We mount the TV on the wall securely and conveniently. Wall bracket for a TV - how to make it yourself

An important task is not just to mount the TV on the wall, but to do it as comfortably and conveniently as possible. It is convenient to look at a screen hung close to the ceiling only from a lying position. Other positions may cause tension in the eyes and neck.

check the wall for its strength; plasma cannot be placed on a plasterboard surface, it simply will not withstand the weight;
turn to a professional master if you are not confident in your own abilities;
You can mount a TV on a wall alone only if its total weight is no more than 25 kilograms;
connection to the network is prohibited until the installation is complete;
When placing the TV, you should remember that air must flow to the back wall, otherwise the panel will overheat.

Proper placement of the TV is not only about installing it, but also about maintaining the interior design. The device can be framed with a special decorative frame or installed in a niche of a certain color. It all depends on the individuality of the interior.

Features of mounting the TV to the wall

Installation can only be carried out on a flat and clean surface, without protrusions or depressions.

The distance from the floor is at least a meter, and the distance to the nearest place where you watch the TV should be at least three times the size of its diagonal. It is possible to look at the screen without loss of image brightness if it is attached to the wall at an acute or right angle.

Avoid installation locations where the equipment may be directly exposed to sunlight. As a result, the image is lost and the surface may suffer. It is not recommended to install the TV mount on the wall near window or door openings.

When assembling the bracket with your own hands, it must be well fixed to the wall surface. For reliability, you can use a thick thread or belt.

Types of brackets

Devices for attaching plasma to a surface can be stationary or rotary.

In the first case, the bracket is simply installed against the wall, and the TV is permanently fixed in a certain position.

Rotary ones have more functions, but such devices are also more expensive. Rotary, in turn, can be divided into:

folding;
rotary;
tilt-rotary.

Brackets are produced in different sizes for different TVs. Mounts for a 32-inch TV on a wall are often tilt-and-turn, and for larger diagonals they are tilted and stationary. Everything is connected with a large mass of devices with wide screens. The option simply will not withstand the load.

Any type of bracket can be purchased at the store. The more, the higher the cost of the bracket. Therefore, it is not surprising that many people have a desire to make

Making a bracket with your own hands

Before starting work, you need to decide what kind of mounting for the TV on the wall will be in the finished version. A stationary bracket is easier to manufacture. You can save several times by not buying one for a large TV.

By preparing a drawing, you can understand what materials and tools will be needed for the work. Calculations can be done manually or using a computer program. The diagram can also show the reliability of the connection of parts. It must be at the highest level, otherwise the structure will not withstand the weight, and the long-awaited purchase will simply be broken into pieces.

Bracket made of bars

A simple wall mount for an LG TV and more consists of three bars, they are selected according to the length of the structure. Holes are made in one of them at equal distances from each other. This block will be attached to the TV body. This should be done carefully, without damaging the equipment.

Fastening is done using bolts. The second block is mounted on the surface; its fastening must be careful, also using bolts. There will be a third bar connecting the device to the wall; you can use it to adjust the angle of inclination. Then the entire structure is firmly fixed.

Pipe wall installation

A wall mount for a Samsung TV can be assembled from a rectangular pipe. Pipe sizes should be selected individually for your model, taking into account functionality.

If the distance is small, for example only 20 mm, then the panel will be tightly adjacent to the wall, and the ability to connect equipment will be difficult. At a large distance from the surface, for example 60 mm, there will be an opportunity to connect additional wires, but such a design looks ugly. The optimal option is a distance of 40 mm. And the pipe height can be 60 mm.

Its length depends on the length of the TV itself and the distance between the mounting holes. A 42" TV wall mount must be able to support its weight.

Making a wall mount

Having decided on the dimensions, you can prepare the desired pipe. Next comes marking for the holes. On the pipe itself you need to make holes with a diameter of 10 mm for mounting the TV, and for mounting on a wall - three more with a diameter of 8 mm.

They are marked at the same distance from each other and from the edges of the pipe.

The grooves for the TV mount should be tortuous, this will prevent accidental lifting or displacement.

The pipe can be attached to the wall using different devices. If it is brick, then it is better to use dowel-nails; if it is wooden, then use self-tapping screws. The main thing is to complete the main task - a strong fastening. Then the workpiece can be given a noble appearance by painting it. This rectangular pipe piece will be attached to the wall.

Attaching parts to the TV

bolts - 2 pieces with a diameter corresponding to the thread for mounting on the TV (in this case, 20 mm M5);
washers - 4 pieces with an internal diameter of 5 mm and an external diameter of 20 mm;
rubber bushings with an internal diameter of 5 mm, with an external diameter of 10 mm, they must coincide with the diameter of the grooves in the pipe.

If necessary, the TV mount on the wall can be adjusted in tilt; for this, one of the bolts can be used longer, and a lock nut can be installed on it, which will adjust the rotation.

Making stops

In order for the bolts to gently rest against the wall, you can put rubber pads on them, which can be made from scrap materials, for example, from an old hose from a car. The TV is installed with two screws with stops and bolts with washers and bushings. The TV comes with special mounting tapes; they also need to be secured.

We assemble the entire bracket at the installation site.

First, we attach the prepared pipe to the wall using nails or self-tapping screws. It is more correct to carry out installation using a building level. Next, hooks are made opposite the loops attached to the TV.

Now you can make wall mounts for your Samsung TV. It is better to do this with an assistant, even if the panel weight is small. You should hang the TV, adjust the angle and secure it firmly.

How to hide cables?

When installing the panel permanently in a specific location, it is correct to hide the cables in a hole in the wall.

To do this you will have to cut a channel. If the feasibility of such a channel is in question, you can simply cover the wires with a special plastic box. It can be purchased at any hardware store. Initially it is white, but it can be painted to match the interior or made contrasting. You can cover the box with wallpaper in the same color.

So, we found out how to make a wall mount for a TV with your own hands, so as not to resort to the expensive help of professionals.

After purchasing a new TV, many people have difficulty finding a compact and easy-to-watch TV. Since very often there is not enough space in the room for which this household appliance was purchased, mounting the TV on the wall using special holders (brackets) becomes relevant. Such brackets will allow you to securely mount this equipment on the wall, thereby saving room space. We will talk about what these fasteners are, what types they come in, and how to make them yourself in this article.

Read in the article

Advantages and disadvantages of hanging a TV on the wall

The advantages of wall mounting for a TV include:

cheapness– a diverse assortment allows you to choose such a mount at a price affordable for any family budget;
safety– correctly installed fastening will eliminate the possibility of fragile and expensive equipment falling;
possibility of changing position– the design of such brackets provides for positioning the display under any convenient position for viewing it angle;
complete independence of the choice of bracket from the interior of the room– since the mount is located behind the back wall of the equipment and is almost invisible, its appearance does not affect the interior of the room.

The main disadvantages of TV wall mounts are:

installation skills required– a self-fixed bracket, in the absence of special skills, experience and appropriate tools, can cause expensive equipment to fall and fail;
inability to move— in order to move the suspended equipment to another place, you will have to completely dismantle the bracket and reattach it;
When dismantling, clearly visible marks remain from the fastening, which entails the need to finish all the walls of the room;
damage due to long-term use– low-quality and very cheap fasteners become damaged and fail during long-term use, creating a risk of equipment falling.

How to properly hang a TV on the wall

In order to understand how to hang a TV on the wall using a special bracket, you need to decide on the location and height of its installation.

Choosing the right place for hanging

When choosing a place to mount this household appliance on the wall, factors such as:

display dimensions– for installation, you should choose walls with a large free area;
strength and load-bearing capacity of wall material– loose materials (foam concrete, plasterboard) have a lower load-bearing capacity than concrete, brick, wood;
frequency of furniture rearrangement– the mounting location of the bracket should be chosen in such a way that during various rearrangements of furniture, the screen is in the normal visibility zone;
proximity of cabinets, shelving and other furniture– for better cooling, the mount should ensure that the TV is located away from cabinets and shelving;
location of sockets– they should be located in close proximity to the TV so that they do not have to be connected using extension cords.

Choosing the optimal TV installation height

The installation height of the TV is selected in such a way that the person watching it does not have to raise or lower his head; for this, the entire structure is mounted at eye level of the person sitting on the furniture.

Important! If you are not confident in your abilities or do not know how to properly hang a recently purchased TV on the wall, then it is better to seek help from professional installers. For a small fee, they will securely mount the bracket on the wall and fix your expensive equipment on it.

Overview of the main types of TV mounts

When choosing a wall bracket for a TV, many are faced with many models of this device. Among this variety, the most popular wall mounts are the following types:

rotary and retractable;
tilt-rotary;
corner.

Advantages of the swivel-and-slide type of wall-mounted TV bracket

The swivel-and-slide-out bracket for mounting a TV on a wall consists of the following components:

two levers – a short single and a long double – hingedly connected;
TV mounting platforms.

Thanks to its design, this mount allows you not only to change the angle of the TV horizontally by 60-90°, vertically by 10-12°, but also, thanks to the hinged connection of the arms, to extend the TV to a great distance from the wall.

Using a Tilt and Swivel TV Wall Mount

Unlike the previous type, the tilt-and-swivel TV bracket has a simpler design, consisting of:

areas for attaching the bracket to the wall;
one-piece lever with a rotation mechanism in the vertical and horizontal plane;
platforms for attaching to the bracket of a suspended TV.

Such a mount will provide a change in the angle of rotation of the TV in the horizontal plane up to 90°, vertically up to 20°.

Features of corner TV wall mount

A bracket for mounting a TV on a corner-type wall is used if it is not possible to fix it in another place due to the large number of shelves, cabinets and other furniture. This mount consists of the following parts:

lever - composite with a hinged connection between parts or single solid;
corner wall mount.

Depending on the design of the lever, such a bracket can not only change the angle of inclination of the display vertically and horizontally, but can also move it to one of two walls joined in the corner.

How to choose a TV bracket - highlights

Before purchasing a mount, you need to choose the model that is best suited for specific conditions - for this you need to know how to do it correctly. In order to choose a bracket for mounting your TV on the wall, you need to consider the following factors:

distance between mounting holes– it must coincide with the same indicator between the holes on the back panel of the equipment;
dimensions and configuration (shape) of the mounting plate– the plate should not block the ventilation holes, impair access and connection of wires to the connectors;
weight supported by the bracket,– in order for all mounting structures to withstand the load from the equipment being mounted, you should look at its weight in advance in the passport and select a bracket that can withstand it;
fastening type− if the space of the room is limited, then tilt-and-turn or corner-type brackets for mounting the TV on the wall are more suitable. For rooms where the area is large, it is better to choose tilt-and-slide mounts;
presence of channels for wires and cables will allow you to compactly and neatly lay the wires and cables running from the connectors to the sockets, the modem.

A comment

Consultant for the retail chain "M-Video"

Ask a Question

“When choosing a TV mount (swivel, extendable, swivel-tilt, corner), purchase a model with characteristics higher than what you need. This will allow in the future, when replacing one model with a newer one, not to purchase an additional new bracket.”

Review of the main ways to hang a TV on a wall without a bracket

If it is not possible to purchase this device, then you should figure out how to quickly and cost-effectively hang a TV on the wall without using a bracket. You can do this in the following ways.

Using a square thin-walled metal profile

To do this you will need a square pipe 20x20 mm and 15x15mm, two M8 bolts, 4 M8 nuts. The manufacturing process of such a device is as follows.

Photo	Description of work
	Cut the pipes to size: from a profile with a cross-section of 15×15 mm we make two blanks with a length slightly greater than the distance between two holes located in the same vertical plane for mounting on the back wall of the TV; From a profile with a cross-section of 20×20 mm, we also make two blanks 3-5 cm long less than the previous ones.
	We drill holes in the pipes: in a profile with a cross-section of 15×15 mm, we make three holes with an 8 mm drill, two of which are located at a distance equal to the same distance between two located in a vertical plane on the back wall of the TV, and one is 5-7 cm below one of the ends of the profile; in a 20×20 mm profile, we drill two through holes of 8 mm with a distance from the ends of 2-3 cm. Having made a distance from one of the outer holes, three more are drilled: the top one with a large diameter drill (14-16mm), the two bottom ones - with a drill by 8 mm.
	Three holes of different diameters on each profile with a cross-section of 20×20 mm are combined into one using pliers and a drill.
	All holes for removing burrs are processed with a round file; holes with a diameter of 8 mm are additionally drilled to a shallow depth with a drill with a diameter of 10 mm. The workpieces are thoroughly cleaned on all sides with sandpaper.
	Two parallel edges of the M8 nut are ground with sandpaper so that it fits tightly inside the profile with a cross-section of 20x20 mm.
	The workpieces are degreased and painted with black powder paint for metal.
	We insert a turned nut inside the 15×15 mm profile and place it opposite the hole located between the outermost ones. We screw a lock nut onto the bolt, insert it into the hole indicated above and screw it into the nut located inside the profile. To finally fix the bolt, tighten it with the upper lock nut.
	We fasten the 15x15 mm profiles using bolts to the mounting holes on the back wall of the TV.
	Two profiles with a cross section of 20x20 mm are attached to the wall at the same distance as thinner profiles attached to the back wall of the TV.
	The TV is mounted on the wall - the bolt heads are inserted into the corresponding holes on the profiles fixed to the wall, after which the fastener is slightly lowered under the weight of the device and securely fixes it to the wall.

Using two corners

You will need two aluminum corners 30x30 mm, 4 M8 bolts, 2 M8 nuts, 4 M8 washers.

Photo	Description of work
	On one of the shelves of the corner we make two holes with a distance equal to the same between two mounting holes located in a horizontal plane on the back wall of the TV. On the second we make holes with a slightly larger distance.
	The second corner is 10-15 cm longer than the first. On one of its shelves, two pear-shaped holes (hangers) are made - for this, a hole is first made with a large and then a smaller diameter drill. On the second shelf, holes are made with the same distance as on a similar one at the first corner.
	The corners are folded together with shelves with matching holes and connected with bolts.
	The resulting structure is screwed to the back wall of the TV using bolts.
	On the wall, at a distance equal to the same distance, we make two holes between the hangers, drive dowels into them and screw in self-tapping screws.
	By inserting the screw heads into the hangers, we mount the TV on the wall.

How to make a TV bracket on the wall with your own hands

In addition to purchased models, you can also make a wall mount for your TV yourself.

From the mounting rail

A reliable and simple holder for an LCD TV can be made from a simple furniture tire using the following technology.

Photo	Description of work
	We drill two holes in the wall, insert dowels into them and screw in rectangular hooks (crutches).
	A rail with pre-drilled mounting holes at a certain distance is screwed to the back wall of the TV using bolts.
	To ensure that the back cover does not touch the wallpaper, bolts are screwed into the lower mounting holes, the heads of which are closed with plastic plugs.
	To prevent the bolt heads and plugs from damaging the wallpaper, we cover them with special paper stickers.
	The TV is hung on hooks and connected to the power grid, the Internet, or cable television.

From a wooden plank

A fairly simple to manufacture and reliable mount for an LCD TV can be made with your own hands from a wooden plank according to the following instructions.

Photo	Description of work
	We fold and clamp in a vice two boards 400-450 mm long, 25-30 mm thick so that the long edge of one of them protrudes 5-10 mm.
	We mount the TV on the wall, combining the cuts on two boards. To ensure that the equipment does not jump out of the mount, two additional screws are screwed into the sides.

At what price can I buy a wall mount for a TV?

You can purchase the types of factory brackets described above in the following places:

On the market;
in a specialized household appliances store;
online store.

Table. Average prices for various types of brackets for mounting a TV on the wall, rub.

Bracket type	Maximum screen diagonal supported for mounting on this bracket, inches
Bracket type	26	32	40	55	65
Swing-out	600−800	1000−1200	1300−1500	1500−1700	2000−2200
Pan-tilt	400−600	800−1100	900−1000	1100−1300	1500−2000
Angular	800−1000	1200−1500	1500−1600	1700−1800	2000−2200

The most convenient and profitable way to buy the required type of wall mount for a TV is in trusted online stores of household appliances that have a long history and good reputation. Unlike a market point or hypermarket of household appliances, an online store has the lowest prices due to the absence of the need to pay rent for premises or salaries to staff. Buying a bracket on the market does not bode well - a market product is designed for a wide range of consumers, as a result of which, at a low price, it has the same quality.

Conclusion

Mounting a TV on the wall is convenient and reliable. It cannot be thrown off by a child or an extremely frisky pet. In addition, such placement of equipment allows you to save space and make the interior more modern and attractive.

Almost every family has a television, and some of them have two or more televisions. Each person has it for one purpose or another, but most often it is needed for a pleasant time with loved ones, and is very popular among friends. Modern youth are not even interested in watching any regular channels on it, because they prefer to watch their TV series on it from the Internet or watch various videos on YouTube; modern TVs are also widely used for various games on XBOX.

Since the TV can be mounted in any part of the room, its position is determined according to the individual preferences of the person who wants to place his brand new TV in a place convenient for him. This place is selected for each interior separately.

No one has yet come up with restrictions on the specific location and fixation of the TV on the wall, so it can be hung absolutely anywhere in the room. But they consider it a rule to hang modern televisions at a level of at least 1 meter from the floor, and also so that the tap is at eye level.

To fix your TV, you can call a specialist in this service or fix it yourself. In order to do this yourself, you need to have basic knowledge of precise measurements, as well as know how to attach screws to the wall. Hanging a TV is not a hard job and can be completed in a couple of hours. You shouldn’t do this yourself, because it will be better if someone supports the TV while attaching it to the bracket.

Preparing for installation - 3 main rules

In order to properly hang a TV, you must adhere to three main rules:

Study the characteristics of the equipment in detail. Directly to install any type of TV, you need to know its diagonal, weight and type of TV. This information must be in the documentation of the purchased equipment. If your device weighs more than 25 kilograms, then installation must be done by two people.
We determine the type of wall on which the equipment will be installed. It is usually made of wood, brick, concrete or made of plasterboard. At the same time, a selection of tools, brackets, fasteners and fittings that will be needed directly for installation is made.
Find out the location of the electrical wiring on this wall. This will help us better hide wires and cables, and also not disturb the overall electrical wiring system.

Let's start with the good, namely the advantages. Manufacturers of modern TVs help us with this. They are working to make our TV screen as compact as possible. This allows us to save space, which will make our interior more spacious. And the flat screen will be the highlight of our interior; it will perfectly decorate the wall, and absolutely, it doesn’t matter whether your interior has a retro style or a modern one.

Also, an additional advantage is that modern equipment is more resistant to mechanical damage. Therefore, if your TV falls on the floor, there are many chances that it will remain in working order.

Now we can talk about the shortcomings.

There are 3 main disadvantages of a wall-mounted TV (during installation):

If it falls, for example due to a poorly secured bracket, your TV may fall completely out of position.
Hanging a TV on the wall is more difficult than simply placing it on a table or cabinet, so you will need the help of another person, especially if the entire diagonal of the TV is quite large.
It is strictly prohibited to mount a TV weighing more than 35 kilograms on weak walls (plasterboard), as well as above heating devices.

Despite the disadvantages of a wall-mounted TV, it is very popular and quite easy to install if you follow the basic rules for its installation.

Types of fasteners

Wall mount, the same bracket, is a special mount that is used to mount a modern TV to a selected wall. There are 4 types of fasteners in total, their main difference is that each of them can adjust the position of the screen in its own way, thereby increasing the comfort of watching TV.

Before you buy a bracket, you need to be sure that it will fit your TV model. To do this, you need to ask what standard the bracket is and compare it with the standard for mounting our modern TV.

Let's take a look at 4 famous wall fasteners.

A rigid low-profile mount is a mount that attaches your TV 10-20 centimeters from the wall. The rigid fastener does not have an adjustment function, that is, after installation, with its help we will not be able to turn or tilt the TV. For this type of mounting, we recommend hanging your TV at head level for ease of viewing various programs and TV series.

The advantages of this type are low price, safety, and ease of installation.

The disadvantages include several factors. There is no position adjustment, as well as difficult access to the TV connectors that are located behind it.

With this mount, you can change the angle of your TV, install it at your eye level, thereby adding to the comfort of watching TV. The distance from the wall to the bracket is up to 15 centimeters. The angle of inclination varies between different brackets, but generally it is in the range of 10-25 degrees.

The advantages of this type are its affordable price, simplicity of design, and most importantly, it allows you to adjust the tilt of your TV.

The only disadvantage of this type is the lack of rotation of the TV.

This mount is unique because it can be used to move, rotate or tilt the TV as you see fit. This bracket is quite expensive, but it is worth it. Yes, it has restrictions on the size and weight of your TV, this can be found in the documentation of a specific bracket model, but we are confident that you can choose a good and fairly productive bracket at an inexpensive price.

The advantages include ease of use and beautiful appearance.

The disadvantages include the expensive cost of the bracket, as well as the difficulty in installing this fastener.

This mount is quite popular in various offices and establishments, as it is convenient to provide advertising to visitors and colleagues. It allows the TV to rotate 360 degrees and also allows the screen to tilt. To use them you must have high ceilings.

I think everything is clear about the advantages, but the disadvantages include difficulty in installation, as well as in supplying the cable, which, most likely, will be easier to run under the ceiling than to the floor.

We list these restrictions in the following list:

It is allowed to install only thin TVs such as LCD, LED and Plazma
On your TV, all connectors should be exclusively on the sides
The installation height should be no more than 1.5 meters;
After installation, it is very difficult to move the TV;
The opposite wall must be covered.

If you are going on a wall that is based on brick, then you can safely proceed with installation. But here we will give you some useful tips:

The TV should be hung so that it is at eye level, naturally, when you are in a sitting position.
The distance from the TV to your eyes should be equal to the diagonal of the TV multiplied by 3.
There is no need to calculate the length of the bolts, since each set with the TV comes with bolts of a certain length. They should be used.
On the opposite side, it is necessary to mount a plate (iron) about 5 cm higher and wider beyond the distance between the holes when mounting on the back of the TV.

How to hang a TV on the wall - step-by-step hanging instructions

To make it easier for you to navigate the installation, we have provided step-by-step instructions for it. Now you can easily carry out installation.

Step 1. First, you need to choose the height of the TV. In order to do this, we sit down at the TV viewing point and select the most convenient viewing area for vision.

Step 2. You should mark the proposed TV diagram on the wall. For this we need a building level, a tape measure and a pencil. We look at our mount and mark points on the wall (as in the photo below). Don’t forget to check the horizontality of the holes that we will have; if there is even a slight distortion, this could threaten to cause the TV to fall. Therefore, we take this matter seriously.

Step 3: For this step we will need a drill. We will use it to drill holes at the indicated points.

Step 4. Using a hammer, drive the dowels into the holes, then carefully fix the brackets on the wall. Be careful with plasterboard walls, only take on this task when you are sure that your plasterboard will support your device.

Step 5. After installing the bracket, prepare the TV. Carefully insert it into the guides or tighten the bolts without much effort.

Step 6. Connect the TV to the power supply and start watching. We advise you to hide all the wires in a plastic cable so that the interior of your room is in perfect order and there are no wires in it. We can move the sockets behind the screen, using this method we will hide our wires

Now you are familiar with the instructions for mounting the TV on the wall. Watch the video to complete the entire sequence and learn a couple of nuances.

Before attaching the plate to the wall, you need to find out what material the wall is. If it is plasterboard or wood, we use special dowels, and if it is a concrete wall, then it is necessary to use dowels directly for the concrete.

In this section we will talk to you about the questions that people ask when they are planning to hang a TV on the wall. These questions, as well as the answers to them, are very useful for those people who are going to mount their TV on the wall.

What diagonal size is most suitable for mounting a TV on a wall?

Most people think about it and are going to buy plasmas for the floor of the wall, but before you do this, you should know whether the parameters of the room will allow you to place such large screens that your health will not deteriorate. After all, you can still buy a TV with a large diagonal, but we must think about our health.

A comfortable distance for vision is equal to 3-4 screen diagonals. In other words, if you have a 40-inch screen, then you should watch it from at least 3 meters away. Since 120 inches is approximately equal to 3 meters.

Many TV fans dream of a large plasma on half the wall. Buying such a TV is not difficult, but before you do it, check to what extent the parameters of your room will allow you to watch such a monitor without harm to your health.

Quite a lot of people do not take this rule into account, and thereby spoil their eyesight, and in a very short time. We ask you not to repeat their mistakes and adhere to this rule.

What should be the height between the floor and the TV?

The height is determined only by where you will place your TV, the main thing is that it is comfortable for you to watch it. It won’t be convenient for you to lift your head and watch TV from under your forehead. For example, if you are going to hang your TV in the kitchen, then in principle you can hang it from the ceiling, but on the sofa it will most likely be uncomfortable to look at the ceiling in the evenings.

In fact, there are no standards, so there is no reason. Sit in the place where you want to watch TV and choose a place for the TV on the wall.

This question is quite popular, especially for those people who have already hung their TV on the wall. And it is much more difficult for them to hide the wires than for those who were interested in this issue at the beginning of mounting the TV on the wall.

So, if you are currently renovating, then you need to arrange sockets directly for the TV. This will require 1 TV socket and at least 3 sockets behind the screen. We will connect the TV, Wi-Fi, and also the tuner to these sockets. The best method is to hide all these sockets directly behind the TV, this is very convenient and very popular.

But if there is a cabinet under your TV that will have other equipment, then it is better to take care and make a couple more sockets in advance, even behind the same cabinet.

We recommend placing about 5 sockets at a distance of 30 centimeters from the floor, and even if you think that you won’t need them, you are deeply mistaken. After all, now technology is developing very quickly, and no one knows what else they will come up with for the TV in 3 years, but sockets will always be needed, and you won’t need to use carriers. After all, carrying items reduces the beauty of any interior.

If the repair has already been done, then the best way would be to hide all the wires in a box cable and connect it beautifully to the TV so that it does not bother anyone, and is especially not conspicuous. An excellent way out of the situation would be if you design this cable box to match the style of your wall. After all, it is on it that he can hang quite unnoticed; in other words, it can be called a camouflaged box.

But if your TV is located near a window, then the best way to hide the wires is to use curtains with an electric curtain rod. Make a socket right under the ceiling, near the place where the curtain will be. And this will be a great discreet method to hide your wires. You can ask a curtain specialist or an electrician for more details.

We advise you to familiarize yourself with this section; after reading it, you will learn how to make sure that your equipment serves you for a very long time. And also how to prevent the TV from falling off the wall. Be sure to keep these tips in mind when mounting your TV on the wall:

Before purchasing a bracket, you need to check the weight and diagonal that it can support.
Although the swivel mount is very popular and convenient, we advise you to use only a fixed mount. After all, only with it can you be as sure as possible that your TV will not fall to the floor.
Recently, it has become very popular to install a TV in a plaster niche. But be careful, because air circulation, which will heat up and over time overheat the case, can become an expensive failure. Therefore, be extremely careful with this type of installation.
A good method for securing your TV is a small homemade stand made from drywall. It can be done in a short time, but in turn, safety will increase significantly. We kindly ask you not to place the screen over the fireplace or other types of heat release. The TV is negatively affected by the radiated heat and may quickly malfunction. And the saddest thing is that no one will return your money for this, because this is stated in the documentation of every modern TV.
Before connecting cables from the TV, securely mount the TV to the wall. Only then start connecting the wires. And keep in mind that if you have a rotating bracket, then you must make sure that there is enough wire to rotate the screen; there should be no tension at all. The distance from the viewing area directly to the screen should be from 3 to 4 diagonal sizes. Namely from 2 to 4 meters.

In fact, hanging a TV on the wall is a responsible undertaking. You just need to make a little effort and the TV will look worthy in your interior and will also perfectly decorate your wall.

After reading the article, you have learned how to properly hang a TV on the wall, we wish you success!

How to properly hang a TV on the wall so that it fits perfectly into the interior and at the same time is available for viewing from different angles? This article provides basic recommendations for installing a wall-mounted TV.

The place where the Samsung, LG or other popular brand plasma panel will be placed should be chosen very carefully. Designers recommend considering the following factors:

Plasma dimensions (height, width).
How often is the apartment renovated or furniture rearranged?
Consider the wall finishing material (plasterboard, concrete, wood).
It is not recommended to hang TVs in narrow openings; there is a high probability of overheating of the equipment.

bracket

The mount for Samsung and Sony TVs should be chosen based on personal preferences. They come in different types.

Fixed – allows you to firmly secure the screen, but such a secure fastener does not allow you to tilt or rotate the device.
Tilt is one of the most popular types, as it allows you to tilt the TV at the desired angle.
Tilt-and-turn - installed even under the ceiling, it is equipped with a rotating mechanism. This type of fastener is considered the most functional.

Before hanging the plasma, you need to choose what height the device will be placed at. It is recommended that the bottom edge of the panel be at a distance of 0.8 to 1 meter from the floor.

If the plasma has a diagonal of 25 inches, then a distance of 2.5 meters is considered ideal. The LCD can be viewed from any distance.

Bracket Installation

Instructions for installing a TV bracket on the wall with your own hands.

Mark the points where the TV wall mount will be located. Measure the distance using any available measuring tool (tape measure, ruler).
Attach the wall-mounted TV mount to the markings.
Make holes and insert dowels into them.
Place the structure against the wall and secure the bolts.
If the bracket is installed, you can attach the plasma panel to it.
Afterwards, you need to adjust the fasteners for maximum comfort during viewing.

This is the classic way to install a regular TV bracket on the wall. But before installing it, it’s worth knowing.

Plasma panels with a diagonal of 42 inches or more can be mounted without a bracket, since the developers have provided for this nuance. Therefore, such devices already have a special device for hanging the monitor.

If a person does not find such a device on his TV, then he can make a TV mount on the wall with his own hands.

How to make fasteners yourself

You can do a simple DIY mounting of the TV on the wall yourself. To install a device with a diagonal of 42 and 32 inches, you must follow the instructions.

Instructions on how to make a wall mount for 32 and 42 inch TVs with your own hands:

To prepare four aluminum corners, you will also need one bicycle spoke. The dimensions of the corners are not of fundamental importance, the main thing is that they coincide with the holes in the screen body.
Make two holes in the parts for attaching to the plasma, and at the top, make one hole (for the knitting needle).
Attach the resulting structure to the TV (rear panel).
The remaining elements must be attached to the wall. Using a drill, make two notches (for diagonals larger than 42 inches, more is possible), as well as one at the top for a knitting needle or a thick nail.
Then you need to mark, all holes must be parallel to each other.
The distance between the aluminum corners should be slightly less than on the installed panel parts.
The fasteners are ready, all that remains is to mount the TV on the wall.

Installation of the TV is carried out according to the following scheme:

Take the 42-inch screen and carefully align it with the wall mounts.
Then you need to insert the knitting needle (the knitting needle can be replaced with a thick nail).
A 32 or 42 inch TV wall hanger is ready.

This is the easiest way to hang a TV on the wall without a bracket.

Plasterboard wall

How to mount a TV on a plasterboard wall? – a common question from owners of plasma monitors. You can hang a TV on a plasterboard wall using different methods; one of the simplest options is to use a butterfly dowel for installation. But you should know that installing a TV in this way is not suitable for all TV models. The weight of the plasma should be no more than 25 kg, and the diagonal of the device should be 42 and 32 inches; if the hung screen is larger, this will lead to the destruction of the wall.

The most optimal way is to hang the TV on a plasterboard wall using a pin-screw; it is suitable for concrete and wooden surfaces. The size of the stud is selected taking into account the gap between the drywall sheet and the wall itself. The deeper the screw is screwed in, the more weight it can hold. Since all the weight will be supported by the main wall, as a result of which the destruction of the drywall will not occur.

Another equally pressing question is how to install a TV on the wall if the plasterboard sheet is used only as a partition. In such situations, it is not recommended to hang the TV on the wall; it is better to install it on a special stand. Using such a cabinet is no less convenient, since thanks to the rollers it can be rotated in different directions. Therefore, it can be installed at different angles.

Another best option for how to properly hang a TV on a fragile surface is to use a chipboard panel, which needs to be very firmly fixed to it. Then fasteners are hung on this wall. Then you can install the TV on the bracket. This option is also suitable for large screens.

Ceiling fastener

If the above methods how to hang a TV on the wall with a bracket or without it are not suitable for the user. You can use the ceiling mounting method. This option is very convenient; there are different models.

When choosing a ceiling bracket, it is important to consider the following factors:

height of the room where the panel is installed;
device weight and diagonal;
ceiling material.

Mark the place where the equipment will be located.
Make holes using a hammer drill.
Attach the mount to the ceiling.
Attach the necessary cords to the rod.
Move the barbell towards the mount.
Attach the monitor to the bracket and connect.

It is most difficult to install ceiling fasteners to a plasterboard ceiling; it is recommended to use butterfly dowels. During fastening, such a dowel not only goes into the drywall, but also “pierces” the metal sheathing. The main advantage is considered to be maximum savings in apartment space.

Basic installation rules

During installation, it is important to observe the following rules:

TV wall mounts must be strong.
Connect connecting elements only after installing the TV on the bracket.
Panels weighing more than 25 kg are best installed by two people.
Before installing the device, be sure to check how the electrical wiring is laid in the walls.
For each type of wall, you must use the appropriate dowels.
It is necessary to leave space for free passage of air.
For high-quality fasteners, use drills slightly smaller than the diameter of the screws.
When tilting and rotating the monitor, the connecting cord should not bend or be stretched too much, otherwise a break may occur, and as a result, the equipment may catch fire.
Do not place the equipment near heating devices.

Where to put the wires

It is better to hide plasma wires from LG or another popular brand. The easiest option is to remove all cords behind the monitor. This action must be performed carefully so as not to damage the wires.

You can also hide the wiring in special boxes; thanks to such devices, the equipment looks neat and aesthetically pleasing.

You can use moldings; in such cases, the connecting elements are removed into tubes. If it is not possible to hide the cords, then you can decorate them, stick flowers or other decorations. Thanks to this solution, the cords will become a design element.

These are the basic recommendations on how to hang a TV on the wall with your own hands. Typically, a person does not have difficulty securing equipment. Since the instructions for each model describe in detail the possible installation options. If you cannot hang the panel yourself, it is recommended to contact a specialist.

No home is complete without a TV. It’s so nice in the evening after work, with a cup of tea or a glass of wine, to relax on the sofa in front of the TV hanging on the wall. After all, this option for placing the TV does not require much space and it is much more convenient to watch it than if it were standing on a cabinet or coffee table. But how to attach the TV? Let's figure it out.

How to choose the right place on the wall for your TV

When choosing a place for the TV, you should take care of safety and convenience when watching it. Therefore, you should use the following rules for monitor placement.

Selecting a part of the room for the TV. It all depends on the arrangement of your furniture and the location of the windows. Sit in the place from which you plan to watch and choose the most comfortable point for your eyes. Don't forget to take into account the dimensions of the television panel.

Advice. Do not place the TV in front of windows. Glare and glare on the screen will not let you relax.

Comfortable height. The optimal height is at eye level. Therefore, you should also take into account the audience who will watch TV with you. You can hang it a little lower or higher, it will depend on the characteristics of the room. For example, a panel with an impressive diagonal should be hung slightly above your eyes, and if you prefer to watch TV on the floor, lower it lower.
Wires and cable. It's not nice if all the wires are just hanging out from under the TV. They need to be hidden. It’s good if during the repair you thought through everything and brought the socket and cable directly behind the TV. Otherwise, use a cable box and decorate it to match the style of the room.

Advice. When making repairs, it is advisable to place a block of 4-6 sockets at a height of 30 cm from the floor. Today, technology does not stand still, and such sockets will certainly come in handy.

How to attach a monitor to a wall. Basically, three methods are used: a bracket, without a bracket, and mounting the TV to the ceiling.

TV mounting methods

Mounting with bracket. Bracket translated from German means holder. This device is used to mount objects on a vertical surface: the device will help you hang the TV on the wall.

Today there are many brackets available in stores and they are divided according to certain criteria:

inclined - suitable for small TVs up to 26 inches diagonal;
movable – used for mounting a flat monitor with a diagonal of 13-26 inches.

The holder is equipped with a rotating lever, thanks to which you can change the angles of inclination to the sides and up and down;

low profile - designed for a maximum of 40 inch TVs;
adapter - adds width, supports a panel no more than 65 inches;
hinged structures - with their help you can rotate the TV in any direction.

Mounting a TV without a bracket. This method is used when it is not possible to hang the monitor on the wall. Here a special frame is used, on which the TV will then be hung.

Ceiling option. This is the same bracket, it is simply fixed to the ceiling. Before purchasing such a hanging mount, you need to determine what kind of finish you have on the ceiling and how high the ceilings are.

How to attach a TV to the wall with your own hands using a bracket

The easiest way to hang a TV on the wall is to buy a bracket for this. Having decided on a TV mount, we can begin installing it using the following tools:

screwdriver;
roulette;
screws.

We start by attaching the TV to the bracket plate.
We try it on the wall and make marks at the attachment points.
We make holes according to the marks.
We place the structure against the wall and attach it.

With a minimum of effort on your part, your family will be able to get together to watch interesting films.

How to attach a TV to a wall with your own hands without a bracket

You will need the following tools:

electric drill;
screwdriver;
roulette;
screws or dowels, depending on the wall material;
hammer.

Take, for example, a TV with mounting holes located at a distance of 20 cm in both width and height. For such a monitor you will need a 24 x 24 perforated plate, you can take more.

Using a tape measure, mark on the wall a place to mount the TV.
We make holes in the wall according to the marks.
We drill holes in the plate identical to the holes on the back of the monitor.
We fasten the plate to the TV with 4 bolts (included with the TV).
We apply the plate to the wall and fix it with dowels.

The work is finished, you can enjoy watching TV programs.

How to attach a ceiling bracket with your own hands

Tools you can't do without:

electric drill;
drill;
screwdriver;
roulette;
dowels;
hammer.

Having collected the above tools, you can begin installation work.

We make a mark on the ceiling and drill holes for attaching the bracket rods.
We attach the rods to the holes and fix them with dowels.
We secure the removable part of the bracket with bolts to the back of the monitor.
We connect both parts. We connect the part with the already attached TV to the rod and fix the connected parts.
We finish the work by installing protective decorative caps.

This is one of the affordable ways to attach a TV to the ceiling. The whole structure looks original and gives the room a feeling of spaciousness.

To ensure safety and facilitate the TV installation process, you should use the following advice from experienced specialists:

1/8-inch drill bits are best for installing the structure. This diameter is smaller than the mounting screws, so they will fit closely.
Do not hang TV monitors that weigh more than 30 kg on walls made of plasterboard.
Televisions that weigh more than 20 kg and their width exceeds 1.5 m need to be hung by two people; it will be difficult for one person to cope with this task.
Cables should only be connected after complete installation.
To avoid breakage and fire of the power cable, make sure that it is not bent or taut.

Monitor the work process so that when drilling you do not get into the electrical wiring hidden in the wall. Check the technical plan of the house or apartment where your wiring is located.
To fasten the above-mentioned structures, use specially designed dowels of different sizes.

The screen, which can be hung on the ceiling or on the wall, solves many problems. With the help of such systems it is easy to hide cosmetic defects in your apartment. This structure saves a lot of space and looks very impressive. In addition, a hanging TV can always be interestingly combined with decor, while creating an emphasis on its presence in the room. Thanks to modern metal structures that help hold the TV, you can set the tone for the entire room and bring to life the most daring and interesting design solutions.