Javascript enabled a connection. How to enable javascript in Yandex

JavaScript is a special scripting language. It is used, for the most part, to create scenarios for the behavior of an Internet browser. If scripting is disabled in the browser, then not every web page will be able to be viewed correctly. By disabling JavaScript, the user causes inconvenience to himself, since after this some functions may not work, work on certain tasks becomes more difficult, etc.

Enable JavaScript in internet explorer

If for some reason JavaScript was disabled, I recommend activating it. For the internet explorer browser, as well as other Internet browsers, this is easy to do. And as a result, as you understand, you will get a huge number of additional opportunities.

The described steps are intended for those users who have internet explorer 6 and later versions.

If you have the earliest versions of the browser, it is better to update them to the latest modification. Moreover, manufacturers have significantly improved the characteristics of the Internet browser and functionality. Well, as a last resort, you can do anything at any time.

Problems that may arise Do not forget that after updating applications, JavaScript settings may be lost. In addition, these settings are affected by changes in security settings and the installation of new security software on the device.

Problems with the display of Google ads may indicate that there are problems with JavaScript.

As you can see, enabling JavaScript in the browser is an absolutely simple operation. At the same time, almost any user will undoubtedly appreciate the opportunities that they will receive after this. Disabling JavaScript will have the opposite effect and cause certain errors when browsing the web. Do not forget that after installing add-ons, the settings may change, and you will most likely have to do all the steps listed above again. This will also be necessary for those who, for any reason, changed the computer’s security settings.

JavaScript, to put it simply, is a programming language that was created to interact with an HTML page back in 1995 by a Netscape specialist.

Today, a large number of web resources (including us) use this language to expand the functionality of their website. Web browsers are equipped with fine settings in which you can enable or disable the option you need, in our case, JavaScript support. By disabling JavaScript in your browser, you run the risk of not receiving the information you need on a particular site, or you will be faced with limited functionality.

How to enable/disable JavaScript in the Mozilla Firefox browser?

So, we'll start with my favorite browser - Mozilla Firefox. To enable JavaScript processing in it, do the following:

1. Go to browser configuration. To do this, enter the following into the address bar of your browser:

About:config

and press " Enter" on keyboard.

After you press Enter, a warning page will open in front of you:

On it you press " I accept the risk!».

Javascript.enabled

after which you will be presented with one match:

The found configuration is responsible for the state of JavaScript processing in your browser. You double click on it left mouse button, thereby changing its state, where the value " false" means disable JavaScript processing in the browser, and " true”, respectively, – inclusion.

How to enable/disable JavaScript in the Opera browser?

Enabling JavaScript processing is a little easier in this browser than in Mozilla Firefox.

1. Go to your browser settings. To do this, press the key combination on your keyboard:

P – English. An alternative call to the settings page is possible through the menu, which opens by clicking on the logo in the upper left corner or through the search bar where you enter:

Opera://settings

and press " Enter" on keyboard.

2. On the page that opens, on the left side of the screen you click on the item “ Additionally" and in the menu that opens, select " Safety»:

and go to it.

4. In this section you are looking for " JavaScript»:

and also go to it.

5. On the page that opens, you enable JavaScript processing (the checkbox should turn blue) or disable it (optional) (the checkbox should turn gray):

In addition, on the same page you can add exceptions in the form of a white (allowed sites) and black (prohibited sites) list of sites.

How to enable/disable JavaScript in Google Chrome browser?

To enable JavaScript processing in the Google Chrome browser, do the following.

1.

Chrome://settings

and press " Enter" on keyboard.

An alternative call to the settings page is possible through the menu, which opens by clicking on the three dots in the upper right corner.

3. On the page that opens you search for “ Content Settings»:

and go to it.

4. On the new page you search for " JavaScript»:

and also go to it.

5. On the page that opens, enable or disable (optional) JavaScript processing:

To do this, move the checkbox to the appropriate state.

In addition, on the same page you can add exceptions in the form of a white (allowed sites) and black (prohibited sites) list of sites.

How to enable/disable JavaScript in Yandex Browser?

To enable JavaScript processing in Yandex Browser, do the following.

1. Go to settings. To do this, enter the following into the address bar of your browser:

Browser://settings

and press " Enter" on keyboard.

An alternative call to the settings page is possible through the menu, which opens by clicking on the icon ≡ in the upper right corner.

Click on it.

3. In the drop-down list, under " Personal data", find the button " Content Settings»:

Click on it, then in the pop-up window find the setting “ JavaScript»:

This is where you set the JavaScript processing value you need. Here, just below, you can manage exceptions (black and white list of sites).

How to enable/disable JavaScript in the Microsoft Edge browser?

Microsoft Edge is an exclusive browser from Microsoft for the Windows 10 operating system. It enables JavaScript processing as follows.

1.

After which you will see a command execution window. In it you enter:

Gpedit.msc

and press " OK" or the " Enter" on keyboard.

And on the right side of the same window, find “ Allows you to run scripts such as JavaScript» and double-click on it with the left mouse button.

3. In the window that opens, set the value you need, then click the “ Apply", and then " OK».

note that editing this option is not available in all editions of Windows 10.

How to enable/disable JavaScript in Internet Explorer?

To enable JavaScript processing in Internet Explorer, do the following:

1. Click on the gear icon in the upper right corner. In the menu that opens, select " Browser properties»:

2. In the window that appears, switch to the “ Safety", zone " Internet" and click on the button " Another…»:

3. In the new window, find the section “ Scenarios" and set the required values ​​for the items " Active scenarios" And " Run Java application scripts»:

Then click “ OK" in this window and " Apply" And " OK" in the previous one.

How to enable/disable JavaScript in Safari browser?

To enable JavaScript processing in the Safari browser, do the following.

1. On your keyboard, press the following key combination at the same time:

after which you will see a window with settings. An alternative way to open the settings window is through the menu, which opens by clicking on the gear icon in the upper right corner.

2. In the window that appears, you switch to the “ Safety" and cancel the items " Enable Java" And " Enable JavaScript»:

Then close the settings window by clicking on the cross in the right corner.

Javascript is OFF in your browser

Your browser:

These settings are based on a desktop computer as an example. They also apply to mobile phones and tablets.

Google Chrome

Click on the menu image (three dots) in the upper right corner:

and select Settings:

Find the “JavaScript” item and click on it:

To enable or disable JavaScript, change the position of the switch:

Here we check that the site we need is not among the exceptions.

Yandex browser

Click on the menu image (three dashes) in the upper right corner and select Settings:

Click on the button Show advanced settings:

And press Content Settings:

Allow JavaScript on all sites (recommended) Disable JavaScript on all sites.

Mozilla Firefox

In the address bar enter about:config

I accept the risk!

Opera

Click on Menu in the top left corner of the browser:

Select Settings:

In the window that opens, go to the section Websites

And in the “JavaScript” subsection to enable it we install Allow JavaScript to run (recommended). To disable - Prevent JavaScript from running

Amigo

Click on the menu image (three dots) in the upper right corner and select Settings::

In the left menu, go to the section Settings:

And press Content Settings:

To enable “JavaScript”, in the section of the same name, set Allow all sites to use JavaScript (recommended). To turn off, set the switch to position Prevent JavaScript from running on all sites.

Vivaldi

Although Vivaldi is based on Chromium, it does not provide for disabling Javascript. In this browser it is always enabled.

Safari

Go to the tab Safety:

Check the box Enable JavaScript to enable it or uncheck to disable it:

Click on the gear icon in the upper right corner - Browser properties

Go to the tab Safety- select a zone Internet(selected by default) and click on Another...

Finding the point Scenarios- go to the sub-item Active scenarios- put the switch in position Turn on to enable JavaScript or Disable- to turn off

Edge doesn't have a way to disable Javascript. In this browser it is always enabled.

In the address bar enter about:config

We promise that we will be careful when clicking I accept the risk!

Find the “javascript.enabled” option

By clicking on the option twice, we change its value. True - Javascript is enabled; False - disabled.

The setting will be applied immediately. Now just close the settings tab.

VKontakte website does not open
DEC192009

Lately, many people have had problems accessing certain sites, such as yandex.ru, google.com, odnoklassniki.ru, vkontakte.ru, and also letters on mail.ru are not opened. If you are reading this, it means that, most likely, the VKontakte website also does not load for you, or a window appears in which you are required to send an SMS to unblock the site. There can be many reasons, so I will try to describe them all in detail, and also tell you how to eliminate them.
Correcting the HOSTS file
One of the most common problems due to which the VKontakte website does not open is the vulnerability of Windows, or rather one of its files - HOSTS, which converts domain names into the corresponding IP addresses. This file is often used by viruses that add additional lines there. On Windows XP and Windows Vista the file is located at:
WINDOWSsystem32driversetchosts
The clean HOSTS file itself looks like this:
# Copyright © 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
#space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a "#" symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
It may also be in the Russian version, but that doesn't matter. We open this file with any text editor (right-click on the file, then “Open with” and select notepad, for example) and if you see that your HOSTS file does not look right, then you need to fix it by deleting everything unnecessary. It happens that the HOSTS file cannot be changed because it is blocked by malware. In this case, you will have to fix it in safe mode. In order to boot the computer in safe mode, reboot it and press the F8 key while loading. A window with boot options should appear, in which we select “Safe Mode”.
Important: Do not forget that the HOSTS file does not have an extension; it should not be called, for example, HOSTS.txt.
For users of pirated versions of Windows, the HOSTS file may be duplicated in another folder on the computer, so I advise you to use the search to find it.
Delete the files svc.exe and vkontakte.exe
It also happens that the VKontakte website is blocked by malware. These programs need to be removed. Go to Start -> Search -> Files and folders -> Additional options -> Check all the boxes (search in system files, hidden files, etc.) and look for the files svc.exe and vkontakte.exe. If you find it, delete it.
After each method, you must restart your computer, and only then check whether you can access the VKontakte website or not. Be sure to install the latest antivirus software and update your antivirus databases, and then scan your computer, otherwise, after some time, you will have to correct the HOSTS file again.
In addition, you can also try accessing the VKontakte website through the vk.com domain; this simple action has helped many.
And one more piece of advice - never download various programs for Contact (viewing personal messages of other users, viewing closed pages, programs for downloading music from a contact, etc.) because most of them contain viruses, be careful. And also don’t forget to change the password for your page.
If the methods described above do not help, then try reinstalling Windows.

My browser: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; MRSPUTNIK 2, 4, 0, 270; GTB7.1; MRA 5.7 (build 03686); EasyBits GO v1.0; InfoPath.1)

Which is embedded in the html code of pages to give them greater functionality.

Thanks to the scripting language, the page becomes interactive or dynamic, which improves the contact with the user. The language is not used to write individual applications and only works inside the program, in the browser. Scripts do things on web pages that are not available. Scripts are executed if the user takes any action: moves the cursor, clicks, etc. Using JavaScript, a creeping line effect is created, pictures change after hovering the cursor, and questionnaires or registration forms are filled out.

If you disable JavaScript in your browser, you may not be able to view some websites or the pages will become static and therefore inanimate. How to enable JavaScript support?

The scripting language is supported by most modern browsers and is allowed for use in their default settings. But if for some reason it turns out to be disabled, it can be easily restored by following simple steps. How to enable JavaScript in different browsers?

In order to enable JavaScript in Safari, you need to launch the browser and click on the “gear” icon in the upper right. A menu will appear where you need to select “Settings”. A window will open in which you should go to the “Security” section. In the proposed list, check the box next to the line “Enable JavaScript” and close the tab.

How to enable JavaScript in FireFox? You must open the browser window or restart it if it is open. At the top left, click once on the orange FireFox icon and go to “Settings”, then to “Content”. Select "Use JavaScript". If you click the Advanced button, you can set a few more JavaScript options and click OK.

How to enable JavaScript in Chrome? Launch the browser, then call up the menu by clicking the special icon at the top right. where you need to go to the “Settings” line and click. In the tab that opens, at the very bottom, find the “Advanced settings” section. Then go to “Personal Data” and click on the “Content Settings” button. A window will open, at the very bottom of which there is an item “Allow JavaScript”. Check the box next to it and click “Finish”.

Internet Explorer

You need to open a browser window and click on the “gear” icon, which is located at the top right. In the drop-down menu, find the “Internet Options” section and open it in one click. Then go to the “Security” tab and click on the “Other” button. Scroll down the list to the “Run Java scripts” item, check the box next to it and click “OK”. Close the previous window.

How to enable JavaScript in Opera? You need to launch the browser and click the “Menu” icon in the window at the top left. A list will appear in which you need to find the “Settings” section and go to the “Advanced” subsection. Select the “Content” item in the list and check the “Enable JavaScript” box. Complete the setup by clicking the “OK” button.

If JavaScript is enabled in the browser, but the site you visit still displays a message that you need to enable its support, this means that it is being blocked by a firewall or antivirus program. You need to unblock JavaScript in the settings of these applications. The blocking may also be in the settings of the proxy server through which the connection to the Internet is made.