The Fly smartphone has turned off and will not turn on. Turn on your Android phone if you have problems

I’ll say right away that I have a SONY Xperia SP on Android 4.3, but the recipe for the brakes can help owners of other phones.

A little about the brakes

I bought my phone at the end of 2013, and although it is already old by the standards of the phone market, I am quite happy with it.

But not everything is so good, the phone starts to slow down a lot over time. And sometimes, just to make a call, you have to watch the strongest lags for 10-15 seconds. There are times when it is easier to reboot the phone than to wait.

Cleaning your phone and Hard Reset

I already wrote as much as possible, you can start with this, but such cleaning did not help my phone.

I also wrote how to do it, but after completely resetting the phone need to be reconfigured and reinstall the necessary applications.

And then when the lags became so bad that it was necessary to do a Hard Reset again, I decided to disable applications which take up the most memory. And I saw that my Android stopped slowing down, at least it started working normally.

Disabling Google Search

Turning off the Google Search service helped me; the phone started working just fine, the lags are gone at all! I don’t know the problem is in the SONY firmware or in the Google search itself, but this really helped.

What do we have to lose?

Disabling the Google service means it will stop working voice search And Google Now, of course, these are convenient applications, but it’s better without them than with brakes. There is no way to disconnect will not affect regular search in Google Chrome browser, only voice input and voice search will stop working!

Disconnection instructions

If you have made a decision and are ready to disable Google search, then take these steps:

Go to Settings - Applications, for me the “Downloaded” tab opens by default, on other phones the order may be different, look for the “All” tab (scroll to the right)

To make it easier to search, we sort applications by size and look for an application with the name "Google Search"(may be called “Google Search”) and click on it. Here we have it stop, turn off, additionally erase data And clear cache.


Before checking, I recommend restarting your phone.

What if the phone is still slow?

Disabling search helped remove the brakes on my phone. If disabling search does not solve the problem try disabling other "fat" applications.

Write in the comments whether disabling search helped or not?

In this article we will look at some of the most common faults with Fly phones.

Liquid got inside the Fly phone or the phone fell into water

This is a fairly common malfunction. As a result of contact with various types of liquids (tea, coffee, beer, water), some elements of the phone fail (function keys, keyboard and keyboard buttons, joystick, microphone, speaker, etc.). Also, the phone stops working correctly: it won’t charge and won’t turn on. Therefore, it is so important to react correctly after moisture gets inside the device: quickly remove the battery and try to dry the mobile device yourself. But that's not all. The next step is to contact qualified specialists. After all, even if the phone works in normal mode after being “flooded,” this is not a fact that everything is in order with the device. As a rule, a malfunction due to contact with moisture will occur sooner or later, since the corrosion process takes different times.

In our service center, the technicians will eliminate all consequences of liquid ingress: they will ultrasonic wash and dry the mobile device, and if necessary, replace the microcircuits.

The display of the Fly phone does not work, there are stripes on the screen.

If the display does not show, various artifacts have appeared on the screen (stripes, multi-colored spots) or the image flickers, then the best way out is to contact a specialist. This malfunction occurs due to mechanical damage (falls and impacts, pressure), as well as as a result of moisture getting under the phone’s body. In most cases, the display will need to be replaced. If the cable (a flexible part with conductors that connects parts of the phone) or the controller on the board is damaged in “clamshell” or “slider” type phones, then they need to be replaced. The problem may also be a software glitch. Comprehensive device diagnostics will help determine the exact cause of the malfunction of the mobile device.

Fly phone does not turn on.

If your phone turns off and won't turn on again, try charging it for a day first. If this does not help, contact the specialists of our workshop. After diagnostics, the technicians will determine the cause of the breakdown (the result of mechanical stress on the printed circuit board and moisture, battery failure or software failure) and ways to eliminate it (replacing components, updating the firmware).

Fly phone does not charge and discharges quickly.

If the phone does not charge, then the problem lies in the charger or charging connector. You can check the charger yourself by selecting a similar working device. The cause of this malfunction can be either a failure of the power controller as a result of mechanical damage and moisture getting under the mobile case, or a software failure. The service center will replace the charger or charging socket, power controller, and also restore the phone after it has been flooded, and perform firmware firmware.

If your Fly phone discharges quickly, there may be several reasons: a faulty battery or a “non-original” charger. The power amplifier (transmitter) may also be to blame for this malfunction.

If this problem occurs, you must contact specialists who will carry out free diagnostics and promptly fix the problem.

Fly phone does not connect to the network.

If there are problems with the network (the phone does not see the network, the network signal is weak), in most cases the reason needs to be looked for in the SIM card. Insert another SIM card similar to yours into your phone and check it.

If the problem is not in the SIM card, then the reason lies in mechanical damage to the device itself (failure of the radio unit and electronic components). The malfunction may also be caused by a software glitch. To more accurately determine the cause of the breakdown, professional help is needed.

The speaker in the Fly phone does not work.

If the speaker on your phone does not work or is quiet, they can hear you, but you cannot, then most likely the speaker could have failed due to a fall or shock, or as a result of moisture. In this case, the faulty speaker needs to be replaced.

Also, the cause of the breakdown may be chafing of the cable (in clamshells and sliders), which means it needs to be replaced. You can get any services for replacing parts from our service technicians.

MIC is not working.

If you can hear, but you can’t, it’s because of a faulty microphone. To restore normal operation of the microphone, it must be replaced.

There may be other reasons for the microphone malfunction, for example, a software glitch. This will help determine diagnostic testing.

The Fly phone reboots spontaneously, freezes, and becomes glitchy.

The reason for this behavior of the phone may be a software failure and the firmware of the mobile device needs to be updated.

Another reason for incorrect operation may be damage to the device’s board and its elements as a result of a fall and impact on a hard surface, as well as after the phone has been “flooded.” Our workshop specialists will help you understand the cause of the malfunction and eliminate it.

If your phone has no sound, the keyboard, joystick, function keys and other parts do not work, and the phone does not read the SIM card, requires a “security code” or other Fly malfunctions occur, contact our service specialists. They will carry out free diagnostics and fix any breakdowns quickly and efficiently.

How satisfied are you with your device?

Your mark:

Average rating: 2.9

client, fly BL4505

All buttons do not work, after the reboot all but one started working - call reset

Good afternoon
Diagnostics are required, the reason may be a software failure, faults in the power circuit, etc., the cost of repairs is from 1000 rubles, diagnostics are free.

Sergey, Fly FS516-cirrus 12

After a short period of operation, it indicates that the battery is overheating and turns off.

Good afternoon
The reason may be the consumption on the board, the cost of repairs is from 1000 rubles, diagnostics are free.

Catherine, iPhone SE

The phone fell onto the tiles. The touchscreen is damaged and the glass is cracked. The screen lights up when turned on, but there is no image. Is it possible to replace the touchscreen?

Good afternoon
The cost of replacing the display module is from RUB 3,500.

Konstantin, Flu folding bed with SOS button

Hello! The speaker does not work and the caller cannot be heard during a conversation. At the same time, when the gr. connections everything works. What could be the reason?

Good afternoon
Most likely, the voice speaker is faulty, the cost of repair is from 600 rubles, diagnostics are free.

The phone does not start. Sometimes snow appears on the screen and a black stripe runs. It gets warm in the processor area

Good afternoon
Diagnostics are required, there may be malfunctions in microelements of the board, the cost of repairs is from 1000 rubles, diagnostics are free.

Anastasia, Fly fs 554

Hello! when the brightness on the phone is reduced, the screen goes out and does not turn on, while it responds to charging but the screen does not turn on, when connected to a netbook, it sees the phone, tell me how to fix it

Good afternoon
The reasons may be a malfunction of the side buttons, the screen itself (illumination elements), as well as software malfunctions, the cost of repairs starts from 1000 rubles, diagnostics are free.

Elena, Fly FS458

Contact name and number are not displayed when there is an incoming call

Hello!
Try resetting to factory settings. If the problem remains, the cost of restoring the software is 1000 rubles, diagnostics are free.

Svetlana, fly ezzy trendy 3

The child got the phone a little wet, didn’t notice it right away... the phone turns on, the screen is black... only the buttons are lit... what should I do?

Hello!
The cost of repairs after moisture ingress starts from 800 rubles.

ilshat, BL6424

Good afternoon
Most likely, a software failure, the cost of repair is from 1500 rubles, diagnostics are free.

Svetlana, BL4027

A message came for 5 updates and I clicked - update and after that the phone hangs, turns off and boots up on its own, works for about a minute and goes out to make it work you need to take out the battery, after removing it to factory settings everything remains the same

Hello!
Most likely, a software glitch, the cost of the firmware is 1500 rubles.

Anton, Fly fs 454

In the settings, I opened the application menu and began to disable the ones I didn’t need, and at the same time I turned off the ones I didn’t know, then I decided to turn off and turn on the phone, the screen lights up, it starts loading, reaches the end and goes out again, then the same thing again, and so on until the battery runs out or you remove it.

Hello!
Most likely, a software failure, the cost of recovery is 1000 rubles.

Sergey, Fly fs451

Without a SIM card it works fine, you install the SIM and it starts switching itself and goes where it’s not needed

Hello!
Diagnostics are necessary, the reasons may be a software failure, a consequence of moisture, and others, the cost of repairs is from 1000 rubles, diagnostics are free.

Alexei, Fly iq 445

The sensor has stopped working correctly. At the top of the display it works normally, but at the bottom every now and then. The back button also doesn't work

Hello!
The estimated cost of replacing a touch screen is from 2000 rubles.

Olga, FlyTS91, FlyFS401

Hello, help me figure out the problem, it’s the same for two phones. When you connect the charger, the phone turns on, only to show that charging is in progress, and then the phone goes out and does not turn on at all. Help, what is the reason? And how can I download the Android 5.0 application on Android again? Thank you.

Good afternoon
The problem may be in the battery or in a malfunction in the power circuit, also moisture ingress gives the same symptoms, diagnostics are necessary, Android 5.0 software is installed by flashing the phone with data loss, the cost of the firmware is from 800 rubles. Diagnostics are free.

Anastasia, Fly fs 509 nimbus9

The phone is about a year old, after a month a problem with the screen began. When connecting to wi-fi, everything is fine, there are no problems, as soon as I connect the mobile Internet, the attraction begins. The top field (where all the settings open) begins to jump wildly.... it turns on sound, flight mode, geolocation. He goes online himself. And in general it doesn’t behave adequately...there’s no point in bringing it back under warranty, the child dropped it about 3 months ago...there’s a chip on the back cover...

Good afternoon
Diagnostics are required, there may be a software failure, the cost of repairs is from 1000 rubles, diagnostics are free.

OLGA, FLY FS505

THE SCREEN ON THE PHONE IS BLACK SOMETHING IS WRITTEN ON IT AND THE ARROW IS CONSTANTLY RUNNING AND IT DOES NOT REACT TO ANY ACTION

Hello!
Probably a software failure, the cost of repair is 1000 rubles, data may be lost.

Rostislav, fly fs505 nimbus 7

Poor connection. I opened it up, looked under a microscope, the condenser was covered on the board, at the bottom, where the contacts are on the body on which the antenna is located. It is microscopic, 1mm by 0.3mm somewhere. I unsoldered it, but I can’t find the circuit diagram to find out what kind of capacitor is needed there. Tell