How to remove an unnecessary object from a photo. How to remove unnecessary objects in photos

Photos downloaded from the Internet do not always correspond to what we are looking for. Digital images, especially high-quality ones, come to our PC with various inscriptions and watermarks that are hardly noticeable on the pages of search sites. There is no need to refuse a picture you like if you can edit it.

If the printed text covers a small area of the photo, then cropping and adjusting to right size using a simple editor built into Windows with a Paint palette icon - an option for those who are just starting to master the PC. We launch the application via “Start” > “All Programs” > “Accessories” > “Paint” or enter “Paint” in the Windows search bar and select it in the window that opens - the program will appear before your eyes. We open the file we need using the “Open” command - in the upper left corner of the menu or “ctrl + o” on the keyboard. Select the desired area using the “Select” command and cut it off “ctrl+ shift+x” - thereby cutting off the watermark text, but without disturbing general view Images. If necessary, change the size and tilt of the cropped image “ctrl+w”, and then save it in the format you need. To save the entire area of the picture when removing a watermark or mark, we will use the most famous program on image editing Adobe Photoshop CS5, downloaded from a verified torrent tracker. Or online Photoshop, which, although inferior in functionality, can be used in this situation with decent results. Let's consider the editing option installed on a PC - i.e. full Photoshop. Open a digital photograph using the commands in the main menu of the program “File” > “Open” or “ctrl+o”. Information! To open a file or document, all editors, including online Photoshop, use the same combination of keyboard keys. Select the “Stamp” tool and hold down the “alt” key and click with the left mouse on that part of the image that will serve as the basis and color part of the inscription. Next, click on a small section of the inscription and notice that it has been replaced by a drawing of the starting point. Slowly and deliberately we go over the entire watermark, from time to time changing the area for cloning. For clearer editing, call up the “Navigator” window - in the menu bar, click on the “Window” insert, selecting the desired palette, where, using the slider, we will enlarge the area with the inscription on our photo. The Patch tool also does a very good job of removing unwanted items. big size. Let's try to work with the patch: hold down the right mouse, outline a piece of watercolor text and drag the selected area to the space free from writing. We save the photograph cleared of the watermark “File” > “Save as...” or using “ctrl + shift + s” - a key combination for saving files in all existing editors.

When editing photos, always keep in mind the fact that graphics programs are not all-powerful, even powerful ones like Adobe Photoshop. Bright, large-sized inscriptions on complex areas of images: face, hands, various patterns, etc. cannot be removed without being noticeable. In our case, pictures with monochromatic areas, large clear boundaries and smooth transitions are suitable for high-quality editing.

We remove unnecessary objects on photos. Today we will talk about how to remove an unnecessary object in a photo using photoshop - online EDITOR. For example like this. The first photo shows an unnecessary empty basket. On the second I removed it.

Read more...
For a long time we used the wonderful website Webinpaint, in which such objects were removed easily and quickly, in three clicks. I had a lesson on this site, delivered in 2010, which . During this time, the lesson spread very far, and many people used it. But now THE SITE HAS BEEN MADE PAID, and I receive a lot of questions and requests to find something similar.
Alas, everything in our world is becoming more expensive, and all such sites are now paid. Therefore, for everyone who does not know how to use Photoshop, I will show you how to remove an unnecessary object in a photograph using Photoshop - online online Pixlr, simply called EDITOR

If you just want to remove an object on a colored background, you can do this using the BRUSH tool. For example, let’s take this picture. And we’ll take a month away from it.

Since here the object is on a uniform, blue background, we take the BRUSH tool.

And we select a color to paint over the unnecessary object.
1- open the color selection.
2.- Click the brush in the place which color we need to paint the object. THE PROGRAM WILL SELECT THE COLOR ITSELF.
3.- Confirm the color choice.

Now select the brush size and paint the object with it. In the color selection window the one we need is lit.

Now we just paint over the unnecessary object. That's all.

ATTENTION. This is the easiest option for removing an object, since it only requires ONE color. If the unnecessary object is located on several colors, then you need to SELECT THE COLOR each time. Although this is not difficult, since it is selected automatically. But it's pretty boring.

But if an object we don’t need is located on grass, sand, a forest background, etc., then simple selection There's nothing you can do about color here. Then we start using the STAMP tool.
Let's take a picture from the previous lesson. And we also remove the Christmas tree in the foreground.

We go to the site in Pixlr.com Editor., and upload the image.

ATTENTION. If you insert a picture from the Internet, then after inserting its address, a download sign will appear. Just wait until the picture loads, the sign will remove itself.
Select the STAMP tool, its size and shape.

Let's get to work. Take the Stamp tool and, holding down the Ctrl key, select the cloning source by simply clicking on it (it should be next to the object to be removed; this is essentially what we will use to sketch this object):

ATTENTION! Please note that the copy point moves along with the stamp tool, that is, periodically, if the pattern does not match, you need to set new point copy using the Ctrl key.
In our example, the top of the Christmas tree is against the background of red Christmas trees. Having set the copy point, I painted the top red. Next came the yellow grass, and I again set the copy point, holding down the Ctrl key, select the cloning source - GRASS.

And I go to the bottom part, where there is green grass, and also set the copy point, holding down the Ctrl key, select the cloning source - GREEN GRASS

And I remove the very bottom part of the Christmas tree. That's all.

Believe me, this is done much faster than I describe. Hold down the Ctrl key, click, paint over the desired part, click again Ctrl key, and paint over again. Everything is pretty fast.

Restoring the lost texture. As you may have noticed, when sketching the Christmas tree, below, the grass was slightly damaged, so I suggest restoring it also using the Stamp tool. Select a clone source with good texture and, using a large stamp brush, preferably a square one, paint over the area where the texture is broken.

If everything suits us, then we save our photo. Click FILE - SAVE, or click on the cross in the right corner. We write the name of our image, select the format and click on “Yes”

This is what we got, with the texture already adjusted a little.

This way, quite quickly, you can remove all unnecessary objects from your photos. Don’t be afraid to ruin something, you can always undo your actions, or paint over it again. Try boldly and you will succeed!

Good day everyone, my dear friends. I’m with you again, Dmitry Kostin. I remembered a lot of moments here when you are being photographed and some guy gets into the frame extra person or some object that is out of place in the photo. Sound familiar? You only notice this when you can’t take another photo. Leave it as is? No way!

Unnecessary objects can be thrown out of the photo, and no one will notice the difference. Do you want to know how to remove an unnecessary object from a photo in Photoshop? Then read on.

Content-aware padding

As you can see, the cat has disappeared, but you are not left with a cut out area as is usually the case. The void was filled with adjacent pixels, which, according to the program itself, would most likely end up in this place.

I had a small problem. when I removed the cat, a piece of the handle appeared in the area where the tail should be (apparently a clothes dryer). But it cleans up in exactly the same way. And now you have a clean blanket without a baby.

Likewise, I decided to remove the textbook from my desk. Do you agree that it is very simple? But that is not all.

Stamp tool

Sometimes the first method may not be entirely suitable for the purposes we need. But it doesn't matter. Photoshop almost always has several solutions for specific task. And this case is no exception.

Let's take a picture of a beautiful view of the coast. A beautiful view, but as you can see, a cheeky bird flew past and got into the frame. It arrived beautifully, but let’s say it’s not needed there.

Then we roll up our sleeves, take the lasso and carry out all the operations from the first point. Let's see what we got. Somehow not very good, right?

The Stamp tool will help us with this. This tool somewhat similar to "Healing brush", which we used, but there are differences. With the healing brush, we took the donor area and painted over the unnecessary detail with it in such a way that the colors that correspond to this area were then superimposed. Nothing like this happens with a stamp.

If it is somehow difficult for you to understand this process in text form, then I made a separate video lesson especially for you. Enjoy watching.

It turned out to be quite a good picture, as if it had happened. You can combine several methods to achieve the desired result.

Do you have photos where you can remove anything unnecessary? If yes, then it's time to get rid of it. Well, if you want to learn all the possibilities of Photoshop in a short time, then I recommend that you take a look excellent video course. All the information in it is presented amazingly and is designed for any level of user.

Well, that's all for me. I hope you enjoyed my lesson today. Don't forget to subscribe to updates on blog articles, then you will be the first to know about the release interesting articles and another interesting information. Check out other blog articles as well. I'm sure you'll find something interesting for yourself. Well, I say goodbye to you. Bye bye!

Best regards, Dmitry Kostin

We remove unnecessary objects from photographs. Today we will talk about how to remove an unnecessary object in a photo using Photoshop - online EDITOR. For example like this. The first photo shows an unnecessary empty basket. On the second I removed it.

We have been using this wonderful site for a long time. Webinpaint, in which such objects were removed easily and quickly, in three clicks. I had a lesson on this site, delivered in 2010, which . During this time, the lesson spread very far, and many people used it. But now the SITE HAS BEEN PAID, and I get a lot of questions and requests to find something similar.
Alas, everything in our world is becoming more expensive, and all such sites are now paid. That's why, I’ll show everyone who doesn’t know how to use Photoshop how to remove an unnecessary object from a photo. using Photoshop - online online Pixlr, simply called EDITOR

If you just want to remove an object on a colored background, then you can do this using BRUSH tool. For example, let’s take this picture. And we’ll take a month away from it.

Since here the object is on a uniform, blue background, we take the tool BRUSH.

Now select the brush size and paint the object with it. In the color selection window the one we need is lit.

Now we just paint over the unnecessary object. That's all.

But if an object we don’t need is located on grass, sand, a forest background, etc., then simply choosing a color won’t do anything about it. Then we start using the STAMP tool.
Let's take a picture from the previous lesson. And we also remove the Christmas tree in the foreground.

We go to the site in Pixlr.com Editor. , and upload the image.

Let's get to work. Take the Stamp tool and, holding down the Ctrl key, select the cloning source, simply by clicking on it (it should be next to the object to be removed; this is essentially what we will use to sketch this object):

ATTENTION! Please note that the copy point moves along with the stamp tool, that is, periodically, if the pattern does not match, you need to set a new copy point using the key Ctrl.
In our example- the top of the Christmas tree is against the background of red Christmas trees. Having set the copy point, I painted the top red. Next came the yellow grass, and I again set the copy point, holding down the Ctrl key, select the cloning source - GRASS.

And I go to the bottom part, where there is green grass, and also set the copy point, Holding down the Ctrl key, select the cloning source - GREEN GRASS

And I remove the very bottom part of the Christmas tree. That's all.

Believe me, this is done much faster than I describe. Hold down the Ctrl key, click, paint over the desired part, click again with the Ctrl key, and paint over again. Everything is pretty fast.

If everything suits us, then we save our photo. Click FILE - SAVE, or click on the cross in the right corner. We write the name of our image, select the format and click on “Yes”

This is what we got, with the texture already adjusted a little.

Modern technologies make life much easier for photography enthusiasts. Even if the photo didn’t turn out very well, with the help Photoshop programs You can retouch it on your computer and remove unwanted objects. WITH mobile application TouchRetouch makes it even easier to edit photos and remove unnecessary things from them - there is no need to use computer mouse, one finger is enough.

In contact with

How to remove unnecessary objects from a photo

1 . Open the application, click on " Albums» and select a photo.

2 . Zoom in on the part of the image you want to remove.

3 . Press " Deleting objects". By default, the tool will open Brush" In one motion, “paint over” the extra object. Press " Forward».

4 . On at this stage the unnecessary object should disappear from the photo. If there are still any extra lines left, erase them again. You can also click on the " Back", return everything as it was and try again.

Alternatively, you can use the " Lasso", which also very accurately notes extra objects. « Quick edits" And "Deleting lines" act in a similar way.