How to move apps to lg sd card. Application "Move to SDCard". Transferring an application to a card using the AppMgr Pro III application

As a rule, you need to transfer data from one memory card to another after purchasing a new larger SD card. The matter seems to be not complicated, but there are some nuances, for example, when you need to preserve the functionality of all previously installed programs and applications.

Before you transfer files to a new memory card, you need to prepare it. The first thing you need to do is format the memory card. This will allow you to get rid of some problems at an early stage. To do this, you need to go to the “Menu” of the phone, then to “Settings”, select “Memory” and “Empty SD card”. Or you can connect the device to your computer and format it like a regular removable drive (format in FAT32).

After successful formatting, you need to assign a name to the memory card. It is better to set the name the same as the old SD card. Then you need to enable the visibility of hidden folders and files on your computer. This can be done through the menu bar of any folder – “Tools” - “Folder Options” - “View” (if the menu bar is not displayed, you need to hold down the “Alt” key). Displaying hidden files is necessary in order to copy absolutely all data from the phone’s memory card (some files may be hidden).

Transferring files

The easiest way to copy data to another memory card is using a card reader. To do this, you just need to insert the old SD card into the device, copy all the data to the computer, and then insert a new memory card into the card reader and write this data to it. Typically, card readers support very high data transfer rates, so this process will take a little time.

If you don’t have a card reader, you can simply copy the files via your computer. To do this, you need to insert the old memory card into the smartphone, enable the appropriate operating mode for data transfer in the settings and connect the device to the computer via a USB cable. Then you need to copy all the data from the SD card to your desktop or any other folder. Depending on the total amount of information, this procedure may take a long time.

After this, you need to disconnect the phone from the computer, turn it off and insert a new memory card. Then you need to connect the device to the computer again and move the files to the new SD card. If everything was done correctly, then all files and applications will be displayed correctly.

When using a phone, many people encounter problems such as memory overflow. Various music is downloaded to the phone, pictures and videos are uploaded, and photographs are taken. Some people use their phone's memory card as a portable flash drive. All this leads to the fact that sooner or later the memory card becomes full and needs to be cleaned. Of course, this can be done manually by removing unnecessary or boring pictures and music, but this process is long. The best way is to format the phone's memory card.

You will need

• -phone memory card;
• -computer or laptop;
• -card adapter.

Instructions

Remove the memory card from the phone and install it into the adapter, which must be inserted into a special slot on the computer. In the Windows menu, click “ ” and wait until the memory card is displayed. After that, select the folder of the connected memory card. Using the right mouse button in the map menu, find and select the “format” function. The computer will ask you to confirm the selected function. Confirm your decision by clicking on the “OK” button, after which the formatting process will begin.

You can also format the card without using . To do this, go to your phone settings and find the menu for your phone memory card. Usually the menu is “memory card” or “Media Card”. Click “options” and from the list of proposed functions that are possible with the card, select “format”. Confirm your choice and wait for the process to complete. Now the card is formatted and ready for use.

note

On some phones, instead of the “format” function, there is a “format” function - essentially they are the same thing, so don’t be alarmed if you don’t find the usual name for the operation.

Helpful advice

The formatting process is short and will take no more than three minutes, and the card itself will be completely empty after formatting. It is recommended to format your card at least once every year and a half. This allows you to free up all the memory on the card and update its contents by writing new files there.

Over time, a large number of different files accumulate on the memory card of a mobile phone, many of which turn out to be completely unnecessary. There are several ways to clear them from a memory card.

Instructions

Connect your phone with the memory card inserted to your computer using a USB cable. If your mobile phone prompts you to select a connection mode, select the file transfer mode. After this, the system will detect a new removable device for storing data. If necessary, the drivers required for operation will be automatically installed. You can also connect your phone to your computer using bluetooth.

After this, use the operating system explorer to open the memory card folder of the connected phone. Select all files and right-click on them. In the list that appears, select “Delete”. You can also press the Delete key on your keyboard. Wait until all files have been deleted.

Apart from this, you can clear your phone's memory card by formatting it. To do this, open “My Computer” using Explorer, right-click on the phone’s flash card and select “ ” from the list. If desired, change the standard formatting parameters, and then click the start process button. Wait for it to complete.

Another option is to clear the memory card directly using the phone's operating system. To do this, open the phone menu and select the memory card. Select all objects using the appropriate phone function, and then select “Delete”. Wait for the cleaning process to complete.

If your computer has a card reader, you can use the following option. Remove the memory card from the phone, and then insert it into the computer's card reader. Using File Explorer, open the flash drive folder and delete all files. You can also right-click on the memory card icon and select “Format”.

Tip 4: How to transfer applications from a memory card to phone memory

Applications for mobile phones can be installed both in removable storage devices and in the internal memory modules of a mobile device. Before installing software, always check it for viruses and do not trust sites with questionable content.

You will need

• - program installer.

Instructions

If the software was previously installed on a flash card of your mobile device, transfer it by reinstalling the software. To do this, go to the menu item for managing installed programs and mark the applications that you want to move to the memory card.

In the context menu, select the “Delete” action, then confirm it and follow the instructions to uninstall. If the program prompts you to save the settings, agree and restart your phone.

Perform a subsequent reinstallation of the software into the memory of your mobile device using the installation files. If they are currently not on both memory modules of the device, copy them by first connecting the mobile device to the computer in “Storage” mode, through software installed from the disk, or by connecting wirelessly via Bluetooth. It does not matter into which folder the installers will be copied.

Disconnect your phone from your computer, open the file manager and open the folder where the application installers are located. Start their installation by selecting the mobile phone memory. Run the installed items and check if the custom settings are saved for them.

Also use an alternative method for transferring applications. To do this, open the list of installed software in the main menu of your mobile device. Mark the required items and open the context menu. Select the move item and in the window that appears - the desired directory. This action is not available for all mobile device models.

note

Many applications may require an Internet connection, calls or SMS messages to continue working. In this case, make sure that the application is not malicious.

Copy and paste operations are the most commonly used functions of file managers of any operating system. Each OS provides the user with the ability to do this in several ways, using the mouse, keyboard, or a combination of both. The sequence of actions for such operations with the contents of an entire folder is not very different from the actions when transferring one individual file.

Instructions

Navigate to the folder whose files you want to transfer. If it is located on the desktop, then simply double-click on its icon, and if not, then do the same with the “My Computer” shortcut and go through the folder tree in the window of the launched file manager to the desired directory.

Select all files in the folder. To do this, click any of them, and then press the key combination Ctrl + A (Latin letter). The same can be done by opening the “Arrange” drop-down list above the list of folders and selecting the “Select all” line in it.

If you need to place duplicate files in another folder, leaving the contents of the original folder in the same place, then copy everything selected - press the Ctrl + C key combination. And if you want to move all objects, leaving the original directory empty, then use the cut operation - press the Ctrl key combination + X. Both of these commands can also be selected in the context menu, called up by right-clicking on the selected area in the Explorer window.

Go to the directory where you want to place everything you copied or cut. Click the field in the right pane of Explorer and press Ctrl + V - this corresponds to the paste operation. You can do the same using the corresponding line in the context menu. This completes the procedure for transferring files from one folder to another.

Instead of a combination of cut and paste operations, you can use a drag-and-drop mechanism - simply move the previously selected files using the left mouse button to the icon of the desired folder. If the source and destination folders are located too far apart in the directory hierarchy, you can open each of them in a separate window and use any of the described mechanisms (drag and drop or copy and paste).

note

You must have permission to perform delete and insert operations on the source and destination directory, otherwise the system will display an error message.

Mobile phones are equipped with many functions. With their help, you can view photos, listen to music and visit Internet resources. Naturally, to work with files using a mobile phone, they must be downloaded to this device.

You will need

• - USB cable
• - BlueTooth adapter

Instructions

Various programs are used to synchronize a cell phone with a computer. Usually their developers are companies that created certain phone models. Such programs are convenient if you need to quickly set up your phone, copy information from a SIM card, or install applications. To transfer most files, it is better to use a USB cable or BlueTooth adapter.

A card reader is a device that allows you to read data from memory cards. If you have ever used a card reader, you will have noticed that when connected through a card reader, the memory card is visible just like a regular flash drive and no special software is needed to work with it. But more than one type of memory card is sold, so you need to be careful when choosing a card reader.

What types of card readers can be found on sale?

Firstly, card readers can be divided into internal (installed in the computer case, connected to the motherboard) and external (connected with a cord to the computer’s USB port, like a keyboard or mouse).

Secondly, card readers can be divided by the types of cards they support. You can find card readers for every type of memory card, but there are also universal devices that allow you to work with several types of cards. If you are sure that you only need one type of card for all your existing devices, you can purchase a card reader only for them (most often, such a card reader looks like it has a connector for inserting a memory card), but a universal card reader will allow you not to waste money if there is a problem. the need to read data from a card of a different type.

Helpful advice: the types of cards that the card reader supports are its main characteristics. Before purchasing a card reader, inspect all the devices in which you use memory cards, write down their type, and ask the store salesperson to show you all the card readers that support all of your cards.

Operating system compatibility is also important. Before paying money, make sure that the box (or the device passport) indicates all the operating systems with which the card reader software can work.

And of course, I must say that you can find funny-shaped card readers. Choose such a card reader as a gift for yourself or friends - such a useful toy at an affordable price will make working at the computer not only more convenient, but also more fun.

Probably, each of us has encountered the problem of insufficient memory or simply wanted to transfer applications to a flash drive, since the memory was already full, and games and applications cannot be transferred to MicroSD and the notification “Insufficient memory on the device, some functions may be limited” was annoying.
Even if I deleted many applications and games, there was still not enough memory. But how to increase memory without losing everything? Later in this article we will look at and find out how to solve this problem.

I want to warn you right away that neither I nor the site administration are responsible for your actions. You do everything at your own peril and risk.

P.S. The article uses the most simplified words for better understanding.

To continue you will need:

• MicroSD Card with at least class 6 (preferably class 10) and larger than 4 GB in size
• (To create a second partition)
• (For transferring applications and games)
• (For transferring games with cache)

Why do we need a MicroSD card and ?

To increase memory, we will have to transfer your applications to the so-called second partition of the MicroSD card (for transfer you need ), and we will create it ourselves. If you already have a second section on your card, you can skip this item.

Creating a second MicroSD partition

1. Save all files on another medium (For example, on a computer)
2. Disconnect the MicroSD card along the path “Settings/Memory/Disconnect memory card”

3. If you have ROOT rights, install, if not -

4. After starting, click on “+” twice
5. Select “Ext4” in Part 2. If you have a device running Android 2.2-2.3, select “Ext 3”
6. In Part 2, select the size, how much memory you want to allocate in MB from the card for applications and games (The more the better)
7. Look at the first graph with a white bar, with the amount of memory remaining and enter these numbers in Part 1
8. Check if you did everything correctly. If everything is correct, click on the menu button or the so-called “three dots in the corner”, and click on “Apply changes”
The hardest part is over, you can reconnect the memory card (Settings/Memory/Connect memory card), transfer files back to the flash drive, but before that you can notice that the size of the memory card has decreased. This is how it should be, because we created the second section.

Setting up transfer to the second partition

We need to install the program (Google Play)

After installation, open the application. You should see a window like this. Select "Ext 4" or "Ext 3" for Android 2.2-2.3 and click on "OK".

After rebooting, open the application. You should see a list of applications.

Now we will look at what can be transferred and what is better not to transfer.

Let's just say that system applications should never be transferred. You never know what will happen. Therefore, it is better to transfer custom applications (those that you installed yourself). I do not recommend transferring those applications that you actively use (For example, Browser or WhatsApp and the like).

And to make it more convenient, the application has sorting. To do this, click on “Exact three stripes” and select “Custom”.

A list of your applications should appear in front of you. Now you can select the applications that you want to move to the second partition and link them there. Click on “Three Dots”, then on “Several”, select the applications to transfer and click on “Send”.

A few minutes of waiting and you're done! You have more memory, and you can still download games and applications and transfer them. If you delve into the Link2SD settings, you can enable auto-link. This is a function that automatically transfers the application to the second section of the card, thereby making your life easier.

You can also change themes in the settings, buy the Pro version, and so on. But that’s not about that now. In general, we figured out the main problem. But, I want to tell you, Link2SD does not transfer game cache (Game cache is files in .obb format along the path Android/obb/“game package name”). So what should we do? Let's talk further.

Transferring game cache and data to a MicroSD card

Game caches can be transferred using a great program called . I’ll say right away that the cache is transferred to the flash drive itself, and not to the second partition.

To get started, install (Google Play)

Open the application, and swipe from the left edge of the screen to the right edge (Swipe) and tap on “Application Analyzer”

Here is a list of games and programs sorted by “File size from largest to smallest.” Select games with cache, or find them by size.

For example, I chose this game. As you can see, there is data here - this is application data, and obb - additional files, i.e. cache. You can transfer both this and that in turn, there is no difference. Therefore, where do you want to start, click “Create a pair” there.

After clicking, a window should appear, just click on “Yes”. Then click on the checkbox, the file transfer window will appear again and click “Yes”. The file transfer status will be known in the Shutter.

If the paper clips turn green, it means that the cache or data has been completely moved, and you can already play.
When turned on, the program will mount the files itself, making your life easier.

After these procedures, you will forget what memory even is. Games and applications will fly to the second partition themselves (except for the cache and data, that’s on its own).

I hope that the article will at least somehow help you. Good luck on your adventures!

P.S I want to thank my friend for the decent title picture.

Almost all phones and tablets released in 2018 have a large amount of built-in memory, which is expandable using a microSD card of 32 GB or more (in mid-range and flagship models). But among owners of old and inexpensive devices with internal storage of 4 GB or less, the issue of lack of free space on a smartphone is especially acute. In this article, we will look in detail at all the ways to transfer applications to an SD memory card in Android.

The instructions are intended for both beginners and experienced users, so it talks about transferring applications not only using standard means, but also using special programs that require root rights.

You can also free up space in the internal memory by deleting system applications.

How to transfer applications to a memory card using accessible means

Since the earliest versions of Android, the system has had the ability to transfer most installed applications to an SD card. Instead, in Android 6.0 Marshmallow, it became possible to use a memory card as an internal drive (this method is also described in the article).

Let's look at the function using the example of a Samsung phone running Android 5.0:

Go to Settings and select Apps. Depending on the manufacturer and firmware, the item may be called “Application Manager”, “All Applications”.

Select the downloaded game or program. If the application can be moved, the “Move to SD card” button will be active. Click on it.

If the button does not work, the developer has prohibited installation of the application on the memory card and it will not be possible to move it using standard means.

AppMgr III (App 2 SD) for transferring applications

In order not to open the settings of each game or program and not see whether they can be transferred or not, use the AppMgr III (App 2 SD) utility - in it, the moved applications are collected in a separate tab.

Hold your finger on app cards to mark them. Select the ones you need and click on the folder icon at the top. In the new window, click on the red arrow, which will take you to the application details page. To go to the settings of the next selected program or game, press the Back button.

AppMgr III will also tell you which applications should not be installed in external memory so that all their functions work correctly.

Using an SD card as internal memory

This feature was introduced in Android 6.0 and works in Android 7 Nougat, Android 8 Oreo and Android 9 Pie. It allows you to use a memory card as a built-in storage device. Since SD replaces internal storage, it makes sense for the flash card to be larger than the internal memory. And for applications to work quickly, the SD card must have a high write speed.

Data from a memory card formatted as an internal drive will not be read if you install the SD card in another smartphone or tablet. To use the card in a new device, you will have to format it as portable storage.

After connecting, a message will appear in the notification shade that a new memory card has been detected. Just click “Configure”, select “Internal memory” in the window that opens and follow further instructions. Don't forget to transfer files from the SD card to another storage device, as they will be deleted during the formatting process.

Detailed instructions for setting up the card:

1. Go to “Settings” → “Storage” (may be called “Storage and USB drives” or “Memory”).

2. Click on "SD Card".

3. In the upper right corner, open the menu, select “Settings” (in some firmware “Memory”).

4. Click Internal Storage.

5. A warning will appear on the screen that all data saved on the SD card will be deleted during the formatting process. So first copy them, and then click “Clean and Format”.

6. If your smartphone uses low-class SD (for example, microSD Class 6), a message will appear on the screen that the memory card is slow.

7. Before completing the formatting process, you will be prompted to transfer some files and applications to the SD card. Select the option you want, click Next and then Transfer.

8. Finally, click “Done” and manually restart your phone.

Now open “Settings” → “Applications” → “Application details” (if this item is not there, proceed to the next step) and select the installed program or game.

Click “Storage” (may be called “Memory”), then click the “Change” button and select the SD card.

In the window that appears, click “Move” and wait for the transfer to complete.

Formatting a memory card as an internal drive using ADB

If your smartphone has Android 6, 7, 8 or 9 installed, and there is no option to format the SD card as internal storage in the settings menu, the manufacturer has not added such an option to the firmware. But users can format the memory card themselves using the utility.

To do this, activate on Android, connect your mobile device to your PC and run ADB from the command line or from Windows PowerShell if one of the latest builds of Windows 10 is installed on your computer. Enter the following command and press Enter (in Windows PowerShell, add ./ before the command).

The console will launch and the “$” sign will appear in it. Type the command and click Enter:

The line below will display the view's SD card ID disk:NNN,NN. Replace NNN,NN to the value of the received identifier and run the command:

Wait for the command to complete. Then go to Settings → Storage and select SD card. Expand the list of options by clicking on the three dots at the top and click “Transfer Data.”

Select "Transfer" and wait for the process to complete. Finally, click “Done.”

How to move multiple apps to SD card in Android 8 Oreo and 9 Pie

To avoid performing the same steps to transfer applications separately, use the AppMgr III (App 2 SD) program, which was described at the beginning of the article. Only on Android 8 Oreo and Android 9 Pie you will have to give AppMgr III a couple of permissions.

Launch the application. A notification will appear that the program needs access to your usage history. Click "Allow", select "AppMgr III" from the list of applications, activate the switch and return to the program. You can also configure access to your usage history by going to “Settings” → “Applications and notifications” → “Advanced settings” → “Special access” → “Access to usage history”.

Select the games and programs that you want to move to the flash card and click on the image of the folder with the arrow inside. In the "Move to Map" window, click on the red button below.

A message will pop up saying that AppMgr III needs permission to change system settings. Click on the switch and you will be taken to settings. Activate the toggle switch and return to the application. The options for this permission are located under Settings → Apps & notifications → Advanced settings → Special access → Change system settings.

You will then be prompted to allow AppMgr III to automatically perform actions without manual confirmation for each application. Click "YES", go to the "Accessibility" section, select "AppMgr III", switch the toggle switch to the "ON" position and confirm by clicking "OK". Then return to the program.

Application transfer will begin immediately. Just wait for it to complete.

At the end it will show that the applications have been moved to the memory card.

Transfer games to SD card in Android

Most of the user memory is occupied by the cache of installed games. To move it, we will use the FolderMount program, which can mount directories from internal memory to external memory. It requires .

Download FolderMount from Google Play, launch it and provide Superuser rights.

In the “List of Pairs” tab at the top, click on “+”.

Come up with and enter the name of the folder pair in the first line.

Click on the second one, after which the built-in file manager will open. The game cache is located in the “Android/obb” directory, and the application cache in “Android/data”. Go to the folder you want to mount and click on the checkmark.

The screen will ask if you want to create the destination folder automatically. Click "YES" if you agree. In this case, FolderMount will copy the path from the internal storage and create the same on the external drive. Click "NO" if you want to manually set the mount end point and select the folder where to move the files.

To start copying, click on the checkmark and confirm the transfer by selecting “YES” in the next window.

The process will be displayed in the notification panel.

Once copying is complete, switch the toggle switch in the “List of Pairs” tab to mount.

At the bottom there is a button with a pin image, clicking on which will mount all directories at once.

To move files back from the destination folder to the source folder, first unmount the pairs: to do this, turn off the toggle switch or click on the crossed out pin, then hold your finger on the pair and click on the trash can icon.

How to move apps using Link2SD

Link2SD is a program that can mount application data onto a memory card. In order for it to work, it is necessary to create an additional partition on the SD in the ext3/ext4 file system on the mobile device. Partitioning a memory card into sections is done in one of the following ways.

(!) Before creating a new partition, copy all the files located on the SD, as they will be deleted after partitioning the memory card.

Memory card partitioning on Android via TWRP

If installed on your smartphone, partition the SD card through it. To do this, click “Advanced”.

Select "Partition SD card".

Check "Micro SD card" and click "OK".

Select the file system of the ext-partition to be created and specify its size. For example, 2048 MB - this memory will become available for transferring applications and the volume of the SD card will be reduced by that amount. Leave the Swap partition size (paging file) equal to 0.

Drag the slider to begin SD marking.

At the end, click “Reboot System” and “Do Not Install” if you do not want to download the official TWRP application.

The device will reboot. If you go to “Settings” → “Memory” (or “Storage” in the latest versions of Android), you will see that the SD size has decreased. The second section “sees” only Link2SD, App 2 SD and similar applications.

Create a hidden partition on SD using AParted

The second way to split a memory card into 2 partitions if you have Superuser rights, but no TWRP:

Go to “Settings” → “Memory”, click “Disable memory card” and confirm the action.

Launch AParted and grant root access.

There are 2 bars in the Create tab: the top one will display the new partition, and the bottom one shows the current SD size and its file system.

Click "ADD" to create the first partition. This will be the new size of the memory card where you can save photos, music, videos and other files. Leave the checkbox next to “Format”, the fat32 file system and select the size with the slider. To set it more precisely, click on the number next to MB, enter the desired value and click OK.

Click “ADD” again and create a second hidden partition to which games and applications will be transferred. Pull the slider all the way, leave “Format” checked and select the ext file system.

Click “APPLY” and select “OK” in the warning window that appears.

The SD partitioning process will start.

When completed, the second line will display 2 sections.

Now connect the memory card through “Settings” if this did not happen automatically. The new SD size should be displayed there.

Working with Link2SD

Open Link2SD and grant the program Superuser rights.

A window will immediately appear asking you to select the file system of the hidden partition of the SD card. Check the appropriate ext version and click OK. If the window does not appear, expand the menu on the left and click “Recreate mount script.”

Then click "Restart device" to mount the second partition of the memory card. The device will reboot.

Once Android is launched, go to Link2SD, click on the 3 dots in the top right corner and select "Multiple".

Select the applications you want and open the menu again. Click "Send".

There's also a "Move to SD Card" feature that moves apps using the standard Android method that isn't available to users without a Link2SD.

If you need to move one game or program, find it in the list, click on it and select “Send” or “Move to SD card”.

Many owners of modern gadgets are trying their best to expand the memory in their device. Unfortunately, 4-8 GB of internal memory is not enough for users to work comfortably. An SD card allows you to expand these boundaries. You can transfer music, videos or text documents to it. But what can you do with games? How to move applications to a memory card? Now there are many ways to help you do this.

Standard means

As we have already found out, built-in memory plays an important role in using the device. As a rule, about 1 gigabyte is allocated for the operating system, 2 GB for multimedia files. So what remains? Only 1 gigabyte is allocated for various applications. Of course, by modern standards this is very little. Nowadays there are Android applications that take up more than 2 GB. It doesn’t matter how powerful your mobile phone is, because without memory you won’t be able to install normal applications. It is because of this that many users are looking for a way out of this situation. Let's look at how, using standard tools, you can move applications to a memory card from Samsung, Asus and other well-known brands. Unfortunately, this method will not work for owners of Chinese phones.

The fact is that in Chinese models, developers separate internal memory for general use and memory for multimedia. When transferring, the files will simply move to the second half.

On more expensive models, developers have provided the ability to transfer applications to an external drive. This method does not require any third-party utilities. If your phone supports this feature, then you can easily move the necessary programs. How to move applications to an Android memory card?

First, let's go to the settings of your device.

Go to the “Applications” item.

In the list, find the application that needs to be moved and click on it.

In the new window, click on the “Move to USB drive” button.

Unfortunately, not all programs can be moved. If the developers have provided such an opportunity, then you will move the application in a few minutes. You also need to remember that not all files are moved to the SD card. Only large files are transferred, while others that are responsible for launching the application remain on the internal memory.

Additional software

How to move an application to a Lenovo memory card? This can be done automatically using additional programs. The most common is App Mgr III. This utility is available to everyone. It's free and you can download it from Google Play. The program is quite simple, anyone can understand the functionality. When installing a new program, it will warn you that you can install the game on the SD card. Agree with it and wait for the game to install.

Using the App Mgr III program

How can I move applications to a memory card using additional software? If the game or program is already installed on the device, then you should follow the instructions to transfer the utility.

1. Open the required application and select “Moveable” from the top. This will show you all the games that can be moved to the SD card. You can also view games and programs that have already been moved by selecting “On SD card”, and utilities that cannot be transferred.

3. Confirm the selected actions and wait for the set goal to be achieved.

Using FolderMount

FolderMount is a special program that performs its functions perfectly. It will help you move the application. Using this program, the Android memory card will be used as the main memory, since it allows you to move almost all files to an external drive. Unfortunately, FolderMount has a significant drawback: it requires ROOT rights. If you get superuser rights, then this utility will help you a lot. It transfers not only game files, but also their cache. It's great for gaming. You can also transfer applications not only to an SD card, but also to any other external storage device.

FolderMount operation

Transferring files using this utility is quite simple, but some users may encounter certain problems. How to move applications to a memory card?

Download the program from Google Play and install it.

Click on the button in the form of a plus sign, which is located in the upper right corner.

In the new window, first select “Name” and write the name of the game you want to move.

After this, select “Destination” where you want to move the game.

Confirm the action by clicking on the checkmark in the upper right corner. We wait for the application to move to the memory card. Then you can move on to other games.

Conclusion

How to move applications to a memory card? As you may have noticed, there is nothing complicated about this. If using standard tools you were unable to move the game or program, then you should install additional software. Of course, these programs will not be able to transfer all applications to the SD card, but this way you will still free up memory. The most effective utility is FolderMount, but it requires ROOT rights. When you get superuser rights, you take a risk, but it greatly expands the functionality of the phone as a whole and gives you many new features.

Modern mobile devices have a large amount of built-in memory. However, this is not always enough, since modern games and applications take up quite a lot of space. Memory problems can be partly solved by moving applications to the SD card.

It is worth noting that some applications are not transferred to the Android memory card if the developer does not include such an option in their product or there is no free space on the memory card. Also, in some budget phones this function is initially removed from the firmware.

How to move an application to an SD card using the standard method

The first thing you can try is the built-in move feature:

Important! The standard method does not move all the data; some information will remain in the device’s memory.

This is a convenient utility that eliminates the need for repeated stereotypical actions; it provides the ability to perform group control list of applications.

First start sorts applications, allowing movement and will display a list. The required ones are highlighted by pressing and holding. To transfer an application to a memory card, you need to click its icon and, when prompted by the utility, confirm the transfer. Separate tabs display programs that are already on the SD card and programs in the phone's memory that cannot be moved. In addition, a warning will be issued if moving the program will reduce its functionality.

Folder Mount

An advanced program that allows you to link any internal folder to any external one, thereby moving applications to the memory card. For FolderMount to work requiresroot rights:

After this, only the image remains in the internal memory, and the folder itself is located on the SD card.

Folder Mount analyzes the list of applications, their size and finds those that should be transferred to external media first.

Application "Move to SDCard"

““Weighs” little, moves programs in both directions, sorts them by date, name, size.

The procedure is simple:

• In the menu on the left side, select “ Move to memory card»;
• Mark the application with a bird, click " move»;
• appears process image with a slider from 0 to 100%.

The reverse process is available from the " Moving to internal memory».

For work necessaryroot rights and an additional etx partition on the memory card (primary).

On startup scans the device and displays a list of all programs that are allowed to be saved to the Android memory card. You can select one application, or use the " Multilink» Perform batch transfer. But first you need to create the necessary sections.

Creating a partition using Recovery TWRP

The system recovery menu is intended for installing alternative and factory firmware, updates, applications, synchronizing with a computer, full or partial backup, creating and formatting partitions on an SD card. Using TWRP is easy:

The program will ask for consent to install an officially distributed application. If you don't need it, click " Donotinstall».

After reboot, go to " Memory"("Storage") and check whether the storage size available for SD has changed. If everything is done correctly, it will shrink because the created ext-partition is now visible only to App2SD, Link2SD and other similar managers.

Create a partition with EaseUS Partition Master

In this case, we will work on a computer, connecting the card through a card reader.

The procedure for partitioning and creating a 2nd partition on an SD card in EaseUS Partition Master:

In the “Settings” of the device, go to “ Memory", choose " Disable card" The warning prompts you to confirm the action.

After launch it will ask you to confirm superuser rights.

Open « Create", a new section will be displayed at the top, below it a line with information about the SD size and the file system used:

Button " ADD» creates a new section. The size can be set using the slider or by clicking on the number.

Choose file systemfat32, mark “Format” with a bird.

Now the parameters of the second section are set.

Again you need to press " ADD" Move the slider all the way and leave a checkmark in the “ Format", click ext3, then " Apply"("Apply").

This displays warning. To start the card splitting process, you must agree.

The process image will appear first, then the new sections.

The SD card is connected. Through " Settings" V " In memory"You can see its changed size.

Moving with Link2SD

Now it is possible to transfer applications to an Android memory card using the manager. To do this you should:

When the process is complete, launch the transferred application. If it (no matter what the reasons) does not start, it is best to return to the previous location using the “ RemoveLink».

Files To SD Card

A program for transferring applications to a memory card is available in the Play Market. It can be used to quickly change file location even in devices with small built-in memory. Allows you to copy data in both directions. Makes it as easy as possible to free up the internal storage of the device.

After installation, as well as after every restart device, the program needs confirmation of rights and configuration of access to the external storage.

All-In-One Toolbox

A package of tools that optimizes the OS. All-In-One Toolbox is useful for fixing registry errors, returning to factory settings, including after a device infection and incorrect installation of programs. Allows you to monitor and optimize the storage status, delete cache and history, and manage SD card partitions.

Using the card as internal memory

This function is not available on all gadgets, but only starting from Android 6.0.

Important! In this case, this SD card cannot be used otherwise. For example, to move it to another device, you will need formatting. When you remove a flash drive connected in this way from the device, all information will be deleted from it.

In Settings select " Storage" and press " SD card" Find the item " Tune", then go to " Inner memory" A warning about data deletion will appear. To agree to start the process, you need to click “ Clear" If the card class is lower than 4, a warning will appear indicating that the device will operate slowly. To complete the process you need to click " Transfer now", then " Ready" After the transfer is complete, reboot the device.

There is information on setting up this function on our website.