how to enable Safe Mode (on Windows 10), you cannot ignore returning to the normal boot mode using the F8 key. This is done simply. In a regular command line you need to write:

A painfully familiar classic window will be displayed on the screen with a corresponding menu of boot options. But this solution is mainly intended exclusively for those users who, due to some circumstances or habits, cannot switch to innovations, although, as practice shows, in general, this is not so difficult to do (if there was a desire).

Bottom line

As you can see, even though the “ten” is different big amount There are many more innovations and options for enabling safe mode. Well, which one to choose depends on each specific case when you need to perform a certain action.

If we approach these issues, so to speak, from a practical point of view, the most likely solution is a one-time launch of such a mode, for example, when restoring with booting from removable media. And it’s true, well, you won’t use it all the time, because it takes more time when the system starts. In general, the use of safe start is recommended only in cases where problems or failures are observed.

Please note that if you select the download option from recovery disk or flash drives re-installation Windows is not required (you can simply skip it). As for the other methods, you can use them or leave them. However, information about available methods there won't be any extra. However, as they say, you can get used to everything.

Safe mode Windows operation 10 is used to eliminate various problems. It starts when the system is unstable, during virus removal, or when installing new drivers. This mode will allow you to find out the reason for the blue screen of death.

How to enter safe mode?

Before the release of Windows 8, entering safe mode was possible by pressing the F8 key on the keyboard during a system reboot. But in new versions there are several options for enabling this mode.

Using the Msconfig utility

Press Win+R to open the Run window:

Run –> msconfig –> System Configuration –> Boot

Important! If you check the “Safe Mode” checkbox, the system will begin to boot constantly only in this state. To set the standard boot, go to “System Configuration” again and uncheck the box, then restart the PC.

Video

For more information on how to exit safe mode on a Windows 10 computer, watch the video.

From the Command Line

Run Command line with System Administrator rights. Run the command: bcdedit /copy (current) safeboot minimal .
Restart your computer. It can be done in a standard way, or from the Command Line using the command: Shutdown –f –r –t 0 . After this, Windows 10 will always boot in Safe Mode.

Healthy! In order for the startup method selection dialog to appear during a reboot, you need to enter the command in the Command Line: bcdedit /set (default) bootmenupolicy legacy. To return to standard download type bcdedit /set (default) bootmenupolicy standard .

While the computer is restarting

Using a boot disk/flash drive

This method is used if Windows 10 does not start on the computer at all. Create a boot disk or flash drive on another device, then follow all the steps that you do when reinstalling the operating system. In the language options window, click Next.

In the next dialog box, run System Restore. After that, follow the path:

Enter the command: bcdedit /set (default) safeboot minimal . Once completed, close the Command Prompt and click Continue. The computer will automatically restart in Safe Mode.

Conclusion

To increase the startup speed of Windows 10, the ability to enter safe mode while restarting the PC is disabled. You can enable the function in several ways, as described above and shown in the video. According to the editors, best option– using the Msconfig utility.