What to do if the phone does not see the headphones. Why doesn't my phone recognize my headphones? Wireless headphones do not connect to the phone because Bluetooth is disabled on the phone

There are quite a few reasons why the phone does not recognize the headphones. The problem may lie in an incorrectly selected Bluetooth protocol (bluetooth), a technically faulty connector, a phone firmware failure, or a completely different design. Synchronization problems can sometimes be fixed on your own, but first you need to simple diagnostics and establish where the breakdown is hidden.

Initially, the user wants to understand what to do next if the phone does not see the headset or headphones. You need to figure out which device to look for the problem in: headphones or phone. This must be done even if you plan to see a specialist later.

Carrying out diagnostics at the initial stage is quite simple.

Connect potentially faulty headphones to any other device: player, computer, TV. If they function, then the problem is with the phone.
Install other headphones into your mobile phone and check. If the accessory works in normal mode Therefore, the socket and contacts of the phone connector are working properly.
If you have Bluetooth headphones, try connecting them to another Bluetooth device and see if pairing or discovery occurs.

Connecting headphones to the player

Device Compatibility

Among other reasons not related to software, we can highlight the problem of incompatibility of the accessory with gadgets. Technically headphone jack can be different:

Mono connector with two contacts;
three-pin stereo jack;
stereo headset jack with four pins.

The phone does not see an incorrectly selected accessory, but such situations are rare. Usually, modern technology has maximum potential, that is, it has 4 contacts with the ability to connect a headset.

There are designs where the contacts are “swapped”, which will also lead to the phone not seeing the headphones. It's simple here: many companies develop things like headphones, microphones or headsets exclusively for their products. This is economically beneficial, because the user will buy more products of the same brand, albeit forced.

iPhone 7 and Lightning headphones

Average companies, due to competition, do not take such measures; this is rather a privilege of the leading manufacturers in their industry.

Second point - goods low/unstable quality, as a rule, these are cheap Chinese (sometimes Taiwanese) headphones without a specific trademark. If a company does not monitor production and uses foreign technologies, then as a result the user receives products with unpredictable technical characteristics. In both this and the previous case, the accessory will work properly.

Technical problems with headphones

One of the most common problems is broken wire to one of the headphones. We can say that a protective function is triggered here, and the phone stops seeing the headphones or playing sound. You can fix the problem after visual inspection, but a hidden fracture can only be determined using devices that work on the principle of a multimeter.

Damaged headphone wire

Before breakdowns of this kind, there may be incorrect work one of the headphones:

extraneous noises, wheezing;
periodic loss of sound.

If you move the wires along their entire length, a sound may appear, which will indicate the location of the fracture. Repair in this case will be simple: open the insulation, restore the wiring, secure it with electrical tape or heat shrink.

The second most popular problem is plug contamination. It needs to be inspected and cleaned, then reconnect the headphones to the phone.

A headset or headphones, like any small equipment, can fail. In this case, the accessory will not function in any other devices. Naturally, connecting them to the phone several times is pointless; it will not recognize them.

Technical problems with your phone

If the diagnostics have determined that the headphones are working, but they cannot connect to the gadget, we look for a problem in the phone. Here is the weakest point - socket where the jack is inserted. Over time, it may become dirty; a more complex breakdown will be a broken wire. If excess debris and dust are easy to remove, then to restore contact you need to open the phone.

It is important to know! Warranty service is canceled if the device was opened without permission or in a third-party workshop. The best option– hand over the phone to an authorized service.

In order to check the wires, you need to turn off the phone, remove the SIM cards, battery and all memory cards. Next, unscrew all the screws and use a flat screwdriver to pry off the plastic cover. If the socket is broken, it must be replaced. It is worth noting that an inexperienced technician can easily damage other components of fragile electronics, as a result of which repairs will become several times more expensive. It is not recommended to resort to self-repair, if possible, contact a specialist who will take responsibility.

Other problems include oxidation of the connector wires or short circuits. In the most difficult situations, the cause is a breakdown of the phone board.

Problems with wireless headphones

Modern and popular wireless accessories are convenient, but they are the ones that many users have the most difficulty with. They are connected using built-in Bluetooth modules.

First of all, you need to check again whether the module is activated, as well as the time it was active. Some wireless headphones or headsets may not connect to others after pairing with one device. You can start the operating mode by holding the power button for 5 - 10 seconds, after which the device will give a light signal. Next, synchronization should occur in automatic mode, but may need to be done manually. Sometimes, after holding down the power button, Bluetooth headphones may ask sync code, the default factory password is 0000.

It is important to know! Be sure to check the battery level. When discharged, the headset will not turn on, therefore, the phone will not be able to recognize them.

The second “software” problem, why the phone does not see the headphones, is outdated version firmware. This can happen regardless of the operating system, be it Android or iOS. You can update it in a workshop or yourself. If you do not have experience, it is better to trust a specialist.

Modern tablet through various peripheral devices can turn into a multimedia center. For this, wired or wired headphones can be used. wireless types. However, many users may experience that the headset does not work correctly. If the tablet does not see the headphones, you can try to solve the problem yourself using tips and good advice specialists and advanced users.

The tablet does not see the headphones: the main reasons

Most often, this problem is encountered by owners whose tablet computers:

They do not support the device you are using, and therefore there is no way to synchronize. This means that the user has no chance to listen to music or a video clip or watch a movie in silence.
The headphone jack is faulty or the socket being used is damaged. Latest from frequent use It might just get loose.

How to find out the reason?

To complete the task, you must perform a number of actions:

Connect the headset to another device. It could be another tablet, laptop, cell phone, player. If sound appears, the reason lies in the tablet itself.
It is recommended to connect other headphones to check the functionality of the tablet itself. If they do not work, then the cause may be a loose socket.

Checking the connector's serviceability

This procedure is only suitable for those tablet computers, which have already been removed from warranty service. To check the quality of the connector, you should arm yourself with a screwdriver and:

Carefully remove the device cover by unscrewing all nuts and screws.
The battery and SIM card, if any, are removed.
The search for a breakdown is carried out at the connector itself. This may be mechanical damage, as a result of which the contact has come off.

If all contacts are intact and the connector is loose in the socket, you need to reinstall the battery and SIM card, and then replace the case cover. It is quite possible that the reason lies in the settings being lost. To fix this, you should reset them to the factory state and perform a software update. If the above actions do not have any result, you must take the device to a service technician for inspection.

Often, after purchasing a new gadget, users wonder why the phone does not see the headphones. There may be several reasons for this, ranging from device incompatibility to mechanical damage to the special mini-jack connector. In order to accurately determine the problem, you need to diagnose it yourself, otherwise you will have to take the equipment for repair and pay a lot of money for the simplest manipulations.

Modern gadgets are equipped with mini-jack (3.5 mm) and micro-jack (2.5 mm) connectors. But increasingly, manufacturers are moving away from mechanical innovations, switching to wireless technologies. This makes life a little easier for music lovers.

On this moment There are several varieties of miniature speakers: two-pin mono, three-pin and four-pin stereo. All of them differ from each other in their sound features, characteristics and component parts, but diagnostics in all cases is carried out the same way.

If the headphones on your phone do not work, several factors may contribute to this:

Smartphone malfunction,
Headset failure,
The extension cord was found to be defective or broken
Software problems.

If the headphone jack does not work, you should contact a workshop for repair; repairing the part yourself will be problematic.

Using diagnostics, you can determine why the headphones do not fit the phone. Here you need to make sure that the mini-jack plug is fully inserted into the port, press the volume button and visually check the cleanliness of the connector. If after this there is no sound, you should proceed to a detailed check of the devices.

Simple diagnostic methods

First of all, you should find out which device is causing the problem.

Just connect another headset to your smartphone and turn on the music. If playback starts, then the problem is not there.

If the device does not accept another headset and songs are not played, the fault is with the board or other internal systems.

Compatibility check

Now manufacturers produce universal headset models for Android smartphones, and separately for iPhones, so the likelihood of device incompatibility is negligible. If the headphones do not fit, the owner will be notified via a system notification. Arrange additional checks not required, this is done automatically by the built-in software.

Signs of a headphone problem

To check their functionality, just connect them to another device: a portable speaker, radio or another smartphone. If they are found not to work, this indicates that they are faulty.

The following breakdowns are typical for headsets:

The mini-jack plug is clogged,
Damage (break) of the wire,
Moisture entering a miniature speaker, followed by oxidation of the contacts.

To clean the plug, alcohol is used: just moisten a cotton pad with it and wipe the part. The same method is also suitable for cleaning the socket in a smartphone, but here you must be careful not to damage the contacts.

In addition to the problem when the headphone jack on the phone does not work, the microphone may also malfunction. In the normal state, when a headset is connected, it transmits the voice to the interlocutor, and the built-in one in the smartphone is turned off. If this does not happen, but the music is played, the reason lies in the unsuitability of the wire leading to the part.

Symptoms of phone problems

One of the reasons is the breakdown of the gadget itself. If the sound is heard through the speakers, but when you connect a headset it stops playing and the device does not see it, this may be caused by a number of problems:

Mechanical damage to the input or loop.
Short circuit.
The connector is clogged or the contacts are oxidized, resulting in changes in electrical resistance and the system does not see the new device.

If the cable or port malfunctions, you will have to contact a workshop to replace it. If deposits are found on the contacts or connector, you can clean them yourself with alcohol.

The phone does not recognize wireless headphones

Bluetooth headphones can be used on smartphones, computers, laptops and any other gadgets. They operate on batteries and require periodic recharging, which is something you need to pay attention to when determining why wireless headset does not connect to the phone. If the battery is low, the indicator will notify you of this, and you will have to connect the charger.

There are other reasons why a Bluetooth headset may not work:

Problems with the driver: they need to be reinstalled or rolled back if new software was installed.
Incorrect settings.
Incorrect parameters in the BIOS (applies only to computer equipment).

In the last two cases, you should familiarize yourself with the settings for your specific Windows series, and if there are any inaccuracies, enter the correct value in the special fields.

To avoid problems after purchasing a Bluetooth headset or headphones, you need to follow several rules:

Conclusion

Knowing how to fix the problem when the headphone jack on your phone does not work, you can quickly restore the functionality of the device. And again enjoy your favorite music or conversations without using your hands, because having a headset greatly simplifies the life of every person. Most often the headset has a 3.5 mm jack. mini-jack stops working due to mechanical damage or exposure to snow and/or water. Therefore, you need to treat it as carefully as possible so that the wires and contacts do not break.

So, the phone does not see the bluetooth headset. IN in this case The brand of the headset or phone is not important. Standard bluetooth connection is universal and if problems arise with the visibility of devices, there can be only three reasons for the problem.

Bluetooth is not enabled on your phone/tablet

This is the first thing to check in such a situation. Go to your phone settings and make sure Bluetooth is activated and the device visibility time is set correctly.

Visibility time is set to additional settings. IN selected models phones they are called “Device Visibility Time”, and somewhere “Detection Timeout”. It is best to check the "Do not use timeout" option. If, after changing the settings, the Bluetooth headset still does not connect, check two more options.

The headset is not turned on or is discharged

In some headsets, the power button must be held for at least five seconds to start operating mode. When the device starts working, the indicator light will begin to blink. After this, you don't need to do anything. All modern Bluetooth headphones connect to the phone automatically.

If you press the button long enough and there is no response, the headset is either discharged or faulty. Please note that even a new Bluetooth headset may have an empty battery. Batteries lose charge if left unused for a long time. When charging does not help and the new headset does not turn on, you need to change it from the seller.

The headset has already been paired with another device

Sometimes a Bluetooth headset, which has already been tested many times with another gadget, does not connect to a new phone. The fact is that the headset is automatically connected to the first device, and then the pairing function is disabled. To reactivate it, you need to hold the power button until the indicator lights up. A window will appear on your phone to enter the pairing code. The factory code adopted by manufacturing companies is 0000, four zeros.

These are the main reasons why the phone does not see the Bluetooth headset. Due to the fact that such accessories do not have complex settings, there are no other reasons for malfunctions.

How to connect a bluetooth headset to your phone

Let's look at connecting a Bluetooth headset using Partner accessories as an example.
The instructions are simple:

Press the power button and wait for the light signal.
Turn on Bluetooth on your phone and search for the “Partner BT” device in the search.
Connect and use.

A Bluetooth headset is an indispensable thing for people who spend a lot of time communicating on an Android phone. It allows you to leave your hands free without looking up from the call, and is especially useful for motorists who are constantly on the move or simply to make communication more comfortable.

The headset allows users to always stay connected

Many of us, when buying a hands-free accessory, do not know how to connect a Bluetooth headset to the phone. In fact, this is done quite simply, so let's find out how to establish a connection quickly and independently.

Connecting a headset

How to set up a Bluetooth headset on Android or devices of other brands? Before connecting it, make sure that your smartphone has a Bluetooth function - in principle, any modern gadget. It is also advisable that both devices be charged so that the Bluetooth connection process will not be interrupted if the phone or headset is discharged.

So, pairing a phone on the Android platform or with any other system and a Bluetooth headset occurs as follows:

Turn on the hands-free accessory, activate Bluetooth function on the phone - you will find it in Settings, regardless of the manufacturer or system on the gadget;
Now on the Bluetooth headset you should find function key, which will put it into pairing mode. In most cases, you need to hold down the main key and hold it for a few seconds. If the LED begins to blink in different colors after turning on and holding down the button, it means that it has entered pairing mode;

Note! Often, if you just bought a Bluetooth headset and have not previously used it for connection, you don’t have to put it into pairing state, but simply turn it on - the first time it is automatically configured in this mode. However, if you were unable to pair it with your Android phone in this way, use the above recommendation.

Why doesn't my phone recognize my Bluetooth headset? Questions like this come up quite often. The fact is that wireless headsets have been in great demand for many years. After all, it is very convenient, especially for drivers. Moreover, the rules traffic It is forbidden to talk on a mobile phone while driving vehicle. This is exactly what wireless headphones are used for. We wrote about how to listen to music via a Bluetooth headset. But despite this, many users do not know how to use it.

To do this, you need to know some features and rules of application. Moreover, first you need to pair your devices. In other words, add wireless equipment to the list of connections on your smartphone. At the same time, in order to avoid certain inconveniences, after you have synchronized the devices, the headset will no longer be detected by other mobile phones. If you don’t know How to use a wireless Bluetooth headset, read on.

There may be several reasons for this:

The headset is simply not turned on.
The synchronization function is not enabled.
Battery low.

As you can see, there are not many reasons why the phone does not see the Bluetooth headset. And they all lie in connected equipment. The fact is that on mobile devices (tablets, smartphones, etc.) there are practically no settings. You can only turn the Bluetooth adapter on or off and activate the discovery function.

What to do if your phone doesn’t see your Bluetooth headset: Video

How to connect a wireless headset

So, before moving on to the question of why the phone does not find the Bluetooth headset, you should figure out how to synchronize and connect. Typically, when you turn on the headphones for the first time, they will automatically activate the detection function. That is, for example, a smartphone or tablet can easily find new equipment available for connection.

But, if the headphones were previously paired with another smartphone, the pairing function on them is disabled. In such a case, you need to press and hold the Power button for about 10-15 seconds.

There can be no other reasons, since there are no settings. Moreover, all Bluetooth devices operate on the same frequency range, so there are no divisions by manufacturer brand. If you have a tablet, it may be useful to you.

How to connect Bluetooth headphones to a computer: Video

It can happen to every phone or smartphone that the device stops recognizing the headphones. It should be noted that this problem Replacing the headset does not always solve the problem. Our article will discuss exactly this: what to do if the phone “does not see” the headphones, and how to eliminate this unpleasant situation.

How to fix the problem

The first step is to connect and test the headset on your computer or laptop. If they work there, then it's a phone issue. Let's try to figure this out.

When deciding what to do if the phone “does not see” the headphones, it is worth considering that this accessory with a 3.5 mm jack are divided into 3 types:

Mono with 2 contacts.
Stereo, with three contacts.
Stereo with headset (4 contacts).

And it happens that some devices, including smartphones, cannot recognize a three-pin headset.

So what to do if the phone “does not see” the headphones? You need to make sure that they are inserted correctly and completely into the phone, check that the connector is clean, or increase the sound volume. If all standard procedures did not help, then you will have to reset the factory settings and format the smartphone.

What to do if the phone “does not see” the headphones even after this? Only a specialist can resolve this situation. The wizard will replace either the firmware with more modern version, or the connector channel where they are inserted.

Why doesn't the phone "see" some headphones? As mentioned above, the cause may be an unsuitable contact phase. And if this audio accessory does not work when connected to a phone, taking into account all the stated methods for solving the problem, then the problem lies in the manufacturer or brand. A headset from a certain manufacturer may not fit a certain brand of phone. They are simply not able to “get their act together.”

How to choose good headphones for your phone

Modern man does not imagine his daily life without music. To keep her close at all times, you need headphones. They should be compact and not cause inconvenience to their owner. And most importantly, they value high-quality sound.

The modern acoustics market offers hundreds and even thousands of headset options. Good headphones for your phone should be chosen just for you. According to your individual characteristics. For example, a person who runs and exercises will not take them with ears that are too large. A fan of playing computer games prefers headphones with a microphone, etc.

In any case, all phones are sold with a corresponding set of accessories. If they do not suit the buyer, he can replace them with more suitable ones. It all depends on the financial status of the music lover. Well-known, or so-called branded, headphones usually cost from 5 thousand Russian rubles. But it’s no secret that there are some for 50 thousand or even more.

Main characteristics and advantages of headphones “from five thousand and above”

The operating frequency range of high-quality and expensive headsets can reach up to 30,000 Hz! This means only one thing: the owner of such “ears” will receive sound excellent quality. They also stand out for their strong bass and cool design appearance, which will celebrate the creativity and style of its owner.

But in pursuit of the popularity of the model, the buyer in some cases does not pay attention to the cable. Depending on the model, it may be too thin and will easily get tangled, or rough and inconvenient, which is why, for example, it will not fit into your pocket at the right time. So the cable largely determines the durability of the entire headset.

Alternative ways to connect headphones to your phone

In order to connect headphones to a phone or smartphone, you do not need much knowledge in the field of advanced technology. let's consider alternative ways Headphone connections:

Connection In this case, the situation is very simple: turn on Bluetooth on your phone and click on search for Bluetooth devices. Don't forget to turn on your Bluetooth headphones! After the phone finds the headphones, you can start listening to music.
Connecting USB headphones. The second option for how to connect headphones to your phone will suit the most advanced users, since you will definitely need a USB adapter. Only through it can a connection be made. Another unpleasant aspect of this type of connection is that almost all USB headphones require the installation of additional software.

There are quite a few reasons why the phone does not recognize the headphones. The problem may lie in an incorrectly selected Bluetooth protocol (bluetooth), a technically faulty connector, a phone firmware failure, or a completely different design. Problems with synchronization can sometimes be fixed on your own, but first you need to carry out simple diagnostics and determine where the problem lies.

Device diagnostics

Carrying out diagnostics at the initial stage is quite simple.

Connect potentially faulty headphones to any other device: player, computer, TV. If they function, then the problem is with the phone.
Install other headphones into your mobile phone and check. If the accessory works normally, then the socket and contacts of the phone connector are working properly.
If you have Bluetooth headphones, try connecting them to another Bluetooth device and see if pairing or discovery occurs.

Connecting headphones to the player

Device Compatibility

Among other reasons not related to software, one can highlight the problem of incompatibility of the accessory with gadgets. Technically headphone jack can be different:

Mono connector with two contacts;
three-pin stereo jack;
stereo headset jack with four pins.

The phone does not see an incorrectly selected accessory, but such situations are rare. As a rule, modern technology has maximum potential, that is, it has 4 contacts with the ability to connect a headset.

iPhone 7 and Lightning headphones

Average companies, due to competition, do not take such measures; this is rather a privilege of the leading manufacturers in their industry.

Second point - goods low/unstable quality As a rule, these are cheap Chinese (sometimes Taiwanese) headphones without a specific brand. If a company does not monitor production and uses foreign technologies, then as a result the user receives products with unpredictable technical characteristics. In both this and the previous case, the accessory will work properly.

Technical problems with headphones

One of the most common problems is broken wire to one of the headphones. We can say that a protective function is triggered here, and the phone stops seeing the headphones or playing sound. The problem can be determined after a visual inspection, but a hidden fracture can only be determined using devices that operate on the principle of a multimeter.

Damaged headphone wire

Before breakdowns of this kind, one of the headphones may not work correctly:

extraneous noises, wheezing;
periodic loss of sound.

The second most popular problem is plug contamination. It needs to be inspected and cleaned, then reconnect the headphones to the phone.

Technical problems with your phone

It is important to know! Warranty service is void if the device is opened without permission or by a third party. The best option is to take your phone to an authorized service.

In order to check the wires, you need to turn off the phone, remove the SIM cards, battery and all memory cards. Next, unscrew all the screws and use a flat screwdriver to pry off the plastic cover. If the socket is broken, it must be replaced. It is worth noting that an inexperienced technician can easily damage other components of fragile electronics, as a result of which repairs will become several times more expensive. It is not recommended to resort to independent repairs if it is possible to contact a specialist who will take responsibility.

Other problems include oxidation of the connector wires or short circuits. In the most difficult situations, the cause is a breakdown of the phone board.

Problems with wireless headphones

Modern and popular wireless accessories are convenient, but they are the ones that many users have the most difficulty with. They are connected using built-in Bluetooth modules.

First of all, you need to check again whether the module is activated, as well as the time it was active. Some wireless headphones or headsets may not connect to others after pairing with one device. You can start the operating mode by holding the power button for 5 - 10 seconds, after which the device will give a light signal. Next, synchronization should occur automatically, but it may need to be done manually. Sometimes, after holding down the power button, Bluetooth headphones may ask sync code, the default factory password is 0000.

It is important to know! Be sure to check the battery level. When discharged, the headset will not turn on, therefore, the phone will not be able to recognize them.

The second “software” problem, why the phone does not see the headphones, is outdated firmware version. This can happen regardless of the operating system, be it Android or iOS. You can update it in a workshop or yourself. If you do not have experience, it is better to trust a specialist.

You are not immune from such a case when the headphones suddenly refuse to work together with mobile gadget. It must be said that the way out of this situation is not always associated with buying a new headset. There is a fairly substantial list of reasons why a device stops recognizing an audio headset or Bluetooth headphones.

Incorrectly selected bluetooth protocol, a technical malfunction of the connector, glitches in the smartphone’s firmware - this is just a small list of what can lead to this problem. Fixing a synchronization problem will not be difficult without qualified assistance, but first of all you need to carry out basic diagnostics and identify the real reason breakdowns.

Device diagnostics

Faced with similar problem, the first thought that comes to mind is to decide what steps to take due to the fact that the smartphone does not see. You need to understand which device caused the failure: headphones or phone. It is best to clarify this point before contacting service center.

Simple steps, which will help to carry out initial diagnostics:

Check the serviceability of the headphones by connecting them to some device that has the appropriate connector, for example, to a laptop or player. If heard sound signal, which means the problem lies in the smartphone.
Another headset is connected to the mobile phone. If the headphones function smoothly, we can say with confidence that there is no damage to the socket or contacts of the phone connector.
If problems arise with a Bluetooth headset, it makes sense to try connecting it to another Bluetooth device and check whether pairing or detection occurs.

Checking devices for compatibility

Audio plugs differ in the wiring standard. The two main types are OMTP And CTIA. All of them, without exception, are equipped with three main contacts. The headset has four contacts. Statistics show that most often a four-pin headset breaks. This is explained by the fact that the GND pin on the outdated pinout was closest to the wire. After it came the microphone, the right earphone and the left channel.

New type pinout (CTIA) implies that the microphone is in front of GND. Therefore, if you are using an old headset on a new gadget, then it will definitely not work. Eg, Sony Xperia The Z1 will not detect headphones made using the old OMTP standard. The smartphone is only compatible with latest models headphones, preferably Sony brands.

Identifying technical problems with headphones

The ranking of the most common causes of headset malfunctions is headed by wire damage, leading to either the right or left earbud. A broken wire creates a sort of protective barrier and the phone refuses to detect the headphones or transmit an audio signal.

An obvious wire break is visible naked eye, but a hidden problem can only be determined using a special multimeter.

Violation of the integrity of the wire is indicated by:

Hissing and wheezing in one or two headphones at once.
Systematic interruption of sound.

Sometimes, by moving the wire along its entire length, you can find that sound has appeared. In this way, the area of possible fracture is determined. The repair procedure in this case will be quite simple: open the insulating layer, restore the wiring, secure it with electrical tape or heat shrink. An equally common problem is dirt getting on the plug. It is inspected and cleaned, after which the headset is reconnected to mobile device.

Troubleshooting technical problems with your phone

If, as a result of diagnostics, it was determined that the headset is working, but is not detected by the gadget, you should look for a problem in the phone itself. The most weak point is the connector where the plug is inserted. Over time, he usually gets dirty. Get rid of excess garbage and dust is easy, but to restore contacts, you will need to open the phone.

Before checking the wires, turn off the device, remove the SIM card, battery and memory card. After this, you can begin to unscrew the screws on the back panel. A broken socket should be replaced with a new one.

The owner of an expensive smartphone must be extremely careful not to damage the fragile electronics with a screwdriver. Without confidence in own strength You should not try to fix the problem, because often due to the mistakes of an inexperienced technician, the cost of repairs increases significantly.

Why won't my phone connect to my Bluetooth headset?

What should I do if the headset doesn't work? In such a situation, it does not matter what brand of manufacturer the Bluetooth device or smartphone is. The standard of this wireless personal network is universal, therefore, if the gadget does not want to see the headset, you can get it working by checking three things. This is the main thing to do in this situation.