The front speaker does not work on Android. Why might the speaker on your phone not work? The housing openings in the speaker part are dirty

Users mobile gadgets often encounter problems with sound deterioration on their devices. RosCase will talk about the main problems and advise what to do in a given situation.

As practice shows, the most common reason that the sound on the phone is lost is a change in the settings. Perhaps you just accidentally turned down or turned off the volume, and therefore your phone stopped informing you about calls through audio effects.

Go to the sound settings and set the volume level to maximum. Then check the speaker operation. If everything is in order and the sound appears, then you panicked in vain - and now you can continue to safely use your device. If no changes occur, we recommend continuing to check the device to determine the cause of the failure. If you cannot identify the cause on your own, contact electronic device repair specialists.

Often the sound does not disappear entirely, but is simply distorted. The problem may be that the speakers have become dirty over time. And to clean them, it is not at all necessary to carry the device in service center. This can also be done at home. We'll tell you how to clean your phone's speakers and improve sound quality.

During operation, dust, dirt and small debris get onto the fine mesh of the speakers. A layer is formed that prevents normal playback sound signals. Cleaning will help here. To do this you will need alcohol and a toothbrush. Soak it in small quantity alcohol - and carefully treat the surface of the speakers. All dirt should transfer to the bristles.

A very fine needle may also help. With its help, you can push the dirt and clear the mesh holes. Just remember that you need to do this very carefully so as not to damage the speaker itself.

Also check if the sound in your headphones works. If yes, then it really is a matter of dynamics. If the sound is reproduced perfectly through the speakers, but is not audible through headphones, the problem may be that the 3.5 mini jack input is damaged. With such a malfunction, it is better for you to contact a service center. This part may need to be replaced.

In some devices, the sound does not disappear completely, but begins to be reproduced with wheezing and noise. After studying many different forums, we came to the conclusion that we need to replace back cover if the speaker on your phone wheezes. You can also try widening the hole for the speaker. The aesthetic appearance may deteriorate, but the sound should improve.

Some users are faced with the problem of sound playback while watching videos. The reason may be the lack of the required codec on the device. Install MXPlayer - this program will automatically recognize which codec you need and download it from the network - and you can watch the movie with sound.

You don't know how to increase the volume on your phone and want to make it louder than the settings allow? Specially developed for such cases special applications. For example, the Volume+ program will allow you to increase the volume of the device, the bass level, and the sound of the call signal within a few minutes through simple manipulations. It’s just worth considering that what louder sound, the more distortion may appear.

Do you want to receive high quality sound without any wheezing? We advise you to buy speakers for your phone. They will increase the sound as much as you would like it to. Today there are a variety of wireless speakers. On our website you can different forms, dimensions, colors. Some have a call answering feature so you don't have to look for your phone to answer a call. Special button on the column will provide you with a quick answer to your call.

If your smartphone is in a case, then the speaker will be protected from dust and debris falling on its surface. Your gadgets will always be under reliable protection in cases from RosKeys!

A situation where the sound on the phone is lost can deprive its owner of the opportunity to listen to music, watch videos, and even respond in time to incoming call.

Most often, the problem concerns the main one, not the conversational one (the sound of which is not heard, as a rule, if it is out of order), and is solved by contacting the service.

However, there is a possibility that you can figure out the missing sound yourself.

Checking settings

If the sound disappears without visible reasons(water has not entered the smartphone, it has not fallen or been damaged) or the speaker is silent when starting a new file, it is recommended to first check the volume control.

It is regulated and called physical button, for most, located on the left side, or in the settings.

Sometimes the slider is accidentally moved by the user himself - for example, in the process, for which the “volume +” or “volume –” keys are often used.

Checking the regulator also helps in cases where the volume has not completely disappeared, but only in some applications.

The problem is solved by adjusting the volume directly in the program - for example, in a game or music player.

When playing a multimedia file, there may be no sound due to unsuitable codecs - the situation can be corrected by downloading a suitable player.

Should know: Reasons for the disappearance of sound include accidentally switching on (or not switching off) the “quiet”, “silent” or “airplane” modes. The issue is resolved by switching to standard settings.

Solving serious problems

In cases where all settings and controls have been checked, normal mode turned on, but there is still no sound, the reasons may be serious enough to contact the service.

However, there is no need to rush to specialists just yet.– it is possible that you will be able to restore the sound of the speaker on your own.

As a last resort, you can at least independently determine the cause of the problem by estimating the cost of repairs.

Software problems

The sound on the smartphone disappears as a result of a software glitch.

Signs that the speaker has stopped working for this reason are: are:

several recently installed programs - especially if at least one of them was downloaded not from the application store, but from others, less reliable sources;
launching utilities, including (root rights);
recently performed a factory reset or by yourself user installed firmware.

The cause of the problem may be a conflict in one or more installed applications with other smartphone software.

This problem is usually solved by deleting recently installed programs or .

A more serious problem arising from incorrect firmware or a virus, sometimes you have to decide which one should be entrusted to specialists.

Important: You can avoid most problems with programs (relating not only to sound) by installing them only from trusted resources. Cope with malicious code Antiviruses installed on your smartphone will allow you to do so, especially since you can find quite effective and free options such utilities.

Speaker malfunction

One of the most common causes of sound loss is problems with the main (also called “music”) telephone speaker.

They can be divided into three types:

The speaker is clogged, due to which the sound may disappear almost completely, however, maximum volume a quiet sound can be heard. You can try to clean the part yourself using a cotton swab, toothbrush or thin needle. However, if the owner lacks experience, it is advisable to have the problem solved by a professional.
Short circuit coils. A similar problem appears with both the main and the conversational speaker - in the latter case, the sound may disappear completely, but sometimes the connection only deteriorates significantly (the interlocutor is almost inaudible). The solution to the problem is to replace the coil.
The coil has completely failed. There is no sound at all, but only new part, installed in the service.

Proof that it is the main speaker that has failed is the presence of sound when using a headset.

The problem with the conversational (auditory) “speaker” is expressed in the absence of sound during a call.

If you can’t hear anything even in headphones, not a single speaker works, you should continue to look for the reason further.

Problems with the audio amplification board

Silence in the speakers and headset may be evidence of a failed audio amplification board.

Sometimes such a breakdown leads to complete absence.

But most often the volume ceases to be adjusted, remaining at the same level, regardless of the settings - and, if the sound was initially set to “minimum”, neither music nor soundtrack You won't be able to hear the video.

The reasons why such boards fail include mechanical damage and liquid getting into the case.

Affects the part and heat constantly working in mode full load mobile phone, and manufacturing defects.

The problem can only be solved by replacing the board.

Cable failure

If it's not about modern building type “candybar”, and about the older, but still used (even on new models of type 2) “clamshell” form factor, the problem with sound may be associated with the cable.

This element, typical for folding phones, wears out and fails faster than other parts with constant use.

Similar problems with cables were observed in slider models– but this one has not been used for a long time.

Signs of wear on the contacts of the cable are not only the loss of sound, but also the inability to regulate it.

Sometimes moisture gets on the part, causing the same problems. There is also only one solution here - replacing the cable.

When a phone experiences speaker problems, it turns out to be one of the most annoying problems. The phone seems to be working, but I can’t use it for its intended purpose. You simply won't be able to use your device for conversations. For most people in this situation, a phone with a non-working speaker becomes simply unnecessary.

Speaking about this problem, first of all it is necessary to mention that in modern phone There are at least two speakers: one plays melodies, and from the other you hear the voice of your interlocutor during a dialogue. The first is polyphonic, acoustic, music speaker or buzzer, second speaker or auditory speaker.
Certain models may have up to 4 speakers available at once, but their main purpose is to simply amplify sound and improve its sound quality.

When the speaker fails, the phone is of very little use. You won't be able to talk, won't hear the ringtone, won't be able to listen to music, etc.

Unfortunately, it is worth noting that the problem of speaker failure is very common today.

How to understand that there are problems with the speakers on your smartphone?

The volume of the interlocutor's voice changes all the time;
You hear extraneous noise while talking on the phone;
You can't hear your opponent at all;
While the melody is playing, its volume becomes quieter and does not increase;
You may also hear additional noise while music is playing;
There are no sounds at all when there is an incoming call.

Why does one speaker or another fail?

One of the reasons may be software glitch, for example, incorrect update;

Another popular reason is the penetration of liquid or condensation into the speaker through the perforations and mesh of the phone case;

Often, due to clogged speaker holes, you also stop hearing sounds normally;

Possibly due to mechanical damage the phone has lost contact with the speaker, or the speaker has simply failed as a result of the device being dropped;

It often happens that similar problem occurs due to a closed headphone jack, in which case there will be no external sounds, and the interlocutor will be heard through the headphones.

One of the serious troubles can be the failure of microcircuits on system board, responsible for sound, for example, an audio codec or mixer.

The problem may be the easiest to solve if the volume level of the speakers is off. Before taking any other steps active actions, be sure to check this indicator. Also try rebooting your device.

If you are convinced that the audio playback settings are correct, you have rebooted your smartphone, but the problem remains - the most the best option contact the service center.

Independent actions can only harm the phone if you do not have the skills of a service engineer. Diagnostics of phones in our service center is always free. IN as soon as possible We will determine the cause of the malfunction and, with your consent, eliminate it.

Tips that can be given for better work speakers

If you want the speakers in your phone to last as long as possible, you need to follow simple rules for their operation. The most important thing you need to know is that your phone speakers need to be protected as carefully as possible from dirt, dust and other contaminants. Of course, you must not allow water to get inside or cause mechanical damage. It is for these reasons that in most cases problems with phone speakers occur.

Service center employees encounter customers complaining that their phone speaker is not working. The presented article reveals the causes of the malfunction and the most effective options eliminating them. The instructions are suitable for both Android and iOS devices.

If the sound on your phone doesn't work, what should you do? The source of the problem must be determined. Their list is given below.

The audio settings are incorrect.
Installed software, incompatible with the equipment.
The user selected "quiet mode".
Software conflict.
In polyphonic or speaker garbage got in.
The headphone jack is broken.
Moisture got inside.
There is a problem in the hardware of the device.

Regardless of the time when the problem makes itself felt - when making a call, playing music, you will have to carry out in-depth diagnostics.

Regulator failure

A polyphonic or conversational speaker in a phone will refuse to work fully if the owner first reduces the sound to a minimum and breaks the regulator. The solution to the problem is to repair the rocker. It is necessary to disassemble the housing and check the current state of the contacts. If they come loose, the technician solders them again or replaces the module with a new one. The buttons tend to jam, ceasing to function fully; debris has probably gotten inside the mechanism. If a breakdown is detected again, the side adjustment rocker must be replaced.

Note! To make the sound work when the swing is not functioning, it is recommended to use the settings menu. Performance will be restored, but this solution to the problem should be considered as temporary.

Changing the volume in the settings menu

You can try to troubleshoot the problem yourself by restoring the system to factory settings. Just click on the “Settings” icon located in the menu, select the “Volume” option (the name varies depending on current version operating system). A list of available profiles should appear, with separate adjustments for the earpiece and stereo speakers. You can set up playback on headphones.

After checking the volume controls and settings, check to see if the speaker is functioning normally. Has anything changed? We continue checking.

Audio board malfunction

Inside the smartphone there is an audio card that enhances certain frequencies. A breakdown can cause various consequences. Most often the volume will be zero. The sound quality ceases to please the smartphone owner - some frequencies disappear.

Discovering this on your own will be extremely problematic. It is best to find a service center where they will diagnose and perform repairs.

Mechanical damage

After a fall, both the train and sound card. Usually, a damaged connector is completely replaced because the cables suffered from breaks that cannot be repaired or the contacts are covered with small cracks.

The device is not protected from falling into water. First, let it dry for a while, then proceed with the repair.

Speaker malfunction

It is quite possible that the reason is a manufacturing defect. At valid warranty it needs to be repaired or replaced with a similar copy. The component usually breaks due to impact. If you get inside foreign object, which has simultaneously destroyed the protective mesh, it should be replaced completely.

Audio jack problems

One of the reasons may be the failure of the headphone contacts. The smartphone will think that they are connected to the device, so the signal will be sent to the damaged connector pins. You can try to restore your functionality at home. It's simple - clean the connector and try to turn on the music again. Debris buildup can also affect functionality.

Software level failures

Conflicts on software side appear due to the simultaneous use of several applications for mobile phones designed to correct the playback of audio files. If there are really too many of them, you need to do several things: go into the settings, leave only one program responsible for sound, and delete all the others. Next, reboot the smartphone.

Conclusion

Problems can be of different nature. Simple breakdowns can be repaired yourself. If there are problems with the hardware, you will have to use the help of specialists. Using specialized equipment, the source of the problem is quickly checked. Next, it is carried out full recovery. To prevent recurrence similar situation should be set in advance optimal settings through the smartphone menu, use one profile from time to time and clean from dirt.