Hard drive life check program. Check using standard Windows tools. Hard drive diagnostics: programs for testing HDDs for bad sectors

Hello friends. Checking the hard drive or how to check a hard drive for errors and bad sectors, we will talk about this in detail today.

In the previous article I showed. Today you will learn about programs for testing hard drives and other storage media. At the end of the review I posted a short video tutorial.

Checking our disk

It is useful for anyone who has a computer to know about the status of the hard drive or drives, if there are several of them. After all, the hard drive stores information that is important for some, and not so important for others. So, in order not to lose it, I recommend making backup copies at least once a month.

You can purchase a portable disk or flash drive to store important information, or you can use regular CDs and DVDs. If you don’t know how to save information on optical plastic discs, then I recommend reading.

You can test computer disks in different ways and with special programs. In this article we will look at:

• Checking the disk using Windows 7
• Useful Victoria v4.3
• HDDScan program
• Ashampoo HDD Control 2

There are, of course, many other useful and worthy programs and utilities, but in this publication we will only talk about these 4 methods.

How to check your hard drive using Windows 7

Any hard drive or flash drive can be checked for functionality using Windows tools. I wrote more about this here. Here is a simple algorithm for the necessary actions.

Go to My Computer, select the desired hard drive or flash drive, right-click on it and go to Properties.

Check the boxes you need or all and click Start.

This procedure can take a long time, everything will depend on the size of the storage medium that you want to check for errors and bad sectors.

Checking the disk with Victoria

Victoria one of the main programs that I personally use to check the hard drive through Windows, or if the operating system does not start at all, then through a boot disk with this utility.

After downloading Victoria version 4.3, you need to go into the archive, unpack it or run the file with a green cross called Victoria43.

Let's launch the program, it's in English, if you don't know this language, don't be alarmed, I'll help you figure it out.

The Standard window describes the main characteristics of the storage medium: its model, serial number, disk size, how many cylinders, sectors it has, and so on.

In the Smart tab you can see the status of the hard drive. Click on the Get Smart button and look at the indicators that appear. Since my hard drive is new, my indicators are normal, SMART status = Good. You may have different meaning and information.

Smart is a technology of analysis, self-control and reporting. Using it, you can view and evaluate the condition of the hard drive, its built-in self-diagnostic equipment, and also predict the possible time of its failure.

To test the storage media, go to the Test tab and click on the Start button. If you have a lot of green, orange, red and blue rectangles (sectors) - this is not good. Ideally, all sectors should be light gray and grey.

If you have damaged sectors marked “Err X”, then after completing the test, check the box next to the word Remap and run the test again. The Victoria program will try to restore these sectors and fix errors on the hard drive.

Checking the hard drive may take a long time, so be patient, it all depends on the amount of information on the media. In the meantime, testing is underway, I recommend reading the article on how to set up your computer yourself or.

Checking the hard drive using HDDScan

HDDScan is a program for diagnosing and testing hard drives in English.

After downloading, you need to run the file called HDDScan.

Select the desired Select Drive device; on the right there will be basic information about it.

Click on the blue round button and select the desired action. Go to Surfase Test - select and run the test.

Check the boxes next to Verify or Read and click the Add Test button. I do not recommend choosing Erase - it erases data.

Once you click add a test, it will start automatically and will appear in the lower Test Manager window.

Double-click on RD-Read, go to the test that has started and look at its process, you can see it on the Graph.

View on Map. At the top there are navigation buttons for controlling the Pause, Stop and Report test process, cluster and testing speed in KB/s, and on the right is the sector scanning time in numbers from< 5 до >500 milliseconds.

In the third column of Report you can see the scanned clusters and sectors of the storage medium, and at the very bottom the progress of the test process is shown as a percentage.

Upon completion of the test, a corresponding message will appear in the task manager window.

If for some reason you did not like the first three methods, then I suggest for your reference a powerful and useful utility for diagnosing hard drives and storage media from Ashampoo.

Cool program Ashampoo HDD Control 2

I have already worked with this utility for diagnosing and monitoring hard drives from Ashampoo. I really liked this program, so I decided to mention it in this article.

After you download and install Ashampoo HDD Control 2. Depending on the language package, the program can be in either Russian or English.

It has a simple and accessible interface that anyone can understand.

Here you can see probably almost all the information about a hard drive or flash drive that you want: model, partitions, size, condition, performance, temperature and much other useful information.

This program has extensive capabilities and many settings; at the top there are seven navigation tabs:

1. Control
2. Defragmentation
3. Testing
4. Disk Cleanup
5. Removing Internet Traces
6. Deleted files
7. Content Analysis

You can browse through all seven tabs and explore useful information.

We are interested in checking the hard drive, go to the Testing tab, click Scan hard drives, select the one you need and click on the magnifying glass that says Start. This test can measure the speed of your hard drive.

In order to check the surface of the disk, you need to return to the Control tab and click Surface Test.

After this, the Hard Disk Surface Testing window will appear, in which there are symbols: blue square - not yet tested, green - excellent, red (already bad) - at least one bad sector.

The scanning time will again depend on the capacity and speed of the hard drive or flash drive.

In custody

Today we discussed in detail the topic of checking a hard drive or how to check a hard drive for errors and bad sectors. To do this, we used four methods: standard Windows tools, useful Victoria, the HDDScan utility and the cool Ashampoo HDD Control 2 program.

Now let's watch a short video tutorial on how to check your hard drive.

Checking the hard drive | website

You may have questions related to checking your hard drive. You can ask them below in the comments to this article, and also use the form with me.

Thank you for reading me on

CHKDSK is a standard application for checking a hard drive for errors, detecting bad sectors on a hard drive, and correcting file system errors. The CHKDSK application (short for Check Disk) is built into the Windows operating system.

The Chkdsk.exe program finds file system errors, bad sectors on the hard drive, and eliminates detected problems. If checking the disk for file system errors reveals problems, the CHKDSK check runs when the computer is turned on.

There are some differences when using Chkdsk.exe in different versions of Windows:

• In Windows XP, the chkdsk utility finds file system errors and repairs bad sectors on the disk.
• In Windows 10, Windows1, Windows 8, Windows 7, Windows Vista, with default settings, the CHKDSK application finds file system errors, but does not fix them. To correct file system errors and check disk sectors, you must manually set certain parameters.

Problems with the Windows operating system affect its performance. File system errors occur in the following situations:

• Due to a power outage - if the computer suddenly turns off, an unexpected system failure may occur (to prevent such situations, use a UPS - uninterruptible power supply).
• If the system is infected with malware.
• Due to a computer hardware malfunction.

Bad sectors may appear on the surface of the hard drive. When checking a disk using chkdsk, bad bad sectors of the hard disk are marked as damaged, and the system no longer reads or writes information from bad sectors of the disk. The system will try to recover data from damaged sectors (clusters, directories), if possible.

The chkdsk disk scan runs in two modes:

• in the graphical interface using the system tool;
• using the command line.

If your computer does not boot due to a problem, you can check your hard drive using the Windows installation DVD. After booting from removable media, in the system recovery options, select the command line to run a disk error check.

In this tutorial, I will show you how to use the CHKDSK application using the Windows 10 operating system as an example.

CHKDSK check for file system troubleshooting in GUI

The easiest option for checking the file system for errors is to run the CHKDSK program in the graphical interface using system tools.

Follow these steps:

1. Launch Explorer.
2. Right-click on the local disk on which you want to scan.
3. In the “Properties: Local disk (X:)” window, go to the “Tools” tab.
4. In the “Check for errors” section, click on the “Check” button.

1. In the “Checking errors (Local disk (X:))” window that opens, select “Check disk”, despite the fact that the operating system writes that no errors were found when checking the disk.

In Windows 7, additional scanning options are available; to launch them, you need to check the boxes next to the items:

• Automatically fix system errors.
• Check and repair bad sectors.

1. The scanning process begins and will take some time. The scan time depends on the size of the local disk and the amount of data on the disk.

When checking file system errors, the status is scanned:

• The basic structure of the file system is checked.
• File name connections are checked.
• Security descriptors are checked.
• The USN log is checked.

1. After completing the verification process, information about its result will open. In this case, the disk was successfully scanned and no errors were detected. If errors are found, you will be asked to fix them.

For detailed information, click on the "Show Details" link.

In the Event Viewer window, click Details.

In the “Event Properties” window, in the “General” and “Details” tabs, detailed information about the result of the disk scan is available.

The information obtained about checking the disk for file system errors can be copied into Notepad or another text editor for further study.

How to run CHKDSK (check disk) on the command line

The chkdsk command to check a hard drive with the specified parameters is executed from the command line:

1. Run Command Prompt as Administrator. Read How to Find the Command Prompt in Windows
2. To check the system partition (system drive) in the command line interpreter window, enter the command:

chkdsk c: /f

1. Press the "Enter" key.
2. A message appears in the Command Prompt window indicating that the CHKDSK command cannot be executed because the specified volume is in use by a system process. To start checking the system disk after rebooting the system, press the “Y” key and then press the “Enter” key.
3. During the system reboot, the system disk will be checked and restored.

A sample command template looks like this: ["chkdsk" (application name)], space, [drive letter of the drive being checked followed by a colon ("c:", "d:", "f:", etc.), path, or filename], space, [command options].

Command parameters have the following meanings:

• /F - checks the file system and automatically corrects errors found.
• /R - search for bad sectors on the disk, restore the contents (the command requires the /F key, example: “chkdsk C: /F /R”).
• /V - displays full file paths, displays file names on the disk, in the NTFS file system - displays cleaning messages.
• /X - disable the disk before scanning, the descriptors of this disk will not be scanned (the mandatory /F key must be set, example command: “chkdsk C: /F /X”).
• /I - Performs a less stringent check of index items; CHKDSK performs a faster but less thorough check.
• /C - skips checking cycles within the folder structure.
• /L: size - Changes the log size to a value specified in kilobytes.
• /B - reset the scan results, re-check previously found damaged hard disk sectors (the /R key is required, example command: “chkdsk C: /F /R /B”).

In most cases, to check the file system and eliminate bad sectors on the hard drive, it is enough to use the “F” and “R” flags.

How to disable disk check in CHKDSK when Windows boots

In some cases, disk check runs when you turn on the computer, before loading the Windows operating system. In most cases, you need to wait until the check is completed; a restart will not follow.

Constantly checking the disk every time the system starts, indicates the presence of problems and the need to eliminate them. You may need to consider replacing your hard drive. There are programs, for example, that constantly monitor the status of computer disks.

To disable Chkdsk from starting when Windows boots, you can use 2 methods: changing values ​​in the operating system registry, or using the command line.

Disabling disk check on the command line:

1. Run Command Prompt as Administrator.
2. In the command line interpreter window, enter the command (“C:” is the name of the drive on which you want to disable the startup of Check Disk when the system boots), and then press the “Enter” key:

chkntfs /x with:

• If you need to disable scanning on several drives, add the corresponding drive letters to the command separated by spaces, for example, “chkntfs /x c: d:”.
• Using the command “chkntfs /d” you can return the original settings.

You can disable automatic disk check when loading the operating system in the following way:

1. Launch Registry Editor (type “regedit” in the search field, run the command).
2. Follow the path:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

1. Click on the “Session Manager” option.
2. Find the “BootExecute” parameter, left-click on it.
3. The Edit Multiline window displays the default value.

1. To disable disk checking during Windows startup, add the following parameter before the asterisk:

autocheck autochk /k:C *

1. To disable scanning on multiple partitions, add drive letters separated by a space. Example for drives “C:” and “D:”:

autocheck autochk /k:C /k:D *

Conclusions of the article

The CHKDSK system application, built into the Windows operating system, is used to check the file system for errors and to detect bad sectors on the computer's hard drive. Using the utility, you can fix system errors and eliminate the negative impact (disable writing and reading) on ​​the system due to the presence of bad sectors of the hard drive.

Have you started to hear extraneous creaks in the system unit? Has the system performance somehow dropped completely intolerably, although the processor and memory should not allow this to happen? Well, it's time to check the hard drive. Find out how to do this in our article.

This is quite an important matter. Besides the performance hit, although that's certainly important, it's about your data. You don't want to one day be left without all your data simply because your drive decided to fail? Here. Therefore, it is important to check the condition of the disc and its health level more often.

Correcting errors in a timely manner also helps increase the lifespan of the disk. Whether it's a regular hard drive or an SSD, file system errors wear it out at a rapid pace, so it's important to keep it in good condition. Otherwise, the data will be lost even faster.

If you understand the importance of this event, then let's get started.

Checking using standard Windows tools

This is the simplest method and can give you quite a lot of information about the hard drive and even try to fix some errors.

Read interesting information and reliable tips in the article -

Command line

If the previous scenario of using standard Windows tools is not very effective, then the command line method can try to supplement it. Its essence is that it is launched from the bootable installation media of the system, that is, the system itself is not running and cannot block some of the requirements of the verification program.

Important! This method has one disadvantage: you need installation media, and it is desirable that it comes with the exact version of Windows that is installed on your computer.

1. Create bootable media and insert it into your drive or USB port. In your computer's BIOS, select to boot from this media. Wait for the operating environment to load.

   

   

2. When the program reaches the window labeled “Start installation,” press the Windows key combination + F10.

   

3. Enter the following command in the console window that opens: chkdsk /f. Press Enter.

   

4. The scan will start. The program will display the results right there on the command line. She will immediately try to correct all the errors found.

   

Simple third party software

Let's look at a few programs that will help you identify most problems with your hard drive without going into too much detail about the process.

HDDScan

Using this program, you can understand in which sectors the writing and reading speed is high, and in which - not. The program is completely universal; with its help you can diagnose anything, as long as it is an information storage device.

The principle of working with her is extremely simple: you start scanning and wait for her report on the work done, from which it is quite possible to draw some conclusions.

Crystal Disk Mark

A more narrowly focused utility, although it essentially also monitors speed. The program can’t do anything else, but based on the writing and reading speeds, you can quite understand what’s happening with the disk and how much longer it will last.

Important! It is strictly forbidden to use this program if you want to check the SSD drive. His death when using this software will be even closer: this program fills the entire space with some data, and although it is weightless and deleted without a trace, for the SSD this is also wear and tear.

More complex software

If neither standard checking tools nor simple programs satisfy you, then you can move on to more complex checking programs. So, let's begin.

Victoria HDD

The most common program for troubleshooting hard drive problems.

Its advantages are that there are both quick and deep scans of the disk, and also that it monitors its temperature. This is also an important indicator, but it does not affect wear as much.

HDD Regenerator

Pro tool in our article. Corrects everything it finds in its path. Its huge competitive advantage is Russification. It is therefore very easy to use, despite the impressive range of functions.

The principle of its operation is much more complex than that of other programs, and these differences clearly benefited the program. She manages to restore what others could not. Also, unlike other programs, it does not destroy your files that were in the sectors it corrects, but preserves them culturally. Well, not life, but a fairy tale.

The program has two versions - graphical and console. If you are not very knowledgeable about this topic, use the graphical one with the Russian language, everything is intuitive there. In the console, its capabilities are much wider, because there is less pressure and restrictions from the operating system.

Let's look at the graphical interface.

On a note! However, this program has one significant drawback - it is paid, and the trial only allows for verification. Well, that’s good too.

Programs from hard drive manufacturers

Who, besides the manufacturers themselves, can know better how to work with hard drives? Some of these programs work only with disks of a certain brand, some - with all. Experiment.
Let's begin.

SeaTools

Essentially a simple program:

Data Lifeguard Diagnostics

This is the name of the verification program from the manufacturer WD. The functionality is approximately similar to the previous program, but has a number of advantages.

• firstly, it can be used with any disk. This is a huge plus, despite the prevalence of discs of this brand;
• secondly, she knows how to destroy information;
• thirdly, it can simply cut off dead sectors so that the disk runs longer at the same speed, albeit with a slightly smaller volume. Definitely an extremely useful feature.

All options are in context menus. That is, to start scanning a specific disk, you just need to right-click on it (in the program interface, of course) and select the desired action. That's all the work.

We hope these methods helped you deal with the problems of your machine, repair it, or prevent damage. Good luck!

Video - How to check your hard drive yourself

CrystalDiskInfo is a free program for servicing computer HDDs and SSDs with ATA (PATA, SATA), USB and IEEE1394 connection interfaces. If something strange happens to your hard drive, do not be lazy to download CrystalDiskInfo in Russian for your computer for free using the link from the site https://site without registration and SMS. The advantages of the utility include: displaying detailed, reliable information about the status, powerful monitoring and verification tools, as well as effective tools for changing hard drive settings. If problems are detected, Crystal Disk Info displays a warning and sends an email to the user.

Before a large number of bad sectors appear, read and write errors, unpleasant noise, the temperature rises, and performance decreases, it makes sense to download the useful CrystalDiskInfo program for free for a computer with the Microsoft Windows XP, Vista, 7, 8, 10 (32- bit and 64-bit). The utility is quickly installed on your computer and uninstalled correctly, without being tracked in the system registry. When you start the program, it checks the status of the hard drive of your computer or laptop; this takes some time.

Checking, monitoring, analysis, graphs and changing settings

When checking, the utility displays detailed information, including information about external HDD USB and IEEE1394. Displayed: firmware version, AAM*/APM** data, interface type, spindle speed, buffer size, operating life, number of bad sectors, temperature and even a graph of temperature dynamics over time, as well as other technical characteristics. S.M.A.R.T*** parameters are monitored, including: number of read errors, overall performance, start-stops and other data. CrystalDiskInfo dynamically tracks changes in a large amount of data from drives in the system, keeps a log and allows you to beautifully display this in the form of graphs. This format allows you to clearly see the overall health picture of the computer’s disk subsystem.

There will be people who want to download CrystalDiskInfo for free without registration and SMS, without leaving the https://site, also because the utility allows you not only to diagnose the hard drive, but also to take care of its health. Changing the AAM and APM settings allows you to control performance parameters and the corresponding amount of acoustic noise produced, as well as power consumption parameters. If necessary, it is possible to reset the bad sector counters. In the "Tools" menu there is a link to the system "Disk Management", where all the necessary transformations are done with them: create a partition, expand or shrink partitions, etc.

Interface and functionality of CrystalDiskInfo

The nice, modern interface supports many localizations, as well as themes (skins), three of which are available immediately after launch. Positive reviews and comments from users are caused by an intuitive display of the status in color: blue (or green) - good, yellow - warning, red - problems/alarm, gray - no information.

This small, free, open-source utility, developed by Japanese programmer Noriyuki Miyazaki (known as Hiyohiyo), is why many in Europe and America find the menus and settings confusing. The Japanese do not share this opinion. Unfortunately, there are no hints or explanations about the importance of parameters unfamiliar to the average computer user, and to figure it out, sometimes you have to refer to the help section.

Rich functionality allows CrystalDiskInfo to compete not only with free, but also with paid programs. According to reviews and comments from many users around the world, it is definitely worth downloading CrystalDiskInfo for Windows 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit) for free in Russian. Among the competitors, it is worth noting the paid programs HDDlife Professional and Hard Drive Inspector and the free Active@ Hard Disk Monitor with Russian language support, as well as the paid HD Tune Pro in English. As for the functionality of Crystal Disk Info, you definitely need to know about the following advantages of this utility:

• high data reliability,
• correct interaction with S.M.A.R.T technology,
• monitoring of more than 25 parameters,
• data on current operating modes in real time,
• temperature and S.M.A.R.T data monitoring,
• displaying disk temperatures in the system tray,
• prompt e-mail notification of problems,
• ability to change AAM/APM settings,
• control of speed and amount of acoustic noise,
• settings to save energy consumption,
• no conflicts with the latest versions of SSD drives,
• work with external HDDs with USB and IEEE 1394 interfaces,
• compatible with a wide range of equipment****.

reference Information

* Automatic Acoustic Management (AAM) - control of the track search time parameter, in this case, the faster the block of magnetic heads moves along the radius during search, the more noise.

** Advanced Power Management (APM) - energy management.

*** Self-monitoring, analysis and reporting technology (S.M.A.R.T.) - an internal self-diagnosis and self-monitoring system using hardware built into the disk with the ability to generate reports and predict the breakdown period.

**** A comprehensive list of compatible equipment is located on the official crystalmark website in the info domain.

Download the latest version of CrystalDiskInfo in Russian

Free programs download for free

Now you are on the page "Russian Crystal Disk Info - checking the hard drive and taking care of its health", in the Computer Tests section of the site, where everyone has the opportunity to legally download programs for a computer running Microsoft Windows OS. This page was created/substantially updated on 11/20/2018. Thank you for visiting the section.

A computer or laptop is associated specifically with errors and malfunctions in the hard drive. In this article, we will figure out how to check the health of your hard drive using Windows tools and programs specially designed for this.

Checking for errors using standard tools

This method is equally effective for Windows Xp, Vista, 7, 8 and 10. Required:

If the notification “Windows cannot scan the drive that is currently in use” appears, click “Schedule scan”.

So now we do a reboot, and when the system boots, it will run a performance test through the BIOS and fix media errors. Its duration can range from 2-3 minutes to an hour, depending on the characteristics of the hard drive and its capacity.

Checking the hard drive for errors via the command line

To start the scan, you must complete the following steps: go to “Start/All Programs/Accessories/Command Prompt”. Right-click and click “Run as Administrator”.

In the window that appears, execute the command “chkdsk disk_partition: scan_parameters”. Please note that this method only works with disks that have been formatted in FAT32 or NTFS.

An example command is “chkdsk C: /F /R”. Its essence is as follows:

• Section C will be checked for errors;
• Any problems found will be automatically corrected (parameter F is responsible for this);
• Damaged sectors will be checked and information will be restored (parameter R);

If you want to diagnose the drive currently being used by the system, you will see a special notification. You will be prompted to run the scan the next time you boot your computer. To agree with this, press Y, to refuse - N. Based on the results of the check, you will have access to information about the verified data, the number of damaged sectors and errors found.

To get a complete list of options, run chkdsk with a question mark as an option. But if you need a regular check for errors and sectors, then the above information will be enough for you.

It happens that errors found during scanning cannot always be corrected immediately; it is likely that this is due to the program running at that time. In this situation, an offline scan of the drive will be required: it is disconnected from operation, diagnostics are carried out, and then it is connected back. To do this, you need to enter “chkdsk C: /f /offlinescanandfix” (C: - disk partition) into the command line. If it is not possible to disable it, the check will be performed at the next reboot.

If necessary, after the inspection you have the opportunity to study the inspection log. To do this you need:

1. Go to Windows/Applications Logs;
2. Right-click on Application/Search;
3. Search for the word Chkdsk;

Software check

Of course, the above method is not always effective. Therefore, we will look at a number of programs such as Victoria. They will allow you to conduct the most thorough analysis of the condition of the hard drive on your computer or laptop.

Victoria

A utility for diagnosing and testing hard drives. It will help you not only detect problems in its operation, but also eliminate them.
The program has a number of advantages and useful functions:

• Reads the hard drive passport and provides detailed information;
• 5 diagnostic modes;
• Eliminates crashes;
• Displays unstable areas;
• Hides defects;
• Evaluates media performance.

It is one of the best today. It can solve problems with bad sectors and quickly bring any type of hard drive into working condition.

HDD Regenerator

One of the most effective programs for assessing the status and troubleshooting drives. It makes it possible to obtain information about the current SMART status of the selected device and complete control over it.
Among the main features are:

• Simple and intuitive interface;
• Complete security;
• NTFS and FAT support;
• Pre-scan mode;

HDD monitoring in real time;
That is, with the help of a regenerator you can test the hard drive as efficiently as possible.

TestDisk

Designed to determine the status and test drives. In addition to simple diagnostics, it also detects bad sectors and corrects any errors found. Its main functions include:

• Perform an analysis of the current state of the hard drive;
• Search for bad sectors;
• Recovering deleted partitions;
• MFT fix;

Checking external hard drives;
In addition, the utility has a number of functions that are related to the recovery of deleted files.

Hitachi Drive Fitness Test

An excellent program designed to find and fix problems on drives. It is universal, since diagnostics of any drives can be carried out. With its help, you can very quickly find out the current position of the hard drive, as well as obtain additional information about it.
Includes:

• Quick but thorough check;
• Support for all components;
• Monitoring;
• Data statistics;

This utility is suitable for all devices and can even be used on a netbook.

Seagate Seatools for Windows

Used to check and test the status of the hard drive. She finds any problems and failures.

• The utility can fix:
• Equipment incompatibility;
• HDD file system violations;
• Errors in installed drivers;
• Viruses and malware that infect the file system;

In addition, it provides complete information about the media and all related indicators. According to the developers, this utility is incredibly effective at independently correcting minor problems, SSD and HDD errors, and is capable of completely restoring their functionality.

So, now you have complete information on how to determine whether your hard drive is working properly, and how to solve the problems associated with it yourself. Choose the option that suits you best or the one you like and act!

Video: checking the hard drive using standard tools