Menu
homePrograms

What does safe mode mean on your phone? How to remove safe mode on Samsung Android. Removing safe mode using Android

Safe mode may turn on automatically on an Android device (tablet or phone) due to damage to the integrity of the case, power button or volume control. And also due to purely software conflicts between installed applications, as a result of malfunctions of the operating system.

In the latter case (in the absence of physical malfunctions), you can restore the standard operating mode on Android using the following steps:

Note. If using one of the proposed options it is not possible to remove the activated safe mode, try another. The deactivation procedure on mobile devices of different brands can be performed differently.

Ways

#1

1. Turn off your phone.

2. Open the case and remove the battery.

3. After a few minutes, insert the battery.

4. Turn on the phone, enter the SIM card PIN code.

5. Once the download is complete, the operating system will automatically restore to standard mode.

#2

2. From the menu that appears on the display, select Power Off.

3. Turn on the device again. And while the operating system is starting, when the logo appears on the display, press and hold the “Volume Up” button.

#3

1. Press the “Shutdown” button.

2. Tap “Turn off” in the panel that opens.

3. Turn on your Android device. While the system is booting (after the logo appears), hold down the “Volume Down” button.

#4

If safe mode is activated after installing an application, remove it and restart the device.

#5

Restart your device and hold the Home button while turning it on.
Good luck and quick debugging of your Android device!

An Android device can automatically enter a safe operating mode as a result of operating system failures or due to incorrectly functioning applications.

In this guide, you will learn how to disable Safe Mode on Android in various ways.

Note. The effectiveness of the instructions in question depends on the type of mobile device (tablet, mobile), manufacturer (for example, Alcatel, Samsung, etc.), version of the operating system. That is, not all methods can be used on your device.

Method number 1: removing the battery

Attention! This method is only suitable for smartphones with a removable battery.

  1. Turn off your phone.
  2. Remove the back cover of the case. Remove the battery completely.
  3. Wait 1-2 minutes.
  4. Reinsert the battery and turn on the phone.

After these steps, the OS should start in normal mode.

Method No. 2: deactivation during reboot

1. Activate the system restart option.

2. Hold the Home button until the download is complete.

Attention! If your phone does not have a software reset command, turn off and then turn on the device using the appropriate keys.

Method number 3: changing settings in the system menu

Note. This shutdown method can be used on certain mobile models from Samsung and Sony.

1. Run the Reboot command or turn off and turn on your mobile device.

2. While the system is booting, hold down the “volume down” key until the startup procedure is completely completed.

Attention! In some phones, instead of “volume down,” you need to hold down the “volume up” key.

3. In the system menu that appears on the display, select the “...factory reset” option.

4. Confirm the request that you want to delete all data. Under the question line “... of all user data”, select the answer “Yes”.

5. After cleaning is completed, use the menu to start booting in standard mode (reboot system now).

Method No. 5: for Samsung with a system no older than version 2.3

1. Perform a power cycle restart.

2. Hold the "Menu" button while loading.

Method number 6: removing programs

1. Uninstall recently installed applications from the phone memory through the “Settings” menu.

2. After uninstallation, reboot the system. If the activation of the mode was caused by “conflicting” software, the phone will automatically restore standard operation.

Successful and quick setup of Android OS!

The Android operating system can easily be littered, thereby causing constant freezes and other unpleasant glitches. Safe mode can help you find out the reason for their appearance. Its main feature is the inability to use those applications that you installed after purchasing the device. You can only run pre-installed and system programs in safe mode. In this article we will talk in detail about how to launch this mode, as well as how to exit safe mode.

Google does not insist that all manufacturers implement a specific way to launch Safe Mode into their smartphones and tablets. Therefore, it may differ from model to model. The most popular method is as follows:

Step 1. Go to the shutdown menu by holding down the power button for a while.

Step 2. Hold your finger on " Turn off power" A new menu will appear.

Step 3. Agree with the system by clicking the " OK" The device will reboot, after which you will be in safe mode. The fact that you managed to enter it is indicated by the corresponding inscription in the lower left corner of the screen.

Programs and games that you installed yourself do not work in this mode. If your device runs smoothly in safe mode, then the problems are caused by one of the installed applications, and not by a poor state of the operating system.

Ways to start safe mode on different smartphones

The main method works on devices from the Nexus series and some other smartphones that are not supplemented with one or another proprietary shell. It is also used on unofficial firmware - for example, in CyanogenMod. On other gadgets, in most cases, a special list of actions is used.

HTC with hardware keys. Turn off your smartphone. Next, hold down the “Menu” key and press the power button for a couple of seconds to turn on the device.

Samsung Galaxy S3 and older models (OS version - Android 2.3 and lower). Turn off your device. Next, turn it on and wait until the manufacturer’s logo appears on the screen. Press and hold the “Menu” button until the operating system loads.

Modern Samsung smartphones (Android 4.0 and higher). Turn off your device. Turn on your smartphone and wait until the white logo of the South Korean company appears. At this moment, hold down the volume down button. Keep it until the operating system boots successfully.

Motorola Droid RAZR and some other devices. Turn off your device. Next, turn it on by pressing and holding the volume up and down buttons at a certain moment. Keep them in safe mode until the system boots.

In many cases, one of the above methods also works on devices from other manufacturers that we have not mentioned. Try it, experiment!

Exiting Safe Mode

Some users are also interested in how to disable safe mode on Android. This is actually much easier to do than getting into safe mode. Turning the device off and on often helps. You can also open the notification panel - there will probably be a message in it asking you to remove Safe Mode.

Click on the message and a pop-up menu should appear. There you need to click “ OK”, agreeing to end work in safe mode.

So the device will reboot, after which you will be in a completely normal mode of operation of the operating system.

On some devices from Samsung It is not possible to remove safe mode this way. When the manufacturer's logo appears on them, you need to press volume up button or the " Menu».

Many users of Android smartphones who have been using their gadgets for a long time, at some point are faced with a rather specific function of the operating system - safe mode. In this case, even a powerful smartphone includes a special procedure for launching exclusively system programs and blocks applications from external sources.

This function is similar in effect to special fuses in electronic devices that turn off the gadget if the system is in danger.

From our article you will learn the features of this function, how to enable and disable safe mode on Android if it is running by the system.

What is safe mode on an Android phone

If the user of an Android smartphone constantly launches various applications, a cache gradually accumulates in the device - residual program files that make the system difficult to operate. In addition, applications from unreliable sources may be infected with a virus or simply contain critical errors in their code, causing Android to crash.

In these cases, the self-defense function is launched - safe mode on Android. Only system and background processes are running on the phone.

By the way, one of the possible reasons for enabling security mode on Android may be that the phone is filled with a huge number of unnecessary files. You will learn what to do in this case from our article Cleaning up junk on an Android phone

How to enable safe mode on Android

In the Android settings, the user can independently enable safe mode. To do this you need:

  • Press the Power button on your phone
  • Wait for the dialog box to appear on the screen
  • Press the “Power off” item
  • Click OK

After rebooting, the system will inform you that the phone is in safe mode. In this case, the shortcuts of all third-party applications will be grayed out, and the programs themselves will be blocked.

After switching to safe mode, the user can easily remove unnecessary applications and clear the phone's memory.

In some cases, even after clearing the phone's memory, the user cannot access Google Play to download applications. You can read about how to deal with this problem in our article Google Play is not working.

You can also put your phone into safe mode using special applications. However, it is worth considering that such programs require rooting the smartphone. Remember that gaining superuser rights may disrupt the system, and in addition, a rooted phone will automatically fall out of warranty service.

How to turn off safe mode on Android

There are three main ways in which you can put your Android device into normal mode.

Method 1: Reboot

To do this, you just need to hold down the gadget’s power button and select the reboot or Reset command in the control window.

Method 2: Removing the battery

Please note that this method of disabling safe mode only applies to a smartphone with a removable battery:

  • Disconnect your device
  • Pull out the battery
  • Wait 1-2 minutes
  • Insert battery
  • Turn on your phone

Method 3: Through the Recovery menu

Disabling the security mode using the engineering menu is perhaps the most radical method, which should be resorted to only as a last resort. The fact is that after manipulating Recovery on the smartphone, all user data, files and downloaded applications are erased. In addition, Android will roll back to factory settings:

  • Restart your device
  • Wait for the Android logo to appear
  • Press and hold the power and volume up/down buttons at the same time
  • In the Recovery menu, click on Wipe data/Factory Reset
  • Wait until the system finishes processing itself
  • Click Reboot.

It is worth noting that cleaning the system through the Recovery menu only affects the internal memory of the smartphone. Therefore, before this procedure, you should transfer your contacts to a computer or laptop, and transfer applications to an SD card.

This procedure, as a rule, occurs stably and without failures. However, if you encounter an error when performing a Factory Reset, check out our article about.

So that you don’t have to rack your brains about how to remove safe mode on Android, you need to follow certain rules:

  • Install applications only through the Google Play store
  • Install a reliable antivirus program that will protect your gadget from malware.
  • Choose for yourself a powerful smartphone that can withstand maximum loads.

The last point is the easiest to accomplish - just study the Fly catalog and choose for yourself the most productive and affordable Android phone.

How do you monitor the condition of your smartphone? Tell us about it in the comments to this article or in the official group

Data-lazy-type="image" data-src="http://androidkak.ru/wp-content/uploads/2016/09/bezopasnyj-rezhim-vyhod..png 400w, http://androidkak.ru/ wp-content/uploads/2016/09/bezopasnyj-rezhim-vyhod-300x178.png 300w" sizes="(max-width: 280px) 100vw, 280px">
The Android operating system provides the widest possibilities for independently editing system files and installing third-party applications. But sometimes this turns against the user himself: a new program or changes made cause problems and failures. Especially for such cases, Android provides a Safe Mode function, the purpose of which is the same as in the Windows system: loading the device into Safe Mode launches only pre-installed programs (those that were installed by the manufacturer).

Thus, the user gets rid of a number of problems that arise as a result of downloading third-party programs or damage to the operating system itself:

  • emergence of malware
  • freezing
  • strong braking
  • fast battery drain, etc.

At the same time, safe mode makes it possible to evaluate the speed of “pure” Android, without additional graphics and applications.