How to put minus the first degree in Word. How to insert a square to fill in in Word. How to put a degree in Word. Simple ways. Using a superscript

How to put emphasis in Word is a fairly popular question for users of this program. Unfortunately, not everyone knows how to do this correctly, especially beginners. And now, we will look at how simply this can be done.

Is it necessary to set emphasis in Word?

Hello, friends! Almost all computers have the Microsoft Word text editor of different versions installed. But you need to be able to use them in order to achieve any goals. For example, write an article, a book, set a symbol in the text, and so on.

Sometimes, when writing any information, you have to put emphasis in Word, thereby making it clear to readers how to correctly read this or that word. Some phrases are similar in meaning. And you have to rely on the accent symbol, which determines the normal readability of the word. In the future, you will learn how to add emphasis in Word.

In fact, there are three ways to help you place an accent mark on a letter. Using them, you can register this symbol using various methods. Below, all the options will be demonstrated to help you do this correctly.

Method 1. Set the emphasis in Word using the key combination “Alt” and 769

So let's look at the first method of setting accent. For example, let's take an arbitrary word - directory. Some people don't know how to read it correctly. But the main emphasis is based on the consonant o, which means the symbol must be placed above this letter. (Picture 1).

To set the accent, use a combination of keys that are on your computer keyboard. ALT+769. In order for this symbol to appear, hold down the ALT button and then, without releasing your finger, write the following numbers - 769 in the side number field. After that, remove your hands from the keyboard. Subsequently, the accent symbol appears.

Method 2. Set the emphasis in Word using the key combination “Alt+X”

This method of setting emphasis is also quite simple. There is another symbol 0341, and along with it another code works - 0301. You need to write it next to the letter o, but before that, hold down the ALT + X keys simultaneously. When you do everything, you will see a message window - a place for the symbol . Just press Enter and the accent will appear above the letter.

Method 3. Set the accent in Word through the “Character” menu

In this case, you will have to set the accent in Word through the menu - symbol. To do this, open a Word document, go to the Control Panel tab - Insert. Notice that the Symbol function appears on the right side. That's what we need. Open this function and select other symbols. Then, in the character code tab, write 0341. This digital code indicates the accent of the character. (Figure 2).

Next, it will appear as a blue square. Click on it to display the accent. So, today you learned how to put emphasis in Word using three methods. All the details can be found in this video.

When working in Word, one day you will have to face the need to add an accent mark. You can, of course, highlight the stressed vowel in bold, but in an official document such a highlight will look somewhat... frivolous. Why resort to amateur means if you can approach the matter professionally and, most importantly, carry out this action easily. By the way, stress is also used when writing foreign words (for example, in French).

Instructions for Word 2010

Putting emphasis in Word 2007

TURN ON SUBTITLES if you want to see the Russian description!

• If you need to place an accent symbol tilted to the left, then place the cursor after the accent letter, type 0300 on the keyboard without a space, and press the combination “Alt+x”. Tilt to the right is done by entering 0301, and the same combination “Alt+x”. By the way, if you want to learn how to touch-type, then here.
• If the above manipulations do not work, or you do not fully understand the specifics of the input, you can proceed as follows: place the cursor after the letter. Select the “Insert” section, the “Symbol” subsection - “Other symbols”. Find the required accent symbol and click “Insert”. Ready!

How to add emphasis in Word 2003

TURN ON SUBTITLES if you want to see the Russian description!
Here everything is about the same or even simpler, judge for yourself:

• Place the cursor after the letter. On the top panel, click “Insert” - “Symbol”.
• Select the accent symbol. We confirm.

By the way, in order to find a symbol faster, it is recommended to set the font field in the “Symbols” tab to “plain text”, the “combined diac” set (for version 2007) or “area of ​​personal use” (for version 2003).

Remember that the combination 0300 “Alt+x”, 0301 “Alt+x” works (with some skill).
Conquer Word and see you again!

The Word text editor has features that not everyone needs. Take, for example, such a function as the accent mark in Word. But it was not in vain that it was programmed. So someone needs it. So I decided to describe it too. Let there be a complete set.

There is no person who has never seen or worked with the Word text editor. But even those who work a lot in it are not even aware of some of its functions.

How to put an accent mark inWord

We write the text. Now we choose the word in which we should have emphasis. Place the cursor behind the letter over which you want to place an accent, and in the menu Insert select an item Symbol(V Word 2003).

IN Word 2007/2010 – Insert – Symbol – Other characters…

In the table that opens, set the Symbol on the tab of the same name Font – (plain text) , Kit – Area of ​​personal application , select sign « Accent » , click the button below Insert, then the button Close .

IN Word2007/2010 in the same table we do the same thing, only in the field Kit install Combined diac.marks .

For those who are not new to this page:

For everyone else

At the beginning of the article about the variety, the name of the violet is indicated with an accent. There are several ways to highlight a stressed vowel using a computer. You can insert stressed vowels not only in articles about varieties, but also in ordinary discussions, when you want to tell readers the correct stress:

“Makuni wrote a lot to his customers, asking about how his varieties bloomed. There was no Internet then, and long-distance conversations were expensive.

Bold stressed vowel

Select the accent letter with the mouse and press the "F" button ("Bold", second from the left in the first row). It will turn out like this:

SK-Afrod And ta (SK- A phrodite), S. Kuznetsov, semi-mini

This method is recommended when initially creating an article so as not to waste time inserting an accent mark over vowels. Later, one of the advanced authors will replace the emphasis through bold font with normal emphasis through the accent mark in one of the following ways.

Copying ready-made vowels with stress

Go to the variety page, click on the “Edit” tab to get into article editing mode

After this, one by one, change all the stressed vowels to stressed vowels. The sequence of actions for replacing one letter looks like this. Below, use your mouse to select the appropriate vowel with stress:

Latin: ÁÉÍÓÚÝ áéíóúý Russian: АЭИООУУИИУЯЯ aeeeeeeeeeeee

• press CTRL+C (Latin) on your keyboard at the same time to copy the highlighted stressed vowel to the clipboard
• go to the editing window for the article about the variety
• Use your mouse to highlight the vowel you are going to replace
• if it is already highlighted in bold, click the "F" button (second in the first row) to deselect it
• press the Delete key on your keyboard to delete the previous stressed vowel
• click the editor button "Insert text only" (the very last one in the first row of message editor buttons)
• a window will appear. Press CTRL+V (Latin) on your keyboard at the same time to paste the stressed vowel stored in the clipboard
• click "OK" button to complete the insertion process
• a stressed vowel should appear in the word.

Repeat these steps for the remaining stressed vowels.

It will look something like this:

SK-Áphrodite, A. Kuznetsov, semi-mini

Potential Difficulties

Inserting via the text insert button

Paste the copied stressed vowel only through the "Paste text only" button. Otherwise, paste together with the letter its design in the article from which you copied it.

Strictly adhere to only the Latin alphabet or only the Cyrillic alphabet

Make sure that Latin stressed vowels are replaced with stressed vowels from the Latin list, and Cyrillic vowels - from the list of Cyrillic vowels. Latin and Russian stressed "a" are completely different letters.

• the name "Oblachny Vostórg" with Latin accents will appear at the very beginning of the list of domestic varieties, since for the sorting program this Russian-language name begins with the Latin letter "O"
• search engines, when requesting the name "Cloud Delight", written entirely in Russian letters, will not find a registry entry where this variety begins with the Latin letter "O"
• when creating catalogs of varieties divided by the first letter, a domestic variety with the first Latin accent letter can only be found in the subdirectory dedicated to the Latin letter "O"
• The spell checker will highlight Russian words with stressed Latin vowels as incorrect
• when someone copies information from a registry entry, the erroneous Russian name with a Latin letter will continue to spread throughout the violet world

Insert special character button

In the message editor there is a button “Insert a special character” (to the left of the orange emoticon button in the first row). By clicking on this button, a window with special characters appears. There you can find and select the desired Latin vowel with an accent mark, large or small.

But this method is only suitable for Latin drums. I will repeat the above prohibition on inserting Latin stressed vowels into Russian names.

Accent using the Alt key

In this layout, you can easily enter an accent mark. It is enough to place the cursor after the stressed vowel and simultaneously press the combination Alt (graphic, on the right side of the keyboard) + Shift + "/" 2-3 times.

In addition to entering an accent, Ilya Birman’s layout allows you to enter many useful typographic design marks through a regular keyboard:

• "herringbone quotes"
• em dash -

However, all these characters are available in our message editor by clicking the "Insert special character" button, to the left of the orange emoticon button.

In the Russian language there is a group of words that have the same spelling, but change their meaning depending on where the stress is placed. They are called homographs. Despite the fact that the surrounding text most often serves as a hint for choosing the correct meaning of the homograph and the appropriate placement of stress in it, it will nevertheless be better if the author of the text himself takes care of his readers in advance and indicates the stressed vowel in the word. Let's look at how to do this in the Word text editor.

There are two main ways to place emphasis on a letter in Word.

1. Place the cursor behind the vowel letter in the word over which you want to place the accent. In the main menu of the editor, go to the “Insert” section, in which find the “Symbols” group and click the “Symbol” button. In the window that appears, left-click on the line “Other symbols...”.
   In the character selection window that opens, in the “Set:” field, select “combined diacrs” from the list. signs."

   

   
   The usual accent, directed from the upper right corner to the lower left, will correspond to the sign code 0301. The sign with code 0300 will represent an accent directed in the opposite direction.

   

   
   Select the appropriate character and click the “Insert” button. As a result of this action, an accent mark will appear above the letter behind which the cursor is placed.

   

   
   After this, the window with character sets can be closed.
   
2. The second method of placing emphasis on a letter in a word in Word is a variation of the first method and a window with sets of special characters contains a hint about its use. It states that this character can be set by a keystroke combination consisting of typing the character code and then pressing the combination Alt+X.

   

   
   In practice it looks like this. After the stressed vowel, write the code for the accent symbol: 0300 or 0301 .