Open the router web interface. TP-Link router settings: how to log into your personal account and more

Wireless Networks - Opportunity convenient connection to the Internet without additional cable installation. A router (or router) is a compact substation, the main task of which is to transmit the signal received from the network to connected devices.

Unfortunately, even modern technologies malfunctions. But even when your device is working properly, you may need to, for example, change the password or wireless network name. In all of the above cases, you will need to go to the router settings and make certain actions. The TP link router control panel is located at 192.168.1.1 or 192.168.0.1.

TP link settings: using a personal computer

Using network cable, establish a connection to the computer router. To do this, connect one end of the cord to personal device, and the other to the router. To connect to the router, use any of the LAN connectors (yellow outputs).
Specify the address specifically for your router. To do this, turn the device over and back side On the left, find the IP line and look at the subsequent combination of numbers. In some device models, instead of the usual numbers, the domain address tplinklogin.net or tplinkwifi.net is written. Then remember this address.
Open any browser on your PC and enter the IP address (or domain) data in the search bar.
Press Enter.
A window will appear in which you must enter your username and password. Again, look at this information on your router. It is listed below the IP address (or domain). Standard data "admin" and "admin". If you have previously changed the login information for the router settings, then enter the already changed information.
Press Enter (or “Login”) again.
The required settings will appear in front of you.

TP link settings: use wireless Wi-Fi network

This method will help if you need to get into the control panel of the router, but there is neither a power cord nor a computer. Important Note When working with device settings via Wi-Fi, do not update software, otherwise you risk breaking the device. The router firmware is carried out only using a cable connection.

On the back of the router you will find the connection information IP address, login and password.
Next, launch the browser on any gadget (phone, tablet, laptop) associated with Wi-Fi router connection.
Enter IP addresses (or domain address) into the search bar.
You are making the transition.
In the window that appears, fill in the “Login” and “Password” fields. To do this, enter the appropriate data for your router (standard “admin” and “admin”).
Click “Login”.
If everything was done correctly, a page of the required settings will open in front of you.

TP link settings: possible problems

In some cases, performing the steps listed above does not bring the desired result. What are possible reasons failures?

It is not possible to open the page

After specifying the IP address and attempting to navigate, a message appears on the screen that the browser cannot display the page. In this case it is necessary:

Check the Internet connection. In the status bar on your computer (or mobile device) the Internet connection icon should be lit.
Check the network settings on the PC or other gadget with which you are trying to access the router settings.
When installing wired connection check the integrity of the cable. If possible, try connecting via Wi-Fi.
If your computer has active and Wi-Fi connection and connection by power cord, disable one of the communication methods.
It should not be ruled out possible breakdown the router itself.
If the above steps do not give the desired result, try resetting the router to factory settings (press and hold the Reset button on the back of the router for about 10 seconds).

Incorrect login and password

An error may also occur at the stage of entering your login and password (or entering this information does not lead to any further events). In this case:

Sort through different variants to enter. If you have changed your data, enter it already new information, not standard data. Leave both fields blank and try to login. Leave the “Password” line blank or try entering the combination 1234 in it.
Change your browser.
If the steps are unsuccessful, you will most likely have to perform a factory reset (as described above).

A basic article necessary for composing more complex articles.

To access the settings of the TP Link router, you need to enter the network address of your router in the address bar of your browser.

There are several ways to find out the address of a TP Link router:

Article updated date: 12/07/2016

Standard router login

The standard input is used when initial setup router or if no manual change was made network address devices.

To know standard address You can login to the TP Link router either from the instructions or by turning the router over.

On the bottom side of the router there will be a sticker indicating the login address, login and password.

For example on Image 1, for the Tp Link WR720N router - you can access the settings by entering in the address bar: tplinklogin.net, this address will be available even without an Internet connection.

Image 1. Sticker on the bottom side of the TP Link router, with the login address, login and password

Enter the address tplinklogin.net in the browser and click Enter key and a window appears asking for access to the router.

ATTENTION:

If the sticker is unreadable, this moment There are two known http addresses used to log into TP-Link routers:

tplinklogin.net
tplinkwifi.net(For TP-Link models AC1200, Archer C50)

Image 2. Login window to the TP Link router, enter your username and password

Enter your username and password and press the button OK. Login to the router is successful.

Logging into the router with a changed IP address

If the router's address was changed during the setup process, you can find out the address as follows.

Click on the icon network connection in the tray (the area in the lower right corner of the desktop) right key mouse, in the menu that opens, click on Network Control Center and shared access .

Image 3. Open the Network and Sharing Center

On the left side of the window, click on the item Change adapter settings, to access your existing network connections.

Image 4. Open the list of network connections

Select a wired network connection, in my case Ethernet0, right-click on it and select the item State.

Image 5. Open the properties of the network connection

In the network connection status window, click on the button Intelligence.

Image 6. TP Link router address in network connection properties

In the window Intelligence, in line Default Gateway and the address of the TP Link router will be indicated.

Enter the address 192.168.0.1 in the address bar of the browser and go to the router access page. By default, the login and password for TP Link routers is the combination admin admin

Image 7. Login window for the TP Link router, enter your login and access password

By clicking the OK button, the router settings management page opens.

From the author:

If this article helped you and you would like to say “Thank you” - read

Actually, go to settings TP-Link router quite simple, since a good interface creates convenience for the average user who has never dealt with such things. And the login and configuration algorithm is very similar to other routers.

A large number of people prefer this brand. It’s clear why, because, firstly, almost all the company’s models have the same type of settings. Secondly, as already mentioned, a simple interface, which makes setting it up yourself easy, and after reading the article - in general there will be no questions left.

How to enter the manufacturer's TP-Link router settings

Connect the power adapter to a socket with a voltage of 220 V. We insert the other end of the wire into the appropriate power connector (usually it is located next to the power button). Turn on the router.
Connect the device to the computer (the network cable included in the package will help with this). If you previously used a modem, you first need to disconnect the cable from the computer, insert it into the blue WAN connector and turn it on again. Then connect the cable (patch cord) included to the computer, and the other end to any yellow LAN connector. If, when connecting a PC to the network, you are asked for an SSID and password, you can look at it on the sticker at the bottom of the router.
Next we enter the network and sharing control center. In the sidebar on the left ( left menu) go to the item “Change adapter settings”. Next, right-click on our connection and select properties. Go to the item “Internet Protocol...”. In the window that opens, change the initial values to “Get I.P. address automatically” and “Get DNS servers automatically". After this, with the help of DHCP, the router will distribute IP addresses. Next you need to go to “Protocol Properties”. If any DNS servers are written there, then write them down on a piece of paper so as not to lose them.
Go to the browser (recommended Google Chrome,Opera, Yandex Browser or Safari. Internet Explorer does not always support the page TP-LINK settings) to the device’s website at the address indicated on the bottom of the device itself. For TP-Link, these are IP addresses 192.168.0.1 and 192.168.1.1, or the tplinkwifi host address. net, which is universal for any models of this manufacturer. Must be entered in address bar one of the proposed options. By the way, it is most convenient to do this from a computer or laptop. Also, you cannot log in from two gadgets at the same time.
Log in. Next, you need to log in to the site. The default username and password are admin admin. If this combination does not work, then, as in the case of the IP address, you need to look at the bottom of the device. It is recommended to change your password later to avoid trouble.

Great, you're in in the router settings panel TP-LINK and ended up in your personal account. The interface looks like a black and green page with a side bar on the left, which contains everything you need to configure. In order to launch quick setup, you need to click on the second menu item from the top and fill in the required fields.

By the way, about changing the password

This is a rather important procedure, because anyone who connects to the network can enter the router setup menu. So if your network is not password protected, then your neighbor can change all factory settings and put your username/password. In this case, only a reset will help. Therefore, to prevent this from happening, you should change standard password straightaway. It's easy to do:

Go to the tab System Tools, further in Password.

Old User Name- in this field we write admin or previous login.

Old Password- enter admin or previous password.

New User Name- We come up with any desired login.

New Password- write any desired password, we recommend a reliable one that is difficult to guess.

Confirm New Password- type the same as in the previous field, thereby confirming the password and your desire to change it.

A little more about the menu

This article discusses the menu using the TL-WR841N model as an example, but in general the TP-LINK router interface is the same for all models.

Status - shows the current state of the network as a whole. Quick Setup - launch quick setup. Network - network. Wireless - wireless network. Forwarding - redirection. Security - security. Parental Control - parental control. Access Control - access control. Static Routing - advanced routing settings. Bandwidth Control - control bandwidth. IP & MAC Binding - I.P.- and MAC addresses. Dynamic DNS - DNS dynamic. System Tools - as you might guess, tools.

If the settings according to the instructions do not help, and the router still does not want to work, then you can reset the settings to factory settings and try again from the very beginning. If it is suddenly really needed, then we perform the following algorithm:

Behind, next to WAN ports and LAN, yes Reset button. You need to hold it for half a minute. After this, the basic settings will be set.
When you log into the router’s website, we launch the quick setup and do everything again according to the instructions indicated above.