iPhone 5 is frozen and not responding. Turn off iPhone using Assistive Touch. Visual effects enabled on old device

There is a function Assistive Touch - so reboot the gadget with broken key « Power"Simply enough. However, if the sensor fails, turning off the iPhone is more difficult: you will have to resort to Hard Reset – an operation that can cause damage to the device.

The need to turn off the iPhone without swiping across the screen usually occurs when the device freezes during installation mobile application. The sensor fails due to physical impact – for example, after a gadget falls to the ground. When the sensor freezes, most users immediately turn to warranty repairs, not knowing that you can do without the 45-day wait and fix your smartphone yourself.

The probability that after a reboot the frozen sensor will “resurrect” is 90%. But since the screen does not respond to touches, turn off the smartphone in the usual way If it doesn’t work, you’ll have to make it hard reboot . It is done like this:

Step 1. Press two physical buttons at the same time - " Power" And " Home».

Step 2. Hold them down until the Apple logo appears on the screen - about 10 seconds.

Then release the buttons.

Step 3. Wait 4-5 seconds and you will see the home screen of your mobile device.

On iPhone 7, instead of the “Home” button, you need to hold down the volume down key.

How to turn off iPhone if the sensor does not work?

If you just want to turn off the gadget rather than reboot it, you should proceed a little differently:

Step 1. Press " Home» + « Power».

Step 2. Hold the buttons for 4-5 seconds - until the screen goes dark - then release them. Don't wait for the “bitten apple” to appear!

After this, you can turn on the smartphone in the usual way - by holding the “Power” button for 2-3 seconds.

A “hard reset” solves not only the problem with the sensor. TO Hard Reset also resorted to if the iPhone began to have poor network reception or consume too much energy.

Possible consequences of a reboot without using a sensor

If you apply Hard Reset once or twice, negative consequences definitely won't happen. If you constantly resort to a “hard reset”, there is a risk that the memory module will fail, as a result of which all data stored on the iPhone will be lost. There is a widespread opinion among users: every subsequent Hard Reset increases the likelihood that the memory will “sprinkle”. However, this has not been confirmed by experts.

You should resort to a “hard reboot” only as a last resort - when other methods to solve the problem have already been tried and have not brought any results.

Conclusion

A “hard reboot” is the simplest and fastest measure aimed at restoring the sensor’s functionality. But not the only one. If the user is afraid to produce Hard Reset, he can contact iTunes– the media harvester will restore the device, and along with the restoration, the gadget will reboot. There is an option for the most cautious users: wait until the smartphone is discharged and turns itself off, and then “start” it in the usual way.

Freezing is a problem that every computer technology. At some point, one of the programs begins to behave incorrectly or conflicts with another program, and as a result, the entire device is inoperative. This is exactly the situation that is called freezing.

iPhone is also susceptible to this problem and may freeze from time to time. Usually when iPhone freezing refuses to shut down or reboot, which confuses the user. Most often, older models such as iPhone 4, 4s, 5, 5s and 6 freeze. But sometimes even iPhone users 6s and 7.

If you find yourself in such a situation, then this material should help you; here you will learn what to do if your iPhone is frozen.

iPhone frozen and won't turn off or restart

Usually, if the iPhone freezes, users try to turn it off or restart it using standard procedure, namely by long pressing the Power/Lock button. Unfortunately, in most cases when the iPhone freezes this method shutdown does not work. The iPhone continues to work and run frozen applications no matter how long the user presses the power button.

But iPhone has alternative way shutdown, which bypasses operating system iOS. Thanks to this, this shutdown method works even on completely frozen devices. The method is to simultaneously press the Power/Lock button.

Home and Power buttons

The “Home” and “Power” buttons must be pressed simultaneously and held until the frozen iPhone turns off. After turning off, you need to wait a few seconds and briefly press the power button once. After this, the iPhone will turn on and start working normally.

It should be noted that the “Home + Power” key combination is also responsible for taking a screenshot. But, to take a screenshot, you need to press these keys literally for 1 second; if you hold the keys longer, the freeze protection will work and the iPhone will reboot.

If you have an iPhone X or more new model, then you need to use .

iPhone freezes when turned on

Pressing the Home + Power buttons simultaneously allows you to turn the device off and on in any situation. However this procedure does not guarantee that the iPhone will not freeze again during the startup process.

If your iPhone freezes even before full load device, then you can use the recovery mode called “ Recovery Mode" With its help you can restore the initial state iPhone and bring it back to life. But, you need to take into account that this procedure is equivalent to resetting to factory settings and leads to the deletion of all user data.

In order to enter Recovery mode Mode on the iPhone and perform a recovery, you need to do the following:

Turn off your iPhone and wait a couple of minutes for all programs to finish their work. If your iPhone won't turn off in a standard way, then you can resort to the “Home + Power” combination described above.
Next, you need to press the “Home” button and, without releasing it, connect the iPhone to the computer via a Lightning cable.
Once connected, continue to hold the Home button until the iTunes logo and cable image appear on your iPhone.
Now you need to release the Home button and launch iTunes on your computer.
IN iTunes program you need to go to the iPhone settings and click on the “Restore iPhone” button.

Restore iPhone button

In this way, you can solve the problem with the iPhone freezing when turned on, but, as already said, for this you will need to sacrifice everything user files. You can read more about Recovery Mode in our article.

Also on Apple devices there is a so-called DFU mode or Device Firmware Update. If the recovery mode does not help, then you can try and try the recovery again.

Nothing is more annoying when using your iPhone than it freezing and turning off at the most inopportune moment. If one of these troubles has affected you, read our recommendations and you will find out what to do if your iPhone freezes and won’t turn on.

For ease of reading, please use the article navigation.

Tips for everyone modern models iPhone: 4 and 4s, 5 and 5s, 6 and 6s, 7 and 7s.

What to do if your iPhone turns off and won’t turn on:

What to do is stuck:

If your phone is stuck in the menu, on Apple, or when locked, try turning it off in the usual way:

Press and hold the “ button Nutrition” until the slider appears “ Turn off”

Move the slider to the right to turn off your iPhone.

What to do if your iPhone freezes and won’t turn on:

If you cannot turn off the device in the usual way and the screen does not respond to touches, you must perform a forced reboot. To do this, simultaneously press and hold the “ Nutrition" And " Home” for about 10 seconds until the iPhone turns off.

What to do if it freezes in applications:

If your iPhone freezes in apps and won't turn off, then something is wrong with those apps. Typically popular and famous programs do not lead to system freezes and glitches. It follows that the “freezing” application should simply be deleted or, if it is very necessary, think about updating it - perhaps in new version program errors have been corrected.

If you do not know how to remove applications, we recommend that you read the materials on our website.

How to restore iPhone functionality using iTunes:

If rebooting and deleting applications does not help and the iPhone continues to freeze, then you need to reset the settings to restore the phone to its original state, in other words, to its out-of-the-box state.

Please note that when you reset your iPhone, all data will be deleted! They can be restored from backup copy. If you don't have it, then read how to do it backup to iPhone. The process is not complicated, but you can always be sure that your photos and files will be safe, even if your smartphone breaks or is lost.

Recovery instructions:

Connect iPhone to computer
Open iTunes and select your iPhone from the list.

If your smartphone does not appear in the list, you need to put it into recovery mode. To do this, connect the USB charging cable to your computer (do not connect to your iPhone yet), press and hold the “ button Home” on the iPhone and, without releasing the button, plug the cable into the phone. Hold the “ button Home” until the iTunes logo appears on the screen.

Click the “ Restore iPhone ", and then " Restore ” to confirm.

After this, the iPhone should return to factory condition and after initial setup you can begin restoring your data from the backup.

We hope our tips helped you, and now you know what to do if your iPhone freezes or won’t turn on. You can ask questions in the comments.

Yes Yes, iPhone smartphones They can also freeze. You may never encounter this, but the fact remains. However, this is not a problem, since after a reboot the device will most likely resume operation. The problem is different - the iPhone cannot be turned off or restarted in the usual way. Accordingly, the question arises - what to do?

Indeed, if you click on POWER button, nothing will happen.

Apple has come up with a way to reboot the device to similar situations. And it consists of this: you need to press not only the POWER button, but also HOME button, and do it at the same time! Thus, you press the keys and hold them for about 10-20 seconds until the screen goes dark.

As soon as the screen goes dark, you can release the keys. If suddenly the reboot does not take place and the screen goes dark, press the POWER button to turn on your device.

If holding the HOME and POWER buttons for 10-20 seconds does not help, hold them longer. In some cases, this may take a minute or more, but the device should reboot.

Please note that this method works on all iPhones up to 5, 5s, 6, 6 Plus, 6s, 6s Plus. In the case of the iPhone 7 and iPhone 7 Plus, the process is slightly different. The fact is that Apple company, starting with the indicated models, abandoned physical button HOME, so the forced reboot procedure has changed.

If you have an iPhone 7 or 7 Plus, you need to hold down the POWER key and the Volume Down key until the device restarts.

What if it doesn't work? HOME key or POWER? Force reboot frozen device will not work. In this case, you have only one thing to do - wait until the battery in your iPhone runs out, put it on charge and turn on the device in the usual way.

Every owner of a smartphone or other iOS device, at least once, has encountered a device failure when it does not respond to touch. On iPhone work 5 can be influenced by many different factors, but in most cases the problem can be solved by simply restarting the smart device.

How to turn off iPhone 5 if it's frozen

In a situation where the sensor is working, to bring the smartphone to life, it must be turned off. To do this, you need to hold down the lock, then slide your finger across the screen to confirm the action. It happens that the sensor freezes. To simply turn off the device, you need to simultaneously press both the power and “Home” buttons for 3-4 seconds, after which the iPhone 5 will turn off without restarting. To turn on the device, you must press the phone lock again.

Sometimes problems occur not only with the sensor, but also the keys stop responding to commands. How to restart iPhone 5 or turn it off completely if neither one nor the other works? In this situation, there is only one thing left to do - wait. complete discharge device. When the phone turns off on its own, you should immediately connect it to charger, and then turn it on again. If the proposed methods did not help, and the iPhone 5 does not turn off, then take the device to service center.

How to restart iPhone 5

After purchasing a long-awaited device, the owners enjoy the opportunity to work for a long time smart device using multiple applications and programs simultaneously. But nothing is perfect, so when the moment comes that the phone cannot cope with numerous commands, the user begins to panic. Don’t despair and look for the nearest service center to ask how to force restart your iPhone. Try to solve the problem yourself in several ways.

Normal reboot of iPhone 5 using a button combination

Sometimes, to bring the device back to life, you need to restart it. How to restart an iPhone 5 that is running in normal mode?

hold down “Power” until the “Cancel” and “Shutdown” commands appear;
touch the screen in the left border of the “Turn off” key;
Without looking up from the sensor surface, move your finger to its right side;
wait complete shutdown device, then briefly press “Power”;
the display will show the Apple logo, then it will start new download iPhone 5.

Force reboot

How to completely restart an iPhone if the sensor is not responding? To do this, simultaneously hold down the “Home” and power keys for 5-7 seconds. The display will go dark. Then release the mechanical control. When the manufacturer's logo (apple) appears on the screen, briefly press “Power”. The phone should start working normally. Remember that the last option is forced restart iPhone 5, which may lead to a software failure. Use this procedure only in the most extreme cases.

Sometimes disassembling the case helps bring your smartphone back to life. This can be done using a screwdriver, which should be used to unscrew the mounting bolts at the bottom of the mobile phone. The goal is the battery, which needs to be removed and then put back in again. This method is suitable for phones that have already expired guarantee period. If the warranty is still valid, you cannot open the case yourself.

How to restart iPhone without lock button

All of the above methods are carried out using mechanical control. However, if a mechanical breakdown occurs, how to restart or how to turn on the iPhone without the lock button? iPhone creators 5 took into account the limited resource of mechanical control, so it is quite possible to control a smartphone when the sensor is working. How to restart iPhone 5 without locking? To activate phone control without mechanics, you must enable the Assistive Touch function. It allows you to customize device control using gestures.

A soft reboot does not justify itself, because you cannot use a smartphone for a long time without proper control. If you know the answer to how to restart an iPhone without the top button or with a black screen, then you can do this several times, and then you will still have to contact the service center. Specialists will open the device, replace the lock/power key, reassemble it and return it in working condition.

How to use Assistive Touch

This function can be used not only by phone owners who are interested in how to reboot iPhone 5 without mechanical control, but also by people with disabilities. If it is difficult for a person to use mechanics or standard gestures, but it is more convenient to press in a certain place on the screen, he can activate Assistive Touch:

go to the options “Settings” - “General” - “ Universal access»;
activate “Assistive Touch” by moving the slider to the “Enable” position;
click the software option that appears;
select the “Device” function, go to key management;
in the menu, press and hold “Screen lock”;
By analogy with a simple restart, move the “Turn off” button to the right;
if the device requires a password, enter it;
To turn on a smartphone with a faulty lock, you need to connect it with a USB cable to the computer.