Which button on the keyboard turns on the sound? How to mute the keyboard sound on Android

Instructions for troubleshooting sound problems on your computer.

Why might there be no sound on my computer? How to correct this annoying misunderstanding? Sometimes the user can adjust the sound on the computer from the keyboard, but if the sound disappears, then there is no point in pressing the keys. First you need to find out the cause of the problem and then fix it. Here are common reasons why sound may disappear on your computer.

Malfunction of speakers or headphones
Audio settings are not configured correctly
The sound card or motherboard is faulty
Software crashes due to viruses
Incompatible applications or drivers are installed

Below are 7-point instructions for troubleshooting the problem for Windows Vista, 7 and XP operating systems.

Step 1: Check the volume controls

Find the speaker icon in the lower right corner of your monitor. If the icon is not displayed (as in Windows XP), go to settings - control panel - section “Sounds and audio devices” (more details in point 4 about Windows XP). By clicking on the icon, make sure that the volume slider is not all the way down, and also that the sound is not muted. Sometimes there is a volume button on the keyboard.

Call up the context menu with the right mouse button and open “Volume Mixer”. In the dialog box, check that all controls are enabled. If the controls are active, you need to turn them on.

If nothing can be done in these settings and the sound does not appear, everything is grayed out (the parameters are deactivated), then move on to the next point: checking the audio device for functionality in the task manager (step 3). If there are problems there, you need to reinstall the audio driver (step 6).

Step 2: Physically connect the audio output

Before checking the settings and condition of the sound card, make sure that the speakers (or headphones) are connected correctly and that they (the speakers) are turned on. On an audio card, the speaker connector is usually marked green.

If your computer has more than one sound card, make sure that the speakers are connected to the connector of the working card (which is used by the system). Check to see if the wire connecting the speakers and the system unit has come loose.

If possible, test the speakers on another computer or connect another audio device to the audio output and check the sound.

You can also check to see if you accidentally pressed the mute/unmute button on your keyboard. Some computer keyboards have this button.

Step 3. Checking the sound card is working

To enter the “Device Manager” dialog box, click:

In Windows7 and Windows Vista

Start -> Settings -> Control Panel -> Device Manager.

On WindowsXP

Go to the context menu “My Computer”, “Properties”. Next, find the “Hardware” tab and click “Device Manager.”

Your computer's audio device is displayed in the Sound, Video and Game Devices icon.

If the device driver is damaged or missing, the device icon will not be displayed, it is not defined, or there is an exclamation mark next to it. In this case, the driver must be updated or restored completely (step 6).

Step 4: Check your audio settings

You can check the audio settings on your computer using the Audio Settings window. In Windows 7 or Vista, to open the audio settings window, you need to select the Sound icon in the Control Panel, in the Settings section of the START menu. By the way, the Start button can also be on the keyboard, and with its help you can immediately enter the menu without using the mouse.

In the dialog box you will see a list of devices on your computer. In our example, this is only one device, set by default:

If the device is working correctly, then next to the icon there is a green checkmark and the inscription “working”.

If something else is visible, and there are some problems with the device, you need to reinstall the driver (step 6).

For Windows XP:

You need to enable “Sounds and audio devices” in the Control Panel. (Setting in the START menu)

Make sure the device is recognized correctly on your computer and is installed by default. To do this, go to the Audio tab, in the audio playback section.

Go to the "Volume" tab. Uncheck the “Mute sound” checkbox if it is there. You also need to make sure that the mixer volume is set above zero.

If all the settings in this section are correct, you can move on to the next step.

If your sound driver has crashed or your sound card is faulty, then the mixer volume control cannot be moved, and in place of the name of the audio device you will see a message about the absence of sound devices (step 6).

Step 5: Check the Windows Audio service

Go to Services - Administration - Control Panel - Settings - Start

(or through the command line: on the keyboard Start, then “Run”, in the command line type the command services.msc on the keyboard. Click OK.

In the window that appears, find the “Windows Audio” section.

If the service operates in automatic mode, you can proceed to the next step.

Otherwise, if the service is disabled, you need to enable it. From the service's context menu, select "properties".

In the Properties dialog box, do the following:

Enable startup type "Auto"
For Windows7, Vista, click the “Run” button; for Windows XP, the “Start” button
Click “Apply” and “OK”;

If it doesn't help, move on to the next step.

Step 6: Reinstall the audio device driver.

If there are problems in the audio settings window or in the device manager, there are signs that indicate that the sound device on the computer is not working correctly, then this most likely means that the sound driver is not working correctly or that it is damaged. In this case, the driver must be reinstalled or updated.

This can be done using the sound card driver file. It can be on a disk, included with the card, or along with drivers for the motherboard if the sound card is integrated into the motherboard. A disk containing motherboard drivers is included with the purchase of your computer. You need to pay attention to whether the drivers are suitable for your operating system. If the drivers are for Windows XP and you have Windows 7, you need to download the necessary files from the motherboard manufacturer's website. Unlike Windows 7, on Windows XP in most cases you will need to install drivers manually.

In the future, we will assume that the computer has a complete package of all drivers.

You need to go to the “Device Manager” (located in the “Hardware” tab, “System” window in the Control Panel) and remove the current audio driver. Or find “Multimedia Audio Controller” on your computer if there is no audio driver. Also clean (remove) all audio codecs on your computer. This can be done through the “Add or Remove Programs” section, Control Panel. Then restart the system. When working with Windows 7, the system will update all missing drivers automatically, using Plug and Play technology.

If you chose to install manually, then you need to insert the disk with the drivers into the drive.

Apart from minor visual differences in the dialog box, the driver installation process is the same in all versions of Windows (7, Vista and XP). We will look at the process of installing the driver on the XP operating system.

So, in the device manager window you need to find the “sound” or “multimedia” section. Double click to open properties. In the “Driver” tab, click the “Update” button. Answer the system’s question about the installation method: automatically or manually. Select manual installation and click Next.

In the dialog box, check the “Include next search location” checkbox and use the “browse” button to point to the drive. Click “Next” and the computer will search for the driver and install it. If the mouse does not work, and this can happen, you can complete the entire driver installation using the keyboard.

The system will notify you that the driver is installed and the system is ready for operation. The sound will be heard immediately or after the system is restarted. If none of the above still helps, you need to check the operation of the speakers again and proceed to step 7.

Step 7: Check BIOS settings

Incorrect BIOS settings can cause loss of sound. In the BIOS shell you will also have to operate only with the keyboard all the time, since the mouse is disabled in this mode. The integrated audio card can be disabled in the BIOS. You need to press the DEL button before the system boots (immediately after the computer starts). On some machines these are the F2, F12 or F10 keys. Make sure the switch is set to “Enabled” next to the motherboard in the BOIS device list. You need to turn on the audio card if the switch is set to “Disabled”.

And naturally, the reason for the lack of sound may be a mechanical malfunction of the sound card. Try all the above methods before purchasing a new card.

Let me remind you that the sound on your computer can be adjusted using the keyboard using the F11, F12 keys.

I hope that the sound problem is completely solved by the simple instructions described in this article. If you still cannot restore the sound, contact a specialist for help.

The laptop was created for the convenience of its owners. Having it, you can use a personal computer anywhere and at any time. Every year manufacturers produce more compact models. However, sometimes you have to pay for compactness by the absence of some keys on the laptop keyboard. If there is no volume button, then this fact can lead an inexperienced user to a dead end. Where and how to turn on sound in a laptop is a question that has worried more than one buyer of this equipment. How to turn on sound on a laptop On older laptops, the volume button is located directly on the keyboard. It can be designated “Vol” or “+” and “-”. By clicking on “+”, you can turn on or turn up the sound on your laptop. Similar keys can be located on the side, not far from the slots for flash drives. If your laptop model does not have volume keys, you can turn it on using the mouse or touchscreen. At the bottom of the screen on the left side there is a speaker icon. By clicking on it, you can adjust the volume. When the volume is muted, a red circle with a line through it appears next to the icon. sound control buttons How to turn up the volume on a laptop using the keyboard One of the surest ways to turn the volume on and off will be the function keys. On the right side of the keyboard at the bottom is the Fn key. And among the “F” keys you can find “hot” keys that you can use to adjust the sound. These keys have volume up and down icons. To use them, you need to hold down the Fn key and press the desired volume down or up key. If necessary, you can turn off the sound on your laptop using these keys. function buttons Installing and reinstalling the driver if the sound on the laptop is not working It may happen that the sound device drivers on your laptop are not working correctly or have crashed. To check this, go to the device manager and see if there is a yellow circle next to the “Sound devices” item. To access the device manager, go to the control panel and type the word “manager” into the search bar, after which the operating system will offer you the device manager. Go to Device Manager and update your drivers. In most cases, this helps to configure the sound, but if it does not appear after the update, then try removing all sound devices from the operating system. Then restart the laptop and the system itself should update the required drivers. Often, after such manipulations, sound should appear. Also, if there is no sound on the laptop, you can check the Windows Audio service, it must be turned on. You can find it by going to “Start”, selecting “Control Panel”. Next, go to “Administration” and select “Services”. We look for Windows Audio from the list; if this service is disabled, then enable it by setting the startup type to automatic. Sometimes it is completely impossible to find the cause of the malfunction. In such a situation, many users completely reinstall the operating system. Then the drivers are installed on the sound card. If after this the problem is not resolved, you need to purchase a separate sound card for the laptop and install it. If the methods listed above do not suit you, then you should seek help from a qualified specialist who can find the problem and fix it.

How to turn on sound on a laptop

On older laptops, the volume button is located directly on the keyboard. It can be designated “Vol” or “+” and “-”. By clicking on “+”, you can turn on or turn up the sound on your laptop. Similar keys can be located on the side, not far from the slots for flash drives.

If your laptop model does not have volume keys, you can turn it on using the mouse or touchscreen. At the bottom of the screen on the left side there is a speaker icon. By clicking on it, you can adjust the volume. When the volume is muted, a red circle with a line through it appears next to the icon.

How to increase sound on a laptop using the keyboard

One of the surest ways to turn the volume on and off will be the function keys. On the right side of the keyboard at the bottom is the Fn key. And among the “F” keys you can find “hot” keys that you can use to adjust the sound. These keys have volume up and down icons. To use them, you need to hold down the Fn key and press the desired volume down or up key. If necessary, you can turn off the sound on your laptop using these keys.

Installing and reinstalling the driver if the sound does not work on the laptop

It may happen that the sound device drivers on your laptop are not working correctly or have crashed. To check this, go to the device manager and see if there is a yellow circle next to the “Sound devices” item. To access the device manager, go to the control panel and type the word “manager” into the search bar, after which the operating system will offer you the device manager.

Go to Device Manager and update your drivers. In most cases, this helps to configure the sound, but if it does not appear after the update, then try removing all sound devices from the operating system. Then restart the laptop and the system itself should update the required drivers. Often, after such manipulations, sound should appear.

Also, if there is no sound on the laptop, you can check the Windows Audio service, it must be turned on. You can find it by going to “Start”, selecting “Control Panel”. Next, go to “Administration” and select “Services”. We look for Windows Audio from the list; if this service is disabled, then enable it by setting the startup type to automatic.

Sometimes it is completely impossible to find the cause of the malfunction. In such a situation, many users completely reinstall the operating system. Then the drivers are installed on the sound card. If after this the problem is not resolved, you need to purchase a separate sound card for the laptop and install it.

If the methods listed above do not suit you, then you should seek help from a qualified specialist who can find the problem and fix it.

Home " Personalize Windows

How to enable or disable keyboard sounds?

How can I turn off keyboard sounds when pressing the Caps Lock, Num Lock or Scroll Lock buttons?

The Windows operating system has special features that make working on a computer more convenient. One of these functions sounds when pressing special switch buttons. This function helps a person understand whether you turned the switch on or off. This result is achieved very simply: the sound when turned on is different from the sound when turned off. These keyboard sounds are very convenient to use, but perhaps someone will want to turn off the keyboard sounds because they interfere with concentration, while others, on the contrary, will want to turn on the keyboard sounds. In any case, you have come to the right place.

Switch buttons that make sound

The switch buttons, after pressing which you can hear the sounds of the keyboard, include three buttons, each of which has the word in its name Lock:

Caps Lock. If this button is turned on, then everything you write will be displayed in capital letters. To switch to lowercase letters, you need to turn off this function.
Scrool Lock. This mode is used very rarely. And this very mode does not have any specific purpose and depends on the software in which this button will be used.
Num Lock. In the on mode, the numeric keypad is activated, which is located on the right side of the keyboard. Accordingly, when turned off, the right numeric keypad does not work. When disabled, these keys can perform other functions that may vary from keyboard to keyboard.

Disable keyboard sounds when pressing * Lock buttons

To turn off the sound warning when you press a button Caps Lock, Scroll Lock or Num Lock, You need to Control panels open the window Special abilities. Next you need to go to the window Changing keyboard settings. In the last window you need to uncheck the box next to the item Enable voiceover for switches. If you uncheck the box next to this item, you will turn off all keyboard sounds and you will be happy.

How to enable keyboard sounds

The process of turning on the voicing of switches is completely similar to the process of disabling the voicing described above. The only difference is that you need to check the box next to the item Enable voice switches, to enable keyboard sounds.

These very simple actions can easily manipulate the presence or absence of keyboard sound when you press the Caps Lock, Scrool Lock or Num Lock buttons.

A beep is a great way to let the user know that an action has been performed. However, by default, the Android operating system produces too many beeps. This happens not only when there is an incoming call or SMS message, but also when the user interacts with the device. For example, sound appears when typing text or a phone number. Many users do not like this constantly beeping phone sound, and they tend to turn off the keyboard sound.

If you want to turn off the sound when typing on the Android keyboard, then you need to open the Android settings and go to the “Language and input” section, which is located in the “Personal data” settings block.

After this, you will see a list of keyboards installed on your Android device. Select the keyboard you use for typing.

And go to the settings of the selected keyboard.

In the keyboard settings you can change a lot of different parameters. Among other things, options will be available here to turn off vibration and keyboard sound.

To turn off the sound when typing on the keyboard, move the corresponding switch to the “Off” position and exit the Android settings. After that, open any application and check if the sound appears when typing.

Mute when dialing a number

It should be noted that the instructions described above apply only to the keyboard for typing. If you want to turn off the sound that appears when you dial a number, you can do this through the Contacts application. Open this application and go to settings.