Selectively deleting a windows 7 restore point. Restore points disappear
In the Windows operating system, if necessary, the user can delete system restore points. Windows restore checkpoints allow the user to revert operational state computer at the time a specific restore point was created.
In general, it is not recommended to delete system restore points from your computer. If there is no restore point on your computer, then in the event of serious problems with the system or programs, you will not be able to return your computer to normal, working condition.
Basically, they delete restore points to increase volume disk space. The operating system reserves a certain portion of disk space for system protection functions. You can independently adjust the amount of data that is occupied by the system restore function.
It will only be necessary to take into account that with a minimum volume it will be created a small amount of recovery points. Therefore, with a small number of recovery points, the chances of successfully resolving the problem are reduced, since the problem could have occurred earlier than the first saved recovery point.
In other cases, deleting restore points is necessary for several reasons: the computer has very big number recovery points, or are there unnecessary points recovery, there are also non-working recovery points.
For example, unnecessary restore points are often created when programs are uninstalled. If a user actively installs and uninstalls programs, new system restore points are created and appear in place of the old restore points. It turns out that unnecessary Windows restore points replace those control points that should be saved on your computer.
In Windows, using operating system tools, you can only delete all restore points, or all restore points except the most recent one. However, individual recovery points cannot be deleted.
This issue can be resolved using third party programs. In this article I will talk about how to delete individual system restore points using free CCleaner programs.
Deleting all system restore points
Go to the Start menu and then click right click mouse on the “Computer” item, or right-click on the “Computer” icon on the Desktop. On the left side of the “System” window that opens, click on the “System Protection” item.
Next, the “System Properties” window will open, in the “System Protection” tab. In this tab, opposite the entry “Configure recovery options, manage disk space and delete recovery points,” click on the “Customize” button.
In the next window, “System protection for Local disk (C:)”, opposite the entry “Delete all restore points, including system settings and previous versions files", you will need to click on the "Delete" button.
After this, all restore points will be deleted from your computer.
Deleting restore points except the most recent one
In the Explorer window, right-click on the drive (usually drive “C”). In the “Properties: Local Disk (C:)” window, click on the “Disk Cleanup” button.
In the “Disk Cleanup (C:)” window, click on the “Clean up system files” button.
The operating system will again estimate the amount of space that can be freed on this drive.
In the “Disk Cleanup (C:)” window, in the “System Restore and shadow copying» Click on the “Clear...” button.
In the “Disk Cleanup” window, you will need to agree to delete all system restore points except the most recent one by clicking on the “Delete” button.
All Windows operating system restore points except the most recent one will be deleted from your computer.
In many cases, the user may need to delete only a single, specific restore point. It is impossible to solve this issue using standard operating system tools.
Why is there a need to delete restore points?
Basically, they delete restore points from the computer to save disk space. I am not a supporter of such savings, because I very often use the system restore function myself.
There are other reasons for removing control points. Now, I will tell you about some of them, which served as the motivation for writing this article.
On my daughter's laptop, one of the browsers that my wife used stopped working. I was not informed about this immediately. After contacting me for help, I decided to simply reinstall this browser.
At new installation browser on your computer, the installation process of the program suddenly stopped. When I tried to access the Control Panel from the Start button in Windows 8.1, I found that all the functions that were performed from the Start button were not working on the computer.
It became clear to me that there were serious problems with Windows. In order not to waste a lot of time, I decided to do a system restore because it was the most easy option solutions to this problem.
As a result, I did a system restore, the computer returned to a fully working state, and all problems with the browser disappeared.
During the system restore process, I chose the very first restore point (the most distant in time), since I did not know exactly when the problems with the computer arose. Total, on this computer there were five restore points available. The system restore process from the selected checkpoint failed. Unfortunately, this happens sometimes.
Then I selected another restore point that was created by the system. In this case, Windows recovery was successful.
There are unnecessary recovery points left on the computer: as it turned out, this is a non-working recovery point, as well as several recovery points created by the program Revo Uninstaller, when you remove the browser from your computer.
The fact is that they previously tried to remove the browser from the computer without my help, and in the process of removing the browser, system restore points were created.
It turns out that these restore points were useless, since problems with this browser, and possibly with the system, already existed at that time. Restoring Windows from these checkpoints would not lead to a positive result.
Four of the restore points were broken, so there was no point in me keeping them on the computer. Moreover, new recovery points replace previously created ones, depending on the fullness of the disk space allocated for these purposes.
Therefore, I needed to remove only individual restore points from the computer, leaving workable checkpoints on the computer. This issue can be resolved using third-party programs, in particular.
Deleting individual restore points in CCleaner
By using free program With CCleaner, you can remove individual restore points from your computer, leaving only the necessary checkpoints in the operating system.
After launching the program, in the main CCleaner window, go to the “Tools” section. Here you will need to click on the “System Restore” button. After this, a tab will open in which all system restore points available in this moment, on the computer.
In this list, only the most recent restore point will be inactive. This is done intentionally so that at least one restore point remains on the user's computer. For example, if problems with the operating system occur while working in Windows, the user will always have the opportunity to perform a system restore.
In the warning window that opens, agree to delete the restore point. To do this, click on the “OK” button in this window.
After this, the individual system restore point will be deleted from your computer.
If you need to delete exactly the last restore point, you can first create a new point recovery and then delete the unnecessary checkpoint from using CCleaner.
Conclusions of the article
If necessary, the user can delete unnecessary system restore points from his computer.
Deleting restore points using CCleaner (video)
Greetings to all readers of the Public PC blog. In this article, you will learn in detail how to delete restore points in Windows 7. Using a restore point, you can go back in time and the state of your computer will also return. Before we learn how to delete all system restore points in Windows 7, let's remember why this is needed and what it is all about.
So, using the “Restore Checkpoint” you can rewind time and... However, each such return point clogs up the memory hard drive. You can delete such restore points and thereby free up computer memory.
How to delete restore points in windows 7? Easily!
If you want to know how to delete restore points in Windows 7, then you need to do the following:
Method 1: Deleting restore points (except the last one).
Thus, you have started preparing the system for disk cleanup.
- In the new “Disk Cleanup (C)” window, do the following:
- Advanced Tab –
- “System Restore and Shadow Copies” –
- "Clear."
When the system asks about deleting restore points, click “Delete”.
Here’s another way to delete absolutely all (including the last one) system restore points in Windows 7.
Method 2: Delete all restore points.
- “Start” – “Control Panel”.
- Set View: Small Icons.
- Click on "System".
4) In the window that appears on the left side, select “System Protection”.
5) Tab “System Protection” – “Configure”.
In the window that appears, we check the correctness of our actions. The following should be written: "Removing all restore points, including system settings and previous versions of files".
6) Click “Delete”.
Now you know how to remove . I hope the information was useful to you and you will leave your feedback in the comments, and also subscribe to blog updates at the end of the article. I will be very grateful to you for this. I wish everyone peace and health in your families.
With UV. Evgeny Kryzhanovsky
Unnecessary system restore points, that is, irrelevant backups custom settings Windows uselessly take up space system partition. In addition to this, they can cause characteristic difficulties for novice users when choosing a reserve.
This guide will tell you how to delete restore points regular means OS and through special utilities.
How to leave only the last point
1. Press the “Win” and “E” keys simultaneously.
2. Right-click on the C drive icon.
3. In the context menu, select “Properties”.
4. On the properties panel, click Disk Cleanup.
5. In the new window, click “Clean up system files”.
6. Upon completion of the operation, the “Advanced” tab will appear in the same window. Left click on it.
7. In the “System Restore…” section, click “Clean up…”.
8. In the additional request that appears, confirm the execution of the command: select “Delete”.
Delete all points
1. Press the key combination “Win” + “Pause/Break”.
2. On the left side of the “System” window, click “Protection...”.
3. In the “System Properties” settings panel, on the “Protection...” tab, in the “Options” block, click “Configure...”.
4. To delete all restore points, click “Delete”.
5. In the window that opens with a warning that after cleaning you will no longer be able to use old copies of the settings, click “Continue”.
6. After deleting the points, a message indicating the successful completion of the operation will appear on the display; click “OK” in it.
Selective deletion
To selectively remove unnecessary backups, use one of the utilities described below.
QRM Plus Manager
A tool for managing restore points. It has user-friendly interface, uses a minimum of PC resources. Installs quickly.
1. Download the utility from a trusted resource. Install into the system.
2. Right-click on a space free from shortcuts on the desktop.
3. In the menu that opens, place the cursor on “QRM Plus”. And then in additional panel Click "...Manager".
4. In the manager panel, click the mouse to select the point that you want to remove.
5. Click the Delete button.
Advice! Using the QRM Plus utility, you can also create points (Create) and restore OS settings from them (Restore).
A powerful program for cleaning, repairing and tuning the Windows operating system. Endowed with a user-friendly interface. Has a solid set useful functions for directory and registry prevention.
1. Download free version programs on the manufacturer’s website - piriform.com/ccleaner. Install on PC and launch.
2. In the CCleaner window, go to the “Tools” tab.
3. Click the “System Restore” section.
4. In the adjacent block, click on the point you want to get rid of.
5. Click "Delete".
How to restore from a given point?
1. Press the “Win” + “Break” keys together.
2. Open the “System Protection” section.
3. In the “System Restore” block, click the “Restore…” button.
4. In the list that opens, click on a point. Click Next.
5. In the “Confirmation...” window, click “Done”.
6. Wait for the operation to complete.
Successful Windows cleaning!
Restore points disappear Windows 7, I can’t do anything, after rebooting the computer there is nothing, why do you think this happens? I use a laptop. Victor
Restore points disappear
Happening this problem for so many reasons, let's look at most of them. The information in our article is, to one degree or another, suitable for both operating rooms. Windows systems 7 and Windows XP. Sometimes the user accidentally turns off System Protection for some reason. Local disk, naturally all restore points disappear and are not created again. From the very beginning, check whether System Protection is enabled for that Local disk where points are NOT created or lost. Start->Control Panel->System and Security->System->System Protection. You can also read the article.
Tune
- By default, Windows 7 has System Protection enabled for the drive (C:). It is important that at least 15% of disk space is allocated for recovery points.
- Many times in my practice it happened that the user installed a non-original Windows assembly and it already had System Restore disabled by default for all disks.
- It often happens that two OS, older Windows XP and younger Windows 7, when creating a restore point in Windows 7, you should know that it will exist until the first Windows startup XP. When you later boot into Windows 7, all restore points will be lost, just like previous versions of files. To solve this problem, read our article:.
- Also restore points disappear due to the fault of utilities that clean your computer from various debris. For example, the FreeSpacer program or a cleaning utility CCleaner registry they can easily delete restore points. Such programs must be configured manually. You must make exceptions in settings similar programs folder System Volume Information, responsible for storing recovery points.
- You cannot create a restore point on disks with file systems. These file systems do not support the creation of shadow copies that contain information about changes in system and user files. Windows 7 uses to create restore points shadow copies.
- Look in Computer management->Services, is the service enabled? Windows Backup, as well as service Shadow copy, responsible for creating restore points.
- If you use a laptop or netbook, recovery points will not be created for you when the charger. When enough powerful battery, you can disable this parameter V Task Scheduler. Start->Run->taskschd.msc.
Open the Task Scheduler Library\Microsoft\Windows\SystemRestore branch on the left, then go to the properties of the SR item.
The Triggers tab is responsible for scheduling the creation of recovery points; you can customize it for yourself.
In the Conditions tab, cancel the option Run only on mains power and your laptop will create restore points regardless of whether it is connected to power or not. Uncheck the box there Run a task when the computer is idle and the laptop will create a restore point without waiting 10 minutes by default.
Just in case, make sure there is a checkmark in the Parameters tab Run a task immediately if a scheduled run is missed..
If you decide to clean up free space on your system disk Windows OS, you can delete Windows restore points. You can delete all points except the very last one.
Windows 10
First, we need to open the “This PC” icon and on the disk with Windows 10 installed, we need to click right key mouse and go to “Properties”.
We look for the “Disk Cleanup” button and click it.
Then go to the “Advanced” tab.
And in the “System Restore and Shadow Copies” section, click the “Clean” button.
If you really want to delete OS restore checkpoints, then feel free to click on the “Delete” button.
Again we are warned that the selected files will be deleted, that is, checkpoints except the most recent one. The most recent rollback point will remain. So to speak, just in case of emergency.
The process of cleaning the system disk from recovery checkpoints in Windows 10 will begin.
Windows 8
If your system disk is completely full and you need to free up some space, you can delete old system restore checkpoints. This way you can free up several gigabytes. First, you will need to open the “This PC” icon and right-click on the drive with Windows 8 installed. Usually this is drive C. And select “Properties” from the menu.
In the new window, click the “Disk Cleanup” button.
After a short wait to check the free space, a new window will appear where you need to click the “Clean up system files” button.
Next, you need to click on the “Clean” button in the “System Restore and Shadow Copies” section. All old system restore checkpoints except the most recent one will be deleted. Also, if they exist, shadow copies of files and older ones will be deleted archival images Complete PC.
In the new dialog box, click on the “Delete files” button.
The disk cleaning process will begin, including system restore checkpoints in Windows 8.
Windows 7
I do not advise you to delete recovery checkpoints, as they can be quite useful to you. This need may arise in the absence of free space on drive C. For comfortable work In Windows 7, you must have a system disk of at least 50 GB in size. If you have less than 30 GB, then you may have such a need. You need to go to “Computer” and right-click on the C drive and go to the “Properties” menu.
In the new window, go to the “Advanced” tab and in the “System Restore and Shadow Copies” section, click on the “Clear” button.
A warning message will appear stating that all recovery checkpoints will be deleted except the most recent one. Click on the “Delete” button.
After that, close all the windows and enjoy the result. As you can see, there is only one very last control point left.
Windows XP
In order to delete system restore checkpoints and free up some space on the system drive, you need to go to “My Computer” and right-click on the system drive and select the “Properties” menu item.
