The speakerphone turns on spontaneously. How to use speakerphone on iPhone during calls

Speakerphone - convenient feature, allowing you to output audio during calls on your iPhone through your regular smartphone speakers, rather than just a single call speaker or headphones. Many people use the function to talk with their hands free during other activities or to ensure that everyone nearby can hear the interlocutor. The speaker is very easy to use, but perhaps you just recently bought an iPhone and don't know how to activate and deactivate it.

Many iPhone owners They probably already know how to use a speakerphone, and if you are one of them, this article is not for you. We are addressing those who just bought an iPhone and do not yet know how all its functions work.

You can start a call and put it on speaker immediately, or you can do it later at any time during the conversation. In any case, this is done very easily. In the same way, you can turn off the speaker at any time. More details about everything below.

How to use speakerphone during calls

Turning speakerphone on your iPhone is very easy, and one method works on all models and versions of the system.

Start a call as usual through the Phone or Contacts app.
While dialing or the conversation itself, activate the screen of your smartphone.
Click on the "Speaker" button to output audio to the speakers. She will turn white. This means that the Speaker is active.

That's all, you have switched your iPhone to Dynamic mode. Audio will now be output to the main speakers instead of the calling speaker.

The speaker can also be used during audio calls via FaceTime. The method works the same.

Please note that if you minimize the call screen, you will have to return to the Phone app to turn Speaker on or off.

How to turn off speakerphone oniPhone

The speaker turns off just as easily. This can be done at any time during the conversation, or it will disconnect automatically once it ends.

During a call, activate the iPhone screen.
Press the Speaker button until it stops being white.

You can turn the speakerphone off and on as many times as you like during a call.

There are other speaker-related features on the iPhone. For example, you can start calls through Speaker using Siri. In addition, in the settings you can make sure that Speaker is always on by default. All these features are very convenient when you need your hands free.

If you didn’t know how to use a speakerphone before, now you know how easy and convenient it is.

Function speakerphone in the phone was relevant earlier in the absence of connectivity wireless headsets However, this function is still used today.

You will need

- your phone number.

Instructions

If you need to turn off the speakerphone while talking on mobile phone, find a button in the menu (usually the top left) labeled “Hands-free”, various shortcuts are also possible, click on it and switch to normal mode conversation.

Be careful, the speakerphone can also be turned off using the menu item you used to turn it on, so you won’t be able to quickly switch modes.

If you need to turn off speakerphone in your landline phone, use the button specially provided for this on the phone keyboard, usually it is located in the lower right corner of the digital part, however, there are different variants. Usually it is marked with a special inscription or icon with a corresponding pictogram. Sometimes switching modes also occurs when you press this button for several seconds.

To turn off the speakerphone in the car using wireless connection With mobile device via Bluetooth, use disabling the device from the phone menu, or from the player settings, disabling the phone in its menu. Actually this type communication has nothing to do with speakerphone, just sound, transmitted by signal into the phone, heard from the car speakers. This is also available for other devices using a Bluetooth connection.

note that this function recommended for use in cars to avoid creating emergency situations related to driving while talking on the phone, and in some countries this is the only legal way making calls for vehicle drivers. The principle of operation here is approximately the same as in a regular wireless headset.

IN this review we'll talk about settings panel in Galaxy S4. Android 4.3 installed.

There are two ways to get into it:

Method No. 1: swipe across work area screen with your finger from top to bottom, after which we will see the main panel consisting of 5 settings, in order to see all the settings (and there are already 22 of them), you need to click on the icon in the upper right corner (a white icon with 3 squares and 2 arrows ).

Method number 2 (fastest): swipe 2 fingers from top to bottom on the working area of the screen and we will immediately get to the settings menu. Everything is very simple??

We see something like the following picture, depending on what settings you already have active:

Let's look at it in order:

1) WiFi- here I think everything is clear. By clicking on this button, we turn on Wi-Fi on our smartphone and connect to the Wi-Fi network we need.

2) GPS. By clicking on this button, we activate the built-in GPS receiver, which we need if we use applications that need data about our location.

These are navigator programs, for example Maps With Me Pro, Navitel, etc., maps from Google and Yandex. Unnecessarily, you shouldn’t keep it on all the time, because... this causes the battery to drain faster.

3) Sound. Has 3 modes (on, off, vibration mode).

4) Rotate the screen. Turning on this option, we can rotate the smartphone and the screen image will rotate with it. This is convenient, for example, when watching movies.

5) Bluetooth. Enables built-in Bluetooth on your smartphone. Using it, you can transfer files, pictures, themes, etc. to another phone that also has Bluetooth enabled.

6) Reading mode. Optimizes the screen for reading (simulating the mode of a regular paper book). Only used with a few specific applications.

7) Mobile data. Enables mobile data transfer mode, turn on the Internet from your mobile operator. Eats paid traffic, unless you have unlimited traffic of course??

8) Blocked mode. When you enable this mode, notifications for the selected features will be disabled. You will only receive notifications for calls from people on your white list.

9) Power Saving Mode. Enables energy saving mode.

10) Multiple windows. On the left of the screen, click on the white tail from the panel, the panel will open and drag the right application up or down. The screen will split into 2 parts.

11) Screen Mirroring. Screen mirroring function. Using it, you can duplicate the image of your smartphone screen onto your TV.

12) Wi-Fi access. The feature allows the Galaxy S4 to work in hotspot mode.

13) S Beam. Allows sharing different types content (contacts, photos, videos, etc.) between several smartphones using NFC technology. To share files, you need to place two smartphones close to each other and touch the screen and file transfer will begin. Works in conjunction with NFC.

14) NFC. Allows you to exchange files and information using NFC tags. For example, pay bills, connect to SMART-TV TV, enable some smartphone functions, etc.

15) Guidance. The function allows you to activate elements on the screen in preview mode without touching the screen with your finger, but only by bringing it closer to the display glass.

16) Gesture control. Allows you to perform many functions using gestures: receive calls, switch audio tracks, switch to another tab in the browser, flip through an image in the gallery, etc.

17) Hands-free mode. In Android 4.2 it was called "driver mode". Includes smartphone speaker and SVoice capabilities. Allows you to control your phone “hands-free” by sensing voice commands, a convenient feature, especially when you are driving a car. Includes for sharing GPS.

18) Intelligent anticipation. This is when the screen is on while you are looking at it.

19) Intellectual pause. This is when the video recording pauses if you look away from the screen.

20) Smart scrolling. This is when, after detecting eyes, the screen scrolls depending on the tilt of the device.

21) Synchronization. Synchronizes your accounts.

22) Offline mode . In this mode, you can turn off calling, messaging, and data features. Other types of communication, such as Wi-Fi and Bluetooth, will also be disabled.

Problem with speakerphone automatically turning on during a call
Added (1). I gave it to the warranty company and they re-flashed it, and as a result, after a few days, the same garbage happened again, but only for 3 hours, now everything is fine. It's something with usb contacts because it finishes them off and the phone thinks that a car headset is connected to it... Although it may software part guilty.

komex

Same stuff! And it started out of nowhere! There were no updates, no settings changed.

I had the same problem, and after launching the Locations application, and in the "phone" application instead of the icon phone book The GPS maps icon appears. Passed after rebooting the phone

Jessy

Hi all! Just don’t use your smartphone as a navigator (there should be no icon in the status bar) and uncheck the “turn on the speakerphone by flipping…”
helped me. I suffered for a week.

This happens to me all the time - I plugged in my headphones - made a call with headphones - it went away, today it’s being original again - the headphones don’t help anymore... Overload too... It’s brutal... I want to smash it against the wall...

Even flashing the firmware didn’t help me, I tried official and custom ones 5 times, but nothing helps! I formatted the memory card in the card reader and voila, a day has passed and everything is fine, try again

+1, I had the same crap with my phone, I decided to first move the downloaded games from the card to the phone memory and format the card. I moved it, exited the menu, wanted to format the card from the phone, but checked, everything was gone. It became the same as before, I didn’t even format the card. Everything disappeared when I transferred the information to the phone memory. So try this way

Stem

Htc desire s, the speakerphone turned on when calling, and periodically, location. I did the following: I cleaned the usb (charging) socket with a sharpened wooden toothpick from the side of the thinnest distance, that is, opposite (on the other side) from the five contacts

Everyone, good day! It's just terrible, please help me figure out the problem. It doesn't matter whether it's incoming or outgoing call, always on. Speakerphone, but that's half the trouble, now the screen also turns over. I turned everything off, deleted everything, there are no programs, everything has already been cleaned! What to do, who would know!

I'll look at how many of us there are. It's a shame, the phone doesn't cost five cents, but works like Chinese garbage. I have Htc desire s, everything is the same, location starts on its own, after which on in.|out. Calls are turned on speakerphone. It's scary as hell. Cleaning, unchecking and spells from the book of VOODOO do not help! Today I see only one way out - Slam it against the wall and go get a new phone!

The problem is quite common. Very often the source of trouble is the USB (charging) connector. An intercontact short circuit in it leads to the fact that the device believes that something is connected to it. external device and reacts accordingly
Solution - if cleaning does not help, then replace the connector at any service center.

Cleaning the USB connector with alcohol and a piece of paper folded in three helped. I cleaned both the connectors themselves and their back side, where it is difficult to get into.

Cleaning the microUSB connector helped. And before this, I also had this kind of bullshit, I suffered for a day, nothing helped. And with the help of a sharpened toothpick I cleaned the connector, but at the same time I turned off the device and took out the battery, flash drive and SIM card. I assembled everything, turned it on and it worked!
However, the USB storage device did not work when connected to a PC.

I encountered this problem twice. Helped various options connecting/disconnecting to a computer and connecting/disconnecting GPS, navigator programs, as well as removing the battery and SIM card. This is some kind of glitch in the system when using the phone as a navigator!

All you have to do is clean the connector and that’s it.

Comrades! USB cleaning really helps!

All these shamanic dances with a tambourine don’t help!

Cleaning USB with safe mode They really helped, I really suffered for 2 months. Phone Wildefire S. Danke Sean everyone on "tambourines"

Cleaning the charging connector helped, but not the first time

Nothing helps

Cleaning USB, and just with regular wood. And reboot after that. And voila)

I have the same bullshit HTC desire SV... I cleaned the USB and it's been a whole day. So far the flight is normal. But really, until I found this thread, I just wanted to ritually burn it! And now the glitch is gone and I love it

Cleaning will help! Checked!

Thanks, I'll try...

Also HTC, the speakerphone also started to turn on. Cleaning the usb didn't help, formatting the flash drive didn't help, nor did a system rollback. Replacing the SIM card with someone else's helped, made a test call, everything was fine, then I installed my SIM card - the problem disappeared.

The problem is that the phone turns itself on for a couple of minutes and turns itself off. This continues until the battery runs out. What about him?

I had the same problem, and after launching the Locations application, I deleted Last update There were no problems with this program even after rebooting the phone

28.07.2015
Cleaning helped! Thank you!