How to set up a parallel call on Beeline. How to disconnect the second Beeline telephone line

Often, during a conversation with one person, another tries to call you. Is it possible to accept a call without interrupting the conversation? For all its clients, the company provides the “Call Waiting” service, which allows you not to miss a call during a conversation and choose, at the same time, which of the people who called you should talk to first.

While talking to someone, you can accept a new incoming call: using the phone keys, you can easily switch between calls. This is extremely convenient feature– You don't have to worry about missing an important call while talking to another party.

The service was connected initially, being one of the main ones in starter pack operator. This service is also valid when roaming, both national and international. At the same time, it is available to absolutely all Beeline users, regardless of the current package and form of service.

How to activate “Call Waiting” on Beeline

It happens that the service “does not want” to work on your mobile, then try to make it reconnection there may have been some problems. There are several ways to activate the service - they are presented below.

You can send a request *43#, “Call” key.
By calling service number 067 409 041, you can use voice prompts and connect to the option.
You can use another request option for quick connection: *110*041#, “Call” key.
The presence of the Internet and Beeline personal account greatly facilitates the resolution of all emerging issues regarding communication, including the connection to the “Call Waiting” function. After logging into the system and finding the one you need in the list of services, connect it.
You always have the opportunity to request help from the Beeline operator. You will not only be advised, but also the necessary option will be activated.
If you have time, you can visit service center companies where employees will provide advice and make the connection. You just need to take your identification document with you.

You don’t have to wait long for activation - literally immediately after receiving the application, the service becomes available.

How to disable “Call Waiting” on Beeline

It's easy to disable the service:

You can use your Beeline personal account, however, you can deactivate any service through this service.
The second method is to call the Beeline operator number, you will need to leave a request to disconnect.

If you have an IMPORTANT or very URGENT question, ask!!!

You will not have to pay extra to use the Call Waiting service. In practice, this service is very easy and simple to use.

While talking to one person, you will hear a beep, notifying you that another call is coming. In this case, you can interrupt the current conversation and answer the new caller, or simply use the telephone keys to switch to a conversation with the new caller. For any questions you may have, you can contact the technical support operator, including questions regarding this function.

IMPORTANT: The information on the site is provided for informational purposes only and is current at the time of writing. For more accurate information For any questions, please contact official operators.

By default, the operator assigns a list of initial services to each SIM card for the convenience of the subscriber. Some of them are paid. To avoid being charged a commission, disable the call hold option on MegaFon. We will tell you how to do this below.

Description and price of the service

“Call Hold” is the ability to simultaneously talk to another subscriber and switch to the second incoming call without dropping the first connection. Can be used for conference calls with big amount subscribers.

Important! The solution can only be used in conjunction with “Call Waiting” (instead of intermittent beeps indicating that the called number is busy, the caller hears a voice notification that they can wait for a connection).

There is no connection fee for the service, and there are no monthly fees. Each call hold operation on the phone is charged; when using a conference call, the fee is charged for each connected call. The cost of the function is 1 ruble, debited from the client’s balance.

Attention! For those consumers who are connected to the “All Inclusive” lines, package versions of the “Warm Welcome”, “Turn On!”, MegaFon Unlimited and “Cities Connection” tariff plans - use of the service is provided free of charge.

Function control

To manage option settings, use your personal account in the “Services” section or enter the configuration menu using USSD request*520# and call button.

Management of the service directly during a conversation is determined by the user’s device itself. As a rule, during the current call they begin to receive sound signals, that someone is trying to call and using the answer button you can hold the current connection and switch to a new one, then return back.

Attention! For full use resource on the phone should not prohibit the use of such operations.

How to enable and disable the option

Initially, there is no need to activate the service, since everything is preinstalled phone numbers, sold by the provider. You can reconnect the service yourself:

You can disable the service on MegaFon:

Immediately after deactivation of the offer, commissions are no longer debited, and you can only talk to one subscriber at a time, without receiving information about other incoming calls to the phone number.

Conclusion

Often, clients cannot figure out where the money from their phone balance is spent if no paid transactions have been made. As a rule, such expenses are caused by write-offs for comfortable services. To avoid unnecessary costs for accidentally using such options, it is better to disable them in advance, including the call-holding service on MegaFon.

There are often situations when, trying to reach another subscriber, we hear special signal, warning us that the called party is busy. This means that on this moment, the person we want to reach is talking on the other line.

However, cellular communications have advanced far in their developments and the Beeline company is ready to offer its subscribers special service– “Waiting for a call.” This service is convenient because it allows its subscriber to receive several calls simultaneously, without disconnecting from the previous one.

Description of the service Beeline Call Waiting

A special option – “Call Waiting” allows its users to receive calls on a second line, while placing a parallel conversation on hold. Almost all users use this service cellular communication. However, there are a number of people who still do not suspect the existence of this opportunity.

Some people ask the following question: “Why is it necessary at all? this option?. The answer to this question is simple - it is needed so that you do not miss the right call. For example, if you are engaged in any kind of activity and constantly receive calls from clients, then this kind the service will be a worthy assistant to you. There are often situations when a client, having heard a signal indicating that the subscriber is busy, calls another representative of these services. Thus, you risk losing valuable customers.

Your options, if you install the “Call Waiting” service, are as follows:

You will be able to hear a special signal that will notify you of a parallel call.
You will be able to put the current conversation on temporary hold.
You will be able to accept incoming call, without interrupting the previous one.

You should know that the big advantage of the service is that, if necessary, you have the opportunity to call any subscriber without interrupting the current conversation. To do this, put the current conversation on hold and dial another number.

Accepting an incoming call is quite simple. To do this, warn the person with whom you are talking that you will interrupt the conversation for a while and, without putting the conversation on hold, answer the incoming call. If you need to switch from the second call to the first, then you should know that the transition between conversations is carried out using the number - 2, located on your keyboard.

How to connect Beeline Call Waiting

If you have not yet installed this service, then doing so will be quite simple. Activate so convenient service, in several ways:

Using special code- *43#, which must be dialed on your keyboard cell phone, and then press “Call”.
The second way to connect is to set up the service through your Personal Account, which is located on the official Beeline website.
Another method to connect the service is to use special menu- “Call Waiting”, which is located in your cellular device.

You should know that there are situations when the service begins to behave incorrectly. In these cases, reconnect the service using the code - *110*041#.

How to disable Beeline Call Waiting

Since the “Call Waiting” service is free, there are no commands to disable this service. However, if it is important for you to disable this service, then try to disable it through your Personal Account, or through the phone menu.

When talking with friends or family on abstract topics, you need to take care not to miss an important call, for example, from your boss or work colleagues. To do this, Beeline provides the ability to connect a second line provided as part of the Call Waiting service. She allows you to accept a second call by placing the current call on hold.

How to enable a second line on Beeline

In order to connect a second line on Beeline, you need to dial the USSD command *43#. After connecting we will be able accept two calls at once. The service provides the following features:

Accepting a call during an ongoing conversation - press number 2 and the call button;
Making a call during an ongoing conversation - press number 2, then the call key, dial the phone number and press the call key again.

In both cases, the first conversation will not be interrupted, but will remain hanging in anticipation. You can return to the first conversation by pressing two and the call key. When the second call is received, the called party hears short signals, and a number appears on the screen caller– after this you can take appropriate actions.

You can manage calls not only number keys, but also using the phone itself. All modern and even outdated phones support second line control by pressing control keys– when accepting the second call, appropriate prompts will be displayed on the screen. As already mentioned, the second line on Beeline is provided completely free of charge.

As for the cost of calls, the prices do not change - incoming calls remain free, and outgoing calls are charged in accordance with the direction used (if you are in home network). If for some reason the second line begins to fail, responding to callers with busy signals, you should reconnect the “Call Waiting” service. To do this, you need to use the USSD command *110*041# or call the special service number 067409041.

After reconnecting the service, it should show correct operation. If you encounter any difficulties, contact the support service at 0611.

How to set up a second line via phone

You can activate the “Call Waiting” service and get a second line at your disposal using your mobile phone. Looking at the call settings menu, we will find the “Call Waiting” item there (or “Second Line”, which depends on the phone model). By selecting this item, we can get information about the service status. Its connection is also made here.

You can receive information about all missed calls when your phone is turned off or is out of network coverage using the Beeline “They called you” service, which we talked about earlier.

Users of the “Personal Account” can activate the “Call Waiting” service directly on the Beeline website by logging into the service using their username and password.

How to disable the second Beeline line

Does having a second line cause any inconvenience? Well, then it's better to turn it off. For this we can use " Personal account» or the call settings menu in your mobile phone. The second line will be disconnected almost immediately. If you want to return this opportunity, you can use the USSD command *43#.

While talking with friends or relatives, you may receive a business call from your boss at work. In order not to miss an incoming call, Beeline subscribers have the opportunity to install a second line. After connecting the option, you don’t have to worry about missing important conversations.

The “Call Waiting” option allows the subscriber to put one conversation on hold and receive parallel call. To the one who has this service is not connected, you won’t be able to get through while he’s talking. Second line in similar situations can hear that the subscriber is busy and cannot answer.

When connected, you can not only receive incoming calls during a conversation, but also call a second subscriber by putting the first one on hold. The service is free and available to everyone, regardless of the connected tariff.

How to connect “Call Waiting” from Beeline

Making a second line is quite simple and there are different ways to do this:

Install using *43# command .
Turn on Beeline via your computer or phone by finding this function.
Your phone settings may have a “Call Waiting” feature. It needs to be turned on.

If the function becomes unstable, it should be reconnected. To do this, you need to send a request with the code * 110 * 041 # .

Option management

During negotiations on the first line, the second will make itself felt short beeps. To answer an incoming call, you need to click on “Call Hold” in a conversation with the first caller.

How to disable the second line

The option is free, so the service does not provide commands to directly disable it. However, if you need to disable the Beeline “Call Waiting” service, you can do this in several ways:

Log in from any device and go to function management. It shows all connected services that can be disabled;
go to the nearest Beeline office and ask the consultant to remove the option from the number;
call on toll free number and leave a request to the dispatcher to disable this function.

“Autopayment” service from Beeline: description of the option, connecting and disabling autopayment from a bank card

Either method will only take a couple of minutes. After the procedure, an SMS notification will be sent to your number, informing you about the successful operation.