Tricolor Siberia 4500. Owners of receiving equipment models DRS–4500, DRE–4500, DRE–5500, CI7101s, as well as CAM-Siberia-DRE modules, perform a manual search

Record ID: 35 does not exist!

Firmware for DRE-4500 and DRS-4500:

Information for subscribers of Tricolor TV Siberia using DRS-4500 or DRE-4500 receivers.

From April 21 to May 21, 2011, software is being updated from the Bonum-1 satellite

Those who did not have time or for some reason were unable to update the software on their receiver can use this archived file and the instructions included with it to self-updating software.

Do not forget! You perform all operations at your own peril and risk.

Firmware DRE-4500 and DRS-4500
DRS 4500	Save: October 18, 2011
	33.0025.04.19
	2.0.126
Database version	2.0.91
FILE FULL:	DRS4500_2_0_91_BD_2_0_126_PO_full.dre
Database File:	DRS4500_2_0_91_BD.dre
Software File:	DRS4500_2_0_126_PO.dre
DIGI RAUM ELEKTRONICS DRE-4500	Save: May 05, 2011
Hardware version	33.0004.04.13
Software version	2.0.126
Database version	2.0.91
FILE:	DRE4500_2_0_91_BD_2_0_126_PO_full.dre
LOADER:	DRESetup.exe
Files are archived

Instructions for updating the receiver software:

Attention: Do not turn off the receiver's power while transmitting or receiving data! Connecting the RS-232 cable should only be done when the receiver is turned off (the receiver's power cord is disconnected from the 220 V outlet).
You perform all operations at your own peril and risk.

Software update: (from computer to receiver)

Turn off the receiver's power.

Open a file with the *.dre extension in DRE Burner: click "Open File" and specify the file location.
Click the "Upload" button.
Turn on the receiver's power.

Saving software: (from receiver to computer)

Turn off the receiver's power.
Connect the receiver and PC with an RS-232 cable.
Launch the DRE Burner program.

Turn on the receiver.
Press the "Menu" button on the receiver's remote control.
Select the "Settings" menu item.
Enter your PIN code. Default is "0000".
Select the "Data transfer" menu item.
Click "Download" in DRE Burner.
Enter the name of the file under which you will save the software.
Click "Save".
Press the FAV button on the receiver remote control (blue button)

Dear subscribers!

By technical reasons There may be interruptions in signal reception for subscribers after maintenance work on January 21, 2015 from 02:00 to 10:00, which manifest themselves in the coding of Tricolor TV TV/radio channels.

If problems occur, you must reboot the receiving equipment.

If necessary, send reactivation commands.

We apologize for any inconvenience.

Your "Tricolor TV"

And if you have receiver models DRS–4500, DRE–4500, DRE–5500, then click HERE.

If you have other Tricolor models, click HERE.

1. Owners receiving equipment models DRS–4500, DRE–4500, DRE–5500, CI7101s, as well as modules CAM-Siberia-DRE perform a reset to factory settings.

To do this, press “Menu” on the receiver’s remote control, select “Settings”, press the “OK” button, then “Manual search”, confirm the selection by pressing the “OK” button and specify the following parameters in the window that appears:
Satellite name: Doesn't matter
Frequency: 12355
Polarization: Left
Flow rate: 21500
FEC: 1/2
Important! The “Network search” item should be set to “YES” (“Menu” - “Settings” - “Manual search” - “Advanced” - “Network search” - “YES”).
Then you need to select “Start Search” in the “Manual Search” menu and click the “OK” button. Attention! For equipment not manufactured by General Satellite, the settings path may be different. If, after re-searching for channels, the program list is not displayed correctly, then you need to clear the program list through “Menu” - “Settings” - “Channel Organization” and repeat the re-search again. We apologize for the inconvenience caused.

2. Owners of receiving equipment models GS–8300, GS–8300N, DRS-8300, GS–8300M, GS 8302, GS 8304, GS 8305, GS 8306, HD-9300, HD 9303, GS-8307,GS-8308, DRS -8308 reset to factory settings. Re-search for TV channels "Tricolor TV".
To do this, press “Menu” on the receiver’s remote control, select “Search for Tricolor TV channels” “OK” and update the list of TV channels, following the prompts on the TV screen.

On the night of February 3-4, 2014, from 2:00 to 10:00 (Moscow time), maintenance work will take place, during which the composition of the “Maximum HD” and “Optimum” packages in the DirecTV-1R satellite broadcast area will change. In order to increase the stability of the signal from the DirecTV-1R satellite in anticipation of winter games on the night of February 3-4, 2014 from 02:00 to 10:00 (Moscow time) work will be carried out, after which the broadcasting of TV channels will be suspended:
“Mother and Child”, “Nano TV”, “Much TV”, “India TV”, “RTG TV”, “Tonus TV”, “Zoo TV”, “Comedy TV”, “365 days”, “NSTV”, "OTV Chelyabinsk". Broadcasting of these TV channels will be resumed after the launch of a new satellite, planned according to information from the Federal State Unitary Enterprise " Space communications" on March 4, 2014, its arrival at the stationary point and testing the performance of the on-board equipment. Upon completion of the preventive work, in order to resume viewing other TV channels “Tricolor TV-Siberia” from 10:00 (Moscow time) 02/04/2013 you must:

Setup and repair of the Tricolor TV receiver in Bratsk, Padun, Energetika: Gidrostroiteley 57 t 270353.

STEP-BY-STEP INSTRUCTIONS for setting up the DRS-4500 and 5500 receiver.

1. Connect the receiver to the configured antenna and turn it on.
2. Press the "MENU" button.
3. Down arrow on “Settings”, click “OK”.
4. The "Enter PIN CODE" prompt appears.
5. Enter “0000” (press 0 four times) and go to settings.
6. Use the down arrows to go down to “Organization of channels”.
7. Go to “Channel Organization”, click OK, OK to enter the channel editor.
8. Press the "LAST" button to select ALL channels. Those who have not found the LAST button pedantically press the red button and delete channels one by one
9. Press the RED BUTTON to reset the channel list. We check that all channels have been deleted. Exit "EXIT", "EXIT"
10. In the “Settings” section, go up with the arrows and go to “Manual Search”.
11. Check the parameter values line by line.
12. The first line "Antenna" is equal to "1". We check and don’t touch.
13. Second line “Satellite” - select the Bonum1/DirecTV1R satellite, there are other satellites there, you need to open the list and find the one you need.
14. Third line “Frequency” - select the frequency 12355 or enter the number in digits, although usually this frequency already exists and is in the list.
15. The fifth line “Polarization” is equal to “Left”. We check and do not change.
16. Sixth line “Flow speed” - should be 21500. We make sure that it is, if it’s a different number, you can dial it with numbers.
17. The seventh line "FEC" is equal to "2/3" or "3/4". You need to expand the list and select "1/2"
18. After changing the FEC value by 1/2, a signal percentage should appear below, the signal should be more than 70%, preferably 80%, than more topics better
19. Go to “Search for channels” and search for channels.
20. Save the found channels. Let's check what it shows.
Official:

New satellite "DirecTV-1R" in Siberia.

Attention! Due to the cessation of broadcasting of TV channels from the Bonum1 satellite and the start of broadcasting from the DirecTV-1R satellite, the software update period is extended until 15.03.2013 . detailed information about the update for each model of receiving equipment is published on our website, as well as on the TV channel “Infochannel “Tricolor TV”.

Software update from satellite for model receivers DRS-4500, DRE-4500, DRE-5500, G.S.-8300 (M, N), G.S.8305, G.S.8306, HD9303 will be to 03/15/2013.

ATTENTION! Before you start updating the software for your receiversDRS-4500, DRE-4500, DRE-5500, G.S.-8300 (M, N), HD9303 must be executed manual search TV channels on your receiver.

Press the "Menu" button on the remote control remote control receiver, then select “Setup” and press the “OK” button. After that, select “Manual search”, click “OK” and enter required parameters in the corresponding lines on the TV screen:

Companion name: Bonum 1
Frequency: 12355
Polarization: Left
Modulation: QPSKDVB-S
Flow rate: 21500
FEC: ¾

Now you need to select the “Advanced” item and click the “OK” button. In the menu that opens on the TV screen, set the value to “YES” in the “Network Search” item, then press the “Exit” button to return to the “Manual Search” menu, select the “Start Search” item and press the “OK” button.

You can find instructions for further updating the software from the satellite.

Important! If the equipment software is not updated before the end of the specified period , since March 16, 2013 watching TV channels "Tricolor TV-Siberia" on this equipment will be impossible.

If you own receivers modelsG.S.8302, G.S.8304 , or you cannot update the software from the satellite within the specified period, you need to update the software yourself by downloading files from the website, or contact an authorized Tricolor TV dealer or service center.

You can download files with updated software for your receiver model here:

Equipment model	Receiver software version/module software version
	1.2.196 / 0.8.32
	0.21.131 /02.00.11

	0.31.131 /02.01.00
DRE-5500 -

How to set up the DRE-4500, DRS-4500, GS 7300 and DRE-5500 receiver. "Tricolor TV-Siberia" after April 22, 2014.

If Tricolor TV Siberia does not work for you or says there is no signal, then you need to update and configure your DRE-4500, DRS-4500 or DRE-5500 receiver.

This setting must be done in connection with the start of broadcasting of the Tricolor Siberia project from the new Express-AT1 satellite, which replaced Bonum and Direct.

First we need to write down old version firmware of your receiver.

To do this, in the main menu, go to the bottom icon called status.

After the firmware, the software version should become 2,2,215.

This firmware will be downloaded directly from the satellite.

Let's begin the process of updating the software of your Tricolor TA Siberia receiver.

1. Disconnect the receiver from the power outlet and plug it back in.

2. We need to turn on the TricolorTV news channel. This channel should be in the top ten channels.

After switching to Info. The channel should display a splash screen offering a software update from the satellite.

3.After pressing the OK button, the software update process will begin.

At the top there will be an inscription Updated from satellite. The update process should take approximately 5 minutes and during this time the receiver should not be disconnected from the network.

If you do this, you will have to take the receiver to a service center for repair or manual firmware.

4. When the software update process is completed, press the OK key on the remote control and after that the receiver will reboot.

5. After turning on the receiver, you will need to do the initial setup of the receiver and search for Tricolor Siberia channels.

6. Upon completion initial setup again go to the status menu and look there new version Your receiver's firmware is 2,2,215.

7. If the version is different from 2,2,215, then you need to return to point 1 of this article and do the update process again.

Here is a video instruction on how to set up the Tricolor Siberia receiver.

How to set up the DRE-4500, DRS-4500, GS 7300 and DRE-5500 receiver. "Tricolor TV-Siberia" after April 22, 2014.

If Tricolor TV Siberia does not work for you or says there is no signal, then you need to update and configure your DRE-4500, DRS-4500 or DRE-5500 receiver.

This setting must be done in connection with the start of broadcasting of the Tricolor Siberia project from the new Express-AT1 satellite, which replaced Bonum and Direct.

First we need to record the old firmware version of your receiver.