Digital satellite receiver gs 8300n. Equipment for digital television is what you can buy in our store
Model 2011.
Digital satellite receiver GS-8300N designed for reception from the Tricolor TV satellite (Eutelsat W7, 36.0°E). Allows you to view the "Super Optimum" package, which is about 100 television channels. In the satellite receiver GS-8300N, use a high-speed processor “STi5119” with a frequency of 200 MHz.
The processor speeds up the execution of functions:
fast satellite scan
quick search for TV channels Tricolor TV
Fast execution of remote control commands
Specifications of GS-8300N
Signal support: MPEG-2/ MPEG-4
Memory for at least 4000 television and radio programs
Options for organizing the channel list: All, Favorite
Favorite groups: 5 to max. 40 channels
Supported channel search types: Network, full, manual
Work in standards: PAL/SECAM
Digital optical audio output: S/PDIF
GUI: 256 colors
Video decoder: MPEG-2 video stream, MP@ML (ISO/IEC 13818), H.264 [email protected](IEC 14496-10)
BISS descrambling: Mode 1 (at least 7 keys)
Control external devices: DiSEqC 1.0, 1.1,1.2, USALS
Menu languages: At least 5 languages – Russian, English, French, German, Spanish
Support additional services: TV Mail, TV Chat, InfoCAS
Russian cultural news today on satellite TV and the Internet
|
TV shows on satellite TV
|
Microsatellites of the Russian Federation
|
Operation of the fourth cosmodrome of the People's Republic of China
|
We are often asked how to watch football online? After all, through Satellite Internet It’s not always possible, since not all sites relay pay television online. It’s not always possible via satellite TV either, for example, it happens bad signal, and it’s a little expensive. But there is a solution. |
On July 31, 2017, changes were made in broadcasting aimed at dividing regional TV channels into appropriate lists and designed to make viewing these TV channels more convenient.
To correctly display the list of TV channels, follow these steps:
1. Press the "Menu" button and select "Settings".
2. Select Factory Reset and click OK.
3. Confirm resetting the receiver to factory settings by first pressing the red “F1” or “Info” button on the remote control, and then selecting the “Yes” option.
4. After this, the receiver will reboot. Wait until a message appears on the screen as in the figure below and press the receiver power button (Standby).
5. Select the languages of the receiver menu and audio, then click the “Next” button.
6. Select the operator “Tricolor TV” and click the “Next” button.
8. On automatic search make sure that the Tricolor TV antenna is installed (if standard connection receiver to the antenna, it is recommended to leave the default settings), and click “Next”.
9. Select the region that suits you. There will be 3 regions available for selection - “Main”, “Moscow +0 hours.” and “Moscow +2 hours.”
Attention! You must select one of two regions - “Moscow +0 hours.” or “Moscow +2 hours.” - depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some TV channels will be broadcast with a time shift of +2 hours from Moscow time.
When you select the “Main” region, one information channel will be saved in the channel list.
10. Wait until the search for TV channels is completed and save the found TV channels.
23.10.15, 10:08 Tricolor 6
Tricolor 8300 M, N and DRS 8300 modules are one of the most common display devices satellite TV channels. As with any equipment using software, satellite receiver needs to be updated. This is done to improve quality and correct errors.
On May 14, 2015, the latest firmware for the 8300 series modules appeared, which includes:
- GS 8300 n
- GS 8300 m
- DRS 8300
It is for these digital satellite receivers A manual for updating the firmware is presented.
Before updating the software
Firmware dated May 14, 2015 will be installed if the receiver properties display next versions Software and modules:
- For GS 8300 M and GS 8300 N these are 2.364 and 0.8.53
- For DRS 8300 these are 1.2.364 and 0.8.53
They can be viewed by pressing “Menu” on the remote control and going to the “Status” tab
When changing the firmware using a PC, keep in mind that the software is updated first, and then the receiver module.
Update via satellite connection
- Unplug the receiver.
- Go to the Tricolor TV info channel (button 0 on the remote control)
- After a few seconds, a message will appear informing you that an update is required. software
- Click the “Yes” button
- will appear on the screen service messages. Under no circumstances turn off the equipment while the process is in progress, otherwise the receiver may fail.
- Time until complete installation new software will take about 5 minutes.
- Having completed necessary actions, the receiver will automatically reboot and you will need to configure it again.
Update via computer
If for some reason you are unable to update via satellite broadcast, we suggest you try changing the firmware to a newer one using a flash drive and a personal computer.
What you need to prepare before upgrading
- PC – personal computer
- SD card
- RS-232 cable
- Download the firmware dated May 14, 2015 from the official website, it is located at http://gs.ru/support/manuals-and-software/gs-8300/20150327_GS8300X_hw0427_hw0437_DRS8300_hw0449_coderes_RS232_1_2_424.rar
Receiver firmware via computer (8300 M, N and DRS 8300)
- Turn off the computer and receiver from the network
- Use an RS-232 cable to connect the receiver and system unit computer
- Download the GS Burner program to your PC (http://general-satellite.ru/production/Setup.exe) and install it.
- Unzip the firmware files. Launch the GS Burner program and open the file 20150327_GS8300X_hw0427_hw0437_DRS8300_hw0449_coderes_RS
- Click the Upload button
- Turn on the receiver
The front panel of the receiver will display the update progress. Do not under any circumstances disconnect one of the devices from the network. This may cause inoperability satellite equipment. When completed, the receiver will automatically reboot, after which you need to configure it again.
Preparing an SD card for updating module software
After making sure that the software version is correct, take an SD card (recommended class 6, the ones tested are Kingston and Transcend) Insert it into the receiver. A prompt will appear on the screen to format the flash drive. We agree by clicking the “YES” button
We insert the formatted card into the computer and copy the update.otm file to it
Receiver module software update
- Turn off the set-top box
- Insert the flash drive with the recorded otm file into the switched off receiver
- We turn on the receiver and wait. It will start in a minute automatic update module. The update stages will be displayed on the display, there will be 6 of them.
- When all module update stages for GS 8300 n, GS 8300 m and DRS 8300 are completed (100%), remove the SD card and reboot the receiver
On July 31, 2017, changes were made in broadcasting aimed at dividing regional TV channels into appropriate lists and designed to make viewing these TV channels more convenient.
To correctly display the list of TV channels, follow these steps:
1. Press the "Menu" button and select "Settings".
2. Select Factory Reset and click OK.
3. Confirm resetting the receiver to factory settings by first pressing the red “F1” or “Info” button on the remote control, and then selecting the “Yes” option.
4. After this, the receiver will reboot. Wait until a message appears on the screen as in the figure below and press the receiver power button (Standby).
5. Select the languages of the receiver menu and audio, then click the “Next” button.
6. Select the operator “Tricolor TV” and click the “Next” button.
8. During automatic search, make sure that the “Tricolor TV” antenna is installed (with a standard connection of the receiver to the antenna, it is recommended to leave the default settings), and click “Next”.
9. Select the region that suits you. There will be 3 regions available for selection - “Main”, “Moscow +0 hours.” and “Moscow +2 hours.”
Attention! You must select one of two regions - “Moscow +0 hours.” or “Moscow +2 hours.” - depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some TV channels will be broadcast with a time shift of +2 hours from Moscow time.
When you select the “Main” region, one information channel will be saved in the channel list.
10. Wait until the search for TV channels is completed and save the found TV channels.
Equipment for digital television- this is what you can buy in our store. Our company has been operating in the market of broadcast and satellite equipment since 2003 and we already know most of our clients by sight.
For regular customers of our online store there is a system of discounts, which are calculated automatically according to the coupon number assigned to you personally.
All equipment passes pre-sale preparation, namely, it is installed latest version Software for satellite and broadcast consoles. All receivers are tested for functionality.
Our company delivers equipment both in Moscow and throughout Russia. With most companies courier delivery Agreements have been concluded on preferential delivery prices.
In our online store you can find almost any equipment that you may need to receive satellite and terrestrial television. We tried to do convenient process placing an order for anyone If you plan to order not one item, but several, then you can use the store search and pay attention to the accompanying equipment. If you want to select equipment for receiving satellite TV, then you should go to the “Satellite TV” menu tab , if for receiving terrestrial or cable TV, then " Terrestrial television" etc. If you have questions during the ordering process, you can use online chat, which is located on every page of the online store or order back call.
We hope that in the online digital TV store you can spend a minimum amount of time ordering the required equipment.