Menu
homeBreakdowns

Omega T14 on-board computer. Omega on-board computer

If you are the happy owner of a Zhiguli 2109i-15, the Omega-115 on-board computer is best suited for your car. In fact, this system is not inferior to more famous and advertised ones. Although sometimes the buyer is scared off by the lack of advertising of a product as well as by its excess. A special feature of the Omega 115 on-board unit is its maximum adaptation to this particular car model. The operating instructions for the Omega 115 on-board computer promise its compatibility with controllers from the Avtel, January, and Bosch groups.

The on-board computer will automatically determine which controller your car has and recognize the version software electronics. With its help, you can remove from memory information about what gasoline the engine was running on and reset the controller data.

What do the individual functions of the function include, according to the instructions and descriptions of the positions of the Omega 115 on-board computer:

  • service mode “Clock”;
  • set of functions - “Trip computer”;
  • sound alarm;
  • “Diagnostic tester” mode;
  • maintenance notification system.

Important! The design of the Omega 115 on-board computer is designed as a reliable and convenient device, not overloaded with unnecessary, often unnecessary functions, making it easier to use and configure. Interesting solution is the presence of a demonstration of the computer's capabilities in the corresponding menu. In part, he will tell you how to configure the Omega 115 on-board computer.

Features of the Clock

The mode includes a clock, date, alarm clock with 7 polyphonic melodies, control of external contacts of the Omega 115 system. In addition, if you wish, you can go through key control points in demo mode. In this menu you can adjust the screen brightness and see the temperature sensor data.

Having installed electronic device, you won’t worry about how much gasoline is left in the tank, and whether you can get to the desired location without refueling. Taking into account your driving style, the BC will predict how many kilometers you can drive on the remaining amount of fuel.

Attention! The maximum adaptation of the on-board device of the Omega 115 system to the VAZ 2109i-15 makes it possible to control the gasoline level without calibrating the tank; it is enough to select the appropriate type of panel.

The system has the ability to determine the temperature external environment using a temperature sensor manufactured by Philips. For the convenience of working with the on-board computer, in the “Information about BC” section there is a section in which, in the demonstration mode of capabilities, you can get information about all available functions computer (Demo mode). In this mode, the Omega 115 on-board computer supplements the operating instructions. By launching the “Multi-Display” section, you can simultaneously monitor the readings of several of the parameters you most need (three modes of this function are available).

Set of functions “Trip computer”

Second useful system The Omega on-board computer allows you to plan time and route based on fuel reserves.

Among the main functions, the on-board computer has the following:

  • determines the remaining amount of gasoline (you can set the readings of the sensor or controller), and also calculates the possibilities of getting to the nearest gas station or to your destination;
  • controls fuel consumption, obtain data for each specific trip: route duration, time spent, amount of gasoline “eaten”, average speed;
  • enters into the “black box” information about the speed over the last 500 meters of the road.

In addition, Omega allows you to automatically configure the inclusion separate modes on-board computer or external devices using the alarm clock on certain time.

The alarm system will warn you if the engine is overheating using signals., about voltage exceeding permissible standards in electrical network, and will also notify you in time that you are carried away by driving and have exceeded the maximum possible speed limits stored in the memory of the on-board computer for safe driving.

Diagnostic tester

The on-board computer will replace the diagnostic tester. Using the “Diagnostics” mode, you can obtain measurements for all parameters of interest. In this mode, the computer allows you to read error codes and reset them. Visually, you can obtain information about the engine coolant temperature, mains voltage, shaft speed, engine load and the opening angle of the air damper.

Also, your assistant will make sure that the time for the next technical inspection is not missed, will tell you when it’s time to change the oil in the engine or gearbox, O necessary replacement filters, fuel and air, spark plugs, alternator belt and timing belt.

Preparing the engine for starting using the on-board unit occurs manually or automatic mode, you can select “Winter start” - in the cold season, or “Plasmer”, more often used for drying and heating the elements of the ignition system.

The Omega on-board device will ensure that the engine does not overheat; to do this, you must select the “Tropic” option, and it will control the operation of the fan cooling the engine.

For your information! It is worth noting the good design and appearance front panel, adding points to the rating increase bank trademark.

The video shows the operation of BC Omega T-10.MP4:

On-board computer Omega T14, simple and reliable to use. The display is two-line, blue or green; sound alarm - buzzer. The BC can be in two modes: “sleep” (low power consumption) or working, depending on the position of the ignition switch. In "sleep" mode, the display backlight is turned off and all main functions are locked, except the alarm clock. The display backlight turns on a short time when you press any button.

Watch:

  • TimeCalendar
  • Alarm
  • Additional Information

Trip computer:

  • Trip counters
  • Fuel consumption
  • Mileage
  • Travel time
  • average speed
  • Average consumption
  • Mileage forecast
  • Remaining fuel

Diagnostic tester

  • Viewing self-diagnosis codes of engine control systems (with interpretation) and the ability to reset them
  • Monitoring signals from sensors and actuators.
  • Resetting controller self-learning tables
  • Pre-preparation of spark plugs
  • Throttle valve opening angle - monitoring the health of the throttle position sensor - monitoring the health of the position sensor
  • throttle valve (TPZD)
  • Idle air control position.

Clearing the ECM memory is necessary in the following cases:
- when changing the type of fuel gas/gasoline for vehicles equipped with gas-cylinder equipment;
- when engine power decreases due to low-quality fuel;
- with increased fuel consumption.
Drying spark plugs (pre-start preparation of spark plugs) in difficult conditions startup (humid weather, freezing temperatures) in several
times increases the likelihood of engine starting. Can be used this function to check the functionality of the ignition system.

Maintenance:

  • It is preferable to set maintenance periods according to the manufacturer's recommendations.
  • Settings and settings:
  • The procedure for setting the current time. Setting the brightness and backlight of the display. You can make two independent settings for the display brightness: when the car's side lights are on and off.
  • Setting the threshold for turning on the engine cooling fan. The fan switch-off threshold is always 4°C less
  • Setting the threshold for turning on the manufacturer's speed alarm is similar.
  • Correction of fuel counting accuracy. Accuracy mileage calculation is done in the same way.
  • The BC constantly monitors the engine temperature and on-board voltage. If the temperature in the cooling system exceeds 110°C, and the voltage is less than 10.8 volts or more than 17 volts for a minute, then the BC signals this.
  • The BC also warns about a low fuel level in the tank, when the set speed threshold is exceeded, when a maintenance period is due, and when the side lights are on when the ignition is off.

MANUFACTURER: LLC "Automotive Electronics"

GUARANTEE: 12 months.

COMPATIBLE WITHECU: January 5.1.1, January 5.1.3, January 5.1, January VS5.1, January 7.2 (Itelma), BOSCH M1.5.4.(N), BOSCH MP 7.0 E2, BOSCH MP 7.0 E3, BOSCH 7.9.7.

DISPLAY: graphic.

PRICE: 2000 rub.

CONSUMER ANALYSIS

INSTALLATION: installation of the OMEGA GABARIT on-board (trip) computer does not cause any complications if you follow the well-written instructions. Moreover, most of the time will be spent installing the temperature sensor, which should be located under the front bumper of the car.

CONTROL: The OMEGA GABARIT on-board computer is controlled using four buttons, which are functionally divided into two groups. In the first group there is only one key, which is responsible for switching between the following parameters: clock, calendar, alarm clock, thermometer, bookmaker information, demo mode. The second group has more buttons, but not much - only three. Central took responsibility for switching between groups: trip computer, diagnostic tester, engine management system errors, deadline reminders Maintenance. Side keys respectively, are necessary to scroll through the parameters within each group.

Controlling the on-board computer is quite logical and does not cause any difficulties. For example, changing a parameter is done by simultaneously pressing two arrow keys. After the parameter value has been changed using the same keys, you must press the buttons simultaneously again so that the changes are made to the computer’s memory.

OPERATING MODES ANDFUNCTIONALITY: As mentioned above, all the functionality of the OMEGA GABARIT on-board computer is thematically divided into several groups. The following parameters are concentrated in the “Trip computer” group: remaining fuel in the tank, total fuel consumption for the trip, consumption on the trip, mileage for the trip, average consumption fuel for the trip, average speed trips, travel time, city display, highway display. In addition, this menu item provides a “black box” function, which makes it possible to demonstrate maximum speed in the last 60 seconds. Perhaps it will appeal to those who like to tickle their nerves in a dispute with traffic police officers.

In the “Diagnostic Tester” group you can monitor the values ​​of such parameters as: current vehicle speed, coolant temperature, voltage on-board network, crankshaft speed, throttle position, air mass flow, ignition timing, idle air control position, controller type and software version, instantaneous consumption fuel, setting the temperature for turning on the cooling fan. This group also includes two quite interesting modes: “Plasmer” and “Winter Launch”. The first mode carries out pre-heating of the spark plugs to facilitate engine starting when negative temperature environment. The second mode is necessary for the automatic activation of the “Plasmer” function after turning on the ignition. In addition, in this mode, the cooling system fan is switched on briefly, which is necessary to warm up the electrolyte in the battery. The latter, in turn, will greatly facilitate engine starting.