Setting up a tp link router personal account. A non-standard port is used to enter the router settings. Setting up TP-LINK TL-WR841N

The purpose of the work of any self-respecting large company- meeting customer needs. And the more convenient the product is for them, the large quantity there will be consumers in the end. That is why, in order to make life easier for our clients and simplify the process for them to enter the settings of their wireless routers and modems, TP-Link is introducing on its devices the ability to access the web configurator using a hostname. It all started with . AND for a long time This is the address that was used. But over time, the picture changed. On newer devices you can find another option - address tplinkwifi.net to configure the router.

Later, several more options appeared. Now the overall picture looks like this:

Tplinkwifi.net - modern Wi-Fi TP-Link routers
- tplinklogin.net - old versions and firmware of routers and modems
- tplinkap.net - TP-Link access points
- tplinkextender.net - repeaters and signal amplifiers
- tplinkmodem.net - ADSL modems and TP-Link routers

The point of using hostnames is so that the user does not guess what IP address his WiFi router has - 192.168.1.1, 192.168.0.1 or some other, but simply enters address bar browser router website address - tplinkwifi.net, tplinkmodem.net, or tplinkap.net. This is especially true in cases where the device’s IP changes when updating the firmware, thereby confusing the average user. A striking example is the tl-wr720n, tl-wr740n or tl-wr841n models. To the point that the owner has to take the modem or router to a service center.

To find out which hostname is used on your TP-Link router, just turn it over reverse side and look what is written on the sticker:

I would like to note that on modern tp-link routers, even if you enter the wrong hostname as written (for example, tplinklogin.net instead of tplinkquifi.net), the device will automatically redirect you to the correct address.

How to log into tplinkwifi.net to configure the router

In order to log into the router settings system through the hostname, you just need to launch any Chrome web browser, Internet Explorer, Edge or Opera. In the address bar, where you usually enter the address of the desired Internet resource, enter the address of the router’s website: tplinkwifi.net, tplinkmodem.net or tplinkap.net. and press the Enter button.

If suddenly logging in via tplinkwifi.net or tplinkmodem.net is unavailable and the login request with password does not appear, and the error “This page could not be displayed” appears, then most likely there is a problem with the settings network card or operating system. In this case, it will be easier and faster to log in the old fashioned way - through IP. But here the question arises - how to find out the IP address of a TP-Link router. Very simple! Opening network Windows connections 10 and right-click on network connection, through which the modem or router is turned on:

In the menu you need to select the “Status” item. After this, the following window will open:

Click on the "Details" button to access information about the network connection.

In the window that appears, we carefully look at what IP address your computer will receive and what is written in the “Default Gateway” line - this is the router’s IP. Typically 192.168.0.1 or 192.168.1.1 is used. Then simply write it in the address bar of the browser instead of tplinkwifi.net and press Enter key. Like this:

After that Personal Area settings TP-Link router should open without problems.

How to set up a router? How to get ? How to log into your Personal Account to configure D-Link, TP-Link or Tenda routers. Read about this and much more below. Especially for you - detailed step-by-step instruction with video and screenshots. Let's take a look at all the features of authorization on 192.168.0.1 and the admin admin login.

You bought or borrowed a modem or router from someone and are going to set it up yourself. Perhaps you have already purchased a new device or the settings in your old one have been lost and you need to restore all the settings again. Do you want to install and set parameters Wi-Fi connections(Name, Network Name, Password) and Internet.

Do you want to set up Internet distribution in your house or apartment via Wi-Fi to your other devices - phone, smartphone, tablet, TV, laptop or computer. To do this, you will need to use login: admin and password: admin (admin panel of the router or Personal Account).

Before doing this, carefully study the user manual, instructions and the case of the device itself. Typically, manufacturers indicate all the data necessary for entry and configuration on a sticker. Look for this sticker on the bottom of your Tplink, Dlink or Tenda router or modem.

To make it easier to understand, I suggest watching the video: 192.168.0.1 - Personal Account.

Personal account of modems and Wi-Fi routers Tplink, Dlink and Tenda are used to configure parameters wireless connection and Internet connections. It is located at a special IP address for easy access to the router settings. In our case it is http://192.168.0.1, but for some models 192.168.1.1 is often used.

Due to the design features of routers, access points, routers, modems and other network gadgets, logging in to 192.168.0.1 is the most convenient and practical way to log in to your personal account. Although 192.168.0.1 looks like a website address on the Internet, it is actually not. This path is local and coincides with your own network address the Wi-Fi router itself or other customizable network device.

How convenient is access to Personal D-Link office, TP-Link and Tenda - settings via http://192.168.0.1 by admin admin?

No installation of additional software is required, it is already pre-installed.
The router firmware is protected by the manufacturer; users cannot make changes and disrupt its operation.
Access to the Personal Account and admin panel does not depend on the type and version of the operating system (Windows 7, 8, 10, Linux, etc.). You can log into the router via 192.168.0.1 via admin admin from any mobile device, phone, smartphone, tablet (iOS, Android) or laptop.
It is convenient to connect over the network and administer access rights to 192.168.0.1 (allow some to log in and deny authorization to others).

192.168.0.1 admin admin - login for D-Link, Tenda and TP-Link.

What actions become available after authorization (login:admin password:admin) on 192.168.0.1? After logging into the admin panel you will be able to:

Manage Internet connection settings.
Set and change Wi-Fi password.
Change the password to access the settings of the router or modem.
Set and change the name Wi-Fi networks in the house.
Forward ports.
Connect and configure a 3G, 4G LTE mobile USB modem with a SIM card from Megafon, Beeline or MTS.
Manage a DHCP server and configure the distribution of IP addresses to other devices on the network (phones, smartphones, tablets, laptops, set-top boxes, TVs, etc.)
Tune digital television(iptv).
And much more.

Step-by-step instructions with screenshots:

It was not possible to log into the router via 192.168.0.1 or admin admin is not suitable.

If you have problems accessing 192.168.0.1, the following errors may appear in your browser:

How to solve problems with access to http://192.168.1.1 and authorization using admin admin:

192.168.0.1 - additional information.

If you have not found the answer to your question, I suggest you study in detail useful information and additional links

The router control panel is needed so that you can set up an Internet connection, change the name and password of the access point, check the functionality of the Internet, etc. Most routers are programmed with a single address 192.168.1.1 or 192.168.0.1. But it’s not always possible to simply enter this address in the browser and gain access to the router’s personal account. Sometimes problems arise that prevent this.

What to do to log into the control panel via http://192.168.1.1

Most important aspect- your router must support an active Wi-Fi access point. The device should do this even if it does not connect to the Internet. If this does not happen, try disconnecting the router from the power supply and wait 20-30 seconds. and connect it to the network again.

Also sometimes a full reset of settings helps - the router has a special button, which is often labeled "reboot" or "reset". Sometimes, instead of a convex button, there is a narrow hole where you need to insert a needle or match and hold the button for 30 seconds. before full reset settings. In this case, the connection name (192.168.1.1) and password are returned to the factory values (admin admin) - they must be indicated on the router case.

After the point Wi-Fi access will be detected by your computer, connect and go to the browser. In the address bar, enter . If nothing happens, try 192.168.0.1. On the page that opens, you need to specify the administrator login and password.

Please note that the authorization data of your access point is not relevant to the admin panel. If you did not change it yourself, then you can log into your personal account using the login and password “admin”. Sometimes the manufacturer sets others standard settings- look for information on the router box or in its documentation.

The router works, but does not log into your personal account 192.168.1.1

If you encounter this situation, make sure you use required address control panels. On most routers this is http://192.168.1.1, but on some models (D-Link, Tenda, etc.) 192.168.0.1 is used. Try connecting your router using the built-in slot for power cord. In this case, the computer must independently connect to the Internet, which is configured on the router.

If this does not help, check your IP and DNS settings in the Network Sharing Center and shared access(on Windows 7 and 10). To do this, right-click on the Internet connection icon, click LMB ( left button mouse) in the section with the corresponding name. The control panel will open, right-click ( right button mouse) by the name of the connection opposite “access type” and in the context menu that opens, select “properties > IPv4”.

Here you need to check the boxes next to the items that cause automatic detection DNS and IP addresses. Static data only needs to be specified if it is predefined by your Internet provider.

In this case, you need to indicate the identifiers and subscriber registration data that were issued to you during the execution of the contract. If they were not given to you or you lost them necessary information, call technical support provider and find out IP/DNS.

In fact, going into the settings of a TP-Link router is quite simple, since a good interface creates convenience for the average user who has never dealt with such things. And the login and configuration algorithm is very similar to other routers.

A large number of people prefer this brand. It’s clear why, because, firstly, almost all the company’s models have the same type of settings. Secondly, as already mentioned, a simple interface, which makes setting it up yourself easy, and after reading the article - in general there will be no questions left.

How to enter the manufacturer's TP-Link router settings

Connect the power adapter to a socket with a voltage of 220 V. We insert the other end of the wire into the appropriate power connector (usually it is located next to the power button). Turn on the router.
Connect the device to the computer (this will help network cable, which is included in the package). If you previously used a modem, you first need to disconnect the cable from the computer, insert it into the blue WAN connector and turn it on again. Then connect the cable (patch cord) included to the computer, and the other end to any yellow LAN connector. If, when connecting a PC to the network, you are asked for an SSID and password, you can look at it on the sticker at the bottom of the router.
Next we enter the network and sharing control center. In the sidebar on the left ( left menu) go to the item “Change adapter settings”. Next, right-click on our connection and select properties. Go to the item “Internet Protocol...”. In the window that opens, change the initial values to “Obtain I.P. address automatically” and “Obtain automatically”. After this, with the help of DHCP, the router will distribute IP addresses. Next you need to go to “Protocol Properties”. If any DNS servers are written there, then write them down on a piece of paper so as not to lose them.
Go to the browser (recommended Google Chrome,Opera, Yandex Browser or Safari. Internet Explorer does not always support the page TP-LINK settings) to the device’s website at the address indicated on the bottom of the device itself. For TP-Link, these are IP addresses 192.168.0.1 and 192.168.1.1, or the tplinkwifi host address. net, which is universal for any models of this manufacturer. You must enter one of the proposed options in the address bar. By the way, it is most convenient to do this from a computer or laptop. Also, you cannot log in from two gadgets at the same time.
Log in. Next, you need to log in to the site. The default username and password are admin admin. If this combination does not work, then, as in the case of the IP address, you need to look at the bottom of the device. It is recommended to change your password later to avoid trouble.

Great, you're in in the router settings panel TP-LINK and ended up in your personal account. The interface looks like a black and green page with a side bar on the left, which contains everything you need to configure. In order to launch quick setup, you need to click on the second menu item from the top and fill in the required fields.

By the way, about changing the password

This is a rather important procedure, because anyone who connects to the network can enter the router setup menu. So if your network is not password protected, then your neighbor can change all factory settings and put your username/password. In this case, only a reset will help. Therefore, to prevent this from happening, you should change standard password straightaway. It's easy to do:

Go to the tab System Tools, further in Password.

Old User Name- in this field we write admin or previous login.

Old Password- enter admin or previous password.

New User Name- We come up with any desired login.

New Password- write any desired password, we recommend a reliable one that is difficult to guess.

Confirm New Password- type the same as in the previous field, thereby confirming the password and your desire to change it.

A little more about the menu

In this article, the menu is discussed using the TL-WR841N model as an example, but in general the interface TP-LINK router All models are the same.

Status - shows the current state of the network as a whole. Quick Setup - launch quick setup. Network - network. Wireless - wireless network. Forwarding - redirection. Security - security. Parental Control - parental control. Access Control - access control. Static Routing - advanced routing settings. Bandwidth Control - control bandwidth. IP & MAC Binding - I.P.- and MAC addresses. Dynamic DNS - DNS dynamic. System Tools - as you might guess, tools.

If the settings according to the instructions do not help, and the router still does not want to work, then you can reset the settings to factory settings and try again from the very beginning. If it is suddenly really needed, then we perform the following algorithm:

Behind, next to WAN ports and LAN, yes Reset button. You need to hold it for half a minute. After this, the basic settings will be set.
When you log into the router’s website, we launch the quick setup and do everything again according to the instructions indicated above.