Menu
homeAndroid

Program for scanning Canon MF 3010. Installation and configuration of the Canon i-SENSYS MF3010 printer. Practical use of MFPs

By downloading files to your computer, you agree to the Canon License.

Windows 7/8/8.1/10/XP/Vista

Size: 16.8 MB (x32) 19.1 MB (x64)
Bit depth: 32/64
Links:

Installing the driver on Windows 10

Before starting installation, disconnect the printer from your computer. Next, you need to download the Canon i-SENSYS MF3010 drivers - archive on this page. After this, open the downloaded file and a new folder will be created in the folder where the archive is located, which you need to go into. Next, go to the folder “Drivers” - “Russian” - “32bit” (if you download drivers for a 64-bit system, then you need to go to “x64”). There is a "Setup" installation file that you should run on your computer (open this file).

After the above procedure, the driver installation file will launch. In this window you need to click “Next”.

At this stage of installation, you are prompted to read the license agreement. Click "Yes" to continue the installation process.

Installation completed successfully. Click the "Exit" button. If your device is not yet connected to the computer, then now you need to connect your printer to the USB input of the computer and turn it on.

At this point all actions are completed, you can check the quality of the device. You may need to restart your computer if the device does not work.

Drivers are special software, regular updates of which allow you to avoid various failures and allow your computer and other equipment to operate as correctly as possible. If your i-SENSYS MF3010 printer has stopped functioning normally, it's time to update its drivers. In 9 out of 10 cases, the problem will go away.

How to install the driver

Downloading a driver for the Canon i-SENSYS MF3010 printer and installing it yourself is one of the simplest tasks that will not cause difficulties even for a user with minimal PC skills. To do this, you should adhere to the following recommendations:

  1. It is necessary to install the type of operating system and its bitness.
  2. Then download the required file from our website by left-clicking on it.
  3. A window will appear on the monitor in which you will need to select a specific location to save the driver. If this does not happen, the file will be automatically saved to the Downloads folder.
  4. After the download is complete, you need to start the installation process. To do this, click on the downloaded software.
  5. Another window will appear in which you should read the terms of the license agreement and accept them. If you do not confirm your consent, the driver will not be installed.
  6. Then you will need to click on the “Install” button, which will start the automatic installation process of the required software.
  7. In a few minutes the driver will be installed.

The whole operation takes no more than 2-3 minutes. However, it is worth noting that for the installed printer software to work correctly, the computer must be restarted.

Our website contains not only drivers for various printer models, but also other software for computers and laptops. Don’t forget to update it periodically, because this simple action allows you to avoid various failures.

If you are the proud owner of a Canon i-SENSYS MF3010 printer, you should worry about its correct connection to the PC, as well as the correct installation of the appropriate drivers. Without performing such manipulations, unfortunately, your MFP will not be able to please you with high-quality work.

How to install and configure the Canon i-SENSYS MF3010 printer yourself.

It's good when an experienced user purchases the Canon i-SENSYS MF3010. It will be absolutely easy for him to independently understand all the nuances that arise when working with multifunctional devices. It’s a different matter when installing a Canon i-SENSYS MF3010 printer is necessary for a beginner who is not familiar with any of the technical issues related to such a device. We recommend that such beginners carefully read the instructions, which are necessarily included in the kit if the Canon i-SENSYS MF3010 is purchased at a retail establishment.

If you have been offered to purchase an MFP secondhand at a tempting price, do not worry if after purchase you do not find the user manual that is so important to you. We will help you navigate the steps associated with installing and configuring the MFP, after which the printer will be able to please you with high-quality work.

If you purchased a Canon i-SENSYS MF3010 MFP, for it to work correctly it is important to initially fulfill two basic requirements:

  • install drivers correctly;
  • install the refilled cartridge.

You cannot ignore installing a driver for an MFP, since the driver is a special program that allows you to control the device and send print jobs. Accordingly, each printer comes with its own specific driver. Otherwise, by installing the wrong driver, it will be impossible to communicate between the computer and the printer.

Driver installation

So, understanding that the driver is the most important tool for ensuring reliable communication between the PC and the MFP, first of all, after purchasing the device, the user must install this special program.

Most often, the driver is included in the package, so it is enough to review the contents of the package and find the disk stored in it. In very rare cases, a printer may be sold in retail establishments without such a disk. However, in these cases, the manufacturer does not forget about its customers; it displays the corresponding drivers on its official website. Drivers can also be found and downloaded from other sources on the Internet.

Before directly downloading the installation files, it is recommended to restore in your memory the information regarding which operating system is installed on the PC. At the time of selection, users will be offered several options for downloading archives, suitable for:

  • for Windows 7 or Windows 8;
  • 32 or 64 bit system.

When visiting some resources, you just need to enter the printer model, and the built-in plugins will automatically detect your operating system and its bit depth. After this, they will immediately offer you a file to download. Most often, drivers are downloaded in an archive, so before using them further, first unzip the archive.

Now disconnect your printer from your computer, go to the folder where you unzipped the driver. In this folder you will find a Setup file with the extension .exe. Double-click on this file to activate it and start the installation process. Now the installation wizard window will appear on the screen. As a matter of fact, you should obey the recommendations of this wizard, do everything he asks and click the “Next” button.

When the wizard approaches the final stage of installation, it will definitely instruct the user to connect your device to the PC. Connect the printer to your computer using a USB cable. This completes the driver installation, and the printer will be ready to perform tasks. Sometimes you may need to restart the operating system for all changes to take effect. If such a request is received, do not be lazy, restart your computer.

Instructions for installing a printer without a disk

If the kit does not include a disk with drivers for the Canon i-SENSYS MF3010 MFP, beginners do not know how to install the printer, so they begin to be at a loss. In fact, the printer can be installed even in the absence of drivers, without the need to first search and download them in advance.

To use this method of installing an MFP, first connect the printer to your computer. After that, click on “Start”, on the right side you will find the line “Devices and Printers”. The same line can be found by going to the “Control Panel”.

In the “Devices and Printers” window that opens, you will easily find the “Add device” button, click on it. Next, the installation wizard will determine all the printers that it is ready to connect. All you have to do is click on the printer that you are currently trying to connect.

After completing these steps, a new window will open in which you will be asked to install drivers from the disk or continue their automatic installation. Of course, you must click on the “Next” button; in this case, the wizard will independently find the necessary drivers and install them.

Setting up the MFP

After successful installation of the drivers, your printer is ready to use. Now you can print, scan, and create copies on it. If you do not yet have practical experience working with MFPs, you do not yet know how to scan, then it is useful for you to read the Canon i-SENSYS MF3010 instructions, which indicate how to scan any documents. We'll also help you understand how to scan using the Canon i-SENSYS MF3010.

We focus on what changes to the settings can be made to ensure maximum results.

Practical use of MFPs

Once your printer is ready to use, you can print a test page. You can also print any document you have previously created. A properly configured printer will flawlessly perform all the tasks you specify.

You can also not immediately send the document for printing, but initially go to the “Properties” of the device. In this window, you can change the factory settings and orient the MFP to perform actions that are important to you at a particular moment:

  • printing multiple copies at the same time;
  • printing not the entire document, but a separate fragment or certain pages;
  • choosing a specific sheet format;
  • choosing a different page orientation;
  • setting different levels of print quality.

While most users can still print, not everyone previously had to scan. For this reason, initially, when the need arises to scan documents, some users experience stupor. They do not understand how such actions are carried out. In fact, the scanning process is simple; just read our recommendations or the corresponding section of the user manual.

So, if it is important for you to start scanning documents, go to “Start” and go to the already familiar “Devices and Printers” menu item. After the main window opens, you will find listed printers that are ready for use, select your MFP, click on it once so that it is highlighted. Now, just below the address bar, you will see a menu bar with several options.

You need to find the “Start Scan” option, click on it and the automatic process will start. Another window will appear in which you, as the user, can make some changes. However, such changes do not need to be made initially, at the initial trial stages. Click on the button below “Scan”, and the device will perform the tasks you set for it.

As you can see, the scanning process is also simple. Copying documents is even easier; just place the document, close the top cover and press the corresponding button located on the body of the MFP itself. Finding such a button will be easy, since it is accompanied by an icon that shows two copies of the document, and there is also a corresponding name below this icon.

ADVICE. If for some reason the multifunctional device refuses to work, you should check the quality of its connection to the computer. Very often the problem occurs due to a slight detachment of the USB cable.

In addition, the problem may arise against the background of a viral intervention. Viruses often leave behind negative traces, including seriously damaging drivers. In this case, you will have to reinstall the drivers to restore normal operation of the multifunction device.

So, installation and subsequent configuration of the Canon i-SENSYS MF3010 multifunctional device is not accompanied by difficulties if the user followed the recommendations, became familiar with the algorithm of actions and, relying on them, carried out all the manipulations.

Driver for Canon i-SENSYS MF3010 printer. It is unified and contains a print driver and a scanning driver. This is convenient for owners of this MFP - there is no need to download and install drivers separately. The developer has added support for all versions of the Windows operating system. The driver installer supports the Russian language and does not require any complex settings, just follow the installation instructions. Once the operation is complete, the installation program will ask you to connect the printer to your computer.

Also on the download page you can find the Tool Box program, which is designed for processing scanned images. The program has a very simple interface and allows you to send images by mail, save them to files on your hard drive, and also transfer scans to other programs for further processing. In particular, you can transfer the image to a text recognition program or create PDF documents.

The Canon i-SENSYS MF3010 is a multifunctional device that is well suited for home and small offices. The functions of this MFP include black and white printing, copying and scanning. Document printing speed is 18 pages per minute. The device has a striking, all-black design. Moreover, the dimensions of the device allow it to be placed on any table. As mentioned above, its performance is sufficient for home needs or the needs of a small enterprise. Installing and connecting the printer will not be difficult for an untrained specialist.

ID of the equipment for which this driver is intended:

  • USBPRINT\CanonMF3010EFB9
  • CanonMF3010EFB9
  • USB\VID_04A9&PID_2759&MI_00