Which thin stylus is suitable for a Lenovo tablet. What is a stylus for a tablet or phone

The design of mobile devices is changing rapidly. The advent of touch screens led to the disappearance of all buttons from phone panels. The new touch display now takes over their functions. For ease of data entry, a stylus for capacitive screens has appeared, which is easy to buy. These devices are offered in any store that sells accessories for laptops and other gadgets, for example, at aksmarket.ru.

Previously, a stylus for a phone was even included in the standard kit. Now that more advanced and reliable sensor responds better to hand touches; this accessory is optional. However, it still won’t hurt to buy an additional stylus for your phone. In most cases it turns out to be very useful. This is especially true in winter, when it is windy, cold and uncomfortable outside. You don’t want to take off your mittens or gloves to answer a call in this weather.

It's worth noting here that there are essentially two different types of touch screens. The resistive display includes a liquid crystal panel. On its surface there is a soft membrane, which plays the role of a sensor. It consists of two layers of plates, separated by a dielectric and coated on the inside with a specific conductive material. Electrodes are located along the edges of the structure. The quality of the display depends on their quantity. When pressed, the internal parts of the membranes are pressed against each other, and the electrodes determine the coordinates of the point of contact. For such a display you will have to buy a stylus.

Here's the touch screen capacitive type has a much more wear-resistant and reliable design. This is a layer of special conductive material applied to the glass surface of the screen. The electrodes are located at the corners of the entire structure. They apply a small amount of energy to the conductive material. AC voltage. As soon as a finger or a thin stylus for capacitive screens touches the display, a slight current leakage occurs. The system immediately calculates the coordinates of the touch point.

Nowadays, many companies produce stylus for tablet. It's definitely worth buying: it will definitely come in handy. Of course, you can completely do without it useful accessory. However, working in the cold, writing texts and especially drawing in different applications On capacitive touch screens it is much more convenient.

Probably, many smartphone owners are interested in how to make a stylus with their own hands. This is explained by the fact that such parts are again beginning to be increasingly introduced into many devices. Typically, these unique products come bundled with tablets or phones, but if they are lost, you will have to buy new mini-pens, and they cost a lot of money.

The easiest way to create a stylus

How to make a stylus for a tablet with your own hands? This process is very simple and economical because necessary materials Everyone has them on their farm. Thanks to the creation of such a part, it will become much more convenient to work with a smartphone. For the device to function effectively, it must be designed so that it can serve as a conductor of static charge between the fingers and the equipment display. Before you make a stylus for your smartphone, you need to prepare:

• thick aluminum foil;
• cotton swab;
• pen (ballpoint);
• scotch;
• scissors.

How to make a stylus yourself? To do this, you need to open the ballpoint pen and remove the rod from there. Then you need to take a cotton swab and cut it at an acute angle. After this process, you need to use the resulting element to replace the rod. You need to secure the stick using tape. At the end this stage You should take foil and wrap it around the handle a little higher than the cotton swab. It is recommended to wrap it tightly, after which you need to secure the upper part of the handle with tape. Next you need to moisten a cotton swab. After this you can start working. It is very important that your fingers touch the foil. This will allow static electricity to pass through, allowing you to interact with the screen. But such a homemade stylus has a small drawback: it requires periodic wetting of the cotton tip. Therefore, before creating it, you need to think about your convenience.

Stylus for capacitive touch screen with your own hands

You can make a stylus for capacitive screen with your own hands. To make it thin and easy to use, you must use:

• steel washer;
• aluminum rod;
• skein of thread.

If you have the inventory list at hand and are completely satisfied with it, then you can proceed directly to creating a stylus. To do this, it is necessary to solder the handle/rod to the washer at an angle so that it becomes as compatible as possible with the natural position of the human limb. But this design can scratch the display, and the thinner it is, the worse. This defect can be eliminated using threads. To do this, you need to wrap them around the ring-shaped edge of the device. To increase contact, you need to bring your finger close to the smartphone. Such a device does not leave scratches on the capacitive surface, and thin screen responds very quickly, so there is no need to press on the device. Also, if you make a stylus for a smartphone or tablet with your own hands according to this scheme, then you don’t have to worry about the appearance of marks and scratches on the screen. It's easy to use and can even wipe the display, keeping it clean all the time.

A large number of users of modern high-tech devices decide to abandon the keyboard and mouse. Such trends gave rise to the emergence of touch screens that can respond to finger touches, or a special convenient accessory called a stylus. A stylus for a tablet is a kind of thin pen that allows you to control a device equipped with a touch interface. This includes tablets and tablet computers. The stylus can be seen in the hand of a PDA or smartphone user.

Why “stylus”?

In general, where did this word “stylus” come from? It has Greek roots and originally meant a small stick that had a pointed end. It is these small “sticks” that today help users of high-tech devices in control. In addition, with their help it is very convenient to make drawings on a graphics tablet.

It’s curious, but some time ago experts predicted the end of the era of styluses. However, one can observe a picture where in the work the latest devices You still need a stylus. This is especially true for high-tech products. Samsung: styluses for Samsung tablets are in demand.

We've sorted out the history. Let's continue. It was noticed that a large number of users complain about the fragility: they say, the stylus for the tablet quickly becomes unusable. It is also noted that they are simply easy to lose. They came to the rescue special programs: some of them notify the owner that the stylus is on remote distance from a device such as a tablet.

How to choose a stylus for a tablet?

Are you a happy owner of a tablet and want to choose a convenient stylus? This is a laudable desire, because a properly selected device can greatly facilitate working with the device. So how do you make a choice?

There are some facts you should know about how this little accessory works. For example, styluses can vary in pressure pressure. Or rather, by sensitivity to this very force. In addition, styluses vary in weight, which can also play a significant role in its handling. You should choose one that is comfortable for you to hold in your hand! It is worth paying attention to the tip: size and shape can affect the work. If the owner of the device does not want to use virtual keyboard, then you should choose a stylus for your tablet that can work as quickly as possible and whose accuracy is very high.

For graphics

For execution graphic drawings good choice could become a Bamboo stylus. This stylus is for graphics tablet allows you to make light sketches and has proven itself well in handling. Yes, it is not without its drawbacks: for example, its tip is made of rubber. This means you have to press harder on the screen, and the tip itself tends to slip across the surface at times.

If there are no budget restrictions, then you can choose the Pogo Connect model, which has as many as 4 tips in its arsenal. It was noticed, however, that with the new Apple devices doesn't work very correctly.

DIY stylus for tablet

Among the users of high-tech devices, there are probably those who like to make things with their own hands. The next part of the article is dedicated to these people - how to make a stylus for a tablet with your own hands.

Some users have noticed that the blunt-tipped styluses that can be seen in some stores are not accurate enough. i.e. the work of such a device was not much better job finger. The user concluded that for good response The shape of the stylus should be pointed, for example, like a drawing pencil. This shape allows for very precise movements.

However, this form is not in the best possible way Suitable for capacitive screen. Users concluded that such a screen is oriented towards contact with an object that has a larger contact area than a pencil lead. How could this problem be solved?

A solution was found: the ring-shaped shape is well perceived by the sensor. In addition, you can easily view the center and see where you point the stylus.

Summarizing all the findings, you can make such a stylus: take an aluminum rod (conductor), a steel washer and a skein of thread.

The handle needs to be soldered to the washer at an angle convenient for the future stylus to work. You ask: “Why did you need a skein of thread?” To avoid scratching the screen. As noted, the ring-shaped edge allows for aiming through the center. And winding threads around it is not a problem.

Someone may object that threads worsen the level of sensitivity. In practice, everything works out quite well, because the sensor does not need absolute contact with the object to detect a touch. It was noticed that even when pressing with a finger, it was possible not to touch the screen closely.

Good day to you, dear Habro readers.

I would like to bring to your attention material that will, I hope, be of interest to handy enthusiasts. And it might even be useful to someone.

Some time after I became the owner mobile device with a capacitive touch screen, I had an obsessive thought that some actions are more convenient to perform with the help of a wonderful magic wand.

First of all, my research led me to a store where you can traditionally find such things. But to my disappointment, the blunt-ended samples that were available there aroused skepticism.

The shape and accuracy of the hit did not go far from the fingers, but the screen response was worse. The sensor picked up the touch only after slight pressure. The usefulness left doubts. I had to refuse the purchase.

According to my ideas, ideally the shape should have been pointed. Just like a drawing pencil, which can be used to make precise movements. But as far as I was able to find out, this shape is not suitable for a capacitive screen. Apparently it is oriented towards contact with a larger contact area, comparable to the touch of a finger.

Managed to find a couple interesting articles and a video on this topic - use the negative terminal of the battery and roll the antistatic film into a tube. Unfortunately, both options did not suit me. The battery is as thick as a finger. And twisting a tube every time may be convenient for some, but it’s clearly not for me.

Doubts arose about the feasibility of the idea. Due to the wide spot, it will not be possible to accurately direct the touch. And conductive material, usually metal, will scratch the surface of the screen.

As a result, a solution was found.

It turns out that the ring-shaped shape is quite perceived by the sensor and the center is also visible. Thanks to this you can see where you are pointing and hit.

The secret of the miracle wand is simple: a steel washer (any other conductive material will do), an aluminum rod (this should also be a conductor) and a skein of thread.

Thanks to a cryptographic analyzer, which, by the way, this time was used for peaceful purposes. Thanks to improvised tools from home tools, we get something similar to a dentist’s tool.

The handle needs to be soldered at an angle that will be as compatible as possible with the natural position of the hand and ensure that the plane of the ring is completely adjacent to the surface of the screen.

Of course, we could stop there, but such a design will scratch the screen and has no chance of getting a high rating from Habra readers :)

This problem was successfully solved with the help of... thread.

The ring-shaped edge is good not only because it allows you to aim more accurately through the center, but also because it makes it possible to wrap yourself with thread. Some doubters will think that additional layer threads will degrade the sensitivity of the screen. But that's not true. As you know, the sensor does not need absolute contact to detect a touch. It is enough to bring your finger very close. In this case, there may not be a touch.

In conclusion, I will say that I was pleased with the result.
- The reaction is the same as to a finger. There is no need to press.
- Does not leave marks, does not scratch and even wipes the screen.
- Accurate aim.

Working with the Android shell

There are also disadvantages
- Because the operating principle is based on the passage of current through a metal stylus to the human body. That is, it won’t work in parquets.
- On my communicator model the lower touch buttons(“back”, “menu”, “house”, “search”) do not work as well as we would like.

Typing text

P.S. Believe it or not, after all this was written and all the accompanying pictures/videos were prepared, I learned that one Canadian manufacturer is already producing styluses of a similar design. I found out about this when I uploaded the first video to YouTube and it showed similar videos. The idea turned out to be not new and I began to doubt whether it was worth sending this article to the public, as I might be subject to attacks related to accusations of plagiarism. Then I decided, since a similar solution was launched in mass production, which means the design is successful and all this was not invented in vain. Despite the fact that there was a coincidence of a good idea, it is still worth talking about :)

P.S. v 2. Some readers were interested in the suitability of the design in the winter conditions of our harsh regions. It turned out that in this case this device can be useful, although the sensitivity of course worsens. I tried it with the thickest gloves I had. If you squeeze the handle harder, the response gets a little better.

And another example of handwriting notes:

Friends, before you learn how to make a stylus for a tablet with your own hands, let’s first understand the principle of operation of this device. It is possible that during your study you will come to your own ideas for producing a product, which will differ from those presented below. So, let's figure out how this wonderful gadget works.

If you don’t have time, you can simply order a ready-made stylus in our store Zeon18.ru

Find out how to make a stylus for your tablet with your own hands, effortlessly and efficiently.

Modern touch screens are of the capacitive type. This means that it will respond to finger touches. Previously in touch devices There were resistive displays that found it difficult to recognize fingers, and they were powered by a stylus or long fingernails. It is worth noting that despite the convenience of using styluses, they were constantly at risk of being lost. If you've ever owned a smartphone or tablet that came with a stylus, you may remember how worried you were about losing this accessory.

• 1 Stylus or finger?
• 2 How to do it?
  • 2.1 The most popular “home” styluses
    • 2.1.1 From a cotton swab
    • 2.1.2 From a metal tube
    • 2.1.3 From a ballpoint pen
    • 2.1.4 Made from fluoroplastic
• 3 Let's summarize

Stylus or finger?

Please also note that for resistive screens, any means similar to a stick for entering information could be used. This trick will not work with capacitive displays. This is due to their design. We won’t go into details, but just say that to work on a capacitive display you need a conductor electric current. Because human body is excellent guide, then our fingers do an excellent job of entering data onto touch screen.

When Apple introduced the iPhone, in which the touch screen worked and responded to human fingers (capacitive display), then people began to think about whether they should buy a stylus if they don’t always have it with them? However, for some tasks it is convenient to use your finger on touch display is under attack, for example, if you draw on a tablet, it is very difficult to draw fine lines when you control your hands. This situation is familiar to many artists or simply those who like to draw, when instead of an elegant eyebrow a dense forest appears.

The lines drawn with the stylus are thin and graceful, so you can draw whenever you want

It turns out that there are still times when the thought is spinning in your head: “If only I had a stylus now!” But modern tablets and smartphones are practically not supplied with such devices in the kit. And here the need arises to additionally purchase this miracle of technology. What is the solution worth then? Apple, which produces iPad Pro and shows how it works with a special stylus Apple Pencil, which must be purchased separately. Naturally, this is the corporation’s disregard for its customers, who clearly do not want to pay more than nine thousand rubles for a stick that could be added to the kit of such an expensive tablet. So let's find out how to make a stylus for a tablet with your own hands?

How to do it?

What can you use instead of a stylus for a tablet? This question arises for many people who want to, for example, draw beautiful drawing on your device. Let's try to make a stylus with our own hands then! It's not very difficult, because there are so many ideas and methods for this. Please note that some materials may scratch the display, so only test on a screen with film. So, let's look at the most popular “home” styluses.

The most popular “home” styluses

From a cotton swab

The easiest option is to take a cotton swab and wrap it in foil. Swipe the screen and check its action. Make sure your fingers touch the foil.

A cotton swab and foil are all you need for your tablet pen
From a metal tube

Take a metal tube, for example, an antenna from an unnecessary radio receiver will do, and stick an antistatic sponge into it, which can be purchased at any radio market. Trim this sponge to give it a nice and pleasing shape. But make sure that it is not very thin, as the screen may not react.

With your own hands, you can create a wonderful tablet drawing tool that glides well and softly across the screen, evokes responses and leaves no traces behind.
From a ballpoint pen

If you need the lines to be thin when drawing, you will have to work a little. Take a regular ballpoint pen and wrap the tip in some soft material. You can tightly roll the paper with an antistatic film around it so that the contact area is sufficient. Now wrap the pen in foil so that it touches the foil on one end and your fingers on the other. You can start drawing! Please note that the rod must be removed from the handle.

The most basic rule, without which you won’t get a stylus, is the use of conductive materials
Made from fluoroplastic

And finally, let’s consider the most interesting and presentable option - a fluoroplastic stylus, which must be purchased in advance at the appropriate store. The purchased piece of fluoroplastic must be converted into appearance in a pencil. To do this, you can use a drill (fix one end of the fluoroplastic in a drill and rest the other, for example, on a stool) or twist the piece by hand. Simultaneously sandpaper you will need to move along the entire base of the material until it becomes round, that is, you should get a rounded stick. After this, wipe the surface with paper and remove all roughness. Then sharpen one end of the structure until the desired state a simple pencil sharpener, and then polish your stylus with fine sandpaper. You can come up with further manipulations of the stylus design yourself at your own discretion.

It turns out that this is such a pleasant and necessary thing that is always at hand

You can put this prepared piece of fluoroplastic in some pen if you want your stylus to look more elegant. Or you can make a full-fledged rod from fluoroplastic-4 and wrap it in any material you want: metal, plastic, wood, and so on.

Fluoroplastic glides well and does not scratch the screen

Let's sum it up

So, today we learned how to make a stylus for a tablet with our own hands, as well as some improvised tools that can be used instead of a stylus. We hope that everything worked out for you, and that you found the very structure that you could build yourself. Tell us in the comments what did you choose as a new device for entering information on your gadget?