In what position is it best to transport the washing machine? How to transport washing machines

After purchasing a washing machine at a hardware store, transporting it home is easy - the unit is carefully packaged and protected from external influences. If you decide to buy a used car or are planning to move to another city, organizing safe transportation will be more difficult.

In this article we will talk about how to properly organize the transportation of a washing machine.

Preparatory work

Preparing equipment for moving is no less important than transportation itself. If you skip this step, it may lead to damage to parts of the unit on the road. In order not to forget anything, we suggest preparing according to the following plan:

Disconnect the unit from electricity by unplugging the power cord, then disconnect the unit from the water supply and sewer system. If you move in a hurry, you may forget to perform these simple steps and damage important parts of the device.
Drain any remaining water from the connecting hoses, pipes, drum and drain pump. After this, leave the hatch and filter plug open for a while to allow them to dry inside. If you do not carry out this procedure, during transportation the liquid may get on parts of the washing machine (for example, on the control panel) or wet nearby items.
Secure the external elements in a stationary position - wires, hoses, pipes, etc. Strong plastic clamps are suitable for this purpose.
Cover sharp corners and moving parts with tape - the hatch door and the powder compartment. This will protect parts from damage and protect the person who will carry the equipment from injury.

When the first preparation steps are completed, begin fixing the drum. Even when shaking on the road, it must remain motionless. For reliable fastening, transportation bolts are best suited - 4 elongated fasteners that come with the machine and secure the tank when transporting the washing machine. They need to be screwed into special holes on the back wall. If you don’t have any at hand, the question arises: how to transport a washing machine without transport bolts? To do this, take a screwdriver and unscrew the top panel cover. Place any softener, such as pieces of foam rubber or polystyrene, between the tank and the walls, then return the panel to its place and tighten the bolts.

Before transporting the washing machine, it must be packed. If you do not have the original packaging, replace it with improvised materials. You can wrap the body of the unit with fabric and secure it in a circle with a thick rope - these materials can be found in every home. It is not recommended to transport the product completely without packaging. If you follow the preparation rules, you will be able to deliver your household appliance to its destination intact and undamaged.

Transporting the washing machine

How to transport a washing machine so that it is not damaged in transport? A properly packaged unit is completely ready for manual carrying and loading into a car. The best vehicle option is a truck with a spacious body, but you can transport the product in a passenger car. When carrying, try to keep the appliance in an upright position, even if you are lowering it from the upper floors. It is impossible to cope with such a task alone; at least two people must carry the washing machine. Professional movers use special lifting belts for carrying, with which the weight of the machine is practically not felt, and the risk of damaging or dropping an item is minimized.

Next, you need to decide exactly how the equipment will be installed in the car. If you cannot transport the machine horizontally, is it possible to transport the washing machine lying down? Subject to certain rules - yes. For transportation, it is recommended to choose one of three positions: lying on the side or rear wall or in the normal standing position for the unit. Let's consider the proposed options in more detail:

standing position is considered the most successful for the machine, but is used only when the tank is securely fixed. The equipment must be installed sideways in the direction of travel. It is advisable to fix the machine between two massive objects, such as pieces of furniture. If this is not possible, it is recommended to secure the unit in the body using special belts. In this position, ideal preservation of parts is achieved;
side position, according to experts, does not require necessarily fixing the drum in one position, but it is still better to play it safe and fix it. Pay attention to the powder compartment - it is important that there is no water in it, which can flood the electronic board and ruin it;
position on the back wall acceptable for all brands of units except Zanussi models. If you transport a machine of this brand by placing it on the back panel, you can damage the fill valve.

To transport the unit safely, ensure that it is completely stationary in the vehicle.

It is not recommended to transport the washing machine lying on the front wall or upside down. In the first case, the manhole cover and the drum cuff may not be able to withstand the load. Installing the machine in the body with the top panel down is permitted in a situation where the engine is removed from the structure.

To ensure that the device remains intact after a trip, you should drive the car carefully. It is important to travel on smooth roads at a moderate speed, avoiding sharp turns and braking. If you follow all the recommendations given, the transportation of the washing machine will be successful.

Video

From the following video you will find out whether it is possible to transport a washing machine on its side, and also familiarize yourself with the rules for carrying and transporting the unit.

She graduated from the Institute of Tourism of the Federal Pedagogical University with a degree in Management, loves to travel and communicate with people. She is interested in psychology, enjoys dancing, and studies English. During the five years of maternity leave, I thoroughly mastered housekeeping, not forgetting about my own development. He skillfully uses words and can support a conversation on any topic thanks to his interest in different areas of life.

Found a mistake? Select it and click the buttons:

Ctrl + Enter

4.8571428571429 Rating 4.9 (14 votes)

Interesting!

For washing small items on the road or in a hotel, it is convenient to use a regular plastic bag. Socks or tights are kneaded inside a tied bag along with water and a small amount of detergent. This method allows you to pre-soak things and wash them without damaging the fabric or wasting a lot of powder and water.

History knows the fact that a kitten fell into the drum of a washing machine and, after going through a full wash cycle on the “Wool” program, got out of the unit unharmed. The only trouble for the pet was an allergy to washing powder.

In the 19th century, washing ladies' toilets took a lot of time. The dresses were first ripped open, and then each part was washed and dried separately so that the fabric did not become deformed. After washing, the clothes were sewn again.

There are a variety of balls that are used in the washing machine. Antistatic ones will prevent the fabric from sticking to the body after washing, balls with special loops will “comb” the lint and prevent the appearance of pills, and silicone ones with pimples will prevent fluff from matting when washing outerwear.

Washing machines have something to do with the origin of the expression “money laundering.” In the 1930s, American gangsters used a network of laundries as a cover for their illegal activities. By passing off the proceeds of crime as proceeds from cleaning clothes, they turned “dirty” money into “clean” money.

Astronauts, while in Earth orbit, solve the problem of dirty things using an original method. Clothes are dropped from the spacecraft and burn up in the upper atmosphere.

There is a washing machine “for bachelors”. Linen washed in such a unit does not need to be ironed at all! The thing is that the device does not have a drum: some things can be placed inside the container directly on hangers (for example, jackets and shirts), and smaller things (for example, underwear and socks) can be placed on special shelves.

The first officially patented washing machine was made of wood and was a box with a frame, half filled with wooden balls. Laundry for washing and detergent were loaded inside and the frame was moved using a lever, which, in turn, made the balls move and grind the laundry.

Washing machines equipped with the “No Iron” or “Easy Iron” functions can wash clothes with little to no wrinkling. This effect is achieved through a special approach to spinning - it is performed at low speeds, with long pauses, and a small amount of water is retained in the tank.

When moving house or purchasing new household appliances, the question always arises of how to ensure the safety of the devices. To avoid damage, the washing machine is transported only in special packaging and in a special position.

What are shipping bolts used for?

On the back wall of the washing machine you can see special holes intended for transportation bolts.

The mechanism of the machine is designed in such a way that there are many parts inside that are movable, in particular the tank and drum.

To ensure uninterrupted operation of the device, everything is secured with shock absorber springs.

During transportation, the drum dangles inside the shell of the machine. To do this, it is fixed with special bolts. (you can read the article on how to find and unscrew them in a washing machine).

Can it be transported without bolts?

When purchasing used appliances, there may be no bolts or they may be lost.

In this case, you need to remove the top wall of the washing machine and fill the free space with soft materials.

Can be used:

rags;
Styrofoam;
foam rubber

Then the upper wall is put in place and secured with fasteners. Even during rough transportation, the drum and tank themselves will not be subject to impacts and damage the internal walls.

The outer casing of the equipment is also packaged in:

corrugated cardboard;
stretch film;
textile.

Experienced experts recommend transporting the washing machine in an upright position, while securing the drum and tank.

When transported in a truck, the automatic machine is installed sideways in the direction of travel.

If other large items are transported in the back, the car must be placed between them so that it does not move, jump, or fall. This eliminates the risk of damaging shock absorbers, contacts and pipes.

Once the machine is packaged and ready for transportation, it must be carried safely to the vehicle, which can also cause problems. The hardest thing is to lower the unit from the upper floors without an elevator.

When descending from a floor, it is advisable to keep equipment in an upright position, in the same position as it will be used.

If this is not possible, then bend backwards.

If the packaging is insufficient, there is a risk that the doors will open during transportation. Although they are closed and held in place using special fasteners, it would be a good idea to secure them with tape or rope.

The empty drain hose is wound up and secured with tape or ties. Additionally, you can wrap them in polyethylene or soft material.

Loading into the car

It is easiest to load a car into a truck; questions usually arise with a passenger car.

There are several positions in which equipment can be transported:

standing;
on the side;
on the back wall.

If the machine will be transported on its side, then the drum and tank may not be secured. Not all experts share this opinion, so it would not be superfluous to lay foam rubber between the mechanisms.

A used machine must be completely dry if it is planned to be transported on its side. Liquid may remain in the powder container. Getting the car body wet isn't as scary as damaging the electronics.

If you are not sure that the container is dry, it is better to wipe it dry or remove it and transport it separately.

Please note: if the washing machine is transported lying down, the powder container should not point upward (you need to focus on the model of the unit).

All brands of household appliances, except Zanussi, can be transported on the rear wall.

The manufacturer Zanussi differs in that it makes the fill valve near the counterweight. If you put the machine in an unnatural position, the valve breaks.

Before transporting the machine, you can place it on the back wall for a while to allow excess water to drain through the drain hose. Of course, the driver should drive as gently as possible and not stop or turn abruptly.

Possible consequences

Before you decide in what position to transport the machine, you need to know the consequences of improper operation. If the machine undergoes improper transportation, there is a risk that it will not work in the future.

When a move is imminent, the rules for transporting household appliances are often violated. As a result, after moving, she may refuse to work.

We will tell you how to prepare a washing machine for transportation and whether it is possible to transport the washing machine lying down, on its side or upside down. Find valuable recommendations and useful tips below.

Almost everyone knows: before transporting a washing machine, you need to pack it. It’s great if the original packaging has been preserved - then the car is carefully placed in a box, sealing the walls with polystyrene foam or sheets of foam rubber.

But when 3, 5, 7, or even 10 years pass from the date of purchase of the car, it is unlikely that the packaging will survive until that glorious moment - your move. Therefore, transporting a washing machine and the correctness of this process depends on your ability to improvise.

Before transporting the washing machine in a car, you should take the following measures:

Drum fixation

Next, we’ll look at how to secure the washing machine drum during transportation. The ideal option provided by washing machine manufacturers is fixation with transport bolts. If you have them, take them out and screw them into the special holes located on the back panel of the CM.

Fixing the drum with improvised means

Another question is how to transport a washing machine without shipping bolts.

If they have not been preserved, you cannot leave everything as is. Unscrew the back panel of the machine and insert into the space between the tank and the wall anything that is suitable to soften the vibrations - polystyrene foam, foam rubber, soft rags.

Attach the panel in place.

Package

An equally important question is how to pack a washing machine when moving if the packaging has not been preserved. The body also needs protection, and we will tell you what can be done. Simply wrap the body with the material you have on hand:

Then tie the body with rope to securely secure the makeshift package. Since non-factory packaging is not very reliable, be careful when driving the car.

Important! If you are wondering how to transport a washing machine to another city, don’t worry - if you follow all the instructions correctly and drive carefully, the machine can travel hundreds of kilometers without any damage to it.

Transporting the washing machine

Now you know how to pack a washing machine to transport it in a car or truck. The next stage is the transportation itself, which is preceded by transportation and loading.

Important! Think it's okay to turn your washing machine upside down while you're taking it down from your floor? In no case! If carrying is uncomfortable, maintain only a slight backward tilt, but do not invert the SMA.

Next, we decide whether it is possible to place the washing machine on its side when loading it into the car. Although such transportation of a washing machine is undesirable, it is still acceptable. If there are no other options, transport it on its side, just be careful.

You can also transport the machine in the following positions:

standing;
placing it on the back wall.

IDEAL transportation, according to service center specialists, is with a fixed tank. The car turns sideways in the direction the car is moving. If there are other things, it is worth clamping the machine with them. This will ensure the safety of shock absorbers, contacts and pipes.

Subtleties of transportation

Attention! Do not turn the CM over under any circumstances!

It is better to organize transportation on your side or lying down than upside down. In any case, moisture will remain in the machine, which can drain onto the control panel. Repairs will be expensive, so either dry the car before moving it or don't turn it over.

Before transporting the washing machine on its side, if there are no bolts for transportation, secure the tank with foam rubber.

And don’t forget about the detergent intake - there may be water left in it that will pour onto the board. It is better to take out the cuvette and transport it separately from the body. If this is not possible, wipe the part dry.

Carrying on the rear wall is available for all SMA models except Zanussi. In machines of this brand, heavy counterweights are located in such a way that in the “back” position they can crush the filler valve.

Not knowing how to transport a washing machine correctly, some owners manage to carry it to the front wall. This is strictly prohibited. In this case, it is almost impossible to deliver the entire hatch and cuff to its destination.

What happens if you neglect proper transportation?

Not knowing how to transport a washing machine in a car, washing machine owners sacrifice the serviceability of their equipment. Just one short trip, even lasting 10-15 minutes, can result in a complete breakdown of the SMA.

These problems await malicious violators of transportation rules:

Broken power cord.
Breakage of plastic parts of the case.
Hatch cuff rupture.
Damage to the hatch fastener or guide.
Damage to shock absorbers.
Rupture of rubber parts: pipes and hoses.
Oxidation and short circuit of wiring, contacts.
The program selector wheel on the control panel is damaged.
Drain pump failure.
Breakage of an unsecured powder tray.

As a result, it becomes clear that before transporting the washing machine, it is worth preparing it thoroughly for this.

Keep a close eye on it during the entire move - from the door of the old bathroom or kitchen to the new location where the SM will be installed.

Now you know whether it is possible to transport a washing machine on its side, how to do it correctly, and what the consequences of home-made transportation without observing safety precautions can be.

P.S. Advice for drivers. When moving along our roads, you should avoid bumps and slow down in time. The optimal speed limit will ensure the delivery of the machine safe and sound.

Transportation of new equipment

For the first time, the device has to be transported after it was purchased in a store. For many, the problem is solved simply - ordering delivery to your door. The machine is in its original packaging, and therefore is reliably protected from all kinds of shocks. Within reason, of course.

This delivery method is very convenient, and often the free option is offered as an attractive bonus when choosing the most expensive models. In addition to the absence of hassle with finding movers and transport, this method is also beneficial to the client due to the fact that the store itself bears responsibility for the integrity and safety of the cargo.

However, immediately after delivery, it is advisable to check the delivered washing machine for damage, integrity of packaging and contents.

How to transport a used car correctly?

It’s a completely different matter when it comes to transporting a model that has already served a certain period of time. Many owners have never even heard of shipping bolts for securing the drum, let alone remember where they went. Factory packaging has long been taken to a landfill. The truck for moving is also chosen not the one that is most needed, but the one that is cheaper. Naturally, in such cases. You should carefully prepare for transporting the washing machine. And this needs to be done in advance, so as not to reinvent the wheel in a hurry.

Stage one: preparation

Like any other household device, the washing machine must be thoroughly emptied of its contents. In this case, these are the remaining water that are in the tank itself, even those that often settle at its bottom.

To do this, remove the hose from the drain hole by tilting the machine towards the drain and placing a low tray under it or placing a rag under it.
After the procedure, you should turn off the machine from the network.
Thoroughly wipe the seal and the drum itself, as well as the body of the device, with a dry, clean cloth. Leave it open for a day so that any remaining moisture can evaporate.
All detachable parts, cords, hoses must be carefully secured to the body. Regular tape is quite suitable for this. In addition, the cord must be wrapped in soft cloth to avoid kinks.
Next, we attach the powder tray and the hatch door. Do not skimp on tape: not a single part should fall off or open during transportation.

Important point! For those who have not saved additional parts of the unit from the moment of purchase, the relevant question is how to transport a washing machine without transport bots? Shipping bolts can be purchased at almost any hardware store. Don't remember where the complete ones went? Buy an additional set!

If you don’t have time to go shopping, you can secure the drum with improvised means. However, to do this you will have to remove the top cover or bottom of the case. In the opened space you need to place foam rubber, polystyrene foam or a large piece of soft fabric. It will prevent the drum from vibrating while driving and will help avoid cracks and other damage to the tank.

If you have packaging bubble wrap available, wrap it around the perimeter of the case to reduce scratches and chips. If there is no special film, it doesn’t matter. There is always an old blanket in any home.

Stage two: transportation

It is not for nothing that strict requirements are imposed on the transportation of the unit: its shaking-sensitive “filling” can fail, turning a functional device into a prop.

So, how to transport a washing machine correctly?

The device can only be transported in an upright position. This is stated in any instructions.
The drum, as mentioned earlier, must be securely fastened.
Before setting off, the car must be carefully secured in the body. Professional carriers have a special roll-out trolley for this case, while amateurs have slings with fastenings.
The driver should also follow some important guidelines, such as choosing a route with the fewest turns and pedestrian crossings to reduce the risk of sudden turns and braking. Observe the minimum possible speed limit in the area.

How to correctly break the rules?

Violation of existing recommendations from manufacturers for each stage of transportation of washing machines can result in very unpleasant consequences. And, nevertheless, there are many cases when it is simply impossible to act according to the rules. All that remains is to break them competently. Let’s make a reservation right away: in this case, only you yourself will be responsible for the breakdown. Even the truck driver will have nothing to do with it.

In the most hopeless cases, you can try experimenting. Let's figure out how to properly transport a washing machine in a lying position:

The bottom of the body must be covered with soft, bulky material: foam rubber, an old blanket, an unnecessary mattress.
The machine must be carefully secured using tie-down straps, slings or ropes.
The device must be placed carefully on the back wall; under no circumstances should a horizontally loading unit be placed on the side where the hatch is located!
It is best to place the washer body along the longitudinal axis of the car, along the motion vector.
Think in advance about who will load and unload your equipment when moving. The weight of a washing machine can reach one hundred kilograms. Only two strong men can handle this kind of work. If the model is large (some old-style models can be about 80 centimeters in height and about the same in length), then it is better to play it safe and invite three loaders.

The price of a mistake

We would like to warn fans of experiments about what the consequences of improper transportation of household appliances may be. It is not necessary that all these troubles will happen to your car, but this possibility cannot be ruled out, especially considering the state of our roads. If transportation rules are violated, the following may occur:

damage to the integrity of the power cords,
breakage of plastic body elements,
gusts of the cuff and destruction of the hatch fastenings,
failure of tank shock absorbers,
ruptures of hoses and pipes,
getting the electrical wiring wet, which can lead to a short circuit,
breakdown of the control panel toggle switch, drain pump and loose powder cuvette.

Naturally, in the best case scenario, after this, you will have to fork out for expensive repairs. And in the worst case - for a new washing machine. Therefore, we advise you not to neglect the manufacturers’ recommendations. And also take care in advance

Transporting large household appliances, which includes a washing machine, is a separate topic for discussion. Regardless of whether you are buying new or transporting an item when moving, you must comply with the manufacturer's requirements. There are no problems when transporting new equipment in its “original” packaging - just follow the markings on the box.

Things are more complicated with a machine that is in use. Ideally, the equipment is placed in the original packaging, and foam is placed in the wall. However, buyers usually store the packaging for 14 days, and then dispose of it like any other household product. Instructions, components and fasteners are rarely preserved. What remains is a “lonely” washing machine, the transportation of which will have to be improvised.

The process of transporting a washing machine by movers from the Rus Perezd company in Novosibirsk begins with preparatory work:

After completing the preparatory stage, the loaders of the Rus Perezd company transfer and load the washing machine into the GAZelle car. If the house is equipped with a freight elevator, then delivering the device to the lower floor will not be difficult. It’s another matter if there is no elevator, and you need to lower the car from the top floor of a multi-story building - this is more difficult (taking into account the dimensions and weight of the equipment). Our specialists carry the device in a strictly vertical position - without turning it over. A slight tilt back is allowed.

This is followed by loading into the GAZelle car and placing it in a natural vertical position - standing (remember that the tank is fixed). In the back, the equipment turns in the direction of vehicle movement and is securely attached to the side with rigging straps.

Subject to the transportation rules and our preparation tips, the machine is safely delivered to the new place of “work”.

Transport without transport bolts

If the transported bolts have not been preserved, the upper wall of the device is removed, the space between the walls and the tank is filled with foam rubber, polystyrene foam, or anything with a fabric base (some people use kitchen sponges for dishes, pieces of old padding polyester blankets). After fixing the tank, the top wall is returned to its place and secured.

Before using improvised means, visit the nearest hardware store and purchase transported bolts - this way you are guaranteed to protect the washing machine from possible damage during road rolling.

Is it correct to transport lying down or standing?

When ordering turnkey transportation of a washing machine (), the specialists of the Rus Pereezd company place the device exclusively in a natural position - standing.

If you plan to transport the car yourself, you should follow the transportation rules:

Features of transporting vehicles with vertical loading

Above we described the process of preparing, carrying, loading and transporting a front-loading automatic washing machine. There is only one peculiarity of transporting machines with vertical loading - you only have to fix the loading hatch (the machine does not have a separate cuvette for detergent, the powder receptacle is built into the hatch or is absent altogether - as, for example, in a semi-automatic machine).

If you do not follow the rules for preparing and transporting the washing machine:

The process of transporting a top-loading and front-loading washing machine by specialists from the Rus Pereezd company in Novosibirsk does not take much time compared to trying to do it yourself. Negligence and inattention of handicraft workers will lead to damage to the integrity of the housing and malfunction of the electronics. In this case, the funds saved on transportation by a specialized company will be used for repairs, or in the worst case, the purchase of new household appliances. Remember that “the miser pays twice”!