Where to find the name of the network card. Network card for a computer. How to change card settings

Instructions

Open the Computer Management window. To do this, click on “Administrative Tools” in the “Control Panel” applet. Go to Device Manager. Click on the plus sign next to the “Network cards” line. A list of all installed network cards will open.

You can quickly get information about the model and manufacturer using Device ID and Vendor ID on the website www.Pcidatabase.com. To do this, enter the received values in the appropriate fields.

Video on the topic

A network card is a device that connects a computer to a network; it is also called a board network interface. Several of them can be installed on a computer. All of them can be viewed in Device Manager.

Instructions

Right-click on the “Computer” icon and select “Properties”. The “System” window will open in front of you.

The Device Manager will open in front of you; it allows you to view everything installed on the equipment and configure its properties. Find the line “Network adapters” and click “+” opposite it, all will be in the expanded list network computers.

Helpful advice

To view all the information about your computer, it is convenient to use specialized software, such as SiSoft Sandra.

After Windows reinstallation Often there is a need to install additional driver on separate device. Operating systems contain drivers for only a small part of computer equipment, and some devices require newer drivers than those originally installed. One such device is LAN card. It is quite difficult to determine the card model - the board itself does not have clear indications of the model name.

You will need

A computer with Internet access.

Instructions

Log in to Task Manager. To do this, right-click on the My Computer icon, in context menu Select Task Manager and left-click on it. A window will open containing a list of all devices installed on the PC, grouped by semantic categories.

If the card model is computer generated, then it will be considered unidentified device, have a question mark icon yellow color. It is usually called an Ethernet controller and is located in the network devices group.

Right-click on the network card icon. In the context menu that appears, click Properties to open a window with device information. It will list information about the device driver, its manufacturer, the resources it uses, and its physical connection to computer systems. The model of the network card will also be indicated here, if the system was able to detect it. Otherwise, continue with the steps below.

Click the Details tab at the top of the device properties window. Click the drop-down list at the top of the window to open it and select the item containing the device instance code. A set of letters, numbers and special characters, which designate this particular network card.

Copy the code by pressing the combination Ctrl keys and C, and save it. You will need it to find a driver for your network card. installed model. You should enter the received code in any search engine- in its output there will definitely be an indication of the driver for the network card.

Download the driver and install it. After installation and reboot the system, go to the properties of the network card again. If the driver was installed correctly, the network card model will be indicated there.

Helpful advice

If you need to determine the card model on laptop computer, it makes sense to search by its model - such devices have the same hard-coded set of equipment.

A network adapter or card is an integrated or optional peripheral device that allows a computer to create, connect, and communicate with wired and wireless networks. To find out its manufacturer and model, use one of the suggested methods.

Instructions

If your network is already installed on your computer, you can look warranty card or a receipt, of course, provided that you have kept the original box from the device. The warranty card always indicates the full name of the manufacturer and model of the device.

If you are looking for the model of your network card or card to download drivers on clean version Microsoft Windows, does not contain built-in device drivers, go to the network card manufacturer's website. Find the driver download page and software. Usually it is called Downloads, Drivers, etc. Most likely, the site will automatically detect your network card. If this does not happen, download all available drivers and try installing them through a driver update in Device Manager. There is also a possibility that when connected to the Internet, the operating system itself will detect the model of the network card and load required driver.

If the driver is already installed and you need to find out the manufacturer name and model number of the network card, go to the panel Windows management via the Start menu or system folder"My Computer" and double-click the "Device Manager" shortcut, after switching to the "Small Icons" or " Large icons" In the Device Manager window that appears, find the “Network adapters” section and expand it with a single left-click. Everything will be listed there network devices, including Wi-Fi. Double click on the device name to view details about it and the driver installed on it.

You can also open the case by carefully removing the network card (if it is not integrated) from the LAN slot and look at the label on the sticker in the corner of the network card.

Your computer, like any other, contains a large number of equipment. Find out the name of each of them without resorting to software methods, almost impossible.

You will need

- a program for determining the computer configuration.

Instructions

In order to determine the model controller motherboard, open computer properties. In the window that appears, select the “Hardware” tab and launch the manager Windows devices. In the list of equipment that appears, find the controller you need and rewrite its name. A similar sequence applies to other devices, for example, video cards and sound adapters, modems and network cards, and so on.

Use a special program to view the equipment configuration. To do this, download the Astra utility or any other that is most convenient for you to use, install it, run it and view all available computer devices.

Also try to determine the type of computer controllers without installing third party programs and taking advantage standard utilities Windows operating system. To do this, expand the Start menu list and open the Run item. Enter msinfo32 into the empty field. In the window that appears on the left side, select what type of controller it is - audio, sound adapters, and so on.

Opening the desired directories one by one in the folder tree on the left, find the controller you need and select it with the mouse button. View the information available about him on the right side of the window. If necessary, rewrite it or, best of all, save it in text file for further quick access when searching.

To view processor parameters and random access memory, go to the “My Computer” menu, click on empty space right click and view the configuration. Usually the type and model of the processor, its manufacturer and frequency are reflected there. Information about RAM is also displayed.

note

Be careful when choosing device drivers and always look for system information before installing them.

Sources:

how to find out who the domain controller is in 2019

After installing the operating system, it is extremely important to select required versions working files for some devices. Most often, installing new drivers allows you to increase equipment productivity.

You will need

- Sam Drivers;
- Internet access.

Instructions

To search for network drivers cards can be used various methods. First try to find necessary files by visiting the official website of the manufacturer of this equipment. If you are setting up mobile computer, then it makes sense to visit the website of the developers of this device.

Download the found files. With help WinZip programs or its equivalent, unpack them from the archive. Now press the “Start” key and right-click on “My Computer”. Go to PC properties.

Open the "Device Manager" menu and find the device you need network adapter. Go to the properties of this device. Select the Drivers menu and click the Update button. In the next dialog menu, select “Install from a specified location.”

A device such as a network card allows a laptop or computer to work on the Internet and local network via WiFi, connected via USB or via special cable. The adapter provides a unique address called a MAC that identifies the computer device transmitting packets of information over the network. If you cannot connect with a cable, you can purchase a wireless wifi adapter for your computer equipment.

What is a network card

An element of the hardware configuration of a laptop or computer is called a Network interface controller, which provides the ability to connect to a network, ensuring interaction between devices. Network cards are LAN adapters, NICs, Ethernet adapters or interface cards. Now the Network interface controller is part of the computer package, but previously it was produced separately.

Types of network cards

The Ethernet adapter is designed to connect computer devices V local network. The Network interface controller, which provides an Internet connection, has the main characteristic of data transfer speed. The NIC uses high-speed interfaces to interface with a computer device. There are 4 structural type computer boards. They all have basic pros and cons.

Types into which microcircuits are divided according to physical implementation:

integrated - as the name suggests, built into the motherboard;
wireless – for bluetooth networks and WiFi;
internal (separate boards) – connected via PCI, inserted into a PCI-E or ISA slot;
External network cards for laptops are inexpensive and connect via USB.

Why do you need a network card in a computer?

The main purpose of a network card is to connect computer devices with each other. The Ethernet adapter provides connection to the Internet. If there is no built-in Network interface controller, then USB modems are used, but then the ability to work over the network is reduced. By combining computers, laptops, peripherals(scanners, printers, etc.) on the same local network, you can exchange data via WiFi within the boundaries of an apartment, house or provider network.

Principle of operation

Some of the functionality of the Network interface controller can be transferred to CPU or driver. Information is transmitted over the network, which is grouped into data packets. They move from one device to another. There is software and Hardware involved in data transfer. NIC refers to hardware. He is responsible for establishing physical connection between devices. An 8-pin RJ-45 or 15-pin AUI connector is used.

Where is the network card located in the computer?

The network card in the computer is located in the system unit. You can find it by slightly opening the side cover of the system unit. Modern computers do with an Ethernet interface. The built-in NIC is soldered to motherboard. If it is not built-in, then it is inserted into one of the free white slots. Operation and data transmission is carried out using a cable with optical fiber, connected to the adapter connector.

What does a network card look like?

You can see what a network card looks like in online stores that have photos of devices. Externally, the device looks like a flash drive, and internally it looks like a small chip or board located near the connection connector computer network. It is curved on one side. If you don't open sidebar system unit, the location of the Network interface controller looks like a cable socket.

How to find out your computer's network card

In the operating room Windows system It will not be difficult to determine the NIC, which is necessary in case of a malfunction or when replacing. Programmers call such adapters consumables, because they tend to break. Network card for PC – an important part system configuration, so you can use it to detect it special programs such as "Everest" and "AIDA64". You can determine the model name yourself by following the path:

Start.
Control Panel.
System and safety.
System.
Device Manager.
Network adapters.

How to check if a network card is working properly

Not working network card for a computer or a faulty Wi-Fi card will not allow you to access the Internet or local network. Serviceability problems may be hidden in system settings(if you have a built-in LAN adapter) or in the cable connection density (if external). You can try updating the drivers or testing. Verification is carried out in the following way:

Computer properties.
Device Manager.
If there are no exclamation marks next to the name of your adapter, then the equipment is detected normally. Contact your provider.

How to install a network card on a computer

Before you decide to purchase a LAN adapter, you need to make sure that the motherboard does not have its equivalent. The NIC can simply be disabled. To enable it, you need to activate it in basic system input/output (BIOS). If it really doesn’t exist, then buy a NIC at a computer store, and then install and connect the network card:

Remove the side cover of the system unit.
By selecting free place on the motherboard, remove the plug on the back of the unit.
Install the NIC, secure with the mounting screw.
Connect the cable to the LAN adapter socket.
Turn on your computer. will flash light diodes, notifying about the exchange of information with the network.
Set up the connection: install the driver for the network card, register the server DNS (dns).

Price

The adapter will cost up to $5. The set of functions can be selected as desired (adapter with higher data transfer speed, 2 SFP ports). You can order a set of adapters through the catalog in specialized stores computer equipment or buy in the online store (from 299 rubles). In the table below you will find the price of a network card in Moscow.

The computer is great smart thing. But without special board, called the network card, which is located on the motherboard, will not be able to access the Internet. Very often, reinstalling operating system or when network problems arise, determining the network card model comes to the fore. So how do you find out the network card model?

Then, in addition to the computer itself, you need a network card, the Everest utility and the ability to access the Internet.
The user must know what a utility is. But clarification will not hurt - this is a program that solves auxiliary problems. Utilities can be classified as follows: utilities service computer; utilities for expanding functions; information utilities.

by clicking on “Administrative Tools” in the “Control Panel”, open the “Computer Management” window;
go to “Device Manager”;
click on the plus sign next to the line “Network cards” and open the list of cards that are installed;

by typing “Cmd” in the “Run” column, launch the command line;
A window will open and enter the command “ipconfig /all” into it.

As soon as the command is executed, information about the network cards installed on the computer will appear on the monitor.

How to find out the model of a network card, examining a patient

It is possible that the system will not detect the network card. There are no drivers for it either. Then it makes sense to go to visual definition card models.

You will have to remove the network card from the slot, and enter the data on the manufacturer’s label into a search engine, any one on the Internet.

We look at the equipment ID

The network card model can be determined by “Vendor ID” and “Device ID”. Data is entered during BIOS boot. You can use the Everest utility. To do this, install the utility, open program window and go to the “Device” tab. Next, in the upper right window, expand the “Unknown” tab, which appears with a question mark. You need to click on the sign next to the “Network Controller” line. Then in the lower window you can see the “Hardware ID” and the VEN and DEV values. VEN is a code that identifies the manufacturer. The DEV code is responsible for identifying the device. Using these codes, the program will identify the device and display the information on the monitor.

Determine the network card model by “Device ID” and “Vendor ID”. This data is displayed when loading BIOS or you can use the Everest utility. Install the utility, open the program window and go to the “Devices” tab. Expand the “Unknown” tab in the top right window, marked with a question mark. Click on this sign located next to the line " Network Controller" A “Hardware ID” with VEN and DEV values will appear in the lower window. VEN is the code identifying the manufacturer, and DEV is the device. Using these codes, the program identifies the device and displays information on the monitor.

If there is an urgent need to find out about the model and manufacturer, then you need to use Vendor ID and Device ID to find the website www.Pcidatabase.com. Here you simply enter the received data into the appropriate fields.

A very simple solution!

It’s easy and simple to look at the receipt or warranty card if the network card is new and already installed in the computer. Provided that original box from the device is prudently stored. By the way, when purchasing, the sales consultant will remind you not to throw away all your computer packaging for about a year. It's another matter to listen to such advice. As practice shows, it is worth listening. So, having a warranty card, you can always read the full name of both the device model and the manufacturer.

P.S. So we answered the question of how to find out the network card model... as you can see, everything is simple, and which option suits you better is your choice 😉

In contact with

Finding out which network card is installed in your computer is not difficult. There are two options for the development of events. Either you don’t have a driver installed for your network card and you need to find out its model to find the driver, or everything is fine with you and you’ve become terribly curious about what kind of network card you have installed.

Let's start with the last case. There are a couple here simple options. In the first case, click on the “This PC” icon or simply “Computer” right key mouse and go to “Management”.

Go to the “Device Manager” in the left column and in the main section open the “Network Adapters” category and look at what network card you have installed. There may be several devices.

In my case, the network card is Realtek PCIe GBE Family Controller. There are also two virtual network adapters from the virtual VMware machines. Lovers command line They can simply type the command “ipconfig /all” in the console and you will also see which network you have installed.

This command is also convenient because you can see not only the model of your network card, but also other important data, such as: MAC address, IP address, subnet mask, etc.

In case you need to find out the model of your network adapter in order to install network driver, then you won’t be able to do this in the device manager, since your network adapter will be indicated as unknown device. IN in this case better use third party software, for example, the AIDA program.

You can download it absolutely legally for free, but only for 30 days. I think this time will be enough for you to see what devices you have installed, in particular the network adapter, and download drivers for them. After opening the program, go to the “Network” section, then to the “PCI / PnP Network” subsection and look at what network adapter we have installed. By the way, only real network cards are shown here, no virtual ones, as in the device manager.