How to recover login and password on a router. How to find out the password from the router control panel. The most versatile solution

(router), I talked about it in some detail quite recently. Today there are routers in every office and almost every apartment. Despite their small size, these “boxes” are capable of connecting several computers into one network or providing the Internet to absolutely all devices that support access to the World Wide Web.

The problem with routers is that they are quite complex devices. For example, you need to use the device interface to configure settings. But if the device is not complicated, then setting it up for a person who is far from computers in general is almost impossible - you need to call a specialist, or go to the provider yourself with your own router.

But today we will talk about another problem. Let's say that you need to get into the router interface to change the password for the Wi-Fi connection. This is not difficult to do because you know the username and password to log in. But what if you forgot your password?

What to do if you forgot your password?

First of all, you need to know for sure whether the password on your router has been changed. So, if you set it up yourself, you probably managed to do this. If the router was set up by a specialist, then most likely he did not change the password for logging into the interface. If a specialist changes the password, he informs the owner of the router about this. If the password was nevertheless changed, then you can skip this part of the article - it will not help you. If the password has not been changed, then follow the instructions.

If you turn your router over, you can find the logs and login password on the bottom wall. Depending on the model and manufacturer, passwords may be different, but the login is usually used admin. Here are the commonly used passwords:

• 12345

• admin

• password

On some models there is no password at all - just enter your login. Here is an example of the designation (router - D-Link DIR-300).

Accordingly, enter the address of your router’s interface into the address bar, wait for it to load, and then enter the login and password specified on the device.

Password has been changed

Now I’ll tell you a little about what to do if the password has been changed. In this case, only Alas will help, but this is the only way. Resetting the router settings is easy, much more difficult to restore previous settings. If you don’t know how to do this, then it’s better to leave the reset until better times, because there is a high risk of being left without the Internet at all. If you know how to configure, you can proceed to reset (returning factory settings).

Each router has a hole with a tiny reset button. As a rule, it is located on the back wall of the device. It looks like this:

To press a button, you need to take, for example, a paper clip. But you need to not just press the button, but press and hold for about 10-15 seconds until the lights on the front panel blink, which symbolize resetting the settings. However, on some models the lights do not light up at all when resetting.

In this case, a default password is assigned, that is, exactly the one that you can see on the bottom wall of the router case. With it you can easily get into the device interface.

P.S. Please note that we are talking specifically about the router password, and not the Wi-Fi connection.

The access key to the network or to the network administrator page is lost, don’t be discouraged. It is possible to restore them. This article will help you solve this problem.

Standard passwords for routers

Each Wi-Fi router operates based on Internet access data and local network, which are the login and password. They are created at the very beginning of use in the first stages of setting up network equipment. The login is always the same Latin word “admin”, and the password can be either the word “admin” or the numbers 1234, 123, 0000.

There may also be no password at all. And for the Kyivstar operator, such a login is possible.

Photo: enter your kyivstar login and password

In any case, in order not to push your luck and not waste time on a random selection, you need to look at the technical data sheet of the router, which is included in the kit and may look like a brochure. If the router came to the user as a used product and the technical passport is not available, it is worth asking your friends, acquaintances or relatives who use a network device made by the same manufacturer, because login and password will be the same.

Factory settings

At the initial stage of setup, after entering standard identification data, the user will be offered the opportunity to change the login and password to make it difficult to log into the domain outside users. Those. On the computer screen, the interface will display all the necessary data, as well as tips on generating an “access key”, which includes the login and password.

After passing this stage the user will be prompted to create a local network with automatic connection to the Internet for ease of use in the future. At the same time, you should not confuse the login and password for accessing the local network operating on the basis of the router and the Internet, because these are two different things.

I forgot my router password, what should I do?

What to do if you forgot your router password is a common question for many users who have forgotten or lost their data. What to do in this situation? Recovering the key is easy. It all depends on which network password and login were lost. If it's a local network issue, i.e. in your router, then there are no serious difficulties to restore it.

Video: resetting the TP-Link router interface password

If the user has forgotten the Wi-Fi router password, he needs to act as follows:

How to recover the password and login for the router if they are needed to access the Internet?

In case of loss of data for using resources world wide web The following procedure is required:

Thus, the user has the opportunity to independently correct the situation without outside help.

Restoring an Administrator's Domain

In addition to those users who have lost access data to the local network and the Internet, there are also those who manage to lose access to the administrator page ( home page router). In this case, there is no chance to recover lost information and change the settings of the network device. On forums there is often a question like: “I forgot my admin login and password. What do i do?". It's easier to reset the settings in network device and re-create a new local network.

To reset the router parameters, just press and hold the button on the rear panel in this position for several seconds.

Photo: Reset button on the back panel

In this case, the lights on the front panel of the device will go out for a while, and then start working again. The button itself is located in a small hole to prevent accidental reset, and it can only be pressed using an additional device, which can be a match, a needle, a pin, etc.

Recovery methods

The router settings will be of no use if the user loses the access keys to the administrator page, router, local network and the Internet. In this case, each of the access keys will be restored differently. The main methods are hardware and software.

Method hardware recovery access is associated with checking the parameters on the router’s home page, and software access is based on the use software registry and special work applications that scan all information on the computer about network use.

When hardware recovery to the network is required, at a minimum, you must have a login and password for the administrative page on which all the parameters and settings of the local network and Internet connection are generated. To enter the administrator page, you need to type the manufacturer’s IP address in the address bar of your Internet browser.

The IP address can be found on a sticker located on the bottom of the router.

If there is none, then the home addresses of the routers look like this:

1. D-link 192.168.0.1
2. Zyxel 192.168.1.1
3. Asus 192.168.1.1
4. Netgear 192.168.1.1
5. TPlink 192.168.1.1

After logging in to the appropriate router address, the user will see an interface with many settings and network parameters. In order to find out data on the local network, you need to enter the “local network” tab. This tab may also be called a wi-fi network or have similar names.

After which the user must find the parameter “ wpa key" Opposite it will be the router access password.

Password and access to the router are not everything. In addition to the local network login key, you may also need login information for the provider's domain. This data is also specified in the network device settings.

To do this, after fixing the data on access to the local network, you need to go to the “Internet” tab, where not only the parameters and connection technology will be indicated, but also the data on logging into the Internet.

Most often, the login and password are located next to the “account settings” or “connection settings” line.

Restoration by utility (program)

Except hardware method There is also a software solution for eliminating the problem of losing identification data when logging into the Internet and local network. It is used by professional users and is not suitable for helping beginners. Thus, the participation of a second user with more than high level knowledge in this area.

At software method The following working applications are used to help restore the necessary data on logins and access passwords:

1. Dialupass;
2. Remote Desktop PassView;
3. RouterPassView;
4. WirelessKeyView;
5. Wireless Password Recovery.

Photo: password recovery program

And this is not the whole list. These programs themselves are amateur developments, and not the result of the work of professional teams, so the interface of these programs is not always convenient and understandable for a beginner. But if the user nevertheless decides to take independent action, then he needs to be prepared for the fact that most links to such work applications may contain malicious software.

Throughout the entire operation of the profile program, to search and detect the login and password from the network, an antivirus with the maximum possible set of functions must be running on the computer in order to prevent infection of your computer. personal computer and damage or theft of personal data.

Job similar programs based on basic principles functioning operating system, which, in turn, records every step of the user in the electronic information space. In this case, a register is formed that describes all actions performed during the Lately. They will be stored as encrypted files until all the memory on the hard drive is full.

It is impossible to open these files without special knowledge and professional skills. Not a single program known to many users will be able to read them and display the necessary information on the computer screen. In this case, we need special applications, helping to reveal encrypted logins and passwords.

After appropriate use of the program, the PC owner will be able to independently use both local and Internet networks in the future. But we must not forget that all network access keys must be saved in mandatory as in the form regular file with printed text and in written form, so as not to experience significant difficulties in connecting in the future.

Video: installing and configuring a Wi-Fi router

To prevent loss of data for accessing the local network and the Internet, novice users are recommended to take the following steps:

1. during setup and installation of drivers on network hardware the program will offer to save a file with backup data for access on your PC desktop;
2. after creation with network access data, the file must be copied to removable media and make another copy in any other folder;
3. After copying files, you must manually write down everything on paper required logins and network passwords.

In addition, do not forget that the keys are also available in free access to view from the user's computer that was configuring the router. This data can be seen in the network properties. To do this, you need to find the network connection icon on the taskbar on your desktop in the lower right corner.

Then move the cursor to the name home network and press the right button. When a new window appears, select the “properties” option and in the next new window you will be able to see all the necessary keys.

Using these tips will reduce the likelihood of complete loss necessary information for local Internet network.

Question answer:

How to view Wi-Fi password in Windows?

To view the password for accessing a wireless local network in Windows, you must:

Is it possible to recover the network security key?

The security key for accessing the local network is easy to recover. Just go to the administrator page and in the settings find the “security key” line, where the access password will be specified.

How can I find out my login and password if I have lost it?

In order to find out the login and password for accessing the Internet, administrator page or local network, you should use specialized programs(Dialupass, Remote Desktop PassView, RouterPassView), which can find the necessary data in encrypted network usage history files.

Similar information can also be found on the home page of the router, if the access keys to it are not lost.

What to do if you forgot the password for your wifi router?

If the user has forgotten the password for the wi-fi router, it is necessary to use specialized programs for reading encrypted information (Dialupass, Remote Desktop PassView, Router Pass View). But if the programs do not help, you will need to reset the device settings to factory settings by pressing the button located on the back panel of the router. Next, you need to reconfigure the network equipment and the network itself

Each router manufacturer installs firmware on its creation, device control. The router's operating parameters can be changed by configuring the firmware. To do this, you need to log into the control panel; you cannot do without a password and login.

What to do if you forgot your control panel password

If you want to change the password, activate or deactivate any function of the router, or change its operating parameters, dial address bar browser address 192.168.0.1 or 192.168.1.1 and follow the link. Important condition: The control panel will open only if the computer is connected to the router via Wi-Fi signal or using a cable.

You must enter your login and password

Before giving you access to the settings, the system will ask you for a login and password. If you don’t know or have forgotten your login information, you won’t be able to change the router settings. But there are two ways:

• If you have not changed the control panel password before, then the default values ​​are still used. The default login and password can be found in the documentation included with the router or in the table below;
• If you changed your password or login and then forgot it, you will have to reset the router settings. You won’t be able to recover your password, as you can on Internet resources, but by resetting the device parameters, you will roll back the changed password, that is, to log into account will be used again standard password, which can be viewed from the table below.

Login using default values

If you have not changed your password or reset your device, look in the table for the router model you are using to find out your login and password. Paste the resulting values ​​into the fields that appear when you log into the control panel.

Table: standard logins and passwords for different routers

Reset

If the password has been changed, you need to reset the settings. Regardless of the model and manufacturer of the router, you will have to perform one action: hold down the Reset button for 10–15 seconds, without releasing it until the router begins to reboot.

Typically the button is located on the back or side of the device and has a small diameter. Sometimes it is recessed deep into the body so that no one presses it accidentally. In this case, you will have to use a thin stick, needle or straightened paper clip.

Press the reset button for 10–15 seconds

As soon as the device turns on again, the settings will be reset, you can log in using the standard password and login. Please note that the password set on Wi-Fi network, will also reset, so you need to install it again.

Video: logging into the control panel and finding the router password

To log into the router control panel, you need a username and password. If you changed and forgot the data, reset the router settings. If the settings have been reset or have not been changed before, use the standard values ​​from the table.

There may be a situation when you need to connect some device to Wi-Fi, for example, a laptop or smartphone, but it turns out that you forgot the password for your Wi-Fi router. No need to worry! It's very easy to get your password back. After reading this article, you will learn how to easily find a forgotten Wi-Fi password in several ways. Most likely, only the first method will be useful to you, since it is the simplest and most effective, but I will also present the other two here. So, let's go! 😉

Method 1. It is also the most convenient and simple. Open "Network Control Center and shared access» . Next, in the left sidebar, select "Control wireless networks» . Now select the name of your WiFi, click right click mouse and choose "Properties". Then the properties window opens. In the tab "Safety" tick the box “Display entered characters”. That's all! You will see your password on the line above. (It's called a security key). detailed instructions in the picture below. The image can be opened in full size by clicking on it with the mouse.

Method 2. It is a little more complicated and suitable for advanced users. In this case, to remember your password, you need to connect to Wi-Fi interface- router. To do this, open the browser and enter in the address bar network address your router. Most likely the address is: 192.168.1.1 (or like this 192.168.0.1 ). Next, you will need to enter your username and password for authorization. Login is usually used admin and password admin(or 1234 ). If you are unlucky and unable to log in, read the instructions for your router, it should describe in detail how to do this.

So, when you have entered the router interface, you need to find the section that is responsible for WiFi security. It may be called “Wireless Security” or “Security” (as in the picture below). In any case, where there is a section related to WiFi, there should also be a security section. Now that you have found it, find the line called “Unmask” or “Show network key» and check the box next to it. That's it, now the router will show you the key.

Method 3. There is such a program called WirelessKeyView. It is free and does not require installation. The principle of operation is very simple: you launch the program, and it shows you all the passwords saved in the system. Download it and run it as Administrator. Surely, among the passwords it finds, there will be your WiFi password.

That's all the main ways to find forgotten password. Good luck to you! 🙂

So they rarely use it, only once at a stage initial installation. It's quite annoying when you forget your router password because some important information, such as the key/password for your wireless connection and your ISP username/password for the Internet connection is stored in the router. If you cannot access your router's configuration, you cannot change the wireless key or update your ISP access settings.

How to recover your router password?

The most obvious and common advice you can find on the Internet is the hard reset method, but this will also reset all router settings back to the default configuration. Therefore, we will leave this option as a last resort. Here are some possible ways gain access to your router if you have forgotten the password.

1. Factory router password

First, you need to remember whether you changed the standard password on the router. If you used the factory password, it is easy to recover. In this article we wrote.

2. RouterPassView program

3. Restore using Bruteforce method

Another option is to obtain the password by brute force using a dictionary. To do this we need a program and a dictionary for Brutus . On our website there is big choice dictionaries for brute force. But in in this case It is advisable for you to remember at least part of the password. This way the search can be more efficient and completed much faster.

4. Password reset

If everything we described above did not help, the only option left is to reset the router to factory settings. After this procedure, the router will return to the standard login and password. We have already written above how to find the standard password.

In order to reset the settings, you need to find it on the router case RESET button. Typically, this small button is located on the back of the router, next to the connection connectors network cables. This button It has small size and is strongly recessed into the router body. Therefore, in order to press it you will need to use some thin and long object.