How to connect a wireless wifi router. Reflashing the router for high-quality work. Where is the best place to install a Wi-Fi router?

The Internet has become an integral part of life, and every computer should have access to the network. At home, a connection via a Wi-Fi router is suitable for this, which provides the ability to use both a wireless connection (for laptops, mobile phones, tablets) and a cable connection (for desktop computers).

Where is the best place to install a Wi-Fi router?

For those who are considering options for how to install a router, you should start by choosing a location to place the device. This is influenced by several factors:

location of the provider's modem or cables, if used;
apartment layout;
location of the desktop computer (if any).

There are different models of wireless devices from Asus, TP Link, D-Link, etc. They may have different data transfer rates and coverage areas. This should be taken into account when you choose a location for the device, so that access is available anywhere in your apartment. In this case, the best solution would be a central point, if the cable, location of the modem and desktop PC allow it. If you have to install the device closer to the computer in order to run a cable to it, then you need to focus on this factor.

How to connect a router to a computer or laptop

It’s easy to figure out how to connect a Wi-Fi router to a computer. The process itself is quick, but problems may arise with setting up the device. Separately below, we will consider the option of connecting a desktop PC via a wireless network and using a network cable. The option of how to connect a router to a laptop is practically no different. Before purchasing a receiver, you should keep in mind that there are models on the market that do not support Wi-Fi distribution and act as an adapter (for connecting several devices).

At the first stage, to gain access to the Internet, you need to correctly connect the wires to the device. There are several major manufacturers of routers, but the connection diagram always remains the same. Here are step-by-step instructions on how to connect a wifi router to a computer:

Unpack and install the device, plug it into a power outlet. On the back panel, as a rule, there is a button to turn on the device: press it. If a signal is received, the lights on the router will light up.
There are several sockets on the rear panel. One of them is always located on the edge and painted in a different color (blue, yellow) with the signature WAN. Connect the wire from the modem or the Internet cable into it. You should hear the latch click, indicating that the cord is securely secured.
If you need to connect a cable to the PC, then insert it into any of the empty sockets nearby and stretch it to the connector on the network card. When connected, the light should light up, which means there is a signal.
When connecting wirelessly, you need to go to the network settings on the PC itself.

Wireless router connection

Most users are interested in the option of how to connect to a router wirelessly. In the case of a laptop, everything is much simpler, because it has a built-in module for receiving a Wi-Fi signal. When it comes to regular PCs, the situation is somewhat more complicated, because you will additionally need to purchase an adapter for a Wi-Fi network. They are easy to find in any hardware store and are often sold together with modems.

There are two options for Wi-Fi adapters for PCs on the market – external and internal. The first ones are connected via a USB cable and stand on the table; they look like a docking station for an Apple player. The latter are mounted on the motherboard via a PCI connector. They work equally well, but the external version can be disconnected and connected to another device, and the built-in one does not take up space on the table. A disk with drivers and software should come with the device.

After connecting to the computer, setup occurs in exactly the same way as on a laptop. In most cases, to enable Wi-Fi on your computer, you just need to find your connection in the list of networks and enter the password. If you are connecting for the first time, you may need to specify the settings that were given to you when concluding a contract with the provider.

Wired connection using twisted pair

Previously, there was only one way to connect a wifi router to a desktop computer - a cord. At first, a cable from a telephone line was used (sometimes still used), then others appeared that provided not only the computer with Internet access, but also the TV with cable channels. This connection method is still used today, as a rule, for stationary PCs. How to connect a computer to a router via cable:

connect the provider’s wire to the wi-fi router into the socket labeled WAN or Internet;
The power cord should be inserted into one of the LAN connectors;
the second end of the cord must be connected to the Ethernet port of the computer, after connection the light should light up (blink).

What to do if the router does not connect to the Internet

Even if you know how to connect a wifi router to a computer and have done all the necessary manipulations, a situation may arise that a connection to the Internet is not established. At the same time, everything works correctly through the cable, and the wireless network does not transmit data, but is visible in the list of connections. If you call the provider’s support service, the first thing the specialist will do is to unplug the Wi-Fi device from the socket, wait 3-10 minutes and turn it on again. In many cases this really helps.

If this method does not help, then there is a high probability that the computer cannot automatically obtain the IP or DNS address of the network. To check the settings, you need to right-click on your connection, select “Network Center”, click on the image of the network connection and go to the “Details” tab. If the DNS or IP item is empty, then this is the problem. You need to call support and find out what values need to be entered in the properties. After receiving them:

Click on the connections and click on the “Properties” button.
Find the item that ends with TCP/Ipv4. Click on it and click "Properties".
Activate the “Use the following IP address” items, enter the data provided to you by your provider.
Repeat the same for DNS gateways.
Click "Ok" and close the other tabs.

Video instruction: how to connect a router to a computer

Nowadays there are a huge number of different Wi-Fi routers from different manufacturers on sale. And that’s good, there’s plenty to choose from. But immediately after purchasing a router, we need to install, connect and configure it. And if the connection process is practically the same depending on the model, then the setup process itself and the page with the router settings can be different even from the same manufacturer.

It is very difficult to give detailed and step-by-step instructions on setting up different models in one article. But I'll try. In this article I will describe in detail and show how to install and configure a Wi-Fi router. Regardless of what manufacturer and model you have. This universal instruction is suitable for both setting up a new router and re-configuring it. You can do everything yourself. And you don’t have to pay specialists for setup.

Login to the router settings. How to log into the web interface?

Each router has its own web interface (site with settings, control panel), which can be accessed through a browser by going to the appropriate address.

Important! To go into the router settings and configure it, your device (PC, laptop, smartphone, tablet) must be connected to the router via cable or Wi-Fi network. At the same time, there may be no access to the Internet on the computer. You don't need internet to log into the control panel!

If you have a high-speed connection on your computer (maybe with your provider's name), then after connecting through the router there is no need to start it!

To enter the settings we need find out the address our router and factory username and password for authorization. This information is located on the body of the device itself. It looks something like this:

On a computer or mobile device that is connected to the router, open a browser (Opera, Chrome, Yandex.Browser, etc.) and go to the address indicated on the case. Or try 192.168.1.1 and 192.168.0.1.

Important! We enter the address in the address bar, and not in the search bar. Many people get confused and instead of a page with settings they end up on a page with the search results of some search engine.

On the login page you need to specify a username and password. The factory settings are indicated on the device body. Most often these are admin and admin. On some models, the default settings are not protected, and immediately after logging into the control panel, you need to set a login and password.

Articles that may be useful to you at this stage:

If the settings page has opened, we can continue. If not, then see the article with solutions to this problem at the link above.

How to set up a Wi-Fi router?

In order to use the Internet through a router, you need at least:

Set up an Internet connection.
Set up a Wi-Fi network.

In most cases this is enough. I also recommend changing the password that protects the router’s web interface. There are also settings for IPTV, USB drives, parental controls, etc., but not everyone needs them.

In the control panel of almost every router there is a so-called “Quick Setup Wizard”, also known as “Quick Setup”. On some devices, it opens immediately after logging into the control panel. With its help, you can configure your Wi-Fi router step by step. Internet connection, wireless network, etc. For example, what it looks like at TP-Link:

You can try it, it's very convenient.

Internet setup. The most important step

The main thing is correctly configure the router to connect to the provider. If he cannot connect to the Internet, then all devices will have a “No Internet access” connection. Many users who try to configure everything themselves most often encounter problems at this stage.

Each Internet provider uses a specific type of connection. Dynamic IP (DHCP), Static IP, PPPoE, L2TP, PPTP. This type of connection must be specified in the router's control panel, and certain parameters must be specified by the Internet provider.

Important! You must know exactly what type of connection your provider has. Also all the necessary data for connection (Username: Password), if they are necessary. As a rule, this information is indicated in the contract that you received when connecting to the Internet.

Some providers bind by MAC address. It would also be desirable to clarify this.

If your provider uses a “Dynamic IP” (DHCP) connection, then the Internet should work immediately after connecting, since this type of connection is set by default on routers.

If the Internet through the router is already working (and you haven't run any connections on the computer), then you can skip this section and go straight to setting up Wi-Fi.

When the connection type is PPPoE, L2TP, PPTP, or Static IP (which is very rare), then you need to set the necessary parameters. Usually, this is the login and password that your provider gave you. In the control panel, the section with these settings is most often called: “WAN”, “Internet”, “Internet”.

For example, what the PPPoE connection setup looks like on an ASUS router:

Other examples:

Target: so that the Internet through the router works on all devices. Via cable and Wi-Fi. If this does not happen, then there is no point in continuing the setup.

You can always call the provider and clarify what parameters should be specified and where. They help many people over the phone.

Articles that may be useful to you:

I hope everything worked out for you.

Changing Wi-Fi network settings

I highly recommend changing your Wi-Fi network name and password. It is also advisable to set your region. Everything is simple there. This can be done in the wireless network settings section. It can be called differently: “Wi-Fi”, “Wireless network”, “Wireless”, “Wireless mode”. If you have a dual-band router, then the settings must be set separately for the network at 2.4 GHz and 5 GHz.

In the "Network name" (SSID) field you need to enter a new name. In English letters.
In the "Password" field (wireless network key) create and write down a password. Minimum 8 characters. Security type - WPA2 - Personal.
Well, there should be a “Region” field there. Change it to yours.

If something doesn’t work out for you during the setup process, you can always reset the settings to factory defaults and try setting everything up again. Find the “Reset” or “Reset” button on the case, press it and hold for about 10 seconds. The indicators will tell you when the reset occurred.

You can leave questions in the comments. I just have a small request, describe the problem in detail. Write the router model. Otherwise, it’s very difficult to understand and advise something when you don’t understand the question itself. Best wishes!

How to connect a router to a router via wifi? This question is often asked by users who want to expand the coverage area of their router.

Thanks to the use of two combined devices, you can significantly improve the quality of your Internet connection and increase your Wi-Fi coverage area by almost two to three times.

You can expand your router's coverage area by boosting the antenna. You can also not amplify, but separately buy and install a more powerful antenna.

This method is less expensive because you don’t need to buy another new router.

However, if the antenna improvement method does not bring any results, you can try setting up an access point on two routers at the same time.

First you need to determine the approximate diagram of the mutual connection of the two devices.

Schematic example of connecting two routers

If you want to link a router to transmit a signal over longer distances, you should familiarize yourself with the basic connection diagram for these two devices.

It can be used to connect a network in an apartment and in any other private sector.

An example diagram looks like this:

According to this diagram, there are only two ways to interconnect two routers: via wire and wireless connection. Let's take a closer look at them.

Connecting two routers using a wire

The easiest way to connect two routers to one access point is the wired method. To work, you will need the most common UTP cable, another name for it is twisted pair.

You can purchase it at any telecommunications store.

The average market price of this type of cable is 20-30 rubles per meter. The appearance of a twisted pair Internet cable is shown in the figure below:

To connect two routers using twisted pair, follow the instructions:

Make sure both sides of the cable have adapters. Also make sure that the cable size matches the distance from one router to another;
Take two routers;
Connect them using a cable. Connect the twisted pair cable to the LAN port of the router that is configured to connect to the Internet. Connect the other end of the cable to the WAN connector of the unconfigured router. Another router will transmit the signal over a long distance;
Now just configure the router connected to the Internet in the standard way, and assign a dynamic IP to the other router.

Advice! The disadvantage of this connection method is that in some cases it is inconvenient to lay the cable over long distances (when you want to create coverage between several floors, for example).

Also, over time, the cable may be subject to mechanical breakdowns, which cannot be corrected and then you will have to buy a new cable.

Wireless connection between two routers

This type of connection does not require any wires. However, the complexity of this method lies in the fact that it is very important to configure the equipment correctly:

Take a router to which the Internet will be connected;
The second router will be the access point;
Set up the first router in the standard way, as if you were using only one router;
Now connect your computer to another router;
Using the control panel, open the wireless network settings window, in which select the Internet protocol selection window.
Select the second router and configure the IPv protocol for it. Then click on the properties tab and enter the following text (without quotes) in the next address usage field - “192.168.1.254”;
Save your settings and open your browser. In the address bar, enter "192.168.1.254". The settings menu for the second router will open;

Click on the “search” button;
A window will open with a list of available wireless networks. Select the network of the first router and press the save key;

Reboot both access points.

How to connect the Internet through a router?

Using a router, or, as it is also called, a router, you can create a local network in your apartment that will distribute the Internet to all technical devices connected to it.

Today we will look at how to connect the Internet via a router yourself.

Equipment and device of the router

Router equipment

Open the box and check the contents. The router package should include the following: the device itself, an adapter (power supply), an Ethernet network cable (RJ-45 connector), a disk with drivers and installation program, and a guide for setting up the router. In this case, we will not need the installation disk, since we will set all the settings ourselves.

Router device

Turn the router over so the back panel is facing you and look at the ports. Typically the device contains five connectors, four of which are the same color. These inputs are called LAN ports and are intended for connecting equipment with which you want to access the global network. The fifth connector is different in color and is called WAN or Internet port. This connector is intended for connecting the Internet cable that was provided to you by the specialists of your Provider.

To the right of the Internet connector is the input for connecting the power supply. And the panel closes with a small button called “Reset”. The button is used to reset settings and reboot the router. To restart the device, you need to press the button (with a thin tip, such as a toothpick, etc.) and hold it for five seconds. When you press the "Reset" button, all configured settings are reset and the default settings are restored.

Installation, connection and configuration of the router

Installation and connection

First you need to call your Provider's technical support operator. Tell the specialist that you want to register the router and tell the specialist the MAC address of the device (the number is on a sticker on the router itself and is also written in the instructions).
Determine the location of the device: the router can be installed directly in the room where the computer is located, or hung on the wall, for example, in the hallway. When installing the router, make sure that there is a 220-volt power outlet nearby.
Then connect the power supply to the router and plug the device into a power outlet.
Connect the Internet cable to the WAN connector.
Connect the network cable to one of the LAN ports on the router, and on the other side to the corresponding input on the computer or laptop.
After connecting the device, we proceed to setting it up.

Settings

Click "Start", go to "Control Panel", select the "Network Connections" tab and go to "Local Area Connection".
Right-click on the connection icon and select "Properties".
Then click on "Internet Protocol (TCP/IP)" and click on the "Properties" button.
Check the appropriate boxes to automatically configure IP and DNS addresses.
Depending on the operating system, the progress of setting up IP and DNS may differ. (Click the "Start" button and select "View network connections." Next, select your connection type and go to the "Local Area Connection" section. Go to "Properties" and select "Internet Protocol Version 4." Then through the "Properties" button "go to the next window and check the appropriate boxes to automatically configure IP and DNS addresses).
Next, find the device’s IP address in the router’s instructions. For most manufacturers, the router has an IP address of 192.168.0.1 or 192.168.1.1.
Enter the IP into the address bar of the browser and press the "Enter" key.
In the window that appears, you must enter your username and password. The data also needs to be found in the manual for using the router. For most models, the username is admin, the password is admin, or an empty string (that is, the password field remains empty).
Then again you need to dial the Provider operator and find out the following settings characteristics: connection type, server, username and password. Also find out if there are additional settings available.
After entering the default username and password, you need to go to the “Setup” section and select the “Internet Setup” tab.
Then click on the “Manual Internet Connection Setup” button and write down all the settings that the specialist dictated to you.
After entering the settings, click the "Save" button.

Check out the articles as well.

Today, many families have long had a couple of computers or laptops, and sometimes both. Plus to all this there are also smart phones, and maybe a tablet. And, of course, the center of entertainment for every family member is the big one. Up to a certain point, everything usually goes fine, as long as everyone in the house uses their devices, but then the desire for something more appears.

This requires a home wireless network. It helps to get rid of unnecessary wires, be more mobile, and, of course, makes all the media content accumulated by family members available to everyone.
Such home wireless network is organized using a wi-fi router that distributes a signal to many devices that support a wireless connection. Or you can join the distribution using network cables, but to do this you will need to register IP addresses for each connected device.

For greater comfort in accessing content, use a NAS server. This can be either a separate system unit with several HDD drives, or a ready-made boxed solution. Such a home server allows you to connect any device wirelessly and watch HD videos, music, play games and much more, and most importantly, store it all on your own disks. The home server is also connected to the wi-fi router.

The most common Internet connection options

With dynamic IP (Auto IP or DHCP)
With a static IP address (Manual configuration of the WAN IP address setting field, mask, gateway...)

We will consider the 2nd option, with a static IP address. As soon as you select it, the fields for entering static connection parameters will become active - “Setting up the WAN IP address”, which must be filled in according to the data received from the Internet provider.

Click “No” and fill in all fields one by one.

It is worth noting that in this case the IP address and other network parameters are fixed, they should be entered exactly as specified by the provider.
If you select the option with a dynamic IP address, or PPPoE or L2TP, then the setup is simplified and the router will receive all connection parameters from the provider automatically. Only for the last two connection types you need to specify the name and password provided by the provider (or in rare cases, the “Service Name”).

Complete the settings by clicking the "Apply" or "Save" button.

In some cases, the provider binds the user to the MAC address (physical address) of his computer so that no one else can connect instead of him. In this case, attempting to access the Internet using the router will become impossible.

To avoid this, the MAC address of the router's external interface should be changed so that it matches the MAC address that your ISP assigned you to (usually the address of your computer's network interface).

This operation is called MAC address cloning, although this function in the router’s web interface does not always have the same name.
To clone the MAC address of your computer, which was connected by cable to the Internet before installing the router, enter it in the MAC field of the “Special requirements of the Internet service provider” section in the WAN section, Internet connection tab.

Save the settings by clicking the "Apply" button.

How to find out the MAC address of a computer

To find out the MAC address of your computer and enter it when setting up an Internet connection on the router,
do the following:

1. Click on the computer icon in the task tray (tray), click “Network and Sharing Center”

and in the window that opens, select “Local Area Connection”.

2. Click on the "Details" button to see the MAC address.

The MAC address will be located in the Physical Address field.

Configuring Wi-Fi settings manually

If you did everything correctly and specified the correct connection parameters, then after rebooting the router you will have access to the Internet from the computer on which you made the settings. Open your browser and type
address of any website, for example . The site page has opened, so you can start
to setting up a wireless network (wi-fi).

In the router web interface menu, select the “Wireless” section, “General” tab.

Please note that some routers support wireless networks in two bands at once (5 GHz and 2.4 GHz). Set up a wireless network in the more popular 2.4 GHz band.

Specify the wireless network operating mode. The best option is a universal setup that ensures compatibility with both new and old versions of the Wi-Fi standard. It is called “Mixed” or “Auto” (automatic mode).

Enter the network SSID (Network name that will be displayed when scanning) in the field of the same name. Select a security option in the “Authentication method” field, I recommend WPA2-Personal, read why in the Wi-Fi section. Enter the password (or key) in the WPA Pre-Shared Key field. This key and network name (SSID) will be required to set up access on your wireless devices, so it is recommended that you save them to a file or write them down somewhere safe.

It is recommended to hide the SSID so that your home wireless network was not visible from the outside, but you will still be able to connect to it, since you already know the SSID. To save the settings, click on the “Apply” or “Save” button. By the way, a wireless network in the 5 GHz band is configured in the same way.

Attention! Be careful when updating your router firmware. The need for it is determined by incorrect operation of the router and communication problems. Carefully read the section of the user manual about updating the router software and strictly follow the recommendations. Updating the router firmware is a last resort; you should not resort to it unless absolutely necessary, since there is no such need during the initial setup of a wireless network.

P.S. I would be very grateful if you point out those points that need to be examined in more detail.