D link dir 615 revision. Where and how to download the latest firmware. Download software

The router firmware is one of the most important moments during its operation. Safety and stability of work largely depend on this computer network. Therefore, in order for your router to make full use of the capabilities built into it by the manufacturer, you need to keep it up to date. Next we will look at how this can be done in such a common router model as the D-Link DIR-615.

For a novice user, the process of updating the firmware may seem like something very complex and difficult to understand. However, in reality this is not the case at all. The D-Link DIR-615 router has two update methods.

Method 1: Remote update

Remotely updating the router firmware is convenient because it requires minimal effort from the user. But in order for it to work, you need to have a configured and functioning Internet connection. In the future you need to do this:

The update itself takes some time, during which the browser may display an error message, or even give the impression that the process has frozen. You should not pay attention to this, but be patient and wait a little. Usually everything takes no more than 4 minutes. After the router reboots, the new settings will take effect.

In the future, you just need to periodically check the relevance of the firmware using the above method.

Method 2: Local update

In cases where the router does not have a configured Internet connection, there is no section in the web interface automatic update The software or the user simply does not want to use it the previous way- D-Link DIR-615 firmware can be updated in manual mode. To do this you should:

In the future, everything will happen in the same way as with a remote update. After the process is completed, the router will reboot with the new firmware.

These are the ways to update the firmware in D-Link router DIR-615. As you can see, there is nothing complicated in this process. However, this does not relieve the user of the need to be careful when choosing a firmware file in case local update. Choosing software designed for a different revision of the router may cause it to malfunction.

The Dom.ru company often issues to its Wi-Fi users routers from D-Link. One of the most popular is DIR-615. Moreover, users were given different versions of this router - DIR-615 K1, DIR-615 K2 and DIR-615 R1. And they all walked with terribly stripped down firmware from Dom.ru, which almost completely blocks the capabilities of the router from the user. Therefore, I decided to post instructions on how to remove the Dom.ru firmware on the DIR-615 router and install the factory one there.

Before you do anything, download from the site D-Link firmware for your hardware version of DIR. To do this, turn it upside down and read the letters on the sticker that come after the model number. For example, K1 or K2. After that, go to the official server of the manufacturer, download latest version on your computer and put it in the root directory of the C:\ drive.
One more thing - in order to upload the firmware to Dlink you will need a TFTP client. It is turned off by default in Windows 7 and Windows 8. You can enable it in “Control Panel” >>> “Turn Windows features on or off”:

Check the box " TFTP client» and press the OK button. That's it, now we are ready for further actions.

Removing DIR-615 firmware from Dom.ru

1. Disconnect the provider cable from the router and connect it to the computer. Moreover, we connect the computer to the first LAN port of Dir-615.
2. In settings network card we register on the computer static IP address:

IP address - 192.168.0.2
Subnet mask - 255.255.255.0
Gateway - 192.168.0.1
DNS server addresses may not be specified.

3. Turn off the router.

4. Launch on the computer command line and in it - the command: ping 192.168.0.1 -t

5. Using a rod or paper clip, press the reset button on the router (“the hole” on the back of the router) and hold it (sometimes it takes about a minute to keep it pressed).

6. Turn on the power to the router. And we look at the pings. As soon as there is a stable response without loss, release the button.

7. Interrupt pings using the Ctrl+C key combination and write a new command:

tftp -i 192.168.0.1 put<путь к файлу прошивки>

In my example, the file with the firmware is called 20140711_1343_DIR_615K1_2.5.4_sdk-master.bin and is located in the root of the C:\ drive. The command will look like this:

tftp -i 192.168.0.1 put C:\20140711_1343_DIR_615K1_2.5.4_sdk-master.bin

Press the Enter button and look at the result. If everything is fine, the answer should be something like this:

Successful transfer of 3345428 bytes in 12 seconds, 1334415 bytes/s

After this, the WiFi router should reboot and start with the new factory firmware. Once again we reset the settings by pressing Reset buttons for 8-10 seconds and try to access it via http://192.168.0.1. The login will be admin and the password will be admin.

Internet providers in Voronezh have been developing and multiplying with enormous speed, in connection with which you have to change and upgrade your client Internet equipment. For a long time I used an ADSL2+ modem to access the network and inexpensive Wi-Fi router, but my provider decided to start in parallel with access via telephone line provide the ability to connect via Ethernet or as Domolink calls it - Fttx. At the same time, it also became available free service Open TV, which is nothing more than IPTV via UDP protocol. All this prompted me to replace the simple Level ONE WBR-3408 with something more functional. To my surprise, it turned out that functionality does not always go hand in hand with at a high price. About how and why I chose D link dir-615 can be found under the cut.

Brands and prejudices

It should be noted that I did not come to Dlink right away, at first, wondering which company to choose, I was inclined towards routers ASUS because The company itself inspires confidence, and I have repeatedly seen various firmware for them on the Internet. Without delving too deeply into the specifications of routers, I went on a search. The main parameter for me was support Wi-Fi standard N and correct work with IPTV, having come to the store and asking the sellers, I received a box with an Asus rt-n13 router on which there were inscriptions that the device supports DraftN and IPTV. Setting up the Internet and Wi-Fi did not cause any difficulties, but IPTV on the computer stubbornly did not want to get along with the raised Ppoe session, either one or the other worked. Without hesitation, I decided to contact Domolink technical support, where they told me in a pleasant voice that this service works only on dlink dir-100/120 routers without Wi-Fi and dir300/320 with Wi-Fi standard G. Deciding to look alternative firmware, I was surprised to not find any, and this is where the experiments with the router stopped, and somewhat upset, I resigned myself to the lack of IPTV. A couple of months later, on a local forum, I saw an advertisement for the sale of Dlink dir-615 routers at a very good price, new, but without a guarantee. Without thinking twice, I went to Ebay and was convinced of my suspicions about their origin, prices started from $30 including delivery . After checking the support for this model on the DD-WRT website, the lot was immediately ordered.

Dlink dir-615 revD

I will not describe the process of receiving parcels at the local Russian Post, I will only say that the packaging was somewhat wrinkled, but absolutely intact. When I came home, I found in a box standard set from manuals, patch cord, settings disk, power supply and the router itself. To my surprise, the antennas turned out to be non-removable, as it later turned out, there are different revisions of this model of routers; I received a revision model D2 with a completely black case, non-removable antennas and a Ralink 3052 processor. Other revisions may differ in both the color of the case, the processor and the design of the antennas. Having connected everything to the PC and seeing the standard interface network equipment I decided to check the Dlink operation before flashing it to DD-WRT, the Internet and WI-Fi dutifully started working, TV was still missing.

Official “sparse” characteristics of the router:

Hello Linux DD-WRT

Flashing Dir-615 to DD-WRT is as simple as possible:

1. Find dir-615 “router database” on the dd-wrt website (be sure to check the revision of your router with the one listed).
2. Go to the Dir-615 revD2 page in the router database and download the file dlink-dir615d-factory-webflash.bin
3. Log into the router, and standard firmware find item Firmware Update, point to the downloaded file and click Update.

When unsuccessful firmware, due to a power outage or other unforeseen circumstances, there is no need to panic too much, this router has an emergency bootloader which you can use using the following instructions:

1. Disconnect the router by unplugging all cables (both power and LAN).
2. Register in settings network connection the computer has a static IP address 192.168.0.2, mask 255.255.255.0, gateway 192.168.0.1, DNS 192.168.0.1
3. Connect the computer and router via WAN port on the router.
4. Press and hold Reset on the router.
5. Turn on the router (plug in power).
6. Wait 5 seconds.
7. Release Reset.
8. Log in through a browser at 192.168.0.1
9. On the page that opens, click Review and select original file firmware for the router. (link to original firmware I will post Dir-615 revD2 at the end of the post).
10. Click Upload and follow the instructions.

If everything went well, after a while the router will blink the LEDs and go to reboot. Now you can go to the router at http://192.168.1.1/. It should be noted that the interface of this firmware is much more friendly and functional than the original Dlink, there is no need to be afraid that Linux on the router is definitely a console and reading a bunch of manuals, in 90% of cases everything is configured in a couple of mouse clicks. DD-WRT interface you can try it on following link: http://dd-wrt.com/demo. Those who are afraid of English can switch the interface to Russian in the tab Administration-Management, which not every official firmware can boast of.

Setting up DD-WRT for Domolink and IPTV

When you first log in, DD-WRT, taking care of your safety, will persistently send you to invent new login and password. After this, you can proceed to setting up your Internet connection and IPTV directly.
Internet connection is configured in the tab Setup-Basic Setup and connecting to Domolink requires literally a couple of clicks:

1. Select Type Connection - PPPoE
2. Fill in the User Name and Password fields
3. Click Save and Apply Settings at the bottom of the page

After this, the LED with the “planet” should change color from orange to green, if this does not happen, check the entered data again, and if everything is correct, go to the tab Management and at the bottom of the page click Reboot Router.

If the connection is successful, you can proceed to setting up IPTV:

1. Go to the tab Security and disable SPI Firewall. Click Save.


2. Go to the Administration-Commands tab and paste the following text

ifconfig vlan2 1.1.1.1 netmask 255.255.255.0 broadcast 1.1.1.255
cd /tmp
sleep 30
wget http://dl.dropbox.com/u/14930004/udpxy
chmod +x udpxy
/tmp/udpxy -a 192.168.1.1 -p 4022 -m 1.1.1.1 -B 1Mb -M 30

3. Click Save Startup, then go to the tab Administration-Management and at the very bottom of the page click the Reboot Router button.

Explanations:

vlan2- appropriate interface wan port, may differ in different routers, look in the Setup-Networking tab in the *WAN Port Assignment*
wgethttp://dl.dropbox.com/u/14930004/udpxy- a site with a direct link to the udpxy file, with each download the router downloads udpxy from there and launches it. I use this storage, but I'm not sure how long this file will last there. Therefore, I will post it separately below. For different routers with DD-WRT file UDPXY will be different, I selected it at random, downloading different UDPXY from the DD-WRT forums.
*/tmp/udpxy -a 192.168.1.1 -p 4022 -m 1.1.1.1 -B 1Mb -M 30* The allocated value corresponds to the cache allocated to the stream in the router, I lowered this value to 1Mb because for more high values the picture was falling apart, if the image has artifacts, you can play with this value.

After completing the steps, you need to check whether UDPXY has started, this can be done using the following link showing statistics

People often ask the question: how to update firmware on Wi-Fi router e D-Link DIR-615 K2. A firmware update may be needed for several reasons, one of which is unstable work old firmware. On the Internet you can often find user complaints about unstable firmware, which periodically resets settings saved by the user.

According to user reviews, the problem is that firmware up to version 1.0.19 fails, which we will install today, i.e. flash the D-Link DIR-615 router.

First, we determine the revision of your router. Now we will not go into details of what the revision implies, let’s just say that it comes in several versions: B, C, E, K (K1, K2), M, O.

The revision version can be found on the sticker on the back of the router, where the barcode is located. My number looks something like this:

H/W Ver.: K2 F/W Ver.: 1.0.0

Here H/W Ver.:- indicates the revision version, and F/W Ver.:- indicates the firmware version.

I have a version revision K2.

Now that we know the revision version, we go to the official D-Link website and look at the desired revision.

For example, I have a revision K2, so in the window that opens via the link, click the link RevK/, and then K2/. A list of files will open, more precisely one file and a folder Old/. File 20130418_1713_DIR_615K_1.0.19_sdk-master.bin and it will be the same firmware version 1.0.19 , which is on this moment is the latest firmware for the router. In folder Old there will be old versions of the firmware, which you can return to if you don’t like it new firmware. Well, now let's get down to the firmware process itself.

1. Download the latest firmware version. For D-Link router DIR-615 K2 The latest version is this one ftp.dlink.ru/pub/Router/DIR-615/Firmware/RevK/K2/20130418_1713_DIR_615K_1.0.19_sdk-master.bin.

2. Save the downloaded file to HDD computer and go to the Web interface of your router. It is advisable to connect the router to the computer via network cable, which came with the router. Although you can just as well use a wireless connection.

3. After logging into the router’s Web interface, the main menu will open, at the top of which your firmware version will be shown, as well as in the section Device Information:

4. Click on the firmware version and a window will open in which you will be asked to select a file with the firmware.

5. Click on the button Review and specify the previously saved firmware file 20130418_1713_DIR_615K_1.0.19_sdk-master.bin.

6. Click on the button Update and wait for the router to reboot, after which your router will be updated to the latest firmware.

Conclusion

If you did everything correctly, your router will work with the new stable firmware. Firmware updates rarely cause problems, so there's no need to worry about something going wrong.