Menu
homeWindows 7

Setting up a local network via a router. How to create a local network between two computers

If there are several computers or other gadgets (tablets, phones, laptops) in the house that have the ability to connect to the Internet, the question arises of how to create a home network through a router with the ability to transfer data between all devices.

To connect all devices to each other, you need a router, which will serve as a communication point. If you don't know, you can read it in one of my blog articles. Communication between the necessary equipment can be organized either via a wired or wireless connection; modern routers can use both types of connections.

In order to create a home network through a wifi router, it is necessary to take into account that the wireless access point must be located in the center of this network and form a so-called “star” when all devices are connected. The Wifi router connects to the Internet via a cable provided by the provider and automatically distributes it to all devices connected to it.

It is also possible to do without a router. However, this method is more labor-intensive.

The wireless connection point has a “WAN” (Wide area network) port, which means it is connected to a global network. And the rest of the devices connected via cable are included in the local/home one and, accordingly, are connected via wire to any connector labeled “LAN” (Local area network). On most routers, there are four data ports, which allows you to connect four computers via a wired connection. If it is necessary to expand the number of “LAN” ports (there are cases when four are not enough), then it is possible to use network switches. Using a network switch model with 8 ports, you will increase the number of connected devices by 6 pieces, since one port on the router and one port on the switch will be occupied by connecting to each other.

In addition to a wired connection, the well-known wireless network can be used to create a private network; the combination “WLAN” is usually used to designate it.

If you have a fairly large apartment area, then when connecting devices via Wi-Fi, a disconnection may occur due to a very weak signal in remote parts of the room. In this case, I suggest using or using

Having chosen the type of connection, based on the capabilities of your devices and personal preferences, a so-called home network is organized through a router, allowing you to organize data transfer. However, in order for everything to work harmoniously, you need to make some more settings. It will be described below , how to create a home network via a wifi router on computers and laptops. You can read about connecting tablets and Android-based mobile devices in another article.

Create a workgroup for your home network

First, we need to create a working group that will include all the computers on our network. To do this, follow the following path:

Start > Control Panel > System and Security > System

Click on “advanced system settings” in the column on the left, the “System Properties” window will open. The default name of your workgroup will be WORKGROUP, but you can change it by clicking on the “Change” button.

We carry out the same actions on all computers that will be connected to the access point.

Create file and printer sharing

If you do not perform these actions, then no matter what you share, access to this data will not be available. To do this you should follow the following path:

Start > Control Panel > Network and Internet > Network and Sharing Center

Several profiles will appear on the screen. Each profile must be shared and password protection disabled.

When you create a home network via a wifi router, be sure to make the same changes on all computers.

Access to folders and files

If we want to be able to work with the files of a user on another computer, we need to share the necessary folders.

On the folder for which we want to share, right-click and select from the pop-up menu Sharing >HomeGroup

After these simple steps, the folder will be open to all users of the workgroup.

I would like to note one more point: if you are unable to connect to any computer, be sure to check the settings of the standard and built-in firewall. It happens that there are different connections.

If the home network via a wifi router is created correctly, then after logging in you will see the computers located in your group and the shared folders and files accordingly.

That’s basically all the information on how to create a home network through a Wi-Fi router, but if you couldn’t handle the setup yourself, then leave your questions in the comments and I’ll try to answer them.

The main purpose of the router is to create an access point to Internet resources. A router serves as a connecting element for creating a home local network; an on-router provides the ability to connect peripheral devices located at home or office to the Internet provider channel. A home network via a wifi router is very convenient, modern and practical!

Let's look in detail at how to create a home network via a wifi router, and also consider the advantages of working with a home local network.

Benefits of creating a local network

A local network is usually understood as a group of devices connected to each other using two types of networks:

  • Wired type;
  • Wireless type.

Classic type - connection via cable elements. Today, this approach can easily be superseded by the router and wireless LAN.

Such a group of devices connected via LAN has advantages:

  • Possibility of direct transmission of information arrays– data and files between individual devices of the group. At the same time, there is no need to use physical storage media;
  • Uninterrupted and permanent access to Internet resources;
  • Creating a local network will also allow you to have access to all resources of any of the devices in the group. For example, it will be possible to easily carry out via a PC document printing located on a mobile gadget;
  • A local network via a wifi router allows you to organize single playing space, which will be useful for fans of online games.

What you need to organize a local group

The task at hand - creating a network through the use of a router - will require certain equipment:

  • Directly the router;
  • A personal computer, which will serve as the center of all subsequent manipulations;
  • Laptop or netbook;
  • Tablet computer or smartphone;
  • Printer
  • Other devices that support data transfer via Wi-Fi

DHCP

Before you do and implement your plan, it is important to make sure that the server is available and active DHCP: The protocol will allow you to automatically set network parameters for all devices in the group. In the tab DHCP there is a subsection "DHCP Clients List" in it you will see all the devices connected to the router. Of course, you can do without deploying DHCP, but in the absence of automatic address distribution, to connect to the router, you will have to set network parameters manually on each device.

Switch

Appearance of the D-Link switch

The router has ports on the side or back for connecting your devices. One of the ports is highlighted in color (usually yellow) and is intended for connecting an Internet provider cable; it is called the WAN port. LAN ports are intended for connecting devices. If there are not enough sockets to connect all your gadgets, you can purchase a special eight port switch. Then you connect the switch to the router, and then connect all your devices to the switch. Switches can be:

  • Megabit;
  • Gigabit (if you need a higher speed connection to the disk).

Learn more about creating and configuring a local network

So, how is a home network created via a router? Let's present all the required actions in the form of a list:

Before carrying out all the necessary manipulations:


To set up a home network correctly, as well as for its proper functioning, you need to provide shared access to certain folders or drives - the network through a router must be open for access of one technical device to another and vice versa. To do this, in the properties of the object - file, folder or disk - set general access and select the ability to write and read.

What's next: connection

Once the HomeGroup is ready, installed, and organized, it is recommended that you restart the central PC.

Now you can check whether everything was done properly. To do this, it is recommended that from another device of the created group, for example, a laptop connected to wi-fi, go to the “network management” menu and in the “home group” option connect to it.

Then, after entering the security password and carrying out the manipulations described in the previous paragraph - opening access to disks and files, folders - we reboot the laptop. Communication between the internal networks of individual equipment must become available. In this case, the required “bridge” between the computer and the laptop is built correctly.

What you need to connect your tablet or smartphone to your HomeGroup

To connect to a Home Local Group from a tablet or smartphone (which should preferably be able to install applications and run on the Android operating system), you will need to perform a number of steps:

Install the “ES Explorer” application on the device from which you plan to connect;

After installing the program, you need to connect to a wireless Wi-Fi network;

“ES Explorer” has an option (tab) LAN – access to your home local network. By accessing this tab, we initiate the search procedure;

The search result will display a list of computers available for connection;

By selecting any of the homegroups, you can safely access it and exchange data packets between your tablet or smartphone and your computer.

Checking connection and operation

To make sure the newly created home network is working, you can use two ways:

Go to “Network Neighborhood”. If all of the devices required for connection are found in the list that opens, then everything is in order;

Use command line and the command “ping + device address”. We build a chain of checks according to this command. If satisfactory results are obtained and responses are received from each of the home or workgroup devices (depending on the previously specified settings), the process can be considered completed normally.

Summing up

A competently and correctly built local group and, subsequently, connection, has a number of advantages compared to cable analogues from the past: this is not only a qualitatively new level of data transmission, but also ease and practicality of use.

We figured out how to set up a local network, how to organize communication between all the equipment located in the group we created on the central computer. The main nuances and subtleties of organizing this method of communication between home computers, regardless of their functionality, are also considered: both static all-in-one PCs and laptops, netbooks, smartphones and tablets can be connected. Access to shared data is open to any of the devices.

You, dear user, just have to carry out all the considered operations yourself and enjoy the technology and all the benefits of your new local group connected wirelessly.

Good afternoon.

For laptops, the most convenient and practical to use would be to create a wireless local network using wifi. Even a novice who turns on a computer for the first time can handle setting up such a local network between two laptops.

You need to follow these steps:

A local network between two laptops has been miraculously created, all you have to do is connect to it from the second laptop, not forgetting to enter the password.

tvoi-setevichok.ru

Wireless wi-fi network between Windows 7 laptops

Setting up Wi-Fi between two laptops is a pressing issue for entry-level users. Wi-Fi wireless technology is installed in almost all portable devices, and naturally the question arises: “If you can set up a Wi-Fi wireless network between two laptops for data transfer and communication, then why not take advantage of this opportunity?”

Indeed, a wi-fi network opens up limitless possibilities for wireless communication: you can exchange data and information between laptops, you can communicate and organize entire conferences, play online games and simply download the file you need from one computer to another. And all this without any wires! You can set up a wireless wifi network between laptops in a matter of minutes and use it repeatedly in the future. But first, let's look at what the word “wi-fi” actually means, and how this technology “freed us from the wires” that tied our hands and took up unnecessary space.

WiFi wireless network technology

Wi-Fi technology and wireless network was created in 1991 by NCR Corporation/AT&T. This product was originally intended for wireless data transmission of point-of-sale systems and was called WaveLAN. The maximum transfer speed was 1-2 Mbit/s. The creator of the Wi-Fi wireless network, Vic Hay, further participated in the development of international standards IEEE 801.11a, IEEE 802.11g, IEEE 802.11b, the maximum transmission speed of which was already 54 Mbit/s. Later, in 2009, a new wi-fi wireless network standard was launched - IEEE 802.11n, which could transmit information to devices with a similar chip at a speed of 600 Mbit/s. The development of wireless network technology did not stop at this limit, and literally in 2011 a new Super Wi-Fi standard was released, which supported IEEE 802.22 technology. Thanks to this wireless network technology on a laptop, it was possible to achieve a data transfer speed of 22 MB/s over a radius of one hundred meters, which was a real breakthrough in the world of portable devices.

What are the advantages of a wireless Wi-Fi network?

Thanks to wi-fi technology, a wireless network can be created both between two laptops and between other laptops, tablets, mobile phones and other devices that are adapted for this module.

Wi-Fi is the most common wireless network segment on the market.

Allows you to connect devices to each other free of charge and quickly, which significantly saves time and money on purchasing network cables.

A wireless Wi-Fi network between laptops is more than a hundred times more harmless than cell phone radiation.

How to create a wireless wi-fi network between two Windows 7 laptops?

How to create a Windows 7 wireless network between his devices will be useful to everyone, because similar settings will be used both when connecting computers and mobile devices with this operating system. Why are we analyzing OS Windows 7? The fact is that this operating system is fully adapted for all kinds of devices and encryption protocols, and is the most stable and easiest to set up a wireless wifi network between laptops. Thanks to the new technology in Windows 7, you can simultaneously connect to one network and monitor other wireless networks that are nearby. You should know that setting up a wireless network on Windows 7 laptops is approximately similar to other OS operating systems from Microsoft, for which special thanks to them. So, let's get down to visually setting up a wireless wi-fi network between two laptops step by step.

So... let's get started!)

1. When you turn on Wi-Fi on both laptops, you will immediately notice a notification in the tray that “There are connections available.” To configure it, go to the “Network and Sharing Center”.

2. When we go to the “Network and Sharing Center”, you need to select “Set up a new connection or network”.

3. After we see a new window open, in order to create a wireless network between Windows 7 laptops, you need to select “set up a computer-to-computer wireless network.”

5. Here, in order to create a wireless network between Windiws 7 laptops, we need to enter the desired network name, security type and password. You can come up with all these parameters arbitrarily, the only limitation is that the “wep” encryption protocol supports a password in the range of 5-13 characters.

6. Write down or remember your password, as it will be useful for further setting up the wireless network on the second laptop.

7. Turn on Wi-Fi on the second laptop and you will immediately see a notification in the tray that a new wireless network has appeared. Click “connect”.


That's all! Let's use it!)

Also in the attached video you can see the entire sequence of actions clearly.

www.netbooks.by

Create a Wi-Fi access point on a laptop

How to create a wireless Wi-Fi local network between two computers, a computer and a laptop, a laptop and any other wireless device: a smartphone, tablet, TV with an integrated wireless module without a separate wireless access point, quickly and easily?

In this article, we will describe “on your fingers” how you can create a Wi-Fi access point on a laptop with a minimum amount of computer knowledge “on board”.

At the very beginning of the setup, we will need a working, well-configured laptop with a Wi-Fi module. You can repair and configure a laptop of any brand in our company. All information on the website is at the link here. Before setting up, it is advisable to make sure that there are no viruses in the Windows operating system, since viruses very often make it difficult to work with wireless networks. Without leaving our resource, you can read about antiviruses, compare, then download and install the latest free antivirus. After installation, it is advisable to conduct a full or at least a quick scan of the system. This completes the preparation of the laptop - further tips on using this type of network and a description of the settings.

Let us determine the scope of application of this Wireless Local Area Network.

  • Typical situation No. 1: you have Internet via cable (home network, cable modem, like Cosmos TV) on a laptop with Windows 7 installed, but then a smartphone (iPhone, any tablet, Android) appeared and an urgent need to access the Internet via him.
  • Typical situation No. 2: you have files on a perfectly configured laptop that you urgently need to transfer to a Wi-Fi-enabled mobile device. It is possible that such a need arises regularly or periodically and you really need it.

For such situations, you can quite easily and simply adapt the wireless access point we created (Wi-Fi Hot Spot). So, further everything is just on topic.

To create a local wireless Wi-Fi network between two computers with the ability to access the Internet through one of them, which will be connected to the Internet via a LAN wire (regular network cable), you need to go through several steps. They are quite simple - the main thing is to understand the principle and strictly follow the settings.

  1. Stage - create a virtual network adapter on a Virtual Wi-Fi laptop, which will broadcast the wireless network and the Internet.
  2. Stage - setting up Internet access. We implement the principle of a full-fledged access point based on a laptop.

Stage 1

The first step begins with creating a Virtual Hotspot on a laptop that will become an access point and to which any wireless device can be connected.

To do this, run the cmd command with administrator rights. In the console that appears, type manually or copy the line:

netsh wlan set hostednetwork mode=allow ssid="MS Virtual Wi-Fi" key="Pass for virtual Wi-Fi" keyUsage=persistent

Where ssid is the name of our created network, and the key value is the password for the connection, choose it yourself (8 - 63 ASCII characters). For example, values ​​of type: erQ564U0. In our case, we get the following line, which we enter into the console:

netsh wlan set hostednetwork mode=allow ssid= "MS Virtual Wi-Fi" key= "erQ564U0" keyUsage=persistent

As a result of our actions, another wireless device should appear in the laptop - the Microsoft Virtual WiFi miniport adapter.

This is a virtual wireless adapter. It is created as a separate device for network broadcasting, since Wi-Fi technology does not encourage the use of one adapter for several purposes. So far our network has been created, but is in an inactive state.

Important: if a new wireless device called Microsoft Virtual Wi-Fi miniport adapter does not appear in Device Manager, then there is a problem with the Wi-Fi module driver - download and install the original driver. Otherwise the network will not work.

To activate our wireless network, we launch the console again using the cmd command with administrator rights. In it we enter the following values:

netsh wlan start hostednetwork

By analogy, to stop the network if necessary, type the command:

netsh wlan stop hostednetwork

It is better to format all these commands as bat files for quick launch as needed.

After launching our network via netsh wlan start hostednetwork, another Wi-Fi network will begin to be detected in our premises. You can check the presence of the network we created by going to the menu for searching and connecting networks, for example, a smartphone on Andoid OS (Settings-Network-Wi-Fi Settings-Enable WiFi-Wi-Fi Networks).

You can connect to it by clicking the “Connection” button in the list of available networks and entering the password that we set when creating the network. In our case it is erQ564U0.

Stage No. 1 is completed. The wireless software access point (SoftAP) with password protection is created and ready to use.

Stage 2

At this stage, we need to access the Internet through our laptop-based software access point. To do this, we will need to share (make open) the access of the wired LAN network adapter on the laptop.

This is done like this: Go to Control Panel - Network and Internet - Network Connections. We find the network adapter, in our case it is: Local network connection - Atheros AR8162/8166/8168 PCI-E Fast Ethernet Controller. Right-click on the adapter icon - Properties - Access - Check the box: Allow other network users to use the Internet connection of this computer. You also need to indicate specifically which adapter we are giving access to the network in the drop-down menu just below (Connecting a home network). Here we need to indicate our newly created virtual network. In our case, this is Wireless Network Connection 2.

Click the OK button to save the settings. The network should immediately begin distributing the Internet without rebooting. The network configuration on a laptop distributing the Internet should look like this - the network we created should have access to the Internet.

Important: the created network must be launched after each restart of the Windows operating system. Those. write netsh wlan start hostednetwork in the console. And this is tiring to do over and over again. To avoid this, you need to create a bat file (.bat) and display its shortcut on the desktop for maximum convenience.

It is possible that the Internet in such a network will work quite mediocrely, the speed may not drop, but the ping will increase, the network will most likely fail from time to time. It should also be noted that you can configure a wireless Wi-Fi router automatically using special software. As an option, in the future, for maximum comfort, you can buy and install a wireless access point using the example of installing wireless access for cosmos TV in Minsk.

hpc.by

How to create a network via Wi Fi?


How to create a network via wifi?

Local wireless Wi-Fi network is an innovation that is certainly useful. Here you can exchange files (and quite voluminous ones - such as movies, programs) and play games with your neighbor, especially since installing and configuring this network is not so difficult, now you will see for yourself! You just need a new working router, a modern computer and a network cable with working Internet. But before creating a network, remember that many antivirus software can significantly degrade communication quality by blocking some settings and processes.

How to create a local network between two computers via Wi Fi?

First, you need to go to the system properties of your computer and in the window that opens, enter the name of the new workgroup, and this action must be performed on all machines that plan to connect to the network.

Next, go to the “Start” menu, through the “Control Panel” we look for the “Network and Sharing Management” menu, then we determine what type our current network is and click on “Ready to create”.

Creating a working group

In the window that appears, click “Create a home group”, then we begin to select elements that will be open to computers from the same network space, set a password if necessary, and click “Finish”.


Create a home group

If you suddenly want to disable the password request, then you need to scroll through the previous window again, find the “Sharing with password protection” setting, select the desired disable tab, open the “General” settings tab and, finally, having found the previous item, finally disable password protection. When finished, be sure to click on “Save Changes”.


Password protected sharing

This completes the last stage of these network settings. Now all that remains is to restart all network computers, then go to “My Computer” and select the “Network” tab.

As you can see, the shared folder has equal access and can be used by any computer connected to the network.

AskPoint.org

Create a wifi network between laptops | Computer PEOPLE

create a wifi network between laptops

Many users, especially students, like to play games on laptops in pairs. Or there is simply a need to transfer files. For these actions you need a network between laptops. That is why today I am writing an article on how to create a wifi network between laptops. The operation is quite simple and quick to perform, but still not everyone knows it.

To begin, click Start -> Control Panel -> Network and Internet.


Now look for the Network and Sharing Center item and click it.
On the left side of the window there is an item called Manage wireless networks.
In the next window we see a lot of networks, but we don’t need them, we’re just looking for the Add button.
You have two choices, but ours is Create a computer-to-computer network.
Next, a window is shown that says what kind of network it is and under what conditions it will work. So just click Next.
In the next window we must enter three parameters for our future network: Network name (the name of the future network), Security type (you don’t have to change anything), Security key (password for your network, at least 8 characters). After you have entered everything, click Next.
Congratulations, the network has been created and now a window appears with a message that you have completed it.

The last step is the connection itself, and all that remains is to ask a friend to look for your network among the wifi points.

That's all I wanted to tell you today in the article How to create a network between laptops.

Connecting devices into a home network and connecting it to the Internet, at first glance, seems difficult.

But those who have done this at least once cope with the task in 20–30 minutes.

Do you want to learn how to create local networks quickly? So, this instruction is for you.

Creating a wired local network through a router

Preparation

To network desktop computers and other devices equipped with Ethernet network adapters, prepare:

  • Sections of twisted pair cable with 8P8C (RJ-45) connectors - one for each device. You can buy connectors separately and crimp the cable yourself. For a computer-router connection, a direct crimp circuit is used.
  • A router with enough LAN ports for all computers on the network. If there are not enough ports, some machines will have to be connected through an additional network device - a switch. Or via Wi-Fi.

The procedure for connecting devices to a computer local network:

  • Insert one twisted pair connector into the computer's network card connector, and the other into one of the LAN ports on the router. Find out exactly which ports are intended for the LAN from the instructions of your router.
  • If your apartment or office is connected to the Internet, connect the provider’s network cable to the WAN (INTERNET) port of the router.

Port activity is indicated by blinking LED indicators. The fact that the signal is being received by the PC network card is also indicated by the blinking of the diode in the connector area.

Setting up the router

Let's look at setting up a local LAN using the D-Link DIR 300 router as an example.

To open the control panel, enter the IP router into the address bar of your browser, which is indicated on its bottom or in the documentation.

Once connected, the network will appear in the Network Connections folder. If you wish, you can change its IP address and DNS server.

This is done in the same way as when connecting to a wired network, which we discussed above.

A local home network via a WiFi router opens up a wide range of possibilities for users of mobile gadgets and personal computers with the Internet. The user can set up such a network independently, even without deep knowledge in network management.

A Wi-Fi router allows you to organize wireless Internet at home, which you can connect to from several devices at the same time.

Since computers and laptops are no longer luxury items, anyone can buy these devices; many even have several personal gadgets. For ease of use, it is recommended to combine them into a local network (LAN).

A home local network has a lot of functions and allows you to share files, distribute Internet, play online games and much more. It's quite easy to set up.

What is a local network?

Figure 1. Changing adapter settings.

A local network is a group of devices, such as personal computers, laptops, printers, televisions, etc., united through interfaces via a specific data transmission medium (cable, radio channel).

The main benefits that the user receives by installing a local network:

  1. Direct file sharing. You can transfer photos, music, movies and other files between computers directly via LAN, without using external storage devices such as flash drives, disks, etc.
  2. Access to shared network resources. These include, for example, a printer. If it is connected to a local network, this allows you to print the necessary information on it from any computer on it.
  3. Organization of the play area. Video games often have an online mode that allows players to compete.
  4. Access to the Internet. Each device located on the home network can access the Internet if it is connected to one of the computers, shared access is allowed and configured.

Figure 2. Create a homegroup.

In a classic local network, the connection between computers is provided using a cable. However, in the age of portable devices and wireless technologies, the use of this connection method is no longer relevant.

Instead, it is proposed to build a home network through a WiFi router; it will be possible to include devices that support WiFi: tablets, smartphones and others.

They will also have access to all the functionality of the local network, for example, file transfer and Internet access, possibly with some restrictions related to the specific use of mobile devices.

What do you need for a home network?

So, the task is to create a network through a router. To organize it, it is necessary to provide the following equipment configuration:

Figure 3. Network location settings.

  1. Wi-Fi router with DHCP support. Must be connected to the Internet.
  2. Stationary personal computer.
  3. Notebook, laptop.
  4. Tablet, smartphone.

Before setting up a network through a router, you need to take several steps. First, you need to make sure that the DHCP server is turned on and active on the router. This network protocol is used to automatically assign network parameters (for example, IP address) to nodes connected to the router. Then it’s worth understanding the concept of “working group”. For security reasons, all computers being joined must belong to a single workgroup. This is necessary so that extraneous devices, whose inclusion in the network structure was not intended, are not able to use its resources and penetrate network nodes.

You can configure whether the system belongs to a particular workgroup by following the following path: “Start” - “Control Panel” - “System”.

Figure 4. Opening public access.

In the subsection titled “Computer name, domain, workgroup settings” you need to click the link on the right “Change settings”, then in the window that opens click the “Change” button (Fig. 1).

This window allows you to configure parameters such as computer name, workgroup and others. The workgroup field may initially contain the standard name Workgroup; instead, you can enter your own name, for example, Homenetwork.

In the same window you can specify a unique computer name. Then you need to restart your computer. This operation must be repeated exactly on all computers on the local network. The group name should be the same for everyone, but it is advisable to make the names different.

How to create a homegroup?

You need to create a local home network group - homegroup. You should follow the path: “Start” - “Control Panel” - “Network and Access Management”. The router, with the help of which a home local network is organized, must be connected and connected in advance.

Figure 5. Enabling password protection.

In the subsection of active networks on the right there is a line “Home group”, next to it you need to click on the “Ready to create” link, then on the “Create home group” button (Fig. 2).

It should be noted that if in the network viewing section the local network you are setting up does not have the home status, you can assign it to it by clicking on the “Networks” link (Network 5 in the figure). The network location settings window will open, where you can select one of three types (Fig. 3):

  1. Home network. It is designed that all nodes are known and safe, the user knows about all devices and completely trusts their work. Access is practically unlimited.
  2. Enterprise network. Optimized for office or corporate local systems.
  3. Community network. Serves for work in public public places where it is important to maintain the anonymity and security of each node. Computers in such a network are invisible to each other, which provides high protection against unauthorized penetration.

Figure 6. Connecting to your home network.

By clicking on the “Create a home group” button, you can select directories and devices that you want to open for public use (Fig. 4).

After applying these parameters, the system will generate a password. This needs to be recorded separately (or screenshotted) as it may be required for WiFi connection.

Otherwise, setting up a local network through the router will not be possible (Fig. 5).

How to connect to your home network?

After completing all the specified actions, the home group is considered created. It is recommended to reboot the device to fully apply the configuration. Since you need to set up a network for several computers, then you should definitely check the ability to connect different computers to the created homegroup. The second computer (for example, a laptop) must be connected to the Wi-Fi point of the router. On it, go to “Network Management”, look for the “Home Group” item, click on the “Join” button (Fig. 6).

Figure 7. Network setup for multiple computers.

After entering the recorded password, we repeat the setup cycle, specify the allowed folders and reboot the device. If the connection cannot be established, you need to disable all third-party firewalls and firewalls. When the connection is made, all network devices should become visible, access to resources and directories should be open.

By default, only a few special shared folders are accessible on your computer. But this is far from the limit of possibilities; it is possible to make almost any directory in the system accessible. To do this, you need to open the folder properties, find the “Access” tab, click on “Advanced settings” and check the box that opens sharing. We apply the parameters, the folder should become visible to other computers (Fig. 7).

Now let’s figure out how to get from your tablet to your computer using WiFi.

You can additionally include tablets and smartphones running Android in the created home network.

The ES Explorer application will help with this. After installing it, you need to connect to Wi-Fi. The program has a LAN tab (this is access to a local network). Once there, you need to click on the “Search” button. The application will find all available computers, and you can now log into each of them and view the contents of open folders.