How to open the router settings page. How to enter the router settings, and what to do if the settings do not open

A router (also known as a router) is, according to Wikipedia, a specialized network computer that has at least one network interface and forwards data packets between different network segments, connecting heterogeneous networks of different architectures, making forwarding decisions based on information about the network topology and certain rules, specified by the administrator. In simpler terms, we usually use a router to create a network between computers, as well as so that they have the opportunity to access the network. True, this mostly applies to offices. At home, the router connects to one computer and actually works as an Internet Wi-Fi device.

In order to properly configure the router, you need to use its interface. Many users don’t even know how to get into this very interface. This is exactly what I want to talk about today. By the way, this issue is active on the pages of the site, but I decided to include it in a separate article. So to speak, for convenience.

For my example, I will use the D-Link Dir-300 router - this is one of the most common models on the market, so I decided to write an article specifically around this device. But in fact, it’s not so important what brand your router is, be it TP Link, ASUS, Zyxel, Upvel or any other. They all work using the same algorithm, which means there will be minimal (if any) differences in the procedure I am describing.

Instructions for use

The first step is to plug the device into a power outlet. Then on its back wall we find a panel for connecting wires.

We take the included cable (usually blue) and insert one end of it into the network card on your computer or laptop, and the other into one of the LAN ports on the router (not Ethernet!). Now on the device itself, in addition to the POWER LED, the LED with the inscription LAN should light up. It is possible that your LEDs are not marked, this is not so important. The main thing is that we have just established a physical connection between the computer and the router.

Now open your favorite browser on the computer itself. It doesn’t matter what kind of browser it will be: even Mozilla, even Opera. You must enter the router's IP address in the address bar. You can find it on a sticker on the router itself (usually it is located on its bottom panel). For example, the address could be 192.168.1.1 or 192.168.0.1.

If for some reason you cannot find this sticker, no problem - use it. Click on the “Start” button, in the “Search programs and files” line, write the word cmd (without quotes) and press Enter. A command prompt will open. Type the word ipconfig and press Enter. You will see various options. Among them you need to find the “Main Gateway”, opposite which the very IP address you need will be located.

So, we figured out the IP. We enter it into the address bar in the browser and press the Enter key. A window will appear in front of you where you will need to enter your username and password. If you don’t see anything, for example, a blank page opens, then you entered the wrong IP address. Look at it in the way that I described just above (using the command line). If you can't do this, you can use another method. Go to the control panel, select “Network and Sharing Center” there. After the page opens, on the left side you will see an inconspicuous link “Change adapter settings” - click on it. Then select your connection, right-click and click on “Status”. Network status information appears. Click on the “Details” button and look at the IP address located opposite “Default Gateway IPv4” - this is the address we need.

But we got a little distracted. Finally we got to the settings panel, or rather, to its main page. Here you will need to enter your username and password. This data is needed so that no one can enter the control panel of the router and change the settings.

There are unlikely to be any problems with the login, since it is usually the same for everyone - admin. But you can struggle with the password. The fact is that if it was changed by someone, it will be possible to get into the router settings only either or with the help of the person who changed the settings and, accordingly, changed the password.

If the password has not been changed, then you can find it on your router - exactly in the same place where the IP address for entering the panel itself is located. To be honest, the combinations are usually extremely simple:

• Login: admin, password: 1234.

• Login: admin, password: admin.

• Login: admin, password: password.

• Login: admin, password: 12345.

• Login: admin, password: not used.

Try one of the combinations, it might work for you. If the data turns out to be correct, then you will be able to appear in the router panel and change the settings as you wish.

Hello friends, in this article I will answer in detail the question - how to access the router settings. This question may arise for several reasons: You bought a router and decided to configure it yourself so as not to waste time and money on a specialist, or you changed your provider and want to reconfigure your favorite router to the new Internet.

First of all, to answer the question - how to enter the router settings, we need to connect our computer and router via cable. We are looking for a wire crimped on both sides with plastic chips, which comes with the router (patch cord). Next, accordingly, we turn on our computer and router by connecting it to power.

Then we insert one end of the wire into the network card and the other into one of the LAN ports on the router, do not confuse it with the WAN (Internet) port. If the router is working properly and the port is intact, then the indicator light opposite it will light up, indicating that a physical connection to the router has been established. Why do we use a connection via a wire, and not the wifi itself, precisely because, unfortunately, not all routers allow you to connect to them via a wireless network during initial setup. And in order not to suffer, it is better to immediately connect via wire.

Find out the IP address of the connection to the router

The next step in answering the question - how to enter the router settings - will be to find out the IP address at which we need to connect to the router. Typically, for most models of all routers these are the following addresses: 192.168.0.1 or 192.168.1.1 . We enter these addresses into the address bar of your browser (the program through which you view Internet pages, for example Google Chrome, Opera, Mozilla FireFox, Internet Explorer).

If you don’t go into the router settings at these two addresses, then there is a way to find it out manually. To do this, go to the “Start” menu, then to “Control Panel”.

Then we look for “Network and Internet” and go to this section.

Click on “Network and Sharing Center” and then click on the menu on the right “Change adapter settings”.

We have all your network connections in front of us. We look for “Local Area Connections”, right-click on its icon and select “Status”.

Then click on the information button and here is our desired address, it is called “Default Gateway IPv4”, and it should be entered in the address bar of the browser to connect to your router.

Entering a password to log into the router

The third and final point in the answer to the question is how to enter the router settings - this is authorization to the router control panel. If you followed the steps correctly before this step, a window should pop up in your browser asking for your login (User Name) and password (Password). Enter the username and password specified in the instructions. If there are no instructions, then try entering the standard login - admin (or with a capital one). We either try to leave the password blank; on some models there is no need to enter a password, or we enter the standard ones: admin, 1234, password, 123, 12345 and others.

Resetting the router to non-factory settings

If the standard passwords do not work or you have forgotten the password, then you need to reset the settings to factory defaults. How to reset your router? - you ask me. For this we need a pen or a toothpick. Next, take the router and turn it around with the back side where the ports are, look for a small hole with a button called “Reset”.

Thanks to the ability to connect via Wi-Fi, as well as using a network cable, routers provide comfortable access to the Internet on various devices. But to start operating the router, the Internet connection is established directly in the settings of the router itself.

Wire connections

For the router to work properly, you need to connect the appropriate wires to its connectors. These sockets are located on the back of the router and have one common standard, so connecting cables will not cause you any difficulties.

• The first thing you need to do is connect the power cord of the device.
• The next step is to connect the cable that provides Internet access. The connector for it is called “Internet” and, as a rule, is highlighted in a different color or is located at some distance from the other inputs.
• To fully access the router settings, you must connect your computer using a wired connection. To do this, you need a regular LAN cable, which comes with most routers. To connect the cable between the router and the computer, use any of several LAN connectors, indicated on the router with the corresponding abbreviation.

Turning on the router

To turn on the router, depending on the manufacturer and model, use the corresponding button or switch on the back panel of the device. Some routers do not have such a key and turn on immediately after connecting the power cord.

Actions on how to enter the Wi-Fi router settings

All that is required to enter the settings menu of your router is a username and password. If you don’t know them, manufacturers always indicate the factory settings on the back of the device: login is the login to enter the menu, and password is your password. In most cases, the word admin is used as the login, and the password is either not used or is similar to the login. In addition to the name and password for entering the router’s settings, the router’s network address is also indicated on the back panel. In most routers, the address is 192.168.1.1 or 192.168.0.1. In order to enter the settings, you need to open your browser and enter the specified address in the address bar field. After this, you will be redirected to the router menu login page, where you need to enter your username and password. Access to the router settings allows you to make changes to individual parameters, change the Wi-Fi password, and also to access the router settings. As a rule, router settings are divided into appropriate categories. Despite the fact that the interface of many routers is translated into Russian, there are some models for which only English is available.

D-Link input

Entering the settings of a d link router is practically no different from the methods of accessing the parameters of routers from other manufacturers. The only difference is the router’s IP address; to access the settings menu, you must enter the address 192.168.0.1 to enter.

Login for Asus

Logging into the settings of your Asus router is carried out as on other devices, the peculiarity is that the login and password have the same values ​​- admin.

Login for TP-Link

How to enter the settings of the TP link router? The parameters for accessing the settings of TP-Link routers are identical to the standard settings of Asus routers. Therefore, to access the interface, enter the address 192.168.1.1 and use the admin value for the Login and Password fields.

Reset

For cases where incorrect Internet settings have been entered or you connect the router to another provider, it is possible to reset the router settings to their original settings. This way, you can receive the router settings as they were when you purchased it. Also, users quite often forget the settings access password after changing the factory password. By resetting your device, you can reset your settings and use standard passwords to access your router settings.

There are two ways to reset your device to factory settings:

• The first method involves resetting the settings programmatically; it is performed through the router’s web interface. This method is only suitable for users who have access to the device menu. If you need to reset your password, it is recommended to use the second method. A software reset of the router in the English version of the interface looks like “ResetFactoryDefaults”, in the Russian version it is more often found as “Reset to factory settings”.

For TP-Link routers, this parameter is located in the “System Tools” section. Just select the “Factory settings” option and click on the “Restore” button. After this, the router will reboot within a minute.

To reset Asus routers, you need to go to the “Administration” settings section and click on the “Restore” button next to “Factory settings”. To restore the settings, the router needs to reboot.

The settings of routers from the manufacturer D-Link are reset to their original settings using the “Factory settings” function in the “System” section of the interface.

• The second method involves a hardware reset of the device. Restoring settings is done by pressing the special “Reset” button, usually located on the back of the router. These buttons, like other types of equipment, are located in a special recess that protects the button from accidental pressing. Therefore, to reset the settings, you will need a fountain pen or pencil, with which you need to hold the button for 6-15 seconds until the indicators on the front panel light up or blink. After downloading, the router settings will be set to default.

Important! After resetting the settings, you will need to reconfigure your Internet connection in the router settings.

Video: Setting up the TP-Link TL-WR743ND router as a wired router

Firmware installation

Router firmware helps not only increase the functionality of the device, but also solve some operational problems. It should be immediately mentioned that unsuccessful flashing can lead to complete failure of the device. To reduce possible risk, firmware is performed only using a cable. There are many unofficial firmwares for various models, but in order to avoid damage to the router, it is recommended to install firmware provided only by the device manufacturer. Unforeseen situations such as a power outage during router firmware can also lead to irreversible consequences. Therefore, during firmware installation, you should connect the device and computer to an uninterruptible power supply.

To perform the flashing itself, you need to perform a number of simple operations:

• download and also check the new firmware for your device. Firmware of various versions is available for download on the websites of router manufacturers.
• Reset the device to factory settings.
• disconnect the internet cable from the router.
• open the web interface and go to the firmware update section.
• Some models have an automatic search for the firmware file; to update such a device, you just need to follow the instructions that appear on the screen.
• if your device does not have this function, then you will need to manually specify the location of the new firmware.

During firmware installation, you should never turn off or reboot the device. After completing the operation, a message about successful firmware installation appears, you must reboot the router.

New Password

To change the access password to the device’s web interface, you need to go to the router settings and select the appropriate category; for TP-Link this section is called “System Tools”. To change your password or login, you must enter your current password and click save.

To change the wi-fi password, you need to go to the wi-fi network settings section (wireless network mode). In this section, you can set a new password for the wi-fi network, and also select the type of protection. There are 3 key encryption options, each of which has its own level of protection, the most recommended type is WPA/WPA2, which provides the highest degree of security for your router.

How to get through the browser if you forgot your password? Unfortunately, to enter the settings menu you need a login and password, which can only be restored if you have a saved backup copy of the router settings. To view passwords from a backup, just download the RouterPassView program. There are several standard password options, perhaps one of them was set for your router:

• empty line,
• "password"
• "12345"
• "admin".

If you changed the password earlier and cannot remember it, then the only solution is to completely reset the router to factory settings. After the reset, you can use the standard login and password to enter the settings.

Hi people! Today one person asked me, how to log into the router? I immediately realized that he meant the admin panel of the router.

In this case, there are many nuances due to which you will not be able to log into the router, as well as its settings. To find out the answer, read on. Nowadays, many offices and apartments have more than one computer. And to connect each of them to the Internet you need a router. In some cases, there may be only one computer (laptop) in the apartment, and the router is connected so as not to constantly compete with the Internet cable. Personally, I also have a Wi-Fi router at home. And I only have one laptop, but I can easily go out onto the balcony with my laptop and drink a cup of morning coffee, as well as watch the news. In many cases, to connect to a router, you must enter the connection settings from your provider. And here comes the question - how to log into the router.

How to log into the router

In order to log into the admin panel of the router, you should enter the special address of the router in the address bar. You may see error 651 when connecting to the Internet; read the link to find out how to fix it. In standard cases, these are addresses such as:

Will you now say that these addresses do not work for you? I’m sure you will say) And all because someone before you changed this address to theirs (if you bought a used router). But this is not necessary either. In order to go into the router settings, you should reset all default settings. To do this, you need to press the small button labeled reset, which can be located on the back panel of the router or at the bottom. More details in the picture.

Please note that you don’t just need to press the button, but hold it pressed for 5-10 seconds. To understand when to release it, you will see that the indication (lights) on the router will go out and then light up again.

In some cases, the admin address of your router may be written on a sticker located on the bottom of the router. This is what the sticker looks like

As you can see in the picture, it contains not only the address with which you can access the router’s web interface, but also a login with a password that you will be asked to enter. By default, the login and password to log into your router is admin. Sometimes it is enough to enter only your login, but you do not need to enter a password. In general, try it friends!

That's all, now you know how to log into the router as well as in the web interface of the router. I also advise you to read how to strengthen the signal of a wi-fi router in your home or office.

In addition, we provide maintenance services for computers and office equipment. Our company's engineers will pay close attention to your equipment so that it is always in working order and does not cause trouble.

And if a PC problem occurs, we repair computers.

Still have questions? - We will answer them for FREE

Instructions

The procedure for setting up the router itself is quite simple. But many people have a problem finding the window where to enter these settings. There are no special programs that would be an attachment to the new router. In this case, it would be enough to install them on the computer and then perform all actions through it. But unfortunately there is no such program. Therefore, often attempts to set it up on your own lead to such a result that a computer specialist is called to your home, for whose work you will need to pay. There are only two ways to change your router settings.

First, you need to decide why you need to go into the router settings. Fortunately for many, this most often has to be done in only two cases. When you just bought it and you need to do the initial setup when connecting, or when you decide to change the provider that provides you with Internet services. If in the first case there were no settings before and you need to enter them, then in the second case the settings from the provider simply become irrelevant and you need to enter new data.

Before you start making settings, you need to connect the router or computer correctly and be sure that the connection works correctly. To connect according to all the rules, you will need a computer or one that has a working network card, a router and a cable, which is usually included with the router. If you don’t have a network cable, you can purchase one at any computer store. You will need a network cable with an RJ-45 connector. Connect your computer to Wi-Fi using a cable. There is more than one connector, but you need to connect via the “Ethernet” or “Internet” connector. Connect your router to the network via the power connector and click the “Turn on” button.

Now you need to perform some manipulations on your personal computer. The steps are quite simple and do not require any additional knowledge. You need to move your mouse to the lower right corner and find the monitor icon with an Internet connector, this icon is called the network status icon. Right-click on it (on some computers you can simply left-click) and select the “Network and Sharing Center” menu item. In the window that opens, in the left side menu, select the “Change adapter settings” section.

Find exactly the connection that is used to operate your router with your computer. Right-click on it and select “Properties” from the menu that appears. A separate properties window for the connection we are interested in will open. Select the “Network” subsection. You will see a list of marked ones used by this connection. You need to find only one item from the entire list: “Internet Protocol version 4 (TCP/IPv4)”. The protocol properties window for the requested Internet version will open. In it you need to check the box in order to receive an IP address automatically. In addition, you must also obtain the DNS server address automatically. So don't forget to check the box there too. Next, just press the “Ok” key so that the changes in the settings are saved.

To access the router settings, you can try using any Internet browser installed on your computer. In this case, the router must be connected to a computer or laptop with a network cable. In the address bar, enter the IP of your router, which is indicated in the instructions that came with it. Although different routers have different nuances for entering the settings menu, almost all manufacturers set the same addresses for the router. For example: 192.168.0.1; 192.168.1.1; 192.168.1.253.

Next you need to enter your username and password. If you have not changed these parameters, then for all manufacturers they are approximately the following: login – admin, password – admin; login – admin, password – leave empty; login – Admin (with a capital letter), password – leave empty. Some models may have different data. They should be indicated in the instructions for the router. If the login and password are correct, you will be taken to the main page of the router, where all the basic settings are made.

If you don’t have instructions for your router, you can look up your login and password on the router itself. On the bottom panel of most devices there is a special label with basic information. In addition to the router model number and power type, you will see the “default settings” item. This is data for standard settings, where the router’s IP address number, login and password information are indicated. If the label is missing or has been removed, then there is another way to find out the information you need. You just need to go to the network connection information section and find the item where the default gateway is IPv4.

You will need

• Computer
• Router
• Internet browser
• Keyboard

Instructions

In the address bar of your Internet browser, enter the IP address of your router a, which is indicated in the instructions for router u. As a rule, all manufacturers router ov these addresses are the same. For example: 192.168.0.1; 192.168.1.1; 192.168.1.253.

Enter and . If you have not changed these parameters, then for all manufacturers they are approximately the following: login – admin, password – admin; login – admin, password – leave empty; login – Admin (capitalized), password – leave blank. Some models may have different data. They must be indicated in the instructions for router u. If the login and password are correct, you will be taken to the main page router and where all the basic settings are made.

Video on the topic

Sources:

• How to enter the router settings, how to enter the router settings

You can configure or view its status and statistics using a regular Internet browser, such as Internet Explorer. To do this you need to enter the address router and in the same way as you enter Internet page addresses.

Instructions

Open your browser and enter the address in the address bar router Yes, you can see it in the instructions. For example, common models have the following addresses:
D-Link: http://192.168.0.1
Beeline and TRENDnet: http://192.168.10.1
Netgear, ZyXEL and ASUS: http://192.168.1.1

In the window that opens, enter your username and password. The standard login and password are specified in the instructions router A. The following standard settings are typically used:
D-Link: login - admin, leave password blank
ASUS, TRENDnet and Beeline: login – admin, password – admin
Zyxel: login - admin, password - 1234
Netgear: login - admin, password - password

If the standard settings have been changed, then enter a new login and password. If this data is unknown to you, then reset the settings router and the reset button, which is located near the antenna, and enter the standard login and password.

note

If you reset the router using the reset button, you will have to reconfigure your Internet connection.

Sources:

• Description of setting up routers on the Beeline website

On a local network in which several devices will simultaneously access the Internet, it is better to use a router or router. Naturally, we are talking about a Wi-Fi router if you also need to connect laptops to it.

You will need

• - Wi-Fi router;
• - network cable.

Instructions

First, purchase a Wi-Fi router that is compatible with your ISP. Check to see if this network device has a WAN or DSL connector. Connect the router to AC power and turn it on.

Connect desktop computers to the LAN connectors using network cables. Turn on one of these computers and launch your browser. Open the instructions for your Wi-Fi router and find the standard IP address of this device. Specify the login and password values ​​that must be entered to gain access to the router settings.

Enter the IP address in the browser field, fill in the Login and Password fields. Now configure the operating mode of the Wi-Fi router. Open the WAN menu. Set the required values ​​for the data transfer protocol type, enter the data required for authorization on the provider’s server and select the operating mode of the DHCP function. Save the WAN menu settings.

Now open the Wireless Settings menu and configure your wireless network. Specify its name, select a strong data encryption type. Specify the specific type of radio signal if required.

Now go to advanced settings. Activate the Firewall and NAT functions. Open the routing table and change the routes for some ports if necessary. Typically, Route Table is configured independently only when it is necessary to provide access not only to the Internet, but also to the intranet resources of your provider.

Save all changes to your Wi-Fi router settings. Reboot this device. Wait until the router connects to the Internet. Now turn on the mobile computers and connect them to the created access point. Make sure that both types of networks have Internet access. Check the ability to exchange information between networks.

If for some reason your device stops performing its functions properly, you need to change its operating parameters. First you need to clarify the correctness of the specified parameters.

You will need

• - network cable.

Instructions

Sometimes, after a power outage or a sudden surge in network voltage, some routers may stop functioning properly. This is due to a glitch in their settings. Turn off any connected to the LAN connector. Launch any - and open the settings menu router. To do this, enter its IP address in the URL field of your browser.

Immediately go to the Status menu. View the connection status with the server. The problem may not be in the settings router, and in the properties of computer network adapters. If the connection between the network equipment and the provider is not established, then go to the WAN menu.

View the active options in this menu. Be sure to check the correctness of the entered data in the following items: Login, Password, DNS-address. Make sure the DHCP feature is enabled. Save the WAN menu settings.

Reboot your . Wait until the device boots up and connects to the provider's server. Open the web interface of its settings again and go to the Status menu. If the router has gained access to the Internet, but computers still cannot connect to external resources, then open the Route Table menu.

Reset all routing table fields to zero. Re-register the required gateways. Be sure to check that the specified parameters are correct. Save settings Route Table menu and reboot the router again.

If after his computers have access to, but between devices within the network, then go to the WAN menu. Check that the NAT function is active. Check the Firewall function parameters. Remember that sometimes it is easier to follow the parameters router and rebuild this device rather than identifying the cause of the missing connection to the Internet or intranet resources.

Video on the topic

Wireless networks built using Wi-Fi technology are created to unite mobile devices into a single group. Typically, such networks are created in public places, offices or homes.

You will need

• Wi-Fi adapter.

Instructions

To be able to connect to a wireless network, you must have an internal Wi-Fi module or its external equivalent. All modern laptops have built-in adapters. If you need to connect a desktop computer to a Wi-Fi network, purchase an additional adapter that connects to the PCI slot of the system board or USB connector.

Update the Wi-Fi module drivers and turn on this device. Some mobile computers have a special key designed to control the wireless network adapter. If there is no such button, open the Device Manager menu. You can usually access it from the Properties menu under My Computer.

Find the “Network adapters” item and expand the list of installed modules. Right-click on the name of the Wi-Fi adapter and select “Enable” or “Enable”.

Now open the Start menu and select Network Connections or Net" Find the icon that says “Wireless Network Connection”, right-click on it and select “Enable”. Close this menu.

Left-click on the network connections icon located in the system tray. Select the desired wireless network. Click the "Refresh" button if the access point you are looking for does not appear in the list.

Click on the name of the desired network and click the “Connect” button. If the network is password protected, an input field will appear after a while. Fill it with the required characters. Click OK. Wait until the network adapter settings are updated after the connection with the access point is complete. Check the activity of the network connection. To do this, open a browser window and go to any web page.

Video on the topic

Wi-fi is becoming an increasingly preferred type of connection, both in public places and at home or in the office. It has two significant advantages that many users highlight from others, namely the absence of wires and almost universal access.

Instructions

If a computer or laptop comes within the coverage area of ​​a wireless network and is able to connect via wi-fi (at home, apartment, hotel, airport, cafe, park, etc.), it usually finds the network itself. You can understand this by activating the icon in the lower right part of the screen. It becomes brighter and shimmers slightly.

If , then Internet connects automatically. If this does not happen, try clicking on the icon and selecting “Wireless Networks” in the menu that opens. Typically, this will display a small list of wireless networks whose source is nearby. But most of them are protected by an access code, as indicated by the key icon next to the name. If you know the access code, enter it and the computer will do the rest.

If you assume that the network is free, but the connection does not occur, then contact an employee of the public place where you are. As a rule, such problems arise at airports, train stations, cafes, restaurants and other crowded places.

It happens that the computer was able to successfully log into Internet via wi-fi, but you still cannot get to the required email address. Try just launching your browser. A page with prices and payment methods may open. Please review them and contact the appropriate service to pay for access. This practice is often used in hotels.