R studio flash drive data recovery program. Data recovery using R-studio. Supports different file types and extensions

This program consists of several utilities that allow you to recover deleted information from various storage devices, such as USB flash drives and hard drives, with a high degree of probability. Data that has been deleted from the Recycle Bin or lost due to viruses or a sudden loss of power to the PC is subject to processing.

The program runs and operates successfully on various types of computers running the Microsoft Windows operating system.

Attention: a free program for data recovery from flash drives and hard drives R – Studio is available for download via the direct link at the bottom of the article.

It must be said that the program has great potential in the field of searching for destroyed files, as well as their further recovery. In the case where there is no damage inside the hard drive or there were not very many rewrite cycles, the utility is quite capable of bringing deleted files back to life.
The developers of this wonderful and highly sought-after software have increased the number of functions and opened up more opportunities for ordinary users of this system utility. Most experts advise using this software product for one simple reason - it is able to successfully work with most popular file systems such as FAT32, exFAT, NTFS, NTFS5, UFS1, UFS2, Ext2, Ext3, Ext4 FS, etc.

How to use R-studio correctly?

If you need to make recovering deleted files from flash drive, then first of all connect the flash drive by connecting it to the USB port of a personal computer or laptop. Next, we launch the program. On the main menu page you will be shown all active digital storage media that have been connected to the computer.

To continue, you need to click on the image of the flash drive, and then click “Scan”.
As a result, we get a window in which we should indicate the type of data that we are going to resuscitate. Select a memory area and activate the search for lost files.
Typically scanning occurs in a short period of time, which can vary from ten minutes to half an hour (it all depends on the power of the computer and the speed of the USB port).

After the scan is completed, the user is notified. Next, to view the found files, follow the prompts of the data recovery wizard, which will allow you to restore the found data on the flash drive.

Attention: at recovering deleted files you should specify a disk different from the one on which scanning with further recovery takes place. In this case, the probability of success of the operation to return lost files increases significantly.

However, it should be noted that the utility is not able to save the entire file. This situation occurs if a lot of time has passed since the data was erased or the media has been repeatedly rewritten. Therefore, the sooner you decide to launch the R-studio program, the higher the likelihood of success in finding and recovering deleted files.

Positive aspects of the utility

R–Studio works with many modern file systems. The function of developing a virtual disk array is supported. Information is restored in various situations (as a result of simple deletion or formatting (not to be confused with low-level formatting)). The program is able to search for files using specified masks. R–Studio can be used on various popular operating systems of the Windows family. The utility has a Russian version, which simplifies its use by the Russian-speaking category of users.

Shortcomings in the program

Most often, it is possible to return only graphic files (raster / vector graphics), text files, music compositions, and videos. The utility is not free, but in the free version it allows you to search for files up to megabytes in size.

The program is not used so often by the general category of users, so whether it is worth purchasing depends on the specific task and need. It is advisable for inexperienced PC users not to attempt file recovery on their own, but to contact appropriate specialists. This will protect against loss of existing data and increase the likelihood of returning previously lost information, although you can “practice on cats” and thus learn how to recover files deleted from the recycle bin.

conclusions

In general, the R–Studio program is very useful and necessary; it has come in handy for many users who have lost valuable information. Of course, the utility is not capable of returning data in the event of mechanical damage to a flash drive or hard drive (this is an expensive and special undertaking for highly qualified specialists), but this does not underestimate its already significant capabilities. Files are recovered even if disks are formatted or the file system is damaged.

Initially, R–Studio was developed for the purpose of being used by people working in computer repair services or experienced PC users. Beginners can be advised to use the R–Undelete program, which is a simpler analogue of the program in this category.

One day, R–Studio helped in returning a block of four disks located in a RAID array. More than 70 percent of the data was successfully recovered. I must say a special thank you to the programmers who created such a wonderful software product as R–Studio.

Advice: do not forget to make backup copies of especially important data from time to time, the loss of which will incinerate a large number of nerve cells. After all, this is what backup was invented for, to save nerves and time. As a last resort, the files can be encrypted and placed in the cloud for safekeeping.

We recommend this program for recovering deleted files from a flash drive or hard drive.

Good afternoon friends. How to recover deleted data from a hard drive? Each computer user constantly writes various information to hard drives, and, over time, deletes this information. The same applies to flash cards. Flash drives are designed to record and then delete information from them.

But what to do if you suddenly deleted information from a disk (flash drive), and you suddenly needed it? Or did you format your hard drive and remember that it contained the necessary information? What if you formatted the disk by mistake? What can be done in this case? In this case, it is possible to restore the information.

How does writing to disk work?

The fact is that when we delete information from a disk, we do not delete it completely. Data is written to disk in clusters (cells). They can be of different sizes. The most common clusters range in size from 18 (flash drives) to 8192 bytes (for some hard drives). For regular hard drives, the most commonly used size is 4096 bytes or 4K. The speed of transferring and processing information from the disk depends on the cell size. The larger the files you are going to write to disk, the larger the cluster size should be.

But, if you write small files to large clusters, the disk will quickly fill up, since you put a small percentage of the information in large cells. Therefore, before choosing the cluster size, it is advisable to think about what exactly you will write to the disk (disk compression works on a similar principle).

Also, there are various formats for formatting recording devices. For hard drives this is usually NTFS format, for flash drives FAT32. When a person deletes data from a disk, only the header is erased, not the contents. The content remains (information in clusters). At the same time, the system will show that the hard drive is empty. This is the same as erasing the titles of books, while the contents of the books remain intact.

The same thing happens with quick formatting. When erasing, the names of the files are deleted, but the data inside the cells remains. Then, during a new recording, the information in them simply changes. When we do Deep Formatting, information from the clusters is also deleted (although not always).

So, there are a number of programs that can restore this information from clusters. I have already written about the programs Disk Drill for Windows, Hetman Photo Recovery, Recuva. These are all excellent programs, but the one we’ll talk about today is more professional and recovers data more slowly, but, and this is most important, more thoroughly! Most often it is used by professionals, although it is quite simple.

How to recover data from disk

Recently, I was working with a program that misconfigured my hard drive D. It erased information about it. Namely, what is the file system of the disk (it had NTFS) and what is its type (primary, logical, unidentified). The system began to identify the drive as Unnamed D with an incomprehensible file system.

In other words, it was not the data about the files on the disk that was deleted, but information about it as a whole. At the same time, it was indicated that the disk was not formatted in any of the formats. In order to be able to work with the disk, it was necessary to format the disk, only after that the system would be able to recognize it. The disk contained valuable information.

Therefore, before formatting, the information from it had to be restored to another medium. In my case, to drive E. Having considered various recovery programs, my choice fell on R-Studio, which can more thoroughly recover data not only from a flash drive, but also from hard drives, while preserving their structure.

R-Studio 8.8.17 preparation

First of all, you need to go to the software sales site and select R-studio 8.x for Windows (if, of course, you have Windows). You can download free R-Studio in Russian, trial version. But, it can only recover 33 MB, which is very little. Install the program. During installation, select Russian language.

After installation, if your language is automatically installed in English, this is easy to fix. Go to the Help menu, then Change Language, then select Russian.

The program immediately shows all your disks that you have installed. Including flash cards and optical discs. Yes, R-Studio can also recover data from optical discs.

So, a window opens that shows all our disks, including the flash drive. If we select any disk, full information about it is displayed on the right. Its serial number, its size, how many sectors, how many blocks, etc.

But, I am interested in exactly the disk from which the superficial information was erased. This is drive D. The computer sees it, but does not allow anything to be done with it.

What do I need from this program? I need to not only restore all files, their types, programs that were on the disk. I need to restore its structure. Folders and files in the form in which they were before the loss of information.

For example, you need to restore the folder in which installed programs were located. I always installed programs on a separate disk (not on the system disk). Separately, a folder with video courses, with pictures. A folder with packed uninstalled software, and other folders on this disk.

Including all the subfolders that were in the folders. In other words, it is necessary to restore the disk structure to the way it was originally.

Of all the file recovery programs that I gave you above, only R-Studio was able to cope with this task.

How to work with R-Studio 8.8

So, I select the disk from which I want to return information and click “Scan”.

We are preparing for scanning. A window appears with two input lines. From it we can see where to start scanning and where to finish. In other words, if you know that your partition occupied 50 GB, indicate starting from 0 and ending at 50 GB. In my case, start from 0, end up to 360.28 GB, i.e. you need to completely scan the disk and see what R-Studio can find on it. I advise you to leave all file settings as the program suggests, click scan.

In the right window of the program we have a scan map displayed, similar to a defragmentation map. It displays where, in what part of the disk, what is located. These are various files, programs, etc. During the life of this disk section, various information was written to it many times and deleted many times. The scan map shows what is in which disk cell. The scanning process took me about half an hour.

Now let's look at the results that the program found. Of the sections that the program found, I am interested in “Recognized 0”, because it has a capacity of 360.28 GB, i.e., exactly the capacity of my disk. This is the section we need. All other sections are tiny, except for “Recognized 1”, which has a volume of 30.31GB. But it's empty for me.

So, click on “Recognized 0” to see its structure. Now we have started sorting and creating a structure of files and folders on the disk.

Now we see that R-Studio has created the disk structure that was before cleaning the disk, and placed it in the Root folder (root) specially created by the program. Don't be scared by folders and files marked with a red cross. This means the program was able to identify them. Interestingly, the program found many files that were on the disk much earlier, and which I deliberately deleted. The program found them too.

Now, our task is to carefully review all the folders, all subdirectories found by R-Studio. It is necessary to weed out unnecessary folders and files (some of the files previously refused to be deleted, they were marked as system files, but now it is enough to simply not restore them).

In the metafiles folder we see files that the program has sorted by extension. This is some kind of mixture of various pictures and other files from various programs that were on this disk and at least some of them were deleted. I don't need them, and I won't check them. You also don’t need them, so don’t check the box above this folder.

We mark those folders that we want to restore with a tick. Next, click “Restore marked”.

A window opens, in it, above the pink line, select the folder where we will restore all the found folders. For this purpose, I specially created a separate folder on another drive E. Please note that it is necessary to restore data to another disk (partition), because if you restore information to the same partition, the program may overwrite the newly recovered files .

We are starting to restore folders, which lasted about three hours. You even need to restore files that are closed by the system (the program will ask whether to restore the file?).

So, the restoration is complete. The Root folder was completely transferred with all the files marked with a checkmark.

Now, I format drive D in NTFS format and select a cluster size of 4096 bytes. After this, I copy (not cut) all the folders to the formatted drive D. After copying, I check the functionality of all programs and files transferred to the recovered drive. Only after this do we delete all duplicate folders from drive E.

After going through this process, I advise you to clean Windows and defragment all disks. The best defragmenter is Defraggler.

How to recover deleted data from a flash drive

After we were able to recover all the data of an entire hard drive partition, recovering data from a flash card will not be difficult. Let's launch the program. Mark the disk that you have as a flash drive. For me this is drive G. Click scan. The scan takes 20 minutes.

The program created the Recognized0 directory, which contains the Rood folder. Open it and view the contents. We tick the found files that we need to restore and click “Restore marked”.

Then, we select the location on the computer where we want to restore the files we are looking for from the flash drive, and restore it. Restoration complete!

Conclusion:— the R-Studio program is one of the best programs for recovering deleted data from a hard drive, and in general, from any storage medium, flash drive, or laser disk. It penetrates deep inside the disk and restores all the information that we have not yet managed to overwrite. Moreover, it restores structurally, which is very important in many respects!

Information for your information:— now many services charge from 10,000 rubles for the recovery of deleted information (depending on the value of the data being restored). So, friends, take advantage! With the help of R-Studio, you can make good money, without putting too much strain on yourself (the program will quickly pay for itself)! Good luck!

R-Studio is a package of applications for recovering deleted files. R-Studio is equally suitable for restoring local information sources (hard drives, flash drives, etc.) and remote machines. This program differs from many other programs for recovering files on HDD precisely in that you can recover files on computers over a network.

You can download the R-Studio program.

Supports many OS and platforms

The program is multi-platform: Windows 9x-Windows 10, server OS (2012 Server, etc.) are supported. Support for other operating systems, including Mac OS, Lunux, Unix.

Main features of R-Studio

The R-Studio resuscitator uses unique IntelligentScan technology. Many settings help you customize the recovery process, speed up the search for files, and at the same time increase the likelihood of finding deleted information. This is also facilitated by a recovery wizard and useful help in Russian.

Simple design and visibility of the restoration process

Traditional design in Explorer style. The program will be easy to navigate for novice users and convenient when performing file operations with recovered files.

Very often, recovery application developers make the process opaque. As a result, the user cannot control the recovery; everything is not obvious from beginning to end.

The R-Studio program, on the contrary, shows detected files, displays the file type, file system type and other information that will somehow help the user understand.

Remote recovery of information on hard drives. You can connect to the PC remotely and help with the problem. Moreover, you can restore files on another OS while being in Windows. The main thing is to gain access to the machine of the user who needs help.

Convenient storage of recovered information

Firstly, in R-Studio you can create a special list of recovered files for export. The user can also save the project file for later work with the files. There is no need to restart the process of recovering information from a disk or other file storage source. All settings and marks will be saved in the export file.

Wide list of supported file systems

• FAT12/16/32, NTFS, NTFS5 (for Windows and Mac OS recovery)
• exFAT, ReFS, Ext2/3/4FS (for Linux and other OS)
• HFS, HFS+, HFSX and UFS1, UFS2, UFS, etc.

Even if the file system type is not set (the so-called “raw format”), R-Studio allows you to detect a deleted partition or file table, correct raw formatting, and restore information.

Recovering compressed, encrypted disks, alternative NTFS streams.

Supports different file types and extensions

• recovery from hard drive, cd and dvd discs
• flash cards, USB drives, SD and microSD memory cards

If data has been deleted in a RAID array, you can recover some of the lost data in R-Studio. RAID6, RAID5 and RAID4 arrays are supported. In the settings, the user can manually specify the block size, save the configuration of dynamic disks for a given PC, etc. Also available is checking RAID integrity, block correctness, and reading RAID array parameters.

Creating a disk image for later recovery

As a professional product, R-Studio will be of interest to recovery specialists with its disk copying module. A disk image (clone) is useful when working with problematic hard drives, if there are bad sectors or read errors, which makes the recovery of information significantly slower or completely impossible in the usual way.

• Byte-by-byte copies of hard drive partitions
• Password-protected compressed disk images.

In both cases, the image can be easily mounted to a local or remote computer, then analyzed and recovered files.

Other options

• Preview of saved files before recovery. Creating templates and editing files in a HEX editor.
• Ability to save information on a remote machine or local PC. Very convenient if you are working with someone else's PC and want to demonstrate the result. It is important that the user has available space (a separate disk) on the remote PC.
• The R-Studio Emergency kit allows you to use a boot disk for recovery when the operating system is not working (for example, if the boot record has been lost or the OS has stopped loading due to the deletion of system files).

Other recovery scenarios using R-Studio

In R-Studio it is possible to restore files:

• deleted from the Windows Recycle Bin. Often, users empty the Recycle Bin, deleting files permanently. R-Studio quickly recover files, the chances of this are high
• damaged by a virus or after a power failure. Partially saved, damaged files are recoverable in some cases
• after formatting your hard drive, SD card or flash drive. If formatting was in fast mode, there are no problems at all. With deep formatting, the chances are minimal, but there are still opportunities - “on fresh tracks”.
• Damage to the file table and disk structure. As already mentioned, raw partitions can be restored, saved in a regular file system, corrected markup and found all files in their entirety, since they have not yet been overwritten.

Read, review of data recovery program – R-Studio. As a result of formatting a computer's hard drive or external hard drive as a whole, and not just one of the partitions, all partitions created on it are deleted along with the saved files. Most data recovery programs can recover from such a disk, at best, only a set of files, often with an unsaved name, without preserving the folder structure and directory tree.

R-Studio has the ability to recover data from a lost partition while preserving the folder structure and file names; let's look at how to recover files using it.

Let's assume that our hard drive had four partitions with files: D:, I:, F:, E:. This disk was formatted during the reinstallation of the operating system, and one partition was created on it.

To restore one of the deleted partitions using R-Studio, launch the program and select the hard drive from which you want to restore the partition, click the button "Scan".

If necessary, make additional settings in the window that opens and click "Scanning".

We are waiting for the end of the scanning process. Scanning information is shown in a kind of window on the right, which resembles the disk defragmentation window, as in older versions of Windows. Also, during the scanning process, the program calculates its duration; pay attention to the status bar at the bottom of the program window.

The disk scanning process lasted about 4 hours. As a result, R-Studio displayed in the window on the left a list of detected partitions of the scanned hard drive: existing and previously deleted. If you look at the list of detected partitions and compare it with those that were deleted from the disk (screenshot 1), you will not be able to compare them all by size. Therefore, if you need to restore a specific partition, you can find it by checking each one.

Let's look at the contents of a partition whose volume matches the previously deleted Disk I:.

As a result, R-Studio displayed the contents of this section, in which no files were found that were deleted along with it. The same result was obtained when checking other recognized sections.

As a result of scanning the existing disk partition “New Volume”, which was created instead of the deleted four, the program still detected files from the deleted partitions.

Select the files and folders that need to be restored and click the icon "Restore" in the top menu of the program.

Specify the folder to restore files and click the button "Yes".

Files and folders have been restored.

In conclusion, we can say that the program coped well with the task. And in terms of data recovery quality, R-Studio is a direct competitor Hetman Partition Recovery: also recovers files from deleted or formatted disk partitions, creates disk images and restores data from them, has an adequate preview function for recovered files.

Where Hetman Partition Recovery surpasses its competitor is a simple, intuitive interface, much higher speed of operation (both scanning storage media and data recovery), ease of use, the latest update added to the program the function of recovering data from virtual disks and virtual machine disks.

With Hetman Partition Recovery, it is possible to restore data in two or three steps, which greatly simplifies the data recovery process and only has a positive effect on its result.

Greetings, my readers, to . I'll start with a non-fictional story. At the very beginning of my career as a computer scientist, a rather interesting incident happened to me. A client who managed to rape Windows over the course of a year to such an extent that everything was slow and glitchy asked reinstall the entire system and, accordingly, all related software. Data says not needed- everything you need has been recorded on disks a long time ago, demolish everything- I don’t feel sorry for anything. The owner is Master, it’s even easier for me, there was only one section... I split the screw into sections, install the system, install the software, the client is happy, I take the money and leave.

That evening, the phone rings. I don’t know the number, I answer. There’s a tear-stained girl on the other end: they say you were with us today, you were working on the computer, there is coursework and half of the diploma, there are no copies anywhere(flash drives were wildly expensive back then). To say that I was surprised is to say nothing, the girl had such a brother who didn’t think that my sister didn't sleep at night- “studied”, but he did not consider it necessary to ask her if she had copies somewhere. In general, the story has a happy ending, all the data was restored, which is why this article was born: what is R-Studio and how to use it

I think you all have noticed that data deletion occurs almost instantly, but recording takes much more time. This is because the data on your hard drive are not physically deleted, the table of contents is simply cleared, and then new data is written on top of the existing data. So, if you formatted the hard drive, then the data on it are not completely destroyed and they can be restored at home with a 99% probability.

There are different data recovery programs from hard drives, but I will recommend you R-Studio. The program is paid and costs a lot of money, but it can easily be found on the Internet for free downloading on almost any torrent tracker. For those who do not know how to use a torrent, I suggest you read my article "How to use torrent".

Let's get acquainted with the program interface (Otherwise you won't understand the logic of R-Studio and won't figure out how to use it): at the top of the program there is navigation, the window is divided into three zones. On the left is a description of hard drives and other storage media, on the right are the properties of the selected media, and at the bottom is a log of operations.

Let's proceed directly to the recovery process itself. In the left panel of the program, select the section we are interested in (finding the one you need will not be a problem, even if it is not in the system, the program will find it), and press the button "SCAN"

Now we need to select scanning options. If you don't know what it is file system and what you had, it is better to leave everything unchanged, however, in the Windows environment, NTFS is usually used. Click "SCANNING"

The scanning process can take quite a long time, it all depends on performance of your hard drive and the amount of information contained on it.

Once the scan is complete, you will be prompted to view recognized areas on your hard drive, select what is most similar to your partition double click.

Here you can see the structure of files and folders that are located in the zone recognized by the program. We check the boxes that we need to restore and press the button "RESTORE MARKED"

Here again there are small settings: select the folder where the recovered data will be saved and click the “OK” button

We are waiting and hoping for the best...

Well, that seems to be all, now you can look into the folder with restored documents and check these files for functionality. No one can give you a 100% guarantee of recovery; there are too many factors that affect the percentage of success. Of course I recommend it to everyone make copies of important information to external media: disks, flash drives, external HDDs, but as they say, they don’t think about it until the roast rooster bites. But as a last resort, you know that there is such a program as R-Studio and you know how to use it.

That's all for today, good luck to everyone, if you have any questions, ask in the comments.

In contact with