Checking for iOS updates doesn't end there. IPhone stuck checking for update to new iOS system, how to fix it

When do you plan to update? iPhone iPad to iOS 11.1/11/10 via WiFi, but the iPhone does not see the update in the settings or displays a message. "Unable to check for updates." When checking for an update software An error has occurred. Go through all the steps to fix it easily.

I can't update the software on my iPad. Apple online support says to go to Settings/General/Software Update? I'm trying to update to ios 11. The problem is that the iPhone does not see the update, there is no software update to choose from. I've looked everywhere for it and can't find it. Please let me know what to do?

IPhone doesn't see iOS update, there are usually a few small things that can cause things to go wrong. Your friend may have installed latest version iOS, but you don't see it as an option in Software Update, or you tried to update iOS, but it doesn’t want to install. Your iPhone may have been broken, or you may have lost data and found that your settings have changed after performing an update.

In this article, we will look at the most common problems that people have when their iPhone does not see an iOS update.

When Apple first launches a new version of iOS, it may take some time for the update to become available. Sometimes your friend may receive the update before you. Or maybe your iPhone is not capable of running the software, in which case you won't see the warning at all.

For iOS launch 11 you will need one of the following devices:

Plus any new Apple devices with iOS.

If you have an iPhone 5C and an iPhone 5 or anything older, you're out of luck! iOS 11 will not work on your iPhone.

Additionally, another very common iOS 11/10 update error is when you go to Settings > General > Software Update and install the newest version on top of the old one. Also, the iPhone does not see the iOS update, it does not appear at all or displays the message “Unable to check” for updates. An error occurred while checking for a software update." Especially since iOS 11.1/11 was released, many users encountered this situation and asked why iOS 11.1/11 is not showing up in Settings?

This problem can occur due to various factors. But don't worry. You can try the following tips to help your iPhone 8/X/7/6s/6/5s see the update.

Make sure Apple servers are working properly

Sometimes Apple servers have problems, and at this time you decide to update your iPhone or iPad to iOS 11.1 / 11. Your iPhone will not see the iOS update, or you will not be able to check the problem with the update. So, the first thing you need to do about this problem is to visit the web page.

If the condition Apple systems is displayed in yellow, which means this moment something is wrong with this server. And all you can do is wait or contact service Apple support. If all servers are displayed green, this means they are all working fine. Then you need to move on to the next step below.

Most often, the iPhone does not see the update due to a profile conflict.

You may have a profile conflict on your Device. Because of this, your iPhone does not see the iOS update. In such a situation, if you delete the profile, the problem will not be solved; to receive further updates, follow these steps:

Step 1: Reset all settings

Go to Settings -> Basic -> Reset all settings .

After this, you will be asked for a Master Password, enter it and wait until your iOS reboots.

Step 2: Reinstall the profile

Now you need to do reinstallation profile, no matter what your public or developer profile is.

Go in Settings -> Basic -> Updates.

Check if a new version of iOS is available. If all else fails, perform an iOS restore.

Tip 1: Make sure your iPhone is connected to Wi-Fi

Over-the-air updates require iPhone and iPad to be connected to Wi-Fi and battery capacity of 50% or more. (We sincerely recommend putting it on charge). If Wi-Fi is connected, you can also turn it off and turn it back on after a few minutes.

If so far since iPhone Doesn't see the iOS update in settings or can't check for updates. Try to force restart your device: press and hold the on/off button.

Continue holding the On/Off button, then press and hold the Home button > Hold them until the screen turns on and shows the Apple logo. Then go to Settings > General > Check Software, your iPhone should see the iOS update.

Sometimes this happens due to the network. You can reset it on your device to do this: Go to Settings > General > Scroll down to Reset > Tap Reset Network Settings.

If you downloaded the iOS 11.1/11 beta on your iPhone or iPad, it won't appear in settings due to this. You must first uninstall the beta version and then proceed to update. How to remove beta version? Settings > General > Scroll down to Profiles and Device Management > Click on the beta version and delete that profile.

Tip 5: Update iOS 11.1/11/10 using iTunes or iCloud

If all the above methods do not work, then the last option we can think of is to abandon the OTA and turn to iTunes for help. We have also prepared practical guide for assistance in updating iOS 11.1 / 11/10 in all ways: ?

Let's summarize

With these methods you can fix iPhone problem Doesn't see iOS 11.1/11/10 update in settings. We really welcome any other method, if you have one or more please share it in the comments below. To help more people suffering from this in iOS 11.1/11 does not appear on iPhone or iPad.

When Apple company releases an operating system update for iOS devices, we can see and download it through the Settings - General - Software Update application. As a rule, a red icon with the number “1” appears next to the Settings application icon, signaling an update.

iPhone doesn't see updates

On some mobile devices For some reason the red badge does not appear next to the icon. Moreover, if you go to the “Software Update” section, the iPhone freezes, thinks for a long time and starts looking for an update. And for some reason it doesn’t find it, although other users may immediately see the update. Why doesn't my iPhone see updates? What could be the reason?

What to do if your iPhone is stuck checking for an update

If your iPhone is stuck checking for an update, most likely the device has caught some kind of system glitch and therefore does not see the update. First, you can try the easiest way to solve this problem - reboot your phone. When the device restarts, open the Settings app again - General - Software Update. If iPhone found update, you can start downloading it and installing it via OTA. If your iPhone is stuck checking for updates again, then you need to use third party tools– Tenorshare ReiBoot program.

So you need to do next steps:

As you can see, Tenorshare program ReiBoot can solve the “iPhone stuck checking for update” problem in just a couple of clicks. And that's not all she's capable of. Using the Tenorshare ReiBoot utility, you can solve most of the most common iOS problems: for example, if your iPhone or iPad freezes

Hi all. Today's section: “You need to know this and be prepared for anything!” :) Recently, a strange situation occurred during an iOS update. How to overcome it will be discussed in the article...

Symptoms

After the iOS update is downloaded, installation begins. And suddenly the installation hangs on the message “Checking for update” (in English iOS versions"Verifying update").

In this case, no matter how long you wait, the message will either continue to hang, or the device will turn off completely. The iPhone/iPad/iPod does not respond to button presses.

Solution

Well, first of all, we reboot the iPhone/iPad/iPod in a “hard” way. Press and hold two Home+Power buttons. The phone will return to its pre-update state.

What could be the reasons for the error and what to do about it?

Not enough free space for update. Most often this will be the case! Let's go to Settings->General->Storage and iCloud.

For a normal update you need at least 3-3.5 gigabytes. Free space it may be less, but if you have 0 to 2 gigabytes free, then the likelihood of a “Checking for Updates” error increases. Clear memory up to 3 gigabytes and try updating again.

Wi-Fi is not working/buggy/stupid. In this case, we check the Internet connection. We wait until the Internet starts working, or we take measures for this (reboot the router, call the technical support of the Internet provider, etc.).

The update was downloaded with errors. In my opinion, the most incredible case... Come to Settings->General->Storage and iCloud. Look for the update in the list of programs. Click on it. Then delete it. And update again.

If none of the methods helps, then there are two solutions:

• try updating by wire via iTunes

Less mistakes everyone!

Since Apple released iOS 12, many people can't wait to see the new operating system. However, problems were identified. It is found that some users received the error after updating iOS 12. Don't worry, in this article we will share several ways to solve this update problem.

How to fix problem when updating iOS 12

Method 1: Force Reset iPhone

The iOS 12 update for Apple devices may have been fixed. However, the device may freeze during the update. Forced reset allows the user to resolve any problems that arise at an early stage.

Force reset for iPhone XS/XS Max/XR/X/8

• 1. Press and release the Volume Up (+) button.
• 2. Press and release the Volume Down (-) button.
• 3. Press and hold side button until the Apple logo appears. Don't release the Side button, even if the screen goes black, until the white Apple logo appears on the screen.

Force reset for iPhone 7/7+

• 1. Press and hold the Sleep/Wake and Volume down buttons simultaneously for a while.
• 2. Hold the buttons until the Apple logo appears on the screen.
• 3. After the logo appears, release the buttons and the phone will restart.

Force reset for iPhone 6 and earlier devices

• 1. Press and hold the Home and Lock buttons at the same time.
• 2. When the Apple logo appears on the screen, release the buttons.

Method 2: Reset network settings

To update you will need permanent connection to the Internet. iOS 12 update may be affected by required update due to bad network WiFi. So you should reset network settings Wi-Fi networks and passwords, cellular networks etc. to ensure secure connection to the Internet: Go to Settings - General - Reset - Reset network settings




Method 3: Fix iOS 12 bug using ReiBoot

This is a program to fix various common problems such as iPhone/iPad, iPhone stuck on iTunes, stuck in recovery mode, DFU mode, etc. This is just one solution for iPhone recovery without data loss. Moreover, it can fix all kinds of screen problems, iTunes errors and many other problems that iPhone users often encountered when updating iOS. Undoubtedly, ReiBoot has a simple and streamlined interface that makes it easy to use. Simple steps to fix problems with iPhone when updating:

Step 1: Download and install the program on your computer.




Step 2: Open this recovery program and connect your iPhone/iPad to your computer via USB cable. Once the device is recognized, click “Fix all iOS freezes.”




Step 3: Click "Fix Now" to begin system recovery.




Step 4: The process will take a little time. Do not disconnect the device during the process. Once the recovery process is complete, the device should boot as normal.




Conclusion:

In conclusion, if iOS 12 is stuck when updating on your Apple device, it can be easily restored. Tenorshare ReiBoot is highly recommended as there is no data loss while using it and it is very user friendly. You can easily solve problems() in iPhone with this software and enjoy your new beta version of iOS 12 without fear of your iPhone hanging.

Wednesday after iPhone presentations 7 and iPhone 7 Plus, Apple released the Golden Master (GM) update to developers, followed by a public beta release the next day. The final version was released on September 13.

Everyone was really looking forward to the release new firmware, but as often happens with the release of new software, errors appear that prevent installation. For example, today many users encountered the “Software Update Failure” error that appeared when installing iOS 10 over the air (OTA).

This is one of the most common problems faced by users when upgrading to new version iOS. This error encountered when updating iOS 8 and iOS 9.

The error contains:

Software Update Failure

There was an error loading "iOS 10".

If you are facing this problem, then luckily we have several solutions for this problem.

Solution 1: Try again

When an error pop-up appears, you will be given two options - “Close” and “Settings”. Click the Close button to close the error message, wait a couple of minutes, and then proceed to install iOS 10 again.

Solution 2: Wait a few hours

With the exit final version iOS, millions of users are trying to download and install iOS 10. Great amount traffic is directed to Apple servers, this means that there will definitely be some delays. Therefore, it is better to wait for a few hours or days until the load on their servers decreases.

Solution 3: Update to iOS 10 using iTunes

If none of the above methods help, then try connecting your device to your computer and launching iTunes. Then, on the Review tab, click Update.

Solution 4: Install iOS 10 using a file

As a last resort, you can manually download the iOS 10 IPSW file and use it to update your device. This usually solves the problem since you are not dependent on Apple servers.

This method is recommended for experienced users, as it requires you to manually update to iOS 10. If you regular user, then it’s better to wait a few hours and try the update again. If you can't wait to get iOS 10 right now, then follow the instructions below to download and install iOS 10 using IPSW files:

• Download the iOS 10 IPSW file for your device. Make sure you have downloaded correct file IPSW that matches your device model.

iOS 10 for iPhone

• iPhone SE – iPhoneSE_10.0.1_14A403_Restore.ipsw
• iPhone 6s, iPhone 6 – iPhone_4.7_10.0.1_14A403_Restore.ipsw
• iPhone 6s Plus, iPhone 6 Plus – iPhone_5.5_10.0.1_14A403_Restore.ipsw
• iPhone 5s – iPhone_4.0_64bit_10.0.1_14A403_Restore.ipsw
• iPhone 5, iPhone 5c – iPhone_4.0_32bit_10.0.1_14A403_Restore.ipsw

iOS 10 for iPad

• 9.7‑inch iPad Pro – iPadPro_9.7_10.0.1_14A403_Restore.ipsw
• 12.9‑inch iPad Pro – iPadPro_12.9_10.0.1_14A403_Restore.ipsw
• iPad mini 4, iPad Air 2, iPad mini 3 –iPad_64bit_TouchID_10.0.1_14A403_Restore.ipsw
• iPad Air, iPad mini 2 – iPad_64bit_10.0.1_14A403_Restore.ipsw
• iPad (4th generation Model) – iPad_32bit_10.0.1_14A403_Restore.ipsw

iOS 10 for iPod touch

• iPod touch 6th generation – iPodtouch_10.0.1_14A403_Restore.ipsw

• Connect your iPhone, iPad or iPod Touch to your computer.
• Go to iTunes Updates.
• Hold down Option/Alt (Mac) or Shift (Windows) and click Refresh. If you want to completely wipe your iPhone to get a “bare” iOS 10 without any data, then instead of the “Update” button, click on “Restore” while holding down the Option/Alt button (on Mac) or Shift (on Windows) .
• Select the desired ipsw file that you downloaded earlier.

These were all the ways to solve the “Software Update Failed” error. Did you manage to solve this problem?