How to find out the network card model? The easy way. What is a network card, and why is it needed in a computer, laptop, and how does it work? How to find out which network card is on my computer, laptop: methods. How to choose the right network card for

Instructions

Open the Computer Management window. To do this, click on “Administrative Tools” in the “Control Panel” applet. Go to Device Manager. Click on the plus sign next to the “Network cards” line. A list of all installed network cards will open.

You can quickly get information about the model and manufacturer using Device ID and Vendor ID on the website www.Pcidatabase.com. To do this, enter the received values ​​in the appropriate fields.

Video on the topic

A network card is a device that connects a computer to a network; it is also called a network interface card. Several of them can be installed on a computer. All of them can be viewed in Device Manager.

Instructions

Right-click on the “Computer” icon and select “Properties”. The “System” window will open in front of you.

The Device Manager will open in front of you; it allows you to view everything installed on the equipment and configure its properties. Find the line “Network adapters” and click “+” opposite it; all network computers will appear in the expanded list.

Helpful advice

To view all the information about your computer, it is convenient to use specialized software, such as SiSoft Sandra.

After reinstalling Windows, it often becomes necessary to install an additional driver on a separate device. Operating systems provide drivers for only a small portion of computer hardware, and some devices require newer drivers than those originally installed. One such device is a network card. It is quite difficult to determine the card model - the board itself does not have clear indications of the model name.

You will need

• A computer with Internet access.

Instructions

Log in to Task Manager. To do this, right-click on the My Computer icon, select Task Manager in the context menu, and left-click on it. A window will open containing a list of all devices installed on the PC, grouped into semantic categories.

If the card model is a computer, then it will be considered an unidentified device and will have an icon in the form of a yellow question mark. It is usually called an Ethernet controller and is located in the network devices group.

Right-click on the network card icon. In the context menu that appears, click Properties to open a window with device information. It will list information about the device driver, its manufacturer, the resources it uses, and its physical connection to the computer systems. The model of the network card will also be indicated here, if the system was able to detect it. Otherwise, continue with the steps below.

Click the Details tab at the top of the device properties window. Click the drop-down list at the top of the window to open it and select the item containing the device instance code. At the bottom of the window, a set of letters, numbers and special characters will appear that identify this particular network card.

Copy the code by pressing the Ctrl + C key combination and save it. You will need it to search for a driver for the network card of the installed model. You should enter the received code into any search engine - in its output you will definitely find an indication of the driver for the network card.

Download the driver and install it. After installation and reboot the system, go to the properties of the network card again. If the driver was installed correctly, the model of the network card will be indicated there.

Helpful advice

If you need to determine the model of a card on a laptop computer, it makes sense to search by its model - such devices have the same hard-coded set of equipment.

A network adapter or card is an integrated or optional peripheral device that allows a computer to create, connect, and communicate with wired and wireless networks. To find out its manufacturer and model, use one of the suggested methods.

Instructions

If your network is already installed in the computer, you can look at the warranty card or receipt, of course, provided that you have kept the original box from the device. The warranty card always indicates the full name of the manufacturer and model of the device.

If you are looking for the model of your network card or card, to download drivers for a pure version of Microsoft Windows that does not contain built-in device drivers, go to the network card manufacturer's website. Find the driver and software download page. Usually it is called Downloads, Drivers, etc. Most likely, the site will automatically detect your network card. If this does not happen, download all available drivers and try installing them through a driver update in Device Manager. There is also a possibility that when you connect to the Internet, the operating system itself will determine the model of the network card and load the necessary driver.

If the driver is already installed and you need to find out the manufacturer name and model number of the network card, go to the Windows Control Panel through the Start menu or the My Computer system folder and double-click the “Device Manager” shortcut, having first switched to the “Small” view icons" or "Large icons". In the Device Manager window that appears, find the “Network adapters” section and expand it with a single left-click. All network devices will be listed there, including Wi-Fi. Double-click the device name to view detailed information about it and the driver installed on it.

You can also open the case by carefully removing the network card (if it is not integrated) from the LAN slot and look at the label on the sticker in the corner of the network card.

Your computer, like any other, contains a large amount of equipment. It is almost impossible to find out the name of each of them without resorting to software methods.

You will need

• - a program for determining the computer configuration.

Instructions

In order to determine the model controller motherboard, open computer properties. In the window that appears, select the “Hardware” tab and launch Windows Device Manager. In the list of equipment that appears, find the controller you need and rewrite its name. A similar sequence applies to other devices, for example, video cards and sound adapters, modems and network cards, and so on.

Use a special program to view the equipment configuration. To do this, download the Astra utility or any other that is most convenient for you to use, install it, run it and view all available computer devices.

Also try to determine the type of computer controllers without installing third-party programs and using standard utilities of the Windows operating system. To do this, expand the Start menu list and open the Run item. Enter msinfo32 in the empty field. In the window that appears on the left side, select what type of controller it is - audio, sound adapters, and so on.

Opening the desired directories one by one in the folder tree on the left, find the controller you need and select it with the mouse button. View the information available about him on the right side of the window. If necessary, rewrite it or, best of all, save it in a text file for later quick access when searching.

To view your processor and RAM settings, go to the My Computer menu, right-click on an empty space, and view the configuration. Usually the type and model of the processor, its manufacturer and frequency are reflected there. Information about RAM is also displayed.

note

Be careful when choosing device drivers and always look for system information before installing them.

Sources:

• how to find out who the domain controller is in 2019

After installing the operating system, it is extremely important to select the necessary versions of working files for some devices. Most often, installing new drivers allows you to increase equipment productivity.

You will need

• - Sam Drivers;
• - Internet access.

Instructions

To search for network drivers cards Various methods can be used. First, try to find the necessary files by visiting the official website of the manufacturer of this equipment. If you are setting up a mobile computer, then it makes sense to visit the website of the developers of this device.

Download the found files. Using WinZip or its equivalent, extract them from the archive. Now press the “Start” key and right-click on “My Computer”. Go to PC properties.

Open the Device Manager menu and find the network adapter you need. Go to the properties of this device. Select the Drivers menu and click the Update button. In the next dialog menu, select “Install from a specified location.”

A network card, better known as a network card, is a device that allows a computer to communicate with other devices on the network. In most computers and laptops, the network card is already built into the motherboard, not only to reduce the cost of the device, but also for user convenience. Of course, you can use a separate network card.

Let's imagine a situation where the user reinstalled the operating system and now some of the devices do not work for the simple reason that the necessary drivers are missing. This can also happen with a network card. Therefore, in order to find out which driver is needed for the network card, you need to find out its name. I'll tell you about several ways that will allow you to do this in just a few clicks.

We look at the name through the device manager

The easiest way for the vast majority of users is to look at the name using, where you can see all the information about the equipment installed on the computer.

Find the “Computer” icon on your desktop (if it is missing, click on the “Start” key and look at the right side of the window that appears), right-click and select “Properties”. A window like this will appear:

Click on the "Device Manager" link. A window with installed devices will open. Select "Network adapters" and look at the installed network card model. There may be several of them. Remember also that here you can see additional devices for connecting to the Internet, including Bluetooth adapters.

Using the command line

You can use . It's very simple.

Click on the “Start” button and in the “Search programs and files” line (for Windows 7) write the three letters cmd and press the Enter key. This will bring up the command line.

We look at the specification of the motherboard

If you are using a built-in network card on your motherboard, then it may be easier for you to type the name of the motherboard into a search engine. This will help you find out the name of the device to download drivers. I already managed to talk about that on the computer some time ago.

Sometimes the name of the network card can be found on the motherboard box, of course, if you assembled the system unit yourself.

Alternatively, you can look at what is written on the network card itself. To do this, however, you will have to open the cover of the system unit and take a look at the device. Of course, we are only talking about a third-party network card, not a built-in one. If you decide to use this method, first turn off the computer and unplug the cord from the outlet.

Third party programs

Of course, you can use third-party programs that show the specifications of your device.

One of the most popular programs of this kind is Everest. Paid, but allows you to use the first month for free. Of course, you can use a free analogue.

Download the program, install it on your computer, launch it and find the information you need.

I hope these four methods will be enough for you to find out the model of your network card.

Description of network cards for computers and laptops.

Navigation

A network card is a device that allows users to access the Internet, as well as a local network from a computer or laptop. As a rule, modern network adapters have an Ethernet connector to which an Internet cable is connected. This could be a fiber optic cable coming from a Wi-Fi device or modem.

In addition, there are also wireless network adapters if the user does not have the ability or desire to run cables across the entire apartment.

In today's review we will discuss in more detail what network cards are, what they are needed for and how they work.

Network cards

As already noted, network cards are a necessary component of a computer or laptop that allows us to work on the Internet. Network cards may differ from each other in bandwidth, type and other parameters.

What types of network cards are there?

Here we list the main types of network cards:

• Wireless cards are cards that provide a connection to the Internet using Wi-Fi or Bluetooth devices.
• External – usually used for external connection to laptops via a USB port
• Integrated - the most common cards that are built into computers and laptops by default.
• Internal are network cards that can be additionally connected to computers in the corresponding slots on the motherboard.

How do network cards work?

We will not delve too deeply into the operating principle of network cards, since this information will be more understandable only to specialists. Let's explain it more simply. Let's say if you installed fiber optics at home and paid for the Internet, then your provider gives you access to the World Wide Web.

Digital information is transmitted through the fiber optic cable, which is then processed by the network card. There is nothing complicated about it. When you buy a computer or laptop, as a rule, these devices should already have a built-in network card on the motherboard. The driver for it comes along with the drivers for the motherboard. You only need to install the drivers from the disk, which must be given to you by the seller of your computer/laptop.

All this is so simple that most users simply do not realize that there is a network card on their computer. They connect the cable to the network unit of the PC or laptop, pay for the services of their provider and freely use the Internet.

As you might already guess, the computer’s network card is located in its system unit. You just need to open its side cover and pay attention to the lower left corner. You can see this in the screenshot:

How to find a network card on a computer?

If you want to buy a separate internal network card, then you can build it into the corresponding slot in the lower left area of ​​the system unit.

The network card looks like this:

How to find a network card on a computer?

To find out what card you have, you don’t have to go into the system unit. The relevant information can be scouted in a systematic way. To do this, it is not necessary to install third-party programs, just use the “ Windows».

• Go to " Control Panel» via menu « Start»

How can I find out which network card is installed on my computer?

• Next, go to “ System»

How can I find out which network card is installed on my computer?

• Then go to " device Manager»

How can I find out which network card is installed on my computer?

• In the new window, find the item “ Network adapters" and click on it

How can I find out which network card is installed on my computer?

How much does a network card cost?

It's hard to say how much a network card will cost tomorrow, since prices for digital devices can constantly change. Different network cards have different prices, let's present some list for today:

How much does a network card cost?

How to choose the right network cards for laptops and computers?

When purchasing a card, of course, you should pay attention to parameters such as media type, bandwidth, and type of network card. It is important to know the classification. But, if you are not an expert, you can find out this information from the seller (buy digital equipment only in well-known official stores). The most important thing is to know in advance which network card from which company you should look for.

Let's list what you need to know when choosing a network card:

• The most famous top manufacturers of network cards: “ D-Link», « Tp-link», « Gembird», « Acorp».
• The network card must have connectors or a connector to be able to connect to a local network (be sure to ask the seller about this).
• To connect to computers, the network card must have a connector " PCI" (especially if you have an old computer), and for computers - the " PCMCIA».
• It is also important to consider what maximum Internet speed your network card can provide. Standard cards support speeds of up to 100 Mb per second.

Video: How to change the network card?

A network card or network adapter is needed to create a local network, with which you can connect several computers to each other, as well as to connect your computer to the Internet. Sometimes the card starts to work incorrectly, but you can restore it yourself using standard Windows 7 tools.

When to configure the adapter manually

You need to update drivers or change card settings if you have problems connecting to the local network or connecting to the Internet. Please note that such problems are not always caused by the network adapter, but sometimes it is because of it that errors occur that block access to the network.

How to find out the adapter model

The first thing to do is check whether the card is connected to the computer and whether it is recognized by it. The adapter is included with all laptops and computers by default, so if you didn’t assemble your device piece by piece yourself, you shouldn’t think about its absence. But there are times when the wires going to it become disconnected or come off.

A network card (or network adapter) is a device that allows a computer to communicate with other devices. On modern PCs and laptops, the components of this device are integrated into the motherboard.

You will need to open the computer case and check this only if the network card is not displayed in the “Device Manager”:

Card activation

If the network card is connected but not enabled, it must be enabled manually. There are several ways to do this. If the card is not damaged, turning it on will not cause errors.

Via "Device Manager"

The previous section described how to view the card model through the “Device Manager”. Find the adapter you need and right-click on it and select the “Enable” function. If the card is successfully turned on, the down arrow icon will disappear from its icon.

Click on the “Enable” button in the “Device Manager”

Using the Control Panel

1. Using the Start menu or any other method, launch the Control Panel on your computer. Open the “Control Panel”
2. Go to Network and Sharing Center.
   Go to “Network and Sharing Center”
3. Click on the sub-item “Change adapter settings”.
   Click on the sub-item “Change adapter settings”
4. A list will open, which will most likely contain several cards. One serves as a connection to the wireless network, and the other serves as a connection to the wireless network. There may be additional adapters in the list. Select the one you need and right-click on it and select the “Enable” function. Wait until activation is complete: the red cross icon on the card icon should disappear.
   Click on the “Enable” button to activate the adapter

Via BIOS

If the card cannot be activated using the previous two methods, then perhaps this can be done through the BIOS settings.

1. Entering the BIOS is done using the Delete key, which must be pressed while turning on the computer. Perhaps the key that activates the BIOS will be different: this will be indicated in the hint that appears in one of the corners of the screen when the logo appears.
   If you find out the model of your motherboard, you can find on the Internet the button responsible for entering the BIOS.
2. Enter the BIOS by pressing the Delete key
   The design and location of BIOS items and sections may differ depending on its version and motherboard model, but the following algorithm of actions is approximately the same for all versions. Go to the "Advanced" tab.
3. Open the “Advanced” tab
   Go to the “Onboard Devices Configuration” subsection.
4. Open the subsection “Onboard Devices Configuration”
   To enable the card, set the “Onboard Lan” line to “Enabled”. "Disabled" means the card is disabled.

Set the “Enabled” parameter for the “Onboard Lan” line

Video: how to enable a network card in Windows 7

You can disable an extra card using the same methods that allowed you to enable it: through the “Device Manager”, “Control Panel” and BIOS. Only in the last step of the method through the “Device Manager” you need to click the “Disable” or “Delete” button, in the “Control Panel” click the “Disable” button, and in the BIOS change the value from “Enabled” to “Disabled”.

Disable the card through the “Control Panel”

Drivers are necessary so that the card does not conflict with other components and fully performs all its functions. Usually they are installed automatically when you first connect the computer adapter, but sometimes the drivers fail or become outdated. In both cases, you need to reinstall them yourself. This is done through the “Device Manager”.

Automatic update

The positive side of this method is that you will not need to search for drivers manually, the negative side is that you will need an Internet connection, which may not be available if the network card does not work. But if you have the opportunity to connect to the network, you can update the drivers in the following way:

Manual update

The advantage of this method is that you can download the card drivers manually from another computer that has Internet access, and then transfer them to yours and install them. It is recommended to download card drivers strictly from the official website of the company that created it.

What to do if drivers are not installed

If at any stage errors occur that prevent you from installing drivers, you must remove the adapter from Device Manager and restart the computer.

Removing the card from the “Task Manager”

After the reboot, open the list of connected devices again, and in it there is the “Other devices” sub-item. It will contain the “Network Controller”, which is your card. Install drivers on it using one of the methods described above.

The network controller is located in the “Other devices” sub-item

Video: how to update the network driver

View map options

If you want to find out the physical address, IPv4 parameters, gateway address and other possible information about the adapter, then follow these steps:

Additional method

You can also find out the card parameters through the “Command Line” using the “ipconfig /all” command. “Command Prompt” can be found by going to “Start” - “Accessories” - “Command Prompt”. Running this command brings up information about all physical and virtual adapters recognized by the computer.

Run the command “ipconfig /all” to obtain information

How to change card settings

The previous paragraph described how to view information about the network adapter. But you can not only see it, but also change it by following these steps:

Video: how to configure a network card

Updating the network card

The only way to update a network card is to install more recent drivers on it, in which the developers have corrected some previously made errors. New drivers are installed directly on top of the already installed ones. If you cannot install on top, you should remove the device, restart the computer and repeat the procedure. How to do this is described in the section “Updating and installing drivers.”

Can I use two cards?

Two network cards can work simultaneously and relieve each other if one of them is aimed at working with Internet traffic, and the second is aimed at working with a local network. To do this, you need to correctly set the IP, DNS and router parameters for both adapters.

Resetting the adapter

You can reset the adapter settings, namely TCP/IP and DNS, using standard Windows tools or using a third-party program from Microsoft. Conditions under which a reset must be performed:

• Internet connection speed is low or unstable;
• files are downloaded broken, this happens due to the same instability of the Internet;
• When connected, the Internet works fully, but after a few minutes problems begin;
• Manually changing the adapter settings led to other problems with the Internet.

Standard method

Launch “Command Prompt” by going to “Start” - “Accessories” - “Command Prompt”, and enter the commands “netsh int ip reset c:\resetlog.txt”, “netsh int tcp reset” and “netsh winsock reset” which will perform a factory reset. Done, the registry branches and system files will see changes, and you may need to restart the computer.

Execute the commands “netsh int ip reset c:\resetlog.txt”, “netsh int tcp reset” and “netsh winsock reset” in the “Command Line”

Through a third party program

You can download the NetShell program from Microsoft, which does not require installation, from their official website. Once you launch it, follow the instructions that appear on the screen to reset all changed settings.

Download the program to automatically reset the card settings

Solving adapter related errors

During setup or use of the adapter, the errors described below may occur, which will prevent you from using the Internet or local network. Most of them can be fixed without replacing the card.

The card does not have valid IP settings

You may encounter a similar error when setting IP parameters or scanning a network module using standard Windows tools designed to automatically resolve errors.

Manually obtaining settings

If you have not changed the settings of the adapter, that is, it obtains an IP address automatically, then manually requesting an IP address may fix the problem:

Reset

Resetting settings to default values ​​is the most reliable way. How to do this in several ways is described in the “Resetting the adapter settings” section.

Manual adapter configuration

If the previous methods did not help, you should try setting the settings yourself:

Error "This device cannot start"

This error appears in the “Device Manager” not only with the adapter, but also with other connected devices, and has code 10. To fix it, you need to update the card drivers. How to do this is described in the “Updating and installing drivers” section.

The adapter does not work, does not install, or does not appear

If the adapter does not work, does not install or is not displayed, then the reasons may be the following:

Changed map settings disappear

If, after you close the window with the changed settings or restart the computer, all the changes you made disappear as if you never made them, then there are two ways to solve this problem: set the settings by running commands and change the incorrect values ​​in the registry.

Making changes via the Command Line

Launch “Command Prompt” with administrator rights and sequentially execute the following two commands: “route delete 10.0.0.0” and “route -p add 0.0.0.0 mask 0.0.0.0 X”, in the second command “X” is the IP of your router, which usually looks like "192.168.0.1", but in your case it may have a different meaning.

Changing registry settings

A network adapter is needed to connect to the Internet and other computers. If it does not work or is not displayed, check its connection to the computer with wires, and then the status of its drivers and settings. Don't forget to make sure that the network card is enabled in the BIOS.

A network card is a computer component that is used to connect to a local network. These devices rarely cause any problems, so in most cases, users do not even know which network card is on their computer.

However, such information may be needed, for example, to find suitable drivers. In this material we will look at 3 ways to find out the name of the network card used on the computer.

Method number 1. Device Manager.

If you want to find out which network card is on your computer, the easiest way is to use Device Manager. There are different ways to open Device Manager. The easiest option is to press the Windows-R key combination and enter the command “mmc devmgmt.msc” in the window that appears.

You can also use the search in the Start menu. To do this, open the Start menu and type “Device Manager” into the search bar. After this, the system will find the desired program and offer to open it.

After opening Device Manager, expand the Network Adapters list. In this list you will see the name of the network card that is installed on your computer.

It should be noted that sometimes the “Network adapters” list may contain virtual network cards. Such cards may appear after installing some programs (for example, VirtualBox).

Method number 2. Command line.

You can also find out which network card is on your computer using the Windows Command Prompt. To do this, you first need to launch the command prompt. This can be done in different ways. For example, you can press the Windows key combination-R and execute the command “cmd” in the window that appears.

After opening the command line, you need to run the command “ipconfig /all”.

As a result, information about all network connections used on your computer will appear on the screen.

Here, among other information, the name of the network card will be indicated for each network connection. It will be indicated in the “Description” line.

Method number 3. Programs.

You can also find out the name of the network card that is installed on the computer using special programs for viewing the characteristics of the computer. For example, you can use a free program. Install this program on your computer and run it.

After starting the program, open the “Network” section. Here you will find all possible information about your network connections and network cards.