The sound plays quietly on the laptop. What to do if there is low sound on the computer

Probably, each of us has encountered a situation where the sound is quiet when watching movies. At the same time, everything sound settings The systems are specified correctly, the speakers are operating at maximum and it is impossible to find the source of the problem. What to do in this case and how to change quiet sound in movies on loud?

Adjusting sound in films

Most users use a collection of codecs. It must be installed to get rid of the quiet sound in most players.

If you are using as your main player, do the following actions. We open the film in top menu program, click “Play”, then “Audio Track” and “Options”.

The settings window will open. Go to the “Built-in filters” branch and select “Audio switch”. We set the settings as in the picture.

Now we open the film again. The sound will be loud.

Let's assume that you use . To add sound in this player, you need to configure the graphic equalizer. To do this, click right click mouse on free space. Select " Additional features", "Graphic equalizer".

Now, by moving the sound control sliders, we adjust the playback quality of the audio track.

As for a player like KNPlayer, the settings are as follows. Launch the movie, right-click and select “Audio”, “Rare filters”, “Voice enhancement”.

You can also select “Equalizer” from this list and play with the settings.

If these methods did not help solve the problem, edit Windows settings. Click “Start”, “Control Panel”, select the “Hardware and Sound” section, and again “Sound”.

A new window will open. Go to the “Improvements” tab. Place a check mark next to “Loudness”. Click “Ok”.

You can also turn on “Equalizer” and set the settings.

In this way, you can not only adjust the sound in films, but also the quality of its playback.

Sometimes we have to face such an unpleasant situation when the volume of the laptop speakers is weak. This is especially noticeable when watching a movie. I have long noticed that soundtrack in almost any film it does not contain the maximum recorded volume. That's why we have to listen to the words of the main characters of the film. What to do in such a situation?

So, we will solve the current problem using the following example: popular player, How Media Player Classic. This player doesn't take up much space. local disk, consumes practically no resources, and in addition, plays virtually all popular video files.

This topic is relevant especially among low-budget laptop models, in which the sound is barely audible. So, how to fix an unpleasant situation and increase sound volume when watching a movie in Media video player Player Classic?

And this is done as easily as possible. Let's launch our MPC player. Go to View > Settings. In the left column, click Built-in filters – Audio switch. Next, select the Audio section and go to Options.

As a rule, a value of +100 is quite sufficient. If you choose higher value, then I think the sound will be distorted. Regulate this slider as you wish, achieving maximum sound and speech intelligibility. Well, that's all for today, good luck to everyone and see you again!

Hello everyone, dear readers! Almost every PC user faces the problem of quiet sound. This can depend on many reasons, ranging from weak speakers and damaged contacts, to incorrect drivers. Now I will tell you in detail how to fix quiet sound on a computer.

Reasons for quiet sound on PC

Let's first figure out why the sound on the computer has become quieter.

Connectors

The most common problem in this situation is the input jack. Many devices are subject to constant connection different types headphones, speakers and other gadgets. Because of this, the connector wears out and over time begins to make poor contact. Agree, I’m not the only one who knows what it’s like to constantly adjust a wire, bend it so that the sound becomes a little louder than before.

It is worth noting that when it comes to headphones, some models have additional volume buttons. Try changing it on them. Perhaps this will help you. One way or another, if the sound suddenly becomes quieter, then the problem here is clearly not additional buttons(unless you clicked them by accident). First, pay attention to the connectors and input wires.

Drivers

The second reason is the pressing problem of drivers. They may be outdated and need updating. You also need to remember that for correct loud sound required correct drivers. They must be downloaded from official services. Often a “conflict” may arise different drivers between themselves. Don't lose sight of this point either.

Update:

So, let's look at the moment of updating the “firewood”. You should move according to my instructions.

It is worth remembering that there should not be any signs opposite your driver. They symbolize the presence of errors.

System volume

So, if all of the above in in perfect order, then the problem may lie in the system settings or drivers. Before starting the settings, it is best to turn on any audio track to notice changes. Double-check the main volume, which is indicated by a column icon located in the lower right corner of the screen. If the roller is at the bottom, then raise it higher.

You need to pay attention to the "Management" menu sound devices" The point is that here you need to select the device through which you play sound files. There you will see a scale, the sound of which moves from top to bottom. This indicates that the sound is still recognized by the computer.

Now let's move on to working with tabs:

• Levels. Make sure all the sliders here are set to maximum;
• Special. Pay attention to the inscription “Limited output”. If there is a checkmark on it, be sure to remove it.
• Improvement. Here you will see the “Loud Compensation” item. You must check the box next to the tab for this naming. At the same time, other items should be unchecked.

What to do if there is still a quiet sound?

Yes, it is possible that all the recommendations above are not crowned with success. The sound remained the same as it was quiet. In this case, you need to seek help special utility, which builds the drivers. It can also be used in some individual cases (for example: the sound is always excellent, but on a certain film it is very quiet). But let's talk about the program a little later. First, let's try to configure the driver ourselves.

Setting up and testing Realtek. This is the most popular driver. Its icon is usually located in the lower right corner of the screen.

Through the “Hardware and Sound” menu tab we find the driver of the same name.

In it you can view all the information, including settings. Take a closer look at all the filters, volume and additional settings videos.

Special Applications

Yes, a little higher I told you about the existence this kind programs. They are very effective and often come to the rescue in individual cases. Let's look at one of the most popular options - the application Sound Booster.

The program has many positive qualities. It can enhance the sound of audio and video files, in in social networks, in games, browsers, etc. Functional management is quite convenient and simple. It is also possible to control using hot keys. You can configure the program so that it runs in automatic mode right after the system starts. Its main advantage is that you will not encounter any distortion in either sound or image. The program is really very effective and will be useful in any case.

Quiet sound in headphones on a computer

The problem can be divided into several options. First, check all contacts and connectors. Secondly, the issue may be software error. This includes both herself operating system, and the work of drivers.

So, if you are sure that everything should be fine, but there is still no sound, try a system restore. This is done through the Start menu. Go to Programs, Utilities. There we select the “System Restore” item. However, you should not come to this solution to the problem, since this is not the most The best way return sound.

Quiet sound on a computer in Windows 7

If you just installed Win7 OS, but there is no sound or very quiet sound, check if all devices are connected to the computer. The fact is that often the system does not include necessary drivers, because it does not see the device. In this case, you need to check all the “firewood” for the presence of exclamation marks. If they are available, then the driver just needs to be turned on or downloaded from the manufacturer’s official website.

Sound settings are carried out in the following way.

1. We enter the “Start” panel,
2. then “Control Panel” and “Sound”.
3. Now a window will appear in front of you where you can make all the desired settings.

To make the settings audible to your ear, you must use the “Play” function. There is a corresponding button for this.

Your next step after completing the settings will be to save the settings. To do this, follow the instructions “Next”, “Finish”. You can also configure sound effects here. To do this, in “Sound” you need to click on “Play”, and then select properties.

The “General” tab will show the user the connectors. Here you can find out which ones are connected. In addition, there is a tab called “ Additional settings" In it you can find out what sound effects connected or, on the contrary, disconnected.

After completing the entire sound settings process, be sure to save. To do this, click on the OK button.

The article describes what to do if your computer becomes quiet. So, you have found out the main reasons why the sound on your computer can be very quiet or completely absent. The most common and simple solutions I explained the problems step by step. I hope you get the sound. Don’t forget to ask your questions in the comments, we will solve it. Peace for everyone!

What to do if there is low sound on the computer?