Reset zte cell phone to factory settings.

Often the technology fails. Most often, the reason lies not in the hardware, but in the device system itself. The reasons for this can be completely different: accidental deletion system files, virus infection or frequently occurring critical errors.

In order not to reflash the phone’s operating system, you can use the so-called Hard Reset or reset to factory settings. After this, all damaged or lost files will be restored.

Each phone is initially equipped with software that allows you to roll back custom settings to their original form. At the same time, be prepared that all data will be deleted from your ZTE phone: photos, videos, audio and even contacts (if they are saved in the phone’s memory). The data stored on the SIM card and built-in memory card will remain intact.

Therefore, be sure to back up the information stored on your phone. This can be done either from the device itself or by connecting it to a computer.

Unlike flashing, resetting a ZTE router is absolutely safe and will not be considered hacking software if you suddenly decide to return faulty device under warranty.

There are several ways to reset your phone to factory settings. Depending on what the reason for your decision is: a malfunction of ZTE or as a preventive measure, one or another method may not work. Let's look at the most popular ones.

Android System Recovery

Any ZTE phone running on the Android operating system can be returned to its original settings using universal method. To do this, the device's battery must be charged at least 30%. After this, follow these steps:

1. turn off the power to your device;
2. hold down the following key combination at the same time: on/off, volume up;
3. a screen with the Android icon will appear, a list of available commands, data about your ZTE phone (firmware version);
4. control through the list is carried out using the volume down and up keys, confirm the selection with the power button;
5. Scroll down the list and select “wipe data/factory reset” - full reset to factory settings;
6. confirm the action, wait for the operation to complete;
7. select the first line from the list “reboot system now”.

After this, the phone will reboot and all settings will be reset to factory settings.

Telephone code

If previous method did not work or the phone does not have recovery for some reason (this could be due to a virus or root installation), then use the following factory reset method ZTE settings:

1. remove the SIM card from the device (if you have one);
2. then launch the dialing window and click “emergency call”;
3. enter next command: *983*987#;
4. After this, the device will ask you for permission to complete removal data (erase everything);
5. confirm your intentions and wait for the operation to complete.

ClockworkMod

For this method availability required third party utility to restore phone data to factory settings - ClockworkMod Recovery. It is distributed absolutely free of charge, and you can download it from official store applications for android.

According to their own functional features ClockworkMod Recovery is similar to the built-in Android System Recovery, but has a number of advantages. For example, the ability to backup data to an SD card and run the firmware distribution in safe mode.

After installation, it is automatically the basic recovery software and is launched in the same way: using the volume up keys and turning on/off the phone's power.

Standard System Restore

This method is only suitable if the device is working.

1. go to the settings menu of your android;
2. Scroll through the list and find the line “data reset and recovery”
3. two Hard Reset options will be available here: resetting settings and completely removing all DRM certificates;
4. Here you can also configure data backup, for this you will need Account Google;
5. after you change required parameters select full recovery data and wait for the procedure to complete.

As you can see, resetting to factory settings is quite simple on any ZTE phone model. The very first method will help most users; for more advanced users, it is recommended to download a special third party application recovery.

Found a typo? Select the text and press Ctrl + Enter

Are you looking for a way to make your ZTE faster? Do you want to clear all data on ZTE before selling it to someone else? What you need is a ZTE factory reset. What is this? Factory reset(hard reset) is an operation that deletes all data (including settings, apps, calendars, pictures, etc.) on your ZTE Blade and returns to default settings that make your device look like it came straight from the manufacturer. When do you need to perform such an operation? When you need your ZTE to work faster when there are some difficulties in operation operating system. Here's how to do it ZTE reset.

Soft factory reset and hard factory reset are two methods you can use to factory reset your ZTE and get your phone back to normal so it will be like new. Perhaps you want to reset your phone's security because you forgot your screen lock password. Or you want to restore factory settings using hard reset phone. Before rebooting your Zmax 2, I suggest you try a ZTE soft reset first. Wallpaper for Android.

Easy way to soft reset ZTE Zmax 2. Follow these steps:

1. Click ZTE main menu.

2. Tap Settings > Privacy.

3. Tap Factory Data Reset.

4. Tap Reset phone. Check, remove the SD card if you want to remove the memory card.

5. Click Erase Everything.

Wait for a few seconds, your phone will automatically restart and ZTE reset will be completed. If you see that your problem is still not fixed, you can try hard reset ZTE phone.

We do a hard reset of ZTE settings to factory settings

1. Please turn off ZTE.

2. Remove the battery from the phone and wait a few seconds. Then return it.

3. Press the Volume Up and Power button at the same time until it vibrates, then release the Power button, the ZTE recovery screen will appear there.

4. A couple of options will appear on the screen, select “Wipe data/Factory reset” using the Volume key and confirm the selection with the Power button.

5. Then on the next screen select – delete all user data (delete all user data) using the Volume button, press the Power button to confirm.

6. All ZTE data and cache will be erased automatically and a system reboot, factory reset screen will appear.

8. Your phone will turn off and restart.

ZTE hard reset completed. So wait a few minutes. And then you will see that your smartphone works better than before.

• All music, videos, files and folders will be deleted automatically.
• Your entire contact list and history of calls or SMS-MMS chats will be automatically formatted from your smartphone.
• This means that all information will be deleted from your phones that you have saved in your phone before.
• So I suggest you, before you reset your ZTE phone Zmax 2, please back up your phones like music, videos, files and folders, contact list and other important things.

If you have any questions about hard reset ZTE or any tips or tricks to improve Smartphone mainly ZTE smartphones, please feel free to share with us; We will publish an article about you. If you have any questions about these hard reset tips, please feel free to comment below. Of course you are important to us.

Option 1

1. First you need to turn off the gadget
2. Press for a while Volume Down And Nutrition
3. When the reset menu appears on the display, stop pressing the buttons
4. Using the button Volume Down select Clear eMMC and confirm by pressing the power button

Option 2

1. First you need to turn off your phone
2. Click Volume Up + Nutrition for a little bit
3. Stop pressing the buttons when it appears on the screen Android image or logo ). Hold until the splash screen appears
4. Clamp Nutrition to enter Recovery Mode
5. In the menu that appears, select Wipe Data/Factory Reset using the buttons Volume Adjustment and confirm by pressing the button ) and without releasing, press the power button (

6. Select Yes--delete all user data by pressing the keys Volume Adjustment and confirm your choice by pressing the button ) and without releasing, press the power button (

7. Finally, to complete the reset and reboot process, select reboot system now

Option 3

1. Go to Phone Settings

2. Choose Recovery and reset

3. Then click on Reset settings

4. Click Reset and agree to the destruction of personal data
5. The reset process is completed after the phone restarts

Option 4

1. Enter *983*22387# in the dialer and press the Call button
2. Select Erase Everything from the menu
3. After the phone restarts, the reset is completed

ZTE Blade GF3 factory reset

Attention!

• Videos and images for some actions may not exactly match your specific phone model.
• After performing a hard reset, all your personal applications and the data that is in memory will be deleted.
• For a factory reset to be successful, the battery must be charged to about 80%.

Performing the Hard Reset function involves completely resetting all settings and returning the phone to its “virgin” state. Those. After a reboot, all data (contacts, programs, messages, etc.) will be permanently deleted, and the phone will be returned to its factory settings. In this case, the data saved on the memory card and on the SIM card is not deleted.

Before performing for ZTE Skate Hard Reset, be sure to back up your data.

There are several ways execution Hard Reset.

Method 1 Hard Reset ZTE Skate

The easiest way is to click "Home" - "Settings" - "Privacy" - "Factory" data reset"(Reset to factory settings) - "Reset phone" - "Erase everything". Unfortunately, if any system errors This method cannot always be used.

Method 2

You need to turn on the phone without a SIM card. Select " Emergency call"(Emergency call), then dial: *983*987# - confirm “Erase everything”. Will be restored after reboot initial settings. This method Suitable for most ZTE models.

Method 3

You can also perform a ZTE Skate Hard Reset with using CWM Recovery. Load CWM (Press “Home” + “Up” + “On” and hold for 2-3 seconds) – select “wipe data/factory reset” - confirm with the “back” button, select “Yes - delete all data” then again Once we confirm the deletion. After the reboot, the data and cache sections are in internal memory phone will be cleaned. All content will also be deleted system folder android_secure on the memory card and the sd-ext partition.

As for data backup, there are several options here too. Sometimes you don't have to use it special programs to recover data. It is enough to check the box next to the “data backup” item in the privacy settings, and you must have active connection Internet. All information will be saved on Google server. You can restore contacts and emails by synchronizing your phone with your Google accounts. Applications can be restored using Google Market. We go to the Google market - click “menu” - select “my applications” - click the “all” tab - download the necessary applications.

Do backup copy You can also download it CWM Recovery. Open “backup & restore” - “backup” - confirm. After creating a copy, exit using the reboot system now item. After the procedure, a file with saved data will appear on the SD card. If you want to rename it, then there should be no Russian characters or spaces in the name.

Restoring from a backup copy is also not difficult. Load CWM - select “Backup & restore” - “restore” - select the backup copy - confirm - exit using “Reboot system now”.

Execution example Hard Reset on ZTE Skate can be seen in this video.