Menu
homeTelephone

What program opens exe files windows 7. Download a program to open exe files

Hello everyone dear readers! The exe extension is an executable file; any installed program has this extension. Some users encountered an error when, when launching an application, a window was displayed on the screen where the system prompted them to choose which program to open this file through, and in some cases the system may produce other errors. In any case, if exe files do not open, there are several ways to solve this problem. If you don’t know what a file name extension is, you can read the article “”.

The cause of such an error is often caused by viruses, but there is also a problem with opening the executable file; the user who made changes in the registry may be negligent.

Solution

Method 1. First of all, check your computer for viruses and the question immediately arises: how to scan your computer for viruses if not a single program starts? Everything is very simple, you need to download the LiveCD (with built-in antivirus), then burn it to a CD/DVD disc and boot from it from under Bios. If you don’t have the Internet at hand, you can remove the hard drive and connect it to another computer as an additional hard drive and check it for viruses on another computer.

If exe files do not open after scanning with an antivirus, then try the methods below.

Method 2. If your computer has the Windows XP operating system installed. Download the file. We launch it, agree with the messages, click “Yes” twice. After that, we try to launch the programs.

Method 3. If the operating system is Windows Vista/Windows 7. Download the file. Open the file and make changes to the registry, agree, click the “Yes” button twice.

Method 4. Open “My Computer”, go to the C:\Windows folder, find the file svchost.com. Now you need to delete the file and reboot the system. After restarting the computer, go to the registry editor, Start-> Run-> enter “regedit” and click “OK”. A tree is displayed on the left side of the window, find the branch HKEY_CLASSES_ROOT\exefile\shell\open\command and check that the value is “%1” %* .

If programs still do not open, then one of the solutions is to perform a system restore using the Windows installation disk. If you have encountered such a problem, then write how you solved it, I will be interested in hearing from you. If exe files still do not launch in Windows 7, then watch the video below.

Be sure to watch the video:

You are here because you have a file that has a file extension ending in .exe. Files with the .exe extension can only be launched by certain programs. It is possible that .exe are data files and not documents or media, which means they are not intended to be viewed at all.

what is .exe file?

Applications and scripts are software developed for Microsoft Windows based systems consist of a file used to begin the process of initializing other developer files needed to run these programs, and these files are stored in EXE format. The content in the EXE file may contain code and reference data that can be used to locate and download files related to the developers included in the corresponding application. These EXE files and other software script program files can also be created for Microsoft DOS environments. These EXE files are attached with the .exe extension, and many Microsoft Windows applications use DLL (Dynamic Link Library) modules associated with the EXE file. Some EXE files are encoded and compressed as self-extracting archives of files and folders, which means that the startup EXE files will uncompress the archive and will save the files and folders in a pre-configured location, usually in the same directory where the self-extracting EXE archive file is stored, although in In some cases, the user will be prompted for a location to unpack and store the files and folders included in the self-extracting EXE file. There are applications developed as emulators for Mac platforms, and these programs can implement support for initializing and running these executables, and users of Linux based systems can use the Linux version of the Oracle VM VirtualBox software.

how to open .exe file?

Launch the .exe file or any other file on your computer by double-clicking it. If your file associations are configured correctly, the application that is intended to open your .exe file will open it. You may need to download or purchase the correct application. It is also possible that you have the correct application on your computer, but the .exe files are not yet associated with it. In this case, when you try to open the .exe file, you can tell Windows which application is the correct one for this file. From then on, opening the .exe file will open the correct application.

applications that open .exe file

Microsoft Windows Operating System

Microsoft Windows Operating System platforms mostly used files with .ANI extension, a graphic file format used for animated mouse cursors, which are also defined as Windows Animated Cursor. These files have the same functions with CUR file format or better known as the Static Cursor; its distinction is that being an animated cursor with the use of strings of images to show animation. The format is based on the Microsoft RIFF file format, which is utilized as storage for keeping the individual frames, which are typical Windows icons of the animation. This type of file is usually integrated in a customized theme for desktop, and is helpful to personalize the CPU system. Its final animation is designed with some icon frames are used for showing a single image after another to generate animation. Despite a number of frames using the icon format, part of the stored data in the animated cursor file handle the order of the step, length, title, and the author of the animation.

Parallels Desktop 7 for Mac

Parallels Desktop 7 for Mac

Parallels Desktop 7 is an application that allows guest operating systems to run on MAC. In other words, if users currently use MAC OS, but he or she needs to access files from Windows OS, installing this application would help because it treats guest operating systems as apps, so there is no need to reboot the system in order to switch to Windows OS. Parallels Desktop 7 gives users the ability to access different files and folders from different operating systems as well as it is even useful for developers as it allows the installation of multiple OS flavors. This application also features Lion feature support keys such as Mission Control, Windows full screen applications and Launchpad. Parallels Desktop 7 is known to be crash free and users are sure to experience no lag when switching from Windows to MAC. This version of Parallels desktop also has enhanced graphic performance as well as it also features remote control support for MAC via a paid-for app.

a word of warning

Be careful not to rename the extension on .exe files or any other files. This will not change the file type. Only a special conversion program can change a file from one file type to another.

what is the file extension?

A file extension is the set of three or four characters at the end of a file name, in this case,  .exe. File extensions tell you what type of file it is, and tell Windows what programs it can open. Windows often associates a default program for each file extension, so that when you double-click the file, the program launches automatically. Even though a program is no longer on your computer, you may sometimes receive an error message when you try to open the file in question.

ERRORS FIX .exe FILE ASSOCIATION

Find and fix file extension errors, registry issues, and quickly and easily restore your PC to optimal performance.

try Registry Reviver® Free.

Start downloading


Systematically, an inexperienced user encounters software problems, ranging from broken program files to complete control of the system by viruses. Today we should consider one of the most unpleasant and at the same time common problems when .exe does not open.

An Exe file is necessary to run almost all programs on a computer - it is a kind of executive element. Thus, if it does not start correctly, then you will not be able to access applications, which is a good reason to troubleshoot.

Why doesn't .exe open?

The problem arose due to one or more reasons, including:

  • You have been harmed by a virus;
  • You yourself changed the file processing program;
  • You made changes to the registry manually or using a reg file.

Either of these options may result in .exe files not opening. The problem often arises due to viruses running on the computer. The cause and root of the problem can be eliminated using several simple methods that will return the registry to its original settings.

There are other problems that may mislead you into thinking that the exe file is not opening. These include broken shortcuts, the activity of an antivirus program, etc., we will talk about this later.

Restoring the registry using a reg file

Files with the reg extension are packets of instructions that are imported into the registry, causing it to change. Essentially, these files perform exactly the same actions as manually editing the registry, but require significantly less time and are therefore a higher priority option.

You can use the file at the link https://www.oszone.net/user_img/090802193352/fix-exe.zip. Using it is extremely simple, unzip and run the element. When asked to make changes to the system, agree. After this, try running any exe file, its handler should be installed correctly and you will see the launched application as a result.

Restoring an association using AVZ

AVZ is a small program that will completely cover our need to restore system functionality. In addition to the fact that it can eliminate a bug with the association of exe files, it will also help you find viruses that are causing you to encounter the problem.

  • Download AVZ;
  • Run the utility from the archive, no installation required. If this does not work for you, then unzip the files, then run it from the command line, specifying the full path;

  • Click the "File" tab;
  • Select “System Restore”;

  • Check the box next to the first item and click on “Perform selected operations.”

The functionality of the program does not end there; you should also conduct a quick scan of the system for viruses and system problems.

Do it like this:

  • In the main program window, check the box next to the system partition and click “Start”;

  • Based on the type of threat and file, decide on the necessary actions to disinfect the file;
  • If that doesn't help, try scanning the remaining partitions.

Probably, due to the portability of the program, you may not have enough power of the utility's search robot. Then you can use another, complete program.

Restoring exe launch manually

Manual action will be a little more complicated, but it does not require installation or downloading of programs, and is suitable for a computer offline. Actions will be performed in the registry, so do not change unnecessary parameters, as this can have a detrimental effect on the stability of the system.

  • Press Win + R and type regedit;
  • Find HKEY_CLASSES_ROOT\.exe, the easiest way to find it is among a large number of sections by entering the name on the keyboard, only at a fast pace;
  • Right click on the “Default” value and select “Change”;
  • Replace the parameter with the word exefile;

  • Now in the same section, find the exefile group;
  • Open the "Default" option by double clicking and set the value to "%1" %*
  • Next, go inside to the shell section and then open;

  • Now again in “Default” insert the value “%1” %*
  • Restart your PC.

This series of actions allows you to achieve your goal and restore the association of exe files. You can do this with other formats in a similar way, but it’s better to use special utilities, like the previous one.

You should also know that there are severe variants of the problem when even the “Run” line does not work. Then press Ctrl+Alt+Del, then select “File” and “Run”.

Additional methods

Sometimes, the user thinks that his file association has been broken, when in fact some other equally pleasant changes have occurred. When opening exe files fails, a window is often shown that the program cannot use the data or Windows has not found a handler.

Perhaps the reason that your exe file does not start is that the path to it is incorrect. Typically, such failures occur if you deleted or changed the location of the file. Try going to the folder containing the program and check if it works.

Also, some “high-quality” antiviruses, if installed on a system that is quite heavily infected or even completely clean, characterize some or all exe files as viruses. In this regard, they may be deleted or added to quarantine. Then you need to configure your antivirus by whitelisting the file.

Using one of the utilities or performing manual steps, all programs should start in standard mode.

If you still have questions on the topic “Why doesn’t the .exe file start?”, you can ask them in the comments


if(function_exists("the_ratings")) ( the_ratings(); ) ?>

With help Resource Tuner you can open executable files such as .EXE, .DLL, .OCX, screensavers (.SCR) and many others. By opening the file, you gain access to the file's resources and can replace icons, cursors and graphics in various formats, change lines in menus, dialog boxes and other user interface elements.

However, it is worth keeping in mind that the resources in the executable file are separate from the program code, and by changing the program interface, you do not gain access to the program code. Using the resource editor, you can change program controls. The program code cannot be changed using the resource editor.

For more serious changes (which, however, will not lead to anything good without sufficient experience in programming applications for Windows), we recommend using PE Explorer (PE file structure editor) or FlexHex (hex editor for binary files).

Opening an EXE or DLL file in Resource Tuner

Supports multiple ways to open files. To open a file for viewing and editing, click the button Open File on the toolbar or select the command File > Open from the menu. The drop-down menu next to the button on the toolbar gives you quick access to a list of recently opened files. The same list can be obtained with the command File > Recent Files from the program menu. The number of files in the list is configured in the dialog Customize.


You can also open the file using Resource Tuner directly from Windows Explorer by right-clicking the file and selecting Open with Resource Tuner from the context menu.

Or you can simply drag and drop the file icon from Windows Explorer onto the Resource Tuner icon on the desktop or onto the window of the running Resource Tuner.

You can also open the file from the command line.
For example: restuner.exe filename.exe

When opening a file, Resource Tuner performs several automatic operations: unpacks the file if it is detected that it was packed using UPX, then checks the structure and resources of the file for possible errors, and finally rebuilds damaged resources in accordance with the executable file format specification.

Errors when opening a file

If an error occurs when opening a file, it is most likely for three reasons: the file is protected, the file is 16-bit, or it is not an executable file at all.

1. Error: The file is damaged, compressed by a packer or protected by a protector.

There is a very good chance that the file has been compressed to reduce its size. There are dozens of packers and protectors for executable files, and new ones appear all the time. Resource Tuner supports unpacking of only one, but the most common packer - UPX. Other packers are not supported, and you will have to unpack the file yourself before you can open the file for viewing or editing.

This situation is not considered a program error. We are not going to fight the attempts of other program authors to protect their creations from hacking, nor support the unpacking of several dozen different packagers, including both commercial products and homemade products.

2. Error: The file is defined as 16-bit NE Executable. This format is not supported!

Our programs only work with 32- and 64-bit PE files. The NE format (short for "New Executable") is a 16-bit application format left over from older versions of Windows 3.xx. With the advent of Windows 95, this format is considered obsolete and is not used, although it can be executed on modern platforms from Microsoft. We do not support 16-bit files and do not intend to support them.

3. Error: The file is not an EXE or DLL file. At all!

Resource Tuner does not detect a file by extension. If you rename the extension of an executable file, say, correct .EXE to .TXT, or remove the extension altogether, Resource Tuner will not be fooled by this: when opening a file, the program analyzes the file header inside the file, and does not look at the extension at all.

Therefore, if Resource Tuner tells you that the file is not executable, then it is so. If for some reason someone added a .DLL extension to a text file in a game package, then the file does not cease to be text and does not become a dynamic library. Don't be fooled by the file extension.

Which files do not make sense to open in the resource editor?

Despite the fact that Resource Tuner is designed to open and edit any 32/64-bit executable files, there are some types of EXE files that have virtually no resources.

1. Files created using Visual Basic.

In such files, there is nothing in the resources section except an icon and version information. Lines and dialogue in programs written in Visual BASIC are stored in their own proprietary format, and they do not use the standard resource section.

2. EXE files of gigabytes or more in size.

Since Resource Tuner is a 32-bit program, there are natural limitations for placing the image of the file being opened in virtual memory within the first gigabyte. A file of a gigabyte or more in size simply will not fit there.

3. Self-extracting archives in the form of EXE files.

In such files, there is nothing in the resources except an icon and version information, and maybe even that. Essentially, this is archived data equipped with a subroutine for unpacking.

4. Installers of other programs.

In such files, there is nothing in the resources except an icon and version information. Very similar to point 3. An installer file can be thought of as a container that contains another .EXE file in compressed form and a routine to extract it. In addition, programs for creating installers use different algorithms to store archived data within themselves.

Download your free trial!


Resource Tuner runs on all versions of Windows
from 2000 and XP to 8 and 10.

Minimum system requirements:
Intel Pentium® or AMD K5 166 MHz processor
16 MB RAM

- Extension (format) is the characters at the end of the file after the last dot.
- The computer determines the file type by its extension.
- By default, Windows does not show file name extensions.
- Some characters cannot be used in the file name and extension.
- Not all formats are related to the same program.
- Below are all the programs that can be used to open the EXE file.

Resource Hacker is a free and simple utility that can modify, rename, add, delete or extract executable files, resource files (*.RES) in the Windows operating shell. The program includes a built-in resource script compiler and decompiler. The application allows you to change pictures of cursors, icons, view raster images and listen to WAV or MIDI audio files. Allows significant resource savings by storing them in image, script and binary file formats. Changes resources, you can easily replace the icon of any program with the image you like. The program will help in adding resources...

IrfanView is a free graphic file viewer, the distinguishing features of which are its small size and functionality. IrfanView supports a large number of formats, has a clear interface and the necessary set of functions. So, with its help you can not only view images, but also rotate them at any angle, do minor color corrections, remove red-eye from photos, etc. Also, using IrfanView, you can take screenshots (both of the entire screen and individual areas), tear out icons and icons from various files, rename files according to a predefined template, and...

InnoExtractor is a program for unpacking various program installers created according to the InnoUmp standard. This application boasts a clear and simple user interface, as well as a number of additional features. Among these features, first of all, it should be noted that there is a convenient search for files using keywords, which eliminates the need to dig through all the directories with the program in search of the desired file. In addition, the program allows you to make changes to some installer files without unpacking. Also, it is possible to rewrite the main installation script, and, if necessary,...

Universal Extractor is a convenient utility for unpacking various archives, as well as some additional file types. This program is primarily suitable for those users who create archives on a computer, but only download various archives from the Internet and then unpack them. The Universal Extractor utility copes with this task quite well. It allows you to unpack all known archives, as well as dll, exe, mdi and other types of files. In fact, the program can serve, to some extent, as a kind of program installer, because it allows you to unpack some of the installers and then run...

ResEdit is designed to help you with programming. It was created to help developers only, but can now also be used to make changes to PE files. Can change text, buttons, pictures, commands and much more. The program contains a basic editor for creating or changing pictures, icons and mouse cursors. Can generate C++ code for dialogs and menus. Just like in other similar programs, there are no limit options “Return” and “Repeat”. Supports customizable layout, you can drag and drop panels and save them wherever you need. The program is very convenient, supports tabs,...

FileOptimizer is a convenient file compression application created by one of the independent teams of programmers. This application features improved compression algorithms and high speed. The program allows you to compress files of almost all types, including archives, text formats, image formats, etc. Also, this program can work with scripts, as well as through the command line, which will be especially useful for experienced users. For novice users, everything is very simple. The program is integrated into the context menu, which allows you to very quickly compress files located on any drive and in any folder.

ZipGenius is a program for working with archives. In other words, an archiver. The ZipGenius program already has all the usual features of an archiver. Thus, it can open archives of almost all formats (21 pcs.), supports full work with several of them, and also allows you to view the contents of the archive. Another feature is the creation of password-protected archives, which ensures reliable safety of your data, because in most cases, it is almost impossible to open an archive without knowing the password to it. You can, of course, use password guessing programs, but their speed is quite slow.