Menu
homeFiles and folders

An asus error occurred in the system interface application. “An error occurred in the system graphical interface” application, how to fix it in Android

Today we will deal with the GUI error on Android. Everything is quite primitive and simple. First, let's understand what a graphical interface is. Essentially, this is a kind of shell of the Android operating system. For example, inside the body there are organs that are covered with a membrane (skin, etc.). It’s the same here, although it’s difficult to find the correct comparison, since the shell acts not only as a kind of external covering, but also as a bridge between the code and the user’s understanding. Thanks to the shell, you do not need to write the code each time; you simply click on the desired icon to perform the desired action.

What is the reason?

GUI Error, often caused by a software glitch. For example, you installed some application that interferes with the operation of the standard launcher or shell in general. It may also be that after flashing such a problem appears due to the fact that you did not do all the wipes (full cleaning) and there are tails left from the previous ROM.
As a result, we have the following situations:


  • GUI error after flashing

  • Error graph. interface due to the launcher or other third-party software

How to fix

The easiest and most effective way to fix the GUI problem is to perform a factory reset. According to the theory, this is the only method if the error appeared after flashing and the last resort if the error appeared after installing the launcher or other third-party software.
If these methods do not help, then you can try to reflash your smartphones, perhaps the issue is in the firmware. In extreme cases, the problem lies in the hardware, then you need to take the device to a service center.

The system graphical interface has encountered an error Android, what should I do? This can happen to any device running the Android operating system. You launch any application, the message immediately appears "An error occurred in the system GUI application" or the error is cyclical, that is, it appears constantly, immediately after closing.

Causes

Probably everyone understands what a graphical interface application is and what its essence is. Just in case, let’s clarify that this is the shell through which we control smartphones/tablets. All these beautiful buttons, menu items, etc., by tapping on which, we perform various tasks using our gadgets - this is the graphical interface.

An error may occur in the following cases:

  • You installed an application that conflicts with the OS, as a result of which the interface application has stopped.
  • The launcher does not work correctly. There may be an error in the launcher application, for example, it was damaged by viruses. Then you should delete it, if it is a third-party launcher, install it again.
  • It is possible that your device is defective, that is, nothing can be fixed using software.
  • Crooked firmware. Often, Chinese gadgets initially have bad firmware, you go to the 4pda forum and find a custom one there, which is much better than the factory one. But they may also contain errors, or you may have flashed the device incorrectly.

Fixing the error

It’s clear why this error appears, now you need to decide how to eliminate it. First, remember, perhaps it arose precisely after you installed some application. Then you should simply uninstall it, reboot your tablet/smartphone on Android Lollipop and check whether the problem is gone or not.

By the way, the Beeline store has a lucrative offer related to a good smartphone - Meizu M5c.

Memory card

Sometimes, the error was resolved by removing the memory card from the device. To do this, you should turn off the device, remove the card, turn it on and check whether the error remains or not.

Restoring default settings

If the previous options did not help, then all that remains is to return the device settings to those that were set at the factory. All data stored in the internal memory of the smartphone/tablet (not on the memory card) will be deleted. To do this you need:

Reset settings via Recovery


If you can’t use the Android interface at all due to a pop-up error, the only way out is to go to Recovery Mod and do a reset through it. How to enable this mod? Turn off the device, then hold down the Volume + button and the Power button.

Please note that on some devices, entering this menu is different.

When the menu opens, select "Wipe data/Factory reset". Control is done using the volume buttons + (select) and – (confirmation).

Flashing


If things are really bad and nothing can be done, then the only option is reflashing. Use stock firmware, that is, factory firmware. Instructions on how to do this can be found on the official website of the device manufacturer (not always) or on the 4pda forum.

Repair

You spent a lot of time, but nothing worked, is the error still appearing? It’s better to go to a repair shop, where professionals will determine exactly what’s wrong and help fix the problem.

Before you start updating your operating system, make sure your device is fully charged. It is important to exclude the possibility of shutdown. You can connect the gadget to the charger during the procedure. If your tablet or smartphone turns off during a firmware update, system and data loss will occur.
Check the version of the Android operating system that is current for your device, and also find out what firmware is currently installed. You can clarify this information in the device settings in the “About phone” section. Pay attention to the Android version, kernel version and build number.
Now, based on this data, you need to find and download new firmware that will fully match your smartphone or tablet computer model.
HOW TO FLASH ANDROID USING A COMPUTER
It should be said that there are several ways to flash Android and in this article we will look at the most common ones. Let's start with flashing the gadget's firmware using a special program that is pre-installed on the computer. There are many applications that allow you to install a new version of the OS on your device, but we decided to focus on the Fastboot program, since it is safe, convenient and reliable, and is also best suited for the model that we will be flashing as an example. So, let's figure out how to reflash Android using Fastboot.
Note: the program for flashing Android should be selected based on the device from which manufacturer you are using. We recommend that you familiarize yourself with the following program list
First of all, you need to download this application. There will be no problems with searching for Fastboot; you just need to know how to use search engines, and everyone can do this today. Download the program and unpack it to the root of drive C so that the path to the file looks like this: C:\Android.
The “Tools” folder contains the necessary utilities, and the “Driver” directory contains drivers. Now you need to connect the device that you plan to reflash to the computer and install the driver. As a rule, the device automatically finds the necessary drivers, but sometimes this does not happen. In this case, you need to open the website of the manufacturer of your smartphone or tablet and download the software. Please ensure that the firmware you plan to download is suitable for your gadget model. The firmware must be downloaded in .zip format and placed in the Tools folder, which is located here: C:\Android.
Before flashing Android, you need to unlock the bootloader on your device. The bootloader unlocking process will differ depending on the specific gadget model. Open the Start menu on your computer, enter “cmd” in the search bar and select the cmd.exe program.
In the Command Prompt window, type cd C:\Android\Tools. Confirm the command by pressing the Enter key, after which you will find yourself in the “Tools” directory.
Now you need to enter the following command: fastboot devices.
If you were given a device code, then fastboot has identified your smartphone or tablet and you can start flashing the Android. If the message “waiting for device” appears in the window, you need to turn off the gadget and install the drivers. Now you need to enter the command for flashing: fastboot update firmware_file_name.zip After this, flashing will begin. Don't forget to restart your device after the operating system update is complete.
HOW TO FLASH ANDROID VIA RECOVERY
Another way to reflash Android is to use standard recovery or custom recovery (TWRP\CWM). We will explain what custom recovery is in more detail below. In short, these are unofficial firmwares. So, find the firmware that suits you on the Internet, download it and save it to the root of the file system of your device.
Reboot your device into recovery mode. Login process

They are characterized by stability and safety. But, despite the fact that it runs on a reliable Linux operating system, from time to time various glitches occur in it.

On many forums, users write that an error has occurred in the Android application, as a result of which it does not start or crashes. In this article we will look at the reasons why these problems arise, as well as ways to solve them.

Reasons for failures in mobile applications

Most often, problems with launching mobile applications arise due to problems with the hardware and software components of the phone and with the application itself. As soon as an error message appears on the display, the first thing you need to do is restart your phone or tablet. Most one-time failures can be resolved this way.

Another effective solution is to clear your memory. Some “heavy” programs, like Youtube or VKontakte, are very sensitive to the lack of free space on the device. If necessary, you should delete unnecessary files from the memory card. You should also go to the Google Play Store service, where you can find information about the latest application updates.

How to troubleshoot problems with mobile apps

What to do in cases where an error occurs in the Android application, and restarting the smartphone and clearing the memory does not help? There are three ways to fix this problem:

  • data cleaning,
  • reinstalling software,
  • reset to factory settings.

You can delete temporary data and cache through the system settings in the “Applications” section. The further algorithm of actions is as follows:

  • click on the “All” tab;
  • select the desired application from the list;
  • if it is running, click on the “Stop” button;
  • select “Clear cache”;
  • then select “Erase data”;
  • reboot the device.

This is one of the most effective ways to fix this problem, especially when the error is related to the operation of games. If it doesn't help, you should try reinstalling the application. To do this, you need to open the Play Store service, select the desired program and delete it. After this, you need to restart your smartphone and download the desired application again.

It should be remembered that this method involves removing the previous version of the software, which is why conflicts may arise in its operation again.

Fixing an application malfunction by restoring factory settings

The most radical solution to the problem associated with errors in applications on Android is to reset to factory settings. You should resort to it only when the methods described above do not help, and also when problems arise in the operation of services such as Play Market, process.media and com.google.process.gapps.

After an error message appears on the screen, you have rebooted and reinstalled the software, you need to use Factory Reset mode. To do this you should:

  • go to your smartphone settings,
  • go to the “Restore and reset” section,
  • select “Reset settings”,
  • check the box “Clear memory”;
  • reset your phone;
  • Click on the “Erase everything” button.

This algorithm of actions will help correct all errors not only in the operation of applications, but also in the Android operating system itself. Before performing the operation, it is recommended to delete your Google account, transfer the necessary files from your Fly smartphone to another device, and charge your phone. This will help restore all applications and save important data.

Many users of Chinese-made Android often experience various types of errors. One of the most common is “An error occurred in the Settings application.” This failure is not entirely standard, as in some cases it can block access to the device settings menu. Let's figure out how to fix this problem.

Reasons for failure

Most often, the problem appears on smartphones and tablets that still have outdated OSs frozen somewhere in versions 4.2.2, 4.4.2, 4.4.4. Versions 5.1 (and higher) and 6.0 (and higher) are more stable in this regard. As such, there can be many reasons for the bug. The application is installed crookedly, contains broken files and crashes. A global bug in the firmware, due to which you will not be able to launch system processes and programs (camera, battery, calendar, phone book, etc.). We should also talk about virus activity on Android and the presence of garbage (residual files) in it.

Error in the Settings app on Android

Depending on the device model and operating system version, the message may differ. For example, on Samsung and Sony it displays the message “Settings application has stopped”, and Chinese models may display “Unfortunately, Settings has stopped”.

Fixing Settings glitch in Android

In any case, to solve the bug, you need to perform a series of cleanups and reset some services on the system. Select from the list of tips the situation that best suits you. To begin with, you need to take simple steps, sort of half measures.

Before all actions, I recommend checking your device for viruses, use current versions of antiviruses (Dr.Web, AVG, Kaspersky, ESET, etc.). Also use the system cleaning tool - cache and junk files. In new versions of the OS, there is a built-in option for cleaning, or you can download special software - Master Cleaner, for example.


Conclusion

These steps should help resolve the error with the Settings app. As a last resort, if it is not possible to fix the bug at all, then you will need flash the device. Perhaps you are faced with broken firmware that will constantly crash and need to be replaced. If there are nuances in your case, write about them in the comments, we will try to help.

Popular pages

Recently, many users of Apple products have encountered a request to connect to iTunes appear frozen on the screen, and the message support.apple.com/iPhone/restore also appears at the top. This moment is also called “Endless Recovery Mode”, because...

HTC One A9 - the company's attempt to return

In Google Nexus 6P the bootloader cannot be unlocked without