The iPod shuffle turns on, what should I do? Charger for iPod shuffle, instruction manual

Apple products are durable and have a long service life, but malfunctions and breakdowns are still possible. Users often encounter the problem that their iPod won't turn on and want to know how to fix the problem themselves without spending money on a repair at a service center.

The player shows no signs of life

It happens that an iPod that previously worked without interruption stops turning on. This can happen for no apparent reason or due to the user's fault, for example, if the device was dropped, hit, or stored in inappropriate conditions. Then, when you press the power button or any other button, the screen will remain dark and there will be no reaction from the gadget.

No iPod is immune to this, be it Touch, Shuffle, Nano or Classic. In this case, it is important to find out why the player does not turn on and apply all possible methods to resolve the problem yourself.

Causes and solutions

1. The most common reason that a gadget does not turn on is low battery. This could happen even when the player has not been used for a while. To make the player work, connect the device to a power source and wait a few minutes. The Apple logo will appear on the screen and the gadget will turn on. When charging via a low-speed USB port, the player will start working within 30 minutes after connection. If the player does not turn on after this, make sure the cable is connected correctly or try a different charger.
2. Does not work power button. If, when connected to a charger, the battery indicator flashes on the screen, but the player does not turn on, then the problem lies in the power key. This minor problem can be corrected at a service center.
3. On iPod moisture got in. Penetration of liquid into the device will damage the circuits and contacts, and then the player will neither turn on nor charge. In this case, only a specialist can fix the breakdown. The chance that after repair the gadget will turn on and work as before depends on the severity of the damage.
4. Impact or fall of the gadget. As a result of such a mechanical impact, the contacts or cable could break, which can only be repaired by a professional. Damaged parts may need to be replaced in order for the player to turn on.
5. Locking enabled. You can block all buttons, including power buttons, with a switch located at the top or bottom of the case. The lock is activated if an orange dot or stripe appears next to the switch. By moving it so that the point is hidden, you can remove the lock, thereby returning all the keys of the gadget to their functions.

Sometimes an iPod that shows no signs of life will turn on after a factory reset or force restart. With it, you can disable active applications and programs. This does not mean losing files on the player, but it can return some settings to factory settings. How to reset on different models is described below. When the device turns on, you should immediately update the iPod software.

Force restart iPod

Sometimes, in order for the device to turn on again, it is enough to force it to restart. In different models of Apple devices, this can be achieved by pressing different key combinations. To reset your iPod, press and hold the following buttons simultaneously.

1. Force restart iPod Classic

Press the "Menu" and "Select" keys simultaneously for 8 seconds. The lock switch should be in a position where the orange stripe is completely hidden.

2. Force restart iPod Shuffle

The restart is carried out in a state disconnected from the network and the computer by pressing the power button. The green indicator should go out. After 10 seconds the player should start turning on.

3. Force restart iPod Nano

If the iPod Nano does not turn on, the method of forcing a restart will depend on the generation of the gadget:

1. To reset a 7th generation device, you must hold down the “Sleep/Wake” and “Home” key combination.
2. Nano 6th generation restarts using the Volume Down and "Sleep/Wake" buttons.
3. If the device is generation 5 or earlier, you need to press the “Menu” and “Select” keys when the lock is off.

4. Force restart iPod Touch

You can restart the player of this model by simultaneously pressing the "Home" and "Sleep/Wake" buttons. Hold them down for 10 seconds or until the Apple logo appears.

5. Force restart iPod Mini

If the iPod Mini or players with a dock connector and touch wheel do not turn on, force a reboot as follows:

• iPod Mini - a combination of the "Menu" and central buttons;
• iPods with a scroll wheel, touch wheel and dock connector - Play/Pause and Menu buttons.

All actions must be performed with the key lock turned off (the switch must hide the orange mark). If after the first attempt the gadget does not turn on, you should repeat the action again.

• Note. Because the restore process deletes all the songs and files that were saved on the drive, you must back up all the information on the iPod drive. All songs, podcasts, and audiobooks can be downloaded back to iPod as long as they are saved in your iTunes library.

• 6. A progress bar will appear on the computer screen, indicating that the first stage of the recovery procedure has begun. Once this step is complete, iTunes will ask you to leave your iPod connected to your computer to complete the restore process.
• 7. When the second stage of the recovery procedure is completed, the Apple logo will appear on the iPod screen, as well as a progress bar (at the bottom of the screen). It is very important that the device remains connected to the computer or to a power source until this step is completed. Note. The progress bar may be difficult to see because the iPod's display backlight may turn off while this step is in progress.
• 8. Upon completion of the second stage of the recovery procedure, when you connect your iPod to your computer, the “iTunes Installation Assistant” window will appear on the screen, which will ask for the name of your iPod, and will also ask you to select synchronization settings, as when you first connected your iPod to the computer.
• If the recovery was unsuccessful, follow the link.

• 1. Make sure you are using the latest version of iTunes.
• 2. Open iTunes, and then connect your iPod to your computer.
• 3. After a while, the device will appear in the source list of the iTunes application.
• 4. Select your iPod in the source list to view information about that device, which appears in the Settings tab in the main iTunes window.
• 5. Click the "Restore" button. You'll be prompted to configure one or more restore settings, and iTunes may begin automatically downloading updated software for your iPod. The following are 4 possible parameters for the recovery function.
• Option 1: "Restore". In this case, the application restores the version of the software that was already installed on the iPod.
• Option 2: "Use old version." In this case, the application restores the version of the software that was already installed on the iPod, despite the presence of updates.
• Option 3: "Use latest version." In this case, the application restores the latest version of the iPod software.
• Option 4: "Restore and Update". In this case, the application restores the latest version of the iPod software.
• 6. After selecting a mode, you will be prompted to enter your administrator name and password.
• 7. A progress bar will appear on the computer screen, indicating that the first stage of the recovery procedure has begun. Once this step is complete, iTunes will ask you to leave your iPod connected to your computer to complete the restore process.
• 8. When the second stage of the recovery procedure is completed, the Apple logo will appear on the iPod screen, as well as a progress bar (at the bottom of the screen). It is very important that the device remains connected to the computer or to a power source until this step is completed. Note. The progress bar may be difficult to see because the iPod's display backlight may turn off while this step is in progress.
• 9. Upon completion of the second stage of the recovery procedure, when you connect your iPod to your computer, the “iTunes Installation Assistant” window will appear on the screen, which will ask for the name of your iPod, and will also ask you to select synchronization settings, as when you first connected your iPod to the computer.
• If the recovery was unsuccessful, follow the link

Apple products are known for their good quality, but even the most reliable equipment periodically breaks down - for example, any owner can suddenly discover that the computer is not recognized or the iPod does not turn on. If your player (iPod Nano or iPod Touch) stops working, you do not have to immediately take the device to a service center. For simple breakdowns, you can carry out repairs yourself.

Why did the device stop working?

If your player does not turn on, do not rush to get upset. The iPod may have stopped working for reasons that are fairly easy to fix on your own:

• The iPod died and turned off. If your iPod won't turn on for this reason, it will start booting as soon as you can connect your iPod to a power source. If there is not enough charge, the device may turn off immediately - you need to wait a while
• blocking enabled. If your iPod stops turning on, but charges when connected to a power source, the problem may be that the iPod lock mode is turned on. Check the position of the lock slider on the top or bottom of the device
• iPod won't charge or turn on without charging. Check the integrity of the charger. Make sure that the iPod charging model matches your iPod - third-party devices often do not work correctly. In this situation, you need to connect the iPod charger recommended by the manufacturer
• iPod software problems. It may not turn on due to software glitches. In this case, you need to reset the settings. All files will remain in place.

Different iPod models reset differently. The following methods may suit you:

• Hold the sleep button for about 10 seconds
• Press the sleep button and the mute button at the same time
• press the sleep and home buttons

If your player is completely discharged and stops booting, you need to connect the iPod to a power source and wait about half an hour. After this it will load correctly again.

More ways to troubleshoot iPod problems

If all of the above causes of problems have been eliminated, but your iPod still does not turn on, you need to leave it for several days so that the device is completely discharged and turns off. Then you need to connect it to the computer, charge it and repeat the necessary steps again to reset the settings.

Another recovery method that may be suitable if your iPod stops turning on is to update the software. Connect your iPod to your computer, format it, and then download the new version of the software. Don't forget to back up your files on your iPod.

Professional iPod repair

In some cases, if your iPod Touch, iPod Nano, or other player stops functioning, the problem may be serious. You will need the help of a specialist if your iPod does not turn on for the following reasons:

• The iPod power button is broken. To make sure that the problem is in the power button, just connect the iPod to a power source and see if the device is charging. If a charging indicator appears on the screen, the lock is turned off, but when you press the button the player still does not turn on, this is the problem
• Water got into the iPod. In this case, the device does not work and does not charge due to damaged microcircuits and contacts
• the device fell, resulting in damage to the screen, cable, contacts and other internal parts

If for any of these reasons your iPod stops turning on, you should contact a professional. You can easily find such specialists on the Yudu website. Order their services if the device does not work properly. Experienced technicians will diagnose and determine why the iPod won’t turn on.

Specialists work on modern special equipment and use original spare parts. Our technicians will help you if your Apple device stops functioning correctly:

• the player does not turn on
• iPod won't charge
• the equipment is not recognized without charging, etc.

Leave a request on this page when the iPod does not turn on and simple methods of restoring the device do not help - experienced specialists will do it in the shortest possible time.

Apple products have long been famous around the world for their gadgets, which are distinguished by their high reliability and quality of work.

But with iPod gadgets, like with any other modern devices, even from this manufacturer, certain breakdowns sometimes occur. One of the most common problems is when the iPod Nano of any generation does not turn on.

In most cases, such a problem can be solved independently, without resorting to the help of qualified service center employees.

Several reasons and methods for eliminating them

There are many reasons why the player may not start.

The most common of them are:

• The iPod 5 or other gadget model is dead, and as a result it won’t turn on. Fixing this problem is very simple - put the device on charge.
• The power button is broken. This is very easy to check - if, when you connect the charger, a charging indicator appears on the screen, but the button that starts the gadget still does not respond to pressing, repair will be required. This can be done by specialists in specialized service centers;
• Moisture has entered the gadget, which can damage the microcircuits and contacts. As a result, the gadget does not turn on and does not charge. There is only one way out - take the player to a service center, since you can’t do anything on your own;
• if the gadget was dropped, this could lead to a break in the cable, contacts or other elements. In this case, as in the previous one, professional repairs will be required.

Turn off the lock switch

Another fairly common reason why a gadget may not turn on is that the lock switch is turned on.

This switch is located on the bottom or top of iPod Shuffle or another model or generation of Apple device.

When it is in the “on” position, an orange stripe appears next to it. In this case, not a single button on the gadget’s body will work, and the power button is no exception.

To disable the lock, the switch must be moved so that the orange strip is completely hidden. After this, you can try to turn on the player again.

Check that the battery is charged

Also, the reason that the iPod Nano 6, like other models, does not turn on is a discharged battery.

To check this, you should pay attention to the screen when you try to turn on the device: when the battery is low, a screen appears on it for 3 seconds, indicating the need to charge.

To charge the gadget, you need to connect it to:

It's worth noting that Shuffle 4 and other generations only require a high-power USB port to charge. iPod nano and 5th generation iPods can charge via FireWire or USB.

In addition, you need to remember that if you charge a completely discharged battery via the USB port, the delay before turning it on can be up to half an hour.

Therefore, if you use this type of charging, you can try to turn on the player no earlier than after 30 minutes.

Reset settings

If after all the above, the player still does not work, you should try resetting its settings. No need to worry: all user files are saved.

But some parameters may be lost, but returning them will not be difficult.

iPod nano (7th generation)

To reset settings on iPod Nano 7, you need to follow these instructions:

If this does not help, you can resort to your last chance - restoring factory settings. It should be remembered that this will delete all user files, but it is quite possible that such a procedure will eliminate all problems.

If this does not help, there is only one thing left to do - seek help from a service center, where they will definitely restore the Nano 7.

iPod nano (6th generation)

1. To reset the settings of such a sixth-generation gadget, you need to do the following:
2. It happens that such actions do not produce any results. In this case, everything will need to be repeated, having first connected the player to the network or computer;
3. If the backlight does not even turn on, it is quite possible that the battery is low. To eliminate this possibility, you should leave the player connected to the computer for about 30 minutes, and then repeat all the above steps.

If this does not help, all that remains is to restore all default settings or immediately take the Nano 6 to a service center, where the cause of the problem will be accurately restored.

iPod with click wheel

If the 1st-5th generation iPod, the main feature of which is the control wheel, does not turn on, then to reset its settings you need to do the following:

Otherwise, the device will need a complete restoration of parameters from the manufacturer or professional help from a service center.

iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

To reset an iPod with a touch wheel, scroll wheel, or dock connector, you'll need to do the following:

iPod shuffle

To reset your iPod Shuffle, you need to do this:

iPod touch

Touch 5 does not respond and does not turn on – what should I do? You can try a forced reboot, which will also reset the device settings.

To do this you should:

Do a battery drain

Sometimes the player may be in a state where resetting the settings does not give any effect. Why is that? This is due to the characteristics of the device. In this case, you will need to completely discharge the battery first.

So, if the player does not turn on after a reset, you need to do the following:

• disconnect the player from all power sources for a day;
• connect it to the power adapter or computer, repeating all reset procedures again.

Video: Power button does not work

Update your software

If you managed to turn on the player after resetting the settings, it is recommended to immediately install a new version of the software on it: after the update, it will begin to function normally.

Windows Update

To update the player from a computer running Windows OS, you need to do the following:

From a Macintosh computer

When updating iPod software from a Macintosh computer, follow these steps:

1. connect it to the PC with a USB cable and launch the proprietary iTunes application;
2. Before starting the update, the player must be formatted from a Macintosh PC, otherwise it will not be possible to install the new version of the software;
3. iTunes will automatically detect a new version of the software online and prompt the user to download it. If updates have already been downloaded, they will be prompted to install them;
4. depending on the method of connecting the player to the computer and its model, you may need to connect the device to the power adapter or leave it connected to the PC;
5. After this, a progress bar will appear on the iPod screen along with the Apple logo. When the indicator reaches 100%, the player is ready for use.

Thus, if a popular iPod player of any generation has stopped working or has stopped turning on for no apparent reason, this is not a reason to panic.

There are many ways to try to bring it back to life on your own, most of which are described above.

If, even after trying all of them, nothing works, and the player still does not turn on, there is still a way out - you can always contact a service center for help.

Employees of such services will always tell you what kind of repairs the gadget will need so that its owner can enjoy using it as before.

Your iPod won't charge and you can't figure out why? Then this article is addressed to you. If your iPod is not charging, it is advisable to immediately stop trying to charge it. Also, do not try to turn on your iPod MP3 player repeatedly. In these attempts, you may be seriously making the situation worse.

For example, if moisture gets into the player, then when turned on and when charging, an electrochemical effect will occur, as a result of which your player will fail even more. As a result, repairs will cost you much more and take more time.

In such cases (when charging does not occur), diagnostics are always necessary. It will help you find out why your iPod Touch 5, 4, Nano 7, 6, Classic, Shuffle is not charging. Our diagnostics are completely free.

Why the iPod won't charge, here are some of the most common reasons

1. The connector is faulty. Mechanical impacts of various kinds (falling the player, failure to follow operating instructions, incorrectly connecting the charger...) can render the connector unusable. At the same time, it is impossible to repair it at home without special equipment, so the connector needs to be replaced in a specialized workshop.

2. Voltage surges or moisture ingress. If moisture got inside the case or there was a voltage surge, and as a result the iPod stopped charging, then this behavior could be caused by a failed power controller or the lower cable. Our technicians will be able to accurately identify the faulty part and offer the best way to restore the functionality of iPod Touch 5, 4 (4g, 3g). Perhaps this will be cleaning from corrosion, replacing or repairing faulty parts.

3. Also, problems may arise from moisture or mechanical shock when the iPod is not charging from the computer. The reason for this may be the following problems: damaged power supply, printed circuit board tracks, etc. To accurately determine the breakdown, it is necessary to carry out diagnostics at a service center.

4. Damage to the charging device. When your new iPod won't charge from the mains, the charger may be faulty. Here we can advise the following: before you start worrying about the breakdown of your iPod Touch, check it with a different charger. You may be pleasantly surprised to find that your iPod begins to charge. In this case, you can just buy a new charger.

5. iPod does not charge from USB. If you have not used your player for a long time, the battery may be deeply discharged. When turned off, it uses a small amount of power, but over time it will use up all the charge, which can cause the iPod to take too long to charge or fail to charge via USB. To prevent this from happening, you need to periodically charge the player. It’s a different matter when the iPod does not see USB, there may be a problem with both the player and the computer. In any case, diagnostics will not hurt.

It is very difficult to fix the problem yourself:

This is possible only in some cases (the charger is broken, etc.), and is often dangerous, since you cannot be 100% sure of the causes of the breakdown.

Contact us! After a detailed free diagnostic, we will return your player to its previous working condition. You can also contact us when your iPod Touch 4 (4g, 3g) does not charge completely, does not see USB, or other problems not mentioned above arise. Please know that we sell spare parts all over Russia and because of this, in our workshop we only have original spare parts for the Nano 7, 6, Classic, Shuffle, Video models, and all of them at the lowest prices. It’s also good news that with any repair we will give you a guarantee for the entire device.

A young man approached us. His problem was the inability to charge the player. After diagnostics, it turned out that there was a problem with moisture ingress. Diagnostics and recovery cost him 900 rubles. If he had called later, repairing the iPod would have cost much more.