Check who else is connected to my wifi. How to view and disable unnecessary users on my Wi-Fi router

Let's figure out how you can find out who is connected to your Wi-Fi. Today, numerous programs are used to protect personal data; they are considered safe. Some time ago, the use of such protection helped to make sure that access to your Wi-Fi is closed to outsiders, provided that good passwords are used, but looking at the “extra” guests will come in handy.

The use of graphics adapters and other devices allows you to select strong passwords. But if you cannot guarantee that your Wi-Fi network is inviolable, then you need to at least know who has connected and is already using your Wi-Fi. It's one thing when your neighbor uses your network. A completely different situation arises when your network can be used to commit criminal acts. Therefore, in order to avoid trouble, it is necessary to ensure the security of the network, look and find out who can be connected to it.

There are several reasons to look at who has connected to and is using your network:

A sharp decline in the speed at which data is transferred. But the fact that another user joined the network does not act as the only reason.
If you know that the devices are disconnected and the light continues to flash, then you should also check the connection of other devices to my WiFi.

What you need to view

To view the list of connected users, you need to go to the interface where the router settings are presented; this can be done from any device. Almost all WiFi routers have standard addresses - “http://192.168.0.1” or “http://192.168.1.1”. This information is usually found on a sticker located at the bottom or back of the router. If you or someone else changed the password during the setup process from the beginning, you will have to make an effort to remember it.

To enter the settings, open your browser and enter the address: http://192.168.1.1

Viewing a list of connected clients

D-Link

Recognizing guests is quite easy. After you enter the WiFi settings interface, you must immediately click on the “advanced settings” item, and then select the “status” tab and click on the arrow pointing to the right until the “clients” link appears. Next, click on the link.
After this, you will see a list of devices that are currently connected to the wireless network; they need to be checked. Initially, it is quite possible that you will not be able to determine which of them are yours and which are not, but you can view information about whether there is a correspondence between the number of Wi-Fi clients and the number of your devices operating on the network. Don’t forget to include phones, TVs, set-top boxes, and so on. If there is a certain discrepancy, then it may be time to change the WiFi pair. If you have not installed it yet, then you need to do it immediately, in the router settings section.

Asus

To find out the connections on this device, you need to select the “network map” menu item, and then press the “clients” button. In the list that appears, the user can see not only the number of devices and their addresses, but also network names, which will allow them to quickly and accurately determine the type of device connected to the router.

TP-Link

You shouldn't have any problems with WiFi with this device, since it has a standard login form. To be able to find out how much is connected to my router, just find the word Wireless on the right and select Wireless Statistics, where you can find the information.

Applications and utilities

Wireless Network Watcher

This utility can easily scan wireless networks and also display a list of devices that are currently connected to my router. You can also export a list of connected devices. It is possible that the program can sometimes scan the network in the background and alert the user if inconsistencies are detected.

Soft Perfect Guard

This WiFi application is free and can easily scan your network for the presence/absence of new devices that are connected to it. If the program can find an unfamiliar device, it instantly alerts the user that an intruder has been detected. If there is a device known to you, and you don’t mind it being connected to my router, you can easily add it to the “white list”, then next time the program will ignore it, and you can see who the real attacker is.

Improving wireless network security

The first rule is that you must always change your login and password. Combinations invented by manufacturers are easily hacked by attackers. To change the password, you need to go to the advanced settings, select the “system tools” tab and the “password” item. In the tab that opens, you can edit the password.
In the WiFi menu, you will need to select the “MAC Address Filtering” tab.
You need to enter MMAC addresses in the router's memory. Even if the owner of a third-party device is able to find out your password, he will not be able to quickly connect to your Internet.

Using the above tips, you can find out and see what kind of uninvited guest and how many people are using your WiFi network and connected to the router, and block his access to the free Internet.

Found a typo? Select the text and press Ctrl + Enter

Nowadays, no one will be surprised by the Internet almost everywhere. One of the technologies that allows this to happen is Wi-Fi. It makes our lives more comfortable and mobile in many ways. It's nice to enjoy the Internet from anywhere. And there are a huge number of gadgets that help us with this - smartphones, tablets, laptops and many others. However, the main advantage of Wi-Fi - its general availability - is also its main disadvantage. And many, knowing this, will not resist the temptation to take advantage of this feature. Agree that when the speed of loading sites or downloading a movie decreases, the thought “Is anyone else using my Internet?” runs through your head, along with versions of a computer virus and problems with your provider. Now we will help you figure out how to find out who is connected to your Wi-Fi, and what to do if your most unpleasant expectations are suddenly confirmed.

Securing your private WiFi network is the most important aspect when creating a HomeGroup

Everything through the router

The most common way to check for foreign connections does not require much effort from you. There is also no need to install any additional software. We will find out all the information that is needed for this using the web interface of your router. To do this, go to any available browser and enter 192.168.0.1 or 192.168.1.1 in the address bar (depending on the model of installed equipment). Then in the window that appears, enter the username and password (you can find them on the back of the router or in its technical description). The settings panel for your Internet connection will open in front of you. Here we find something with the words “wireless mode statistics” and in the tab that opens we can see a list of devices that use this wireless connection, find out their MAC addresses and how much data they received and transmitted. We look in the list to see if there are any unnecessary devices. You can recognize yours by the names you gave them or by MAC addresses. We look at them either in the device information (for phones and tablets), or go to “Start” - “All Programs” - “Accessories” - “Command Line” and, by entering the command “ipconfig / all”, look in the window that appears (for computers and laptops). Or, as a simpler option, you can initially turn off all devices that use Wi-Fi, and as a result, only the one from which you are searching should appear in the list.

If your worst fears are confirmed and someone else is using your router, you can choose one of the following options:

prohibit the connection to this device and be sure to change the password, since with just one ban, the “consumer” of your traffic may simply start using another device or change its MAC address;
add the addresses of all your devices to “allowed” in the router settings (you can see how to get there above). This method is more reliable, but to connect a new device, for example, your friend who came over for a cup of tea, you will need to add his device to your “white” list.

Useful program - Wireless Network Watcher

Another way to identify “illegal” connections is a specially designed program - Wireless Network Watcher. It can be downloaded for free, preferably from the official website. After installation and launch, it will scan the system and show a list of those who use your router. A small drawback of the program is that you can only view a list of connected devices and will not be able to block them. And if such a need arises, you will still have to return to the previous method to block or delete those who like to surf the Internet for free. You should also pay attention to the fact that this program will only help you if the device from which you want to search is connected directly by cable to the router.

Interface of the Wireless Network Watcher program, designed to detect and analyze Wi-Fi networks

A little about precautions

“It is easier to prevent a disease than to treat it,” as doctors say. In our situation, this statement is also very applicable. To avoid unpleasant situations when a stranger wants to enjoy the Internet at your expense, you only need to follow a few rules:

always set a password for your Wi-Fi, preferably a combination of lowercase and uppercase letters and several numbers (options 1111, 1234, qwer and your date of birth are not the best, take my word for it, if you don’t believe me, you can look it up on the Internet), it is also necessary change it periodically for prevention;
do not use the password and network name that the router will ask you to set by default, be original - come up with your own;
set the encryption mode in your Wi-Fi connection settings (starting from WAP 2 and higher).

Choose for yourself which of the proposed methods to see who is connected to my Wi-Fi. Both are good and reliable. No one in the modern world is immune from being hacked, but this is not the worst thing that can happen in life. Monitor your wireless connections, this will help protect not only your traffic, but also your personal files. After all, Wi-Fi was originally created to serve people and bring benefits, not negative emotions.

For most users who have a Wi-Fi network deployed, it is password protected. But this does not mean that no one can hack it and use the Internet.

If the Internet, which is distributed via Wi-Fi, has become work slowly, you need to check - maybe someone is brazenly stealing traffic. Almost any modern router allows you to do this. In this article we will look at how to find out the users who are connected to the router.

Let us immediately note that it will only be possible to find out number of connected devices, but who exactly uses the traffic and where it is located cannot be found out.

What you need to find out who is connected to WiFi

First of all, you need to log into the router management console. This is done very simply - enterip-address device into the address bar of any browser on any device connected to the router, be it a smartphone, tablet or desktop computer. On the page that opens, enter login and password and we get to the management console.

If practically no settings have been changed on the router, then the address will be 192.168.0.1 or 192.168.1.1 (these addresses are most often used on such devices), in turn, the password and login are adminAndadmin respectively.

If the above data does not apply, you can look on the box or on the bottom panel of the router. Usually they write there the data that is used to log in by default.

If this does not help you enter the settings, then the parameters have been changed. Then you will have to remember what exactly changed. If this is not possible, then the only option left is reset device to factory settings.

Determining who is connected to the TP-Link router

The manufacturer TP-Link places information about connected clients in the Wireless mode. Open in additional tabs Wireless statistics and look at clients who use wireless Internet.

Checking the list of clients on Asus devices

On Asus, things are a little different. First of all, you should click on Network map, which is located on the left. Below there will be a circle, under which you can see the inscription Clients.

Now all connections to the router at the moment will be displayed on the right side of the screen - their IP address and device names.

It is worth noting that even if the interface is slightly different from what is located in the screenshot, the opening principle will not change.

Checking the d-link router

On d-link routers, you first need to open Advanced settings(menu item located in the lower right corner). Now we are looking for the selected area Status, where you need to click on the double arrow on the right until the inscription appears in the center Clients.

Now let's look at the list of clients. Most likely, you won’t be able to figure out who exactly is connected to the router by looking at the address. But you can simply count how many devices are currently connected to the router. If the actual number and the number of connections do not match, then it is worth taking measures to secure your network.

What to do if someone is using Wi-Fi

If someone is using your wireless connection, there is only one thing you can do - Change password for connection. You should set a complex combination of letters and numbers to avoid a similar situation in the future.

There is a more exotic option. Some routers allow you to configure access via MAC address. In this case, only those devices that are allowed access will be able to connect to Wi-Fi. But this method has several disadvantages:

Difficulty setting up. The procedure itself should not cause difficulties, but entering all the mac addresses of all devices is a rather lengthy procedure.
Support. Not all routers support this feature.
Difficulty connecting. With this connection method, you cannot simply give the password to a friend. Now you will need to go to the management console and add its mac address to the list of allowed ones, otherwise the Internet will not appear on the device.

Greetings, dear friends. As you can understand from the title, today we will talk about how to find out who is using your WiFi network. In this article I will try to explain in understandable language what you will need to do. We will also look at how to identify those connected to you as on a router ( we will consider all popular routers), and with the help of a special program. Well let's go!!!

Reasons for concern

So what should make you think that someone is connected to your Wi-Fi network?

Of course, a sudden renaming of your WiFi network. Since on almost all routers the login/password for entering the router configuration interface is standard (this is admin/admin). Then any attacker can come in and change the name of your network.
Another reason to assume that someone has connected can be a sudden loss of speed, especially if this happens at a certain time. For example, in the evening when most people come home from work. But here you need to understand that a loss of speed can occur not only due to an attacker connecting to the router. But it’s absolutely worth checking this point.
If you disconnect the entire device from your WiFi network. And the Wi-Fi indicator on the router will not stop blinking intensively, this means that a device is connected to your network that you do not know about.

Now if one of the top points matches yours, then it’s worth checking who is connected to your network. And this article will help you with this, read on.

How can I see who is connected to my Wi-Fi router?

Now we have come to the point that we need to check who is connected to our WiFi router. The most convenient way to do this is to see who and the Catholicity of the connected devices are in the router settings interface. To do this, you need a laptop or computer connected to your router. Open your browser and write the address of your router in the address bar ( Each manufacturer has its own address, and your router may also have its own unique address, you can find it out from the article). After this you will need to log in( if you don’t know how to do this on your router model, description for almost everyone). And in the settings interface, find the tab responsible for monitoring your network.

Well, in theory everything looks simple, but for the average user it will seem like a very difficult task. Therefore, I will describe in detail where and where to go for the most popular models.

Watch on Asus router

If you have any router from ASUS companies. You need to open any browser and follow simple steps:

In the address bar of the browser, write the default router address 192.168.1.1 (if it is not suitable, see the link above on how to find out the router address)
In the authorization field, enter your Username (Login)/password. By default it is admin/admin.
In the window that opens, on the left in the menu we find Network map then in the middle next to the computer icon, click on the number opposite the inscription Clients. After that, in the right block Client status All connected devices to your router will be displayed.

Watch on a TP-Link router

In order to find out who is connected to the Wi-Fi network of any of the TP-link company routers. You will need to do simple steps:

Open any browser and write the address of your router in the address bar. By default it is 192.168.0.1.
Now you are in the router configuration interface. Select fields in the left menu Wireless mode and then Wireless statistics. A list of all connected devices via WiFi to your router will appear in the window that opens.

Watch on Zyxel router

To find out who is connected to your router from Zyxel companies, perform several steps:

Open the browser and write the address of your router in the address bar. By default it is 192.168.1.1.
Then, in the authorization window, fill in the Username (Login)/Password fields. By default it is admin/admin.
Now you are in the router configuration interface. In the bottom menu on the page, select the first tab System Monitor. then look at the very top and select the tab home network, and in the block A list of connected devices We look who is connected to the router.

Find out who is connected to the WiFi network using the Wireless Network Watcher program

To determine who is connected to your Wi-Fi network, there is a convenient PC program called Wireless Network Watcher. It works very simply, all you need to do is download the program. Install it on your computer, after launching it, in a couple of seconds it will identify all devices on your network. The first device in the list will be your computer, the second will be the router itself, all the rest are those devices that are connected to your network.

Imagine that you have connected the Internet, configured a WiFi router, connected all your devices to your home network, and then you notice that the Internet speed does not match that stated by the provider. The first thing that comes to mind is to call the provider’s support service with complaints and swear about the discrepancy between the declared speed and the actual speed. But don’t rush to waste your time and your Internet provider’s employees’ nerves. It is possible that the issue is not a speed discrepancy at all. WiFi, in addition to being very convenient for creating a home network, also creates conditions for someone else to use the Internet you paid for. In order to find out if a neighbor is using your Internet services, let's figure out how to find out who is connected to my WiFi router.

There are several ways to determine which devices are connecting to your internet.. First, let's look at how to find out what devices are connected to your network using router control panels, and then I’ll tell you what it is software for this task. In any case, you will find out which devices are connected to your router.

Router to help

How to enter this control panel is written in the article: “”. To put it briefly, open the browser, enter 192.168.0.1 or 192.168.1.1 and press “Enter”. Next, a window will appear where you must enter your username and password, which should be written in the manual of your router or on the back of the router. I talked about this procedure in more detail at the link above.

To see exactly which devices are using WiFi, you need to turn off or disconnect all your phones, computers, tablets and laptops from that WiFi connection and reboot your router. Then connect only one device through which you will view the information in your router, and thereby answer the question of how to see who is connected to my WiFi.

I would like to immediately note that the data that I will discuss in this article may differ from yours. Since you may have a different router or a little known one. Of course, you will understand the logical chain of how to do this, and I, in turn, will give several examples of how to implement this on your router.

If you have a company router, then you need to go to “Basic Settings”, then go to “Wireless Mode” and then select “Wireless Mode Statistics”. After which information will appear on the right which devices are connected to WiFi.

In other models of this manufacturer, after entering the control panel, you need to find the “Wireless” section and select the “Wireless statistics” subsection in it or find the “Active Session” section.

After the examples described above, of course you need to find out how to look up the MAC address of your computer or laptop. To do this, click “Start” - “All Programs” - “Accessories” - “Command Prompt” and in the program that opens, enter the command “ipconfig / all”. The “Physical Address” line will contain the MAC address of your computer’s network card. You can find out the MAC address of your phone by looking at the device information in your phone settings. Thus, knowing the addresses of your devices, you can figure out other people's devices connected to your network.

If there are any, then change the password for your WiFi network. After a while, check to see if anyone has connected to your network again. If you again discover someone else’s device, then in the device panel, find the “MAC Filter” subsection. In this subsection, specify the MAC address of the intruder and set the “Disabled” property for this address. This will prevent this device from connecting to your router. But you need to understand that an attacker can take another device or change the MAC address.

If you have a router from D-Link, then after logging in you must go to “Status” and then select “Wireless” on the left. In the main part of the open page, information about connected devices via WiFi through this router will appear on the right.

If you remember, I said that manufacturers can hide this function, so, for example, on my Alcatel Lucent I-240W-A router this information is in the “Home Networking” section. This is what she looks like:

Please note that the number 2 is written opposite the “Wireless” line. This means that WiFi is currently being used by 2 devices, or maybe just connected.

But what to do if you haven’t figured out your router - you haven’t found where the information of connected devices to your router is displayed? In this case, you can use the software, which I will discuss in the next section of this article.

Wireless Network Watcher for device discovery

If you are still interested in the question of how to find out who is connected to my WiFi, then you can download and install the Wireless Network Watcher program. Using this program, it is very easy to identify devices connected to the network, it is also intuitive and distributed absolutely free. And besides, it supports the Russian language. In short, there are only advantages in use, fate itself;).

I want to say that you need to run this program on the computer that is connected to the router by cable. When launched, this program will automatically scan all devices that are part of your network and display the result in the form of a table, which will indicate the IP addresses and MAC addresses of those connected to the network, as well as the names of network card manufacturers. It will also contain the values “Your router” and “Your computer”. These devices are, of course, beyond suspicion. But if, in addition to these devices, there are others in the list, then using the MAC addresses you need to find out whether these addresses belong to your devices, for example, a laptop or phone. This is done in exactly the same way as in the first method.

If you want to restart the scan, click on the green “Play” button.

This program has a wonderful background network scanning feature. In the program settings, check the “Put Icon On Tray” item to enable this option. Now you can close the program, it will minimize to tray and will constantly run the ping command to detect new devices on the network.

Finally, I can give you some tips on protecting your network from unauthorized access:

Always set a password for your network. You can find out whether your network is password protected by the icon of your WiFi network in the list of available connections - if there is no password, an exclamation mark will be displayed on the icon;
Change the login and password of the WiFi router, which are set by default by the manufacturer;
Come up with your own network name. Do not use the name that the router creates itself;
Use WPA2 network password protection. Only it provides virtually guaranteed protection against penetration into your network.

These methods will allow you not only to protect your Internet from fans of free web surfing, but also to save your confidential data from possible intruders. We have discussed 2 ways to see who is connected to my WiFi, but which method will be more convenient for you is up to you to decide.