How to disable sleep in Windows 10. Turning off the screen after deactivating sleep mode. Disabling hibernation using alternative methods via Cmd and programs

Hibernation mode in Windows 10 is an excellent alternative to completely shutting down your computer. Exists great amount users who need to achieve a state where the computer is not completely turned off, but with a reduced level of power consumption. When such a computer wakes up, it resumes normal power supply to the equipment and various peripheral devices and turns on much faster than if it was completely turned off. Essentially, sleep is about keeping the system running, but using minimal electricity. This function is actively used in Windows laptops and tablets, where it is important to preserve battery charge during periods of low activity or complete inactivity.

Do you need sleep mode or is it better to turn it off right away?

Undoubtedly, Windows sleep 10 is a great alternative full completion system operation. Probably, the sleep mode will be useful to all those who are interested in the maximum fast loading system that will reflect the state of activity before the onset of sleep.

It is important to understand how much your computer really needs this mode and whether it has worthy alternatives. Perhaps you would like to read about how to disable this mode, because it provokes various errors and problems in normal operation. work Win 10. You need to understand all this before applying certain settings.

What is the difference between sleep mode and hibernation?

Probably, many users do not understand at first glance how exactly they differ from each other. It is important to understand that in these two modes there are some differences in the way they work: hibernation involves reading and writing to the hard drive, while sleep mode does not by and large, and is not required. If we talk about the time it takes to exit these modes, the clear winner here is sleep mode. Hibernation is ideal for laptops because it saves battery power better than normal sleep mode. For desktop computers, it is better to use sleep mode, since it is the leader in terms of time to exit this mode. This is followed by hibernation. The slowness of the system's recovery from hibernation mode is due to the fact that it is necessary to read information from the slow HHD to load the system state from hidden file hiberfil.sys.

The easiest way to disable sleep mode in Windows 10

One of the most simple methods Disabling sleep mode is a setting via the Settings menu. To activate this system application and then disabling sleep mode, you must do the following simple steps, namely:

• Press the hotkey combination " Win+I" to go to the window " Options».
• Select the item " System", inside which click on the link " Power, sleep mode».
• Further actions boil down to simple editing parameters of the “Sleep” subsection. Disabling this mode is done by setting both system sleep timer settings to “Never.”
• The final touch that will help you forget about sleep mode forever comes down to editing the section “ Additional power options" This section must be edited, since by default the sleep mode is set as the system's response to pressing the " Power", as well as closing the lid of your laptop. At this point, configuration can be considered complete.

If you couldn’t find something in you, then don’t despair. The ability to disable sleep mode is not limited to just editing via " Options"in Windows 10. In Ten, as well as in Seven, the familiar Control Panel remains, through which you can disable this mode.

How to properly turn off your computer's sleep via Control Panel

Users who have recently switched to Windows 7 from Windows 7 will find it more convenient to disable sleep mode through another system utility. This is a well-known Control Panel" Let us describe a brief algorithm of actions.

Firstly, open " Control Panel" To enter it, press the hotkey combination " Win+X» and in the lower left corner of the menu that opens, click on the section of the same name.

Secondly, we pass the view value to " Small icons" and find the tab " Power supply" This is how further settings will be implemented, which will prevent the system from going into the notorious sleep mode.

And fourthly, set the value " Never" In laptops, it is important to modify the values ​​of two parameters, namely: “ Battery operation" And " From the network" To ensure your laptop never falls asleep again, set “ Never» near these two fields.

In the " Change Extra options “It is necessary to modify the laptop’s inactivity time before going to sleep, turn off the wake-up timers, and also set alternative actions for the reaction from the power button and lid.

Designed to save energy and most users actively use it. But sometimes sleep mode can create some inconvenience. As a rule, this is due to the fact that the computer itself goes into sleep mode when the user is not working with it.

If you also encounter a similar problem, then our article should help you. Here you can find out two ways to disable sleep mode in Windows 10.

Disabling sleep mode in Windows 10 through the Settings menu

Perhaps the easiest way to disable sleep mode in Windows 10 is through the Settings menu. To use this method, open the Start menu and go to Settings.

Once the Settings menu opens, go to the System section.

And then to the “Power and Sleep Mode” section.

IN this section You will have access to settings for screen power and sleep mode. In order to disable sleep mode in Windows 10, you need to open the drop-down menus responsible for the time of transition to sleep mode and select the “Never” option.

Disabling sleep mode in Windows 10 through Power Management

You can also disable sleep mode in Windows 10 through Power Management. To do this you need to click right click Click the “Start” button (or use the Windows + X key combination) and select “Power Management” from the menu that appears.

After this, a window with power supply diagrams will open. Here you need to go to the settings of the power plan you are using. If you are using different schemes, then the settings must be repeated for each circuit separately.

Next, a window will open in which you can change the time the screen turns off and enters sleep mode. To completely disable sleep mode in Windows 10, select “Never” and save the settings.

Also in the power settings you can disable sleep mode when you close the laptop lid or press the power button.

Instead of constantly shutting down your PC when you're done using it, you can instead easily go to sleeping Windows mode 10 using a specific button. How to enable sleep mode, how to deactivate it, what difficulties an ordinary user may encounter when interacting with sleep-mode - we are going to provide answers to all the above questions in this instruction.

How to activate sleep-mode in Windows 10?

To put the computer into sleep mode, use the start button “Start”: hold it down and click in the menu that appears right key mouse on the power icon, and after that, select the “Sleep mode” category in the pop-up menu.

As a result of this elementary manipulation, the computer display will go dark, but the PC itself will not be turned off. To return the operating system to working status again, press any button on the keyboard or move the mouse cursor on the screen.

How to disable sleep mode in Windows 10?

To disable sleep-mode, you should, as always, resort to the new Settings menu, available in the Start menu. Instead of this, a more familiar method, you can use the “Win ​​+ I” button combination. In the new menu, select the “System” subcategory, and then select the “Power and Sleep Mode” section.

In the above section of the menu, you can configure the activation of sleep-mode when recharging the laptop both from the network and from the battery.

Additional configuration options can be accessed slightly further down, in the Advanced Power Options category. Here we can configure the functioning of the laptop as a result of closing the lid or pressing the power button. You can learn more about these options in the subsections presented below.

Customizing sleep-mode in the control panel

By getting into the power supply settings menu through the guidance specified in the previous section, or using a more familiar method (this is to open the control panel and stop in the “Power Options” section), you will also get the ability to disable sleep mode in Windows 10 and debug its operation, and more flexible and accurate than in the description of the above methodology.

Near the one you are involved in currently time with the power supply scheme, click the “Configure power supply scheme” control. In the window that will appear in front of you, you will have the right to set the time interval for activating the sleep status both when powered from the network and from the battery. In addition, you will also have the opportunity to complete shutdown sleep by selecting the “Never” option in the context menu.

To gain access to detailed sleep-mode parameters, you should resort to the “Change advanced power settings” control in the lower area active window. In this category you will have the opportunity to configure additional options, providing:

— setting the sleep-mode activation period (if the value is set to “0,” sleep will be completely disabled);

— activation and deactivation of the hybrid sleep-mode (in fact, this is one of the sleep state techniques when information about memory registers is saved to the disk drive in the event that the device’s power is suddenly turned off);

- activation of recovery mode timers after a sleepy state - usually, these settings do not need to be touched at all, not taking into account those situations when you have difficulties with variably turning on the power supply mode to the computer after it has been deactivated (if you have exactly such problems, All timers should definitely be deactivated).

Well, another significant category that you should not bypass to configure Windows 10 sleep mode is the “Power Buttons and Lid” section. Here you have the right to set the default functions of the computer when closing the lid (meaning the laptop lid) and the behavior of the power key (the default value is the “Sleep” option).

If necessary, in the form auxiliary option there is a configuration for deactivating drives if the PC is inactive (in the subsection " HDD"), as well as customization of turning off the device or minimizing the screen brightness (in the “Screen” subsection).

The main difficulties encountered when interacting with sleep-mode

1. Well, Windows 10 sleep mode is deactivated, the display is also turned off, but after a short time interval the screen still turns off and no action occurs. This problem, as a rule, happens to users most often. Open the control panel, then go to the “Design and Personalization” section, “Changing the Screen Saver” subsection.

2. The device does not exit sleep mode– in this case, either a black display is shown, or there is no reaction to button presses, however, the indication itself indicates that the sleep state is activated. The most obvious way to fix this problem is to reinstall standard driver video adapter, Windows installed 10 by default to the personalized one offered by the device manufacturer. For removing outdated version drivers, use the utility Display Driver Uninstaller, and when the uninstallation is complete, download personalized drivers from the manufacturer's website. Attention: if the situation described above occurred on a laptop with an integrated graphics chipset, you will most likely need Final version libraries from the website of the PC manufacturer itself. If the version for “ten” is not here, take a build suitable for Win 7 or Win 8 and install it in compatibility-mode.

3. Power to a desktop computer or laptop is immediately restored after entering a sleep state or turning off the device. This functionality was often observed by our editors on Lenovo devices (however, similar behavior is likely on other trademarks). To resolve the problem described above, deactivate the recovery timers in the additional voltage supply parameters in the control panel (to get there, use the right mouse button at start).

These are all the difficulties that the Windows 10 sleep mode can push a user into. We hope that the sleep state on your PC will continue to work stably and without complaints, and if any manual intervention is needed, you will be able to use it quickly and easily , which is what our instructions will help you with.

Before you learn how to disable sleep mode in Windows 10, you should understand whether the user really does not need it and what alternatives there are. At the end of the article, common problems that arise with sleep patterns in the “ten” are given.

What is hibernation and sleep mode?

Beginners often associate sleep mode with hibernation, which is completely wrong. Hibernation is the state of a computer/laptop when everything stored in it random access memory data is written to special file not the hard drive. It is stored in the root system volume, is called hiberfil.sys and takes up an amount equal to the amount of RAM installed or used in the system.

RAM used means that a PC can have 4 GB of RAM, but with 32-bit Windows 10 installed, the system uses only ~3.25 GB.

During shutdown, all data from volatile memory is written to this file, and the bootloader is notified to start the OS by writing the contents of hiberfil.sys to RAM. The PC turns on in a few seconds, and all open source software retain their state at the time it is turned off.

Windows 10 sleep mode features reduced power consumption. When activated, part of the equipment and peripherals are turned off, and the main components of the computer/laptop begin to operate with minimal power consumption, which is necessary to maintain the “tens” in working condition.

Disable sleep mode through parameters

We’ve sorted out the difference between PC shutdown modes, now we’ll find out how to disable sleep mode in Windows 10.

1. The simplest way to do this, use the functionality of the “Options” menu, called, for example, using the Win+I combination.

2. In the menu, go to the “System” section, where we click on the inscription: “Power, sleep mode.”

In the second subsection, “Sleep,” sleep is configured.

3. At the bottom, click “Advanced power settings” to open a window that allows you to deactivate sleep mode and select the reaction of the “Power” key when pressed while the PC is running or when the laptop lid is closed.

Configuring sleep mode through the Control Panel

This section explains how to disable sleep mode in Windows 10.

There are many ways to open the Control Panel in the top ten, so we won’t dwell on them.

1. Go to the “Power Options” panel applet, where you can fine-tune the transition to sleep mode than the previous method allows.

2. Click “Configure power supply scheme” next to the selected scheme (indicated by an active switch).

When working on a laptop, to disable the function of putting the device into sleep mode, you must select “Never” next to “Operate on battery” and “On network power.”

By clicking “Change advanced settings” you will be able to fine tuning active power supply circuit. The following options are available here:

• indicating the time of PC inactivity before going to sleep;
• enable/disable sleep mode;
• enable wake timers - this setting should be changed if problems arise with spontaneous start systems (timers in this case must be disabled).

The next section directly related to sleep mode is called “Power buttons and cover”. Here you can choose how the computer reacts by pressing the power button and closing the lid of the portable device.

If necessary, deactivation options are also set here hard drive(or disks) when the PC is idle, as well as options for lowering the brightness or turning off the display in the corresponding sections.

Problems with sleep mode functioning

1. Sleep mode is not activated, nor is the display turned off, but the screen spontaneously turns off after a few minutes.

Solution to the problem: in search bar we write “Screensavers”.

Open its parameters and deactivate the display of the screen saver.

2. The PC does not wake up from sleep mode, displays a black screen instead of the lock screen, or does not respond to any buttons.

Usually, similar problem calls the video adapter driver installed by the operating system itself.

The solution to the problem is to remove the video driver offered by Windows 10, for example, using a special Display utilities Driver Uninstaller, and installation software from the official website.

For older devices, especially those with graphics Intel system and Dell driver will have to be downloaded from the laptop support page and installed in compatibility mode with one of the previous versions of Windows.

3. The device turns on instantly after going into sleep state or after turning off.

The situation is typical for Lenovo laptops.

As mentioned earlier, go to the advanced power settings and deactivate the wake-up timers option.

Next, pointing the cursor at the start menu button, right-click and go to the “System” link, in the window that opens, select “Device Manager”, find “Network adapters” in the list that opens, select the one installed on you network adapter and disable wakeup from the network adapter.

4. Many problems arise with the functioning of power circuits on portable devices from Intel after installing the tenth version on them operating system. They are connected with automatic update Management Engine Interface drivers.

Go to Device Manager and roll back the driver to a previous version or uninstall and replace it with previous version, downloaded from the driver archive on the laptop support site.

5. Lowering the brightness without the user's consent is a less common problem, but has been noticed on some laptops.

Sometimes the brightness level is reduced to 0% in order to save battery power.

If you are looking for a solution to exit similar situation, go to your device's advanced power options. In the Section called “Screen”, specify the display brightness level that it should be in case of automatic reduction. This is done in the “Screen brightness level...” section.

This concludes our study of sleep mode for Windows 10. Please ask all questions using the form below.

Frequently restarting your computer can lead to damage to hard disk. If you have to be away from your computer for a long time, it is better to put Windows into sleep mode. This will help save energy and start the system faster.

During sleep mode, all programs remain turned on, and information about the operation of the PC is stored in RAM. The screen goes blank, the hard drives stop, but the coolers and RAM work.

To exit sleep mode, simply move the mouse or press any key on the keyboard. Returning the computer to working condition It will only take a couple of seconds. Interestingly, Windows 10 allows you to customize many sleep settings.

How to set up sleep mode in Windows 10?

To customize your sleep mode according to your own preferences, you need to follow these steps:

1. Click the Start button and select Settings.
2. In the settings, click the very first item “System”.
3. In System Settings, select "Power and Sleep".
4. Set the time after which the computer should go into sleep mode. If you want the PC to be in working mode while you are away, select “Never”.

Sleep mode is convenient if you are away from your computer for a while. For longer absences, it is better to use hibernation mode. When the PC is in sleep state, information about all open files, folders and programs are saved in RAM, but a power outage will result in data loss. If you select hibernation mode, then information about running programs will be saved in the hiberfil.sys file, which is located in the system directory. The computer can be turned off and on, and the work session will be completely preserved.

Sleep mode and hibernation – useful options for those who simultaneously work with big amount programs and files. Hibernation is suitable for laptop owners, since in this state almost no battery power is consumed. Sleep mode will be excellent choice for stationary PCs, the system will quickly “wake up” and allow you to immediately start working. Exit from hibernation desktop computers takes some time because Windows needs to read information from the hiberfil.sys file.

Why does the computer wake up from sleep mode on its own?

Sometimes users may observe that a PC on which no one is working has come out of sleep on its own. This happens because some utilities built into Windows start the hard drive to carry out service operations.

You can disable the launch of any system components during sleep mode as follows:

1. Go to the menu item “Power and Sleep Mode”;
2. Click on the inscription “Setting up the power supply scheme”;
3. Select "Change advanced power settings";
4. Expand the Sleep category and then the Allow Wake Timers subcategory;
5. Disable them and confirm your action by clicking the “Apply” button.

Now you can not only independently configure the sleep mode in Windows 10, but you will also be sure that during your absence the system will completely preserve your work session in an unchanged state.