How to put on protective glass. How to install a protective glass on your phone yourself

After purchasing a new smartphone, the user strives to maximally secure and protect the device from damage. In this case, additional accessories and protective elements come to the rescue. Previously, protective films were at the peak of popularity, allowing you to protect the screen from minor mechanical damage. Today the question is increasingly being asked,how to stick protective glass on your phone,because today it is the one that is leading the way in ensuring display integrity.

Uninitiated users do not see much difference between the usual film and protective glass. It is just as flexible and elastic. But still, it is glass, and it is additionally tempered and especially durable, capable of protecting the screen from most possible damage. The accessory is great for people who often drop their smartphones or are afraid of scratching the screen. The coating perfectly strengthens the screen and allows you to maintain the integrity of the display, even if the gadget falls face down. If, nevertheless, the blow turns out to be very strong, the protective glass will not allow fragments to fly away, which can be very dangerous.

Due to more significant characteristics, the cost of such an accessory is much higher than, for example, films. At the same time, the glass cannot be cut to fit the gadget, so you have to buy ready-made products adapted for a specific model. The question ishow to stick protective glass on your phone, users are interested in due to the fact that it costs extra money in the salon, but you can handle the process yourself.

The thickness of the coating ranges from 0.18-0.33 mm. It can add weight to the device and make it somewhat bulkier, so you need to be prepared for this.

Protective glass consists of several layers:

• silicone backing, necessary for the strongest possible fixation of the accessory on the screen;
• the next layer, the restraining layer, fixes glass fragments and prevents them from scattering in the event of a serious impact;
• a protective layer responsible for the strength of the glass itself;
• anti-reflective layer - ensures comfortable use of the gadget even in sunny weather;
• oleophobic layer - a coating that prevents fingerprints from being left on the display.

Glass does not affect the sensitivity of the sensor, does not spoil the image, that is, it allows you to use the gadget with no less comfort. Thanks to all the advantages of such protection, it has become in demand and fully meets consumer expectations.

How to stick a protective glass on your phone

How already mentioned above,stick protective glass on your smartphoneyou can do it yourself. To do this, just follow some recommendations.

Materials and tools

Despite the fact that the process is accessible, you should prepare the necessary tools in advance so as not to be distracted. In order to stick the protection on the screen yourself you will need:

• alcohol wipe, you can buy them at the pharmacy;
• dry soft cloth;
• liquid for cleaning displays and TV screens, you can buy it or mix it yourself, for this you will need water, alcohol and dishwashing detergent;
• dust collector or tape (to attract dust particles);
• the protective glass itself.

In addition, a plastic one may come in handy if there is no special spatula included with the protection.

Preparation of the workplace

In addition to preparing the tool, it is also necessary to prepare the workplace. It is important that it is not dusty. It is best to carry out the procedure in the kitchen or bathroom. The less fabric material around, the less dust, which will certainly settle on the screen much faster than you expect.

The table on which work will be performed must be thoroughly wiped with napkins. Before starting the process, you also need to wash your hands with soap to get rid of accumulated fat. Once everything is ready, you can proceed directly to the process.

Pasting algorithm

How to stick a protective glass on a phoneNot everyone hires, but if you follow the recommendations that we will describe below, difficulties should not arise.

So, all the equipment has been collected, the work place and the master’s hands have been prepared, let’s move on to the main stage.

1. Prepare your gadget's display. Remove the old coating by carefully picking up the edge and pulling. Regardless of whether the film on the device is factory-made or purchased, it peels off very easily.
2. Clean the sensor surface with an alcohol wipe or cloth with screen cleaner. It is important to carefully treat the entire surface so as not to leave any contamination. The display needs to be rubbed to maximum shine.
3. If dust particles remain on the surface, then it’s time to use a dust collector or tape. The whole process is aimed at attracting dust particles with static electricity (and under no circumstances sticking tape on the screen).
4. We take the screen out of the packaging and remove all protective films from it. We combine all the elements of the screen with the holes on the glass (central button and speaker). Make sure that the protection fits evenly with the edges of the device and lies flat. At the same time, you need to hold the glass by the edges so as not to scratch it. If you doubt that you can handle it, it is better to wear medical gloves.
5. Secure the protection by running your fingers from top to bottom along the center of the display. Then, using a spatula or credit card, remove the remaining air using characteristic movements from the center to the edge. If small droplets of air remain, this is not a problem. He will come out on his own in a few days. Therefore, do not put excessive pressure on the display.

If all measures are followed and recommendations are followed, the user will receive a perfectly even coating without streaks or clouding. If the latter appear, it means that the screen was poorly cleaned. To get rid of the jambs, you can peel off the glass and repeat the process.

This question follows on from the previous problem. Is it possible to remove the glass and clean the screen or re-stick the protection from one gadget to another. If the protection surface is not worn out, then this approach is quite appropriate.

In this case, additional processing of the adhesive silicone layer is required. Formic alcohol is used for processing. You need to carefully remove the glass and wipe the adhesive side with a cloth moistened with plenty of liquid. Wait until the liquid drains and dries and you can install the glass again.

When buying a new smartphone, you want to preserve the presentation of the gadget for as long as possible.

That is why it is common to buy protective glass or films along with the phone. With their help, the device screen can be protected from chips and scratches that form as soon as possible. We tell you how to properly apply protective film or glass at home.

Protective glass or film: what to choose?

When choosing a defense mechanism, every user asks the question - which is better? It is impossible to answer this question unequivocally, since each means of protection has pros and cons.

Protective glass provides reliability when the phone falls, but at the same time increases its thickness. The film is practically invisible during operation, and is also much cheaper, but the level of protection is lower. Despite the differences in certain parameters (degree of protection, price, durability), the principle of gluing these elements is the same.

Most protective accessories have brief instructions on the sticker, but manufacturers are silent about some factors, so we’ll look at each point step by step.

Preparing the place and accessories

Prepare your work area. Wipe the table where the sticker process will take place. It is recommended to place a desk lamp above the phone to better see “problem areas” on the screen. Additionally, do not forget to wash your hands with soap and dry them.

The glass or film usually comes with tools. In most cases the kit looks like this:

1. The green “dry” bag is a dry cloth for cleaning the screen.
2. Pink “wet” bag – a wet wipe for cleaning the display.
3. A microfiber cloth that reduces the likelihood of picking up dust particles.

The first stage is cleaning the glass. Place your phone on the table. Pick up a napkin that says “wet” (sometimes it’s even numbered one). Wipe the smartphone screen with a damp cloth. Try to wipe the display so that not a single speck of dust is visible in the light.

The second stage is “drying”. Now take a second rag labeled “dry” (similar to the previous napkin, numbered two) and wipe the screen dry. Please note that your fingers should not touch the display.

The third stage is “intermediate”. Some manufacturers include an adhesive film in the kit to further rid the screen of dust particles. If you have such a tool, just stick it on the display and peel it off after a couple of seconds.

Working with glass

Take protective film or glass in your hands. Look at her carefully. Manufacturers supply protective equipment with a special tongue to make it easier for a person to peel off the “sticky” part.

Having carefully peeled off the “adhesive part”, take the special glass by the “edges” and begin to slowly apply it to the phone. It is extremely important to ensure that the contours of the film and the screen match. While “aiming”, do not press on the display.

Release the glass. While it gradually sticks, make sure that there are no dust particles or bubbles anywhere. If no problems are found, effortlessly (lightly) swipe your finger across the center of the screen. If you notice any air bubbles, take a dry cloth and push them towards the edges of the display.

Once you are sure that there are no dust or air bubbles left under the glass, wipe the display again with a dry cloth.

Dust particles as a separate problem

There is a possibility of noticing a speck of dust after the procedure is completed. In such cases, you will need to re-raise the glass. This operation can be performed using a bank card. Additionally, take a small strip of stationery tape.

1. Pick up the edge of the glass that is closest to the speck of dust.
2. Place a piece of tape on the problem area
3. Quickly tear it away from the screen.
4. Return the protective glass to its original position.

Every smartphone needs protection. Even if you purchased an iPhone, do not refuse to put on a protective glass. After all, replacing a protective glass is several times cheaper than replacing a screen. With a protective glass on your smartphone, you won’t be afraid of scratches and other damage if you know how to properly stick the protective glass on your smartphone at home. The task is not an easy one, but if you follow these instructions, you can easily glue the glass at home, without asking third parties for the service.

If you are encountering this for the first time, it may seem to you that this is a very difficult process. But once you practice, you will be able to glue glass without difficulty and without bubbles.

Let's move away from the topic a little. I’ll tell you on my own, I personally don’t buy glass in the city. I buy glass on Aliexpress. Previously, of course, I bought glass in stores in the city and also paid to have it glued on. And now I buy glass for myself and friends on Ali, since I haven’t noticed a difference in quality, and the cost is 3-5 times higher. So I advise you to take several glasses from different sellers for your smartphone and try to stick them on. After all, you must admit that if you spoil glass bought in the city for 700 rubles, it will be very sad. And on Aliexpress you can buy 4-5 glasses in one day. and enter your smartphone model and select.

And so, let's return to the process of gluing glass. It makes no difference whether you glue the glass onto an iPhone, tablet or some other device, the process is the same everywhere.

The display of a smartphone is very sensitive to mechanical damage, no matter how much it was purchased for. A phone in your pocket can get scratched by anything, coins, keys, or even nails. And if there are already scratches on the screen, then when gluing there will be bubbles that are almost impossible to remove.

What you need for gluing glass:

• Alcohol wipe
• Dry cloth
• special liquid for cleaning TV or computer screens
• tape or dust bag
• glass

Usually everything you need for gluing comes with the glass.

The most important thing is the room in which the gluing will be done. This should be a room with minimal dust. A kitchen or bathroom is best. The bathroom has the highest humidity and therefore a minimum of particles in the air, which is exactly what we need. Run a hot shower for a few minutes to raise the humidity and you’re good to go. Yes, gluing will not be entirely comfortable, it will be stuffy, but it’s worth it, the glass will be glued perfectly, without lint or bubbles.

Wash your hands with soap, then place the equipment, protective glass for iPhone 6 or other phone on a clean, smooth surface.

Before starting the procedure, remove the old film from the device. To do this, slightly pull the edge at a 60 degree angle.

Use a cloth with alcohol to wipe off dirt from your phone screen to ensure a perfectly clean surface.

If there are dust particles left, we go over the surface with tape or a dust collector.

We take the glass out of the packaging and remove the film from it. We install the protection so that it matches the central button of the gadget and the speakers. Slide your finger down the center from top to bottom to secure the overlay. If the air remains, we expel it with a credit card or the device that comes with the kit.

There is no need to try with all your might to squeeze out the remaining small bubbles. if you overdo it, you can crush the screen) After a couple of days, they will disappear on their own if you did everything correctly and if it is not the villi that are creating the bubbles.

Video

The videos below will help you apply protective glass at home. without outside help. The protective glass will protect from negative influences and the phone will remain attractive for longer. The protection will protect the device from scratches and also absorb shock when dropped. However, the sensitivity of your phone's sensor will remain the same.

On iPhone

On Samsung

On Lenovo

On xiaomi

Having picked up a brand new, cutting-edge smartphone for the first time, the new owner of a convenient, functional communication device understands: the display is the most vulnerable area. But it is he who is the main center of communication between the device and the user. How to protect the display from mechanical damage? If we are talking about a smartphone, for example Xperia, experts do not recommend gluing the film for the reason that special protective glass can be purchased for the vast majority of models of modern smartphones. Currently, many variations of this accessory are presented in abundance on the most advanced trading platforms.

As practice shows, no matter how reliable the standard smartphone display glass is, extra protection will not hurt it. Accidental impacts and falls, active use, carrying the device in a pocket or bag - all this will invariably lead to scuffs and cracks appearing on the glass.

Protective glass, the thickness of which varies from 0.2 to 0.3 mm, consists of five layers:
Oleophobic layer. Allows your finger to glide smoothly across the screen. The layer effectively repels moisture. Fingerprints can be easily removed with an ordinary cloth.
Protective layer (hardness 9H). Gives glass resistance to mechanical stress (impacts, scratches).
Anti-blocking layer - prevents the screen from fading.
The so-called containment layer. Even if you somehow manage to break the screen, this layer will prevent it from falling into pieces.
Silicone base. Reliably fixes the protective glass on the screen.

The process of sticking such a protective glass on the smartphone screen is very simple, you just need to follow the recommendations specified in the instructions. Usually, the protective glass kit includes everything necessary to fix it on the smartphone screen:
cloth for pre-cleaning glass;
wet and dry wipes for degreasing and wiping;
adhesive strip designed to remove settled dust;
a couple of small adhesive strips to properly fix the glass on the device display.

The protective glass is glued to the smartphone very quickly. To do this, you just need to use all the materials at hand for their intended purpose, following the instructions exactly. If during the process of attaching the protective glass an air bubble has formed under it, you just need to gently push it with your finger, move it to the edge and remove it.

We invite you to watch the video instructions on how to stick protective glass on a smartphone, using the example

This product is not for sale

• — We will make all the necessary settings!
• - Let's teach you how to use it correctly!
• - Exchange or refund without any problems!

Liked?
Tell your friends!

Discussion KNOW-HOW service Gluing protective glass onto a smartphone screen

• Gluing protective glass

  • Elena
  • 20 Jul 2017, 18:22
  • 1 thanks!
  • Pros: Available
  • Disadvantages: The prices for the services provided are overpriced, the employees do not know how to provide services at a good level

  Comment: Today I purchased protective glass from your store and asked a store employee to immediately stick it on. The start was good, he said that we would do everything within 5 minutes. I glued it, peeled it off, glued it again, some small fluff stuck to it, peeled it off again, this happened 4 times. In addition to everything, it was not evenly glued yet, I drew attention to this, to which the employee said that the screen was uneven. haha not the first time I glued glass and everything was fine! I no longer had patience, because everything had already lasted for 25-30 minutes. I went to pay at the checkout and then they told me that the glass sticker costs 700 rubles. Firstly, compared to other stores, it’s a bit expensive, twice as expensive, and secondly, there wouldn’t be any complaints if they glued it properly! I was very unhappy, the employee ruined the whole mood, proving that he did everything perfectly, and it was all my phone’s fault! Tver (employee Ivan - huge gratitude for raising my nerves)

• • Alex
  • 16 Jul 2018, 11:40
  • 0 thanks!

  yes, I completely agree with you! I recently bought a phone and purchased a protective glass in the store. I had the same situation with them, they said that we would do everything within 5 minutes. They did it with bubbles, not professionally at all, and in the end they charged you another 800 rubles, but I ask why, since I bought the glass protection for 700 rubles. returned the favor. in the end 1500r. I really regret that I spent money and the glass protection is about to fall off the screen.

• • Expert KNOW-HOW
  • 16 Jul 2018, 12:17
  • 0 thanks!

  Hello Alex. Please return to the store and ask for the protective glass to be re-glued correctly. If the product turns out to be defective, you can return it and get your money back. And thank you for your feedback, which helps us improve our service.
  Best regards, Technical support

• Safety glass sticker

  • Lyudmila
  • 25 Oct 2017, 22:21
  • 0 thanks!

  Very interesting! Why does the service for a protective glass sticker on your website cost 600 rubles, but in the store they charged me
  as much as 800.00 rubles. What is this connected with? A complete disgrace. They also gave me a month of conversation on the Beeline line for 200 rubles as payment, without even asking
  to the public. In general, 400.00 rubles were ripped off just like that, without even looking. You can't do that, gentlemen. Not everyone is as rich as you think. Moscow

• • Expert KNOW-HOW
  • 26 Oct 2017, 12:47
  • 0 thanks!

  Lyudmila, hello. We don’t even know what to think.... Please send us a check by mail [email protected] . And please answer the questions: when you pay for goods and services at the cash register, do you have any vague doubts about the stated cost? And how do you like it They also gave me a month of conversation on the Beeline line for 200 rubles as payment, without even informing me , if you don’t need it, as it turned out at the time of writing this review? Why didn’t you go back to the store and contact the seller? Some questions, Lyudmila, I would like to get answers to resolve your situation. Thank you. We will be happy to help you.
  Best regards, Technical support

• Deception

  • Kirill
  • 03 Nov 2017, 12:27
  • 0 thanks!
  • Pros: No
  • Disadvantages: Deception

  Comment: I bought glass for iPhone 6s,
  They stuck it on me, the cost of the sticker together with the glass was 2800.
  As a result, the glass does not block the screen when making a call, iPhone owners will understand that when asked whether it is possible to refuse the glass and take the money, they say that I need to bring a box that no one gave me, the receipt contains some services, to pay for Beeline in the amount of 200 rubles , about which no one told me anything!
  In general, I do not recommend using the services of this store!

• • Expert KNOW-HOW
  • 07 Nov 2017, 11:34
  • 0 thanks!

  Kirill, hello. Please send us a check by email [email protected]
  Best regards, Technical support

• Protective glass

  • Maria
  • 24 Nov 2017, 07:59
  • 0 thanks!

  Hello. A week ago I bought a Huawei Nova 2 phone. The seller offered a protective glass. I bought it for 600 rubles and 1000 rubles for the service. Within a week the protective glass fell apart. Question: why is the service so expensive and can I contact them to have the glass replaced?

• • Expert KNOW-HOW
  • 24 Nov 2017, 11:25
  • 0 thanks!

  Maria, hello. Return your problem to the store, the service is guaranteed for two weeks.
  Best regards, Technical support

• Very poor quality of service

  • Natalia
  • 29 Dec 2017, 22:26
  • 0 thanks!

  I bought glass for my iPhone and a sticker service. As a result, by the time I got home, the “glass” came off and turned out to be plastic. Of course, I threw away the receipt... they also offered to buy a card - Like a mega discount... I’ll never come to your store again - it’s not clear why this discount is, employee Ilya (Bravo Almatinskaya) said

• • Expert KNOW-HOW
  • 30 Dec 2017, 03:29
  • 0 thanks!

  Natalya, hello. Please return to the store and ask for the glass screen protector to be re-taped, the service comes with a two week guarantee. If the store does not make concessions, call us.
  Sincerely, Technical support

• Protective glass

  • Milan
  • 08 Oct 2018, 15:16
  • 0 thanks!

  I bought a phone a couple of months ago and bought a case and glass for it. The phone fell several times, and when it fell, the case unfolded and did not cover the screen. Because of this, my phone was badly broken. But the main thing is that it was not the protective glass that broke, but the glass of the phone!!! It’s just shattered. I don’t know what to do. Is it possible to somehow return the phone or, for example, send it for repairs so that the real phone glass can be replaced? Will it be free?

• Know-how services

  • Michael
  • 19 Oct 2018, 16:26
  • 0 thanks!

  I wanted to buy a smartphone, but for gluing the protective glass they asked for 1000 rubles, with the price of glass being 1000, this is some kind of robbery, the work is for 3 minutes, they say they have such prices, people work for 1 thousand half a day. The store is in Zheleznodorozhny.