Zyxel keenetic 2 forgot password. Resetting the ZyXEL router: instructions and tips

Resetting a router is a function that returns the router to the settings that were set in it at the factory. In other words, the router is returned to its factory settings. Typically, this procedure is performed when the router is not operating correctly. Also, a reset may be required if the user cannot. If you find yourself in a similar situation, then this article will definitely be useful to you. Here you can learn how to reset your router.

There are two ways to reset settings: software and hardware. A soft reset is a return to factory settings using a special function in the router’s web interface. This method can be used if there are problems with the router. But, if you have forgotten your password to log into the web interface, you will not be able to use the soft reset. In this case, you will have to resort to a hard reset. A hard reset is performed using a special button located on the back panel of the router. In this article we will look at both methods, but we will start with software, as it is much simpler.

How to reset a D-Link DIR router

If you have a D-Link DIR router, then in order to reset the router settings using the software method, you need to log into the web interface (on such routers it is usually available at 192.168.0.1) and go to the “Maintenance” section (Tools)". Then in the side menu you need to select the “Save and Restore (SYSTEM)” subsection. After this, a web interface page will open in front of you, where you can save, load or restore the router settings. In order to reset the settings to factory settings, click on the “Restore device” button, which is located at the very bottom of the page.

How to reset a TP-LINK router

Users of TP-LINK routers, in order to reset the settings, need to follow these steps. Open the web interface (a 192.168.1.1 or 192.168.0.1) and go to the “System Tools” section (in the Russian interface this section is called “System Tools”). After this, an additional menu will open in which you need to select the “Factory Defaults” section (in the Russian interface “Factory settings”). Next, you should see a page with a “Restore” button (in the Russian interface “Restore”). Click on this button and the router will reset its settings.

On ZyXEL routers, resetting settings is performed as follows. Open the web interface and go to the “System” section. After this, open the “Configuration” subsection from the drop-down menu. Now you should see a page for managing your router settings. Here you can save, restore or reset settings. To reset the settings on your ZyXEL router, simply click on the “Reset” button.

In order to reset the password on an Asus router, you need to open the web interface (on Asus routers the IP address 192.168.1.1 is most often used) and go to the “Administration” section. After that, you need to open the “Management” tab. Now you should see a page where you can restore, save or reset factory settings. Please note there is a bit of confusion here, the button to restore settings from a file is called "Submit" and the button to restore factory settings is called "Restore". Since we need to restore factory settings, to do this we need to click on the “Restore” button.

How to reset settings using a button

If you do not have access to the web interface of your router (for example, you have forgotten the password), then you can always reset the settings using hardware, that is, using the button on the back panel.

The procedure for resetting settings using a button may differ depending on the router model. Therefore, before doing anything, it is better to read the instructions for your router model. But, in general, resetting settings looks something like this:

1. Turn off the power to your router and also disconnect all network and cables;
2. Connect the router to a power outlet and wait until it boots up (usually 2-3 minutes is enough);
3. Using a paperclip or other thin object, press the RESET button on the back of the device and hold it down for about 15 seconds. After the router blinks the indicators, you can release the button.

After these manipulations, the router will load the factory settings and reboot. After the next reboot, you can connect network cables and use the router as usual.

The most convenient way to use the Internet is wireless mode. It may not always be stable, but in terms of convenience it takes a well-deserved first place. Wireless Internet is provided to us by routers. They divide one Internet access into dozens and even hundreds of channels.

One of these routers is Zyxel Keenetic 4G. The Zyxel company has gained great popularity and received recognition in the market. They have routers in a variety of price ranges that may appeal to many.

Sometimes there is a situation when you just installed a new Wifi key on the Zyxel router, went to a cafe or to work, you come home, try to connect, but the router does not reciprocate. In this case, there are two development options:

1. Remember)).

2. Try to change a forgotten or lost password.

Since we are unable to help with the first option, we will immediately consider the second case. So, how to change the password on the Zyxel Keenetic router.

Reset

If you only forgot your WiFI password, you can use one trick. Connect your PC to the router directly via a LAN cable. Now you can log into the admin panel of the router.

Go to the address 192.168.1.1 or 192.168.0.1. This is done in a regular browser. Next, enter login and password. If you haven’t changed it, then by standard this “admin” is both a login and a key. Or maybe “admin” is the login, but “1234” is the default password in Zyxel Keenetic.

Go to “Wi-Fi Network”, look for “Key” in one of the items there, this is the password. Here you can both recognize it and change it. Before you change the password on your WIFI router, write it down somewhere. We change it to one that you can remember.

from the router admin panel. Then, before going into the router settings, you will have to reset everything, otherwise changing the password on the Zyxel Keenetic router will not work. Using a thin object, press on the hole located on the back panel. Hold the button for 10 seconds. This is how we reset the settings to factory settings.

Now you will have to configure your router again, but you will have access to the admin panel. Login and password became the same as they were by default at the factory. We discussed setting up the router itself from scratch in. Now let's look at the process of setting a password on WI-Fi and how to change it.

We go to our admin panel at 192.168.1.1 to change the key. Enter your username and password to log in. There is a list on the left, select the “Wi-Fi” network there, and then “Security”. In the “Network key” field you must put the password that you will not forget)). It must be more than 8 characters. Authentication must comply with WPA2-PSK. Click “Apply”.

Why might the key not fit if you definitely haven’t forgotten it? This rarely happens, but hacking is quite possible. Some hackers are able to constantly break your network just by connecting to it once. This is done via WPS. Therefore, we advise you to disable this function on your routers. Another problem may be in the firmware, if it is damaged, for example. Then you need to reset the settings to the default ones. And after that you need your own device.

Now you have figured out how to change your password. It’s better not to return to such procedures again; always write it down in some kind of notebook. And it’s even better if it’s some kind of small sign, so that you don’t have to dictate to the guests every time.

Video on the topic

Happy Internet to you!

Almost every middle-income family now has a personal computer. Some people, in addition to their main machine, also have a laptop, tablet and other devices that have access to the Internet. So why not combine them all into a single network?! And here you cannot do without special equipment - a router. Among all models, Zyxel Keenetic is very popular. However, in order to set up a home network, you need to solve the main problem - how to enter the settings of the Zyxel router.

For most beginners, this can be a real problem. Any specialist will set everything up in a matter of minutes, but for an ignorant user it may take more than one day. To understand this matter, you should first familiarize yourself with the features of new router models.

Advantages of the router

A large Chinese manufacturer, whose name is pronounced “zayxel” in Russian, presented to users, in addition to the main Zyxel Keenetic series, a line of network equipment:

• Lite.
• Giga 1 and 2.
• Start.
• Omni.
• Ultra.

All models differ from each other in the number of LAN ports, antennas and other characteristics. As many users note, when deciding how to enter the settings of the Zyxel router, the router from the Chinese company has proven itself to be good. Moreover, the entire series, and not just one model, can boast of good performance.

All equipment supports Link Duo technology, which allows connection not only to the World Wide Web, but also between local network servers. This is the scheme used by the Cybernet. Internet access is provided using PPPoE dedicated virtual channel technology. At the same time, subscribers have the opportunity to visit local resources at a speed of about 100 Mbit/s. A separate one is provided for this. so-called. “private” channel with a range of IP addresses starting from 10.0.0.1 and ending with 10.0.255.255.

Specifications

In terms of its technical parameters, the router is more like an entire multifunctional communication center. Zyxel? Nothing could be easier! With its help, you can connect not only wired, but also wireless devices that must support the WPS format. There are no particular problems with this, since many such devices have this support.

But what is most valuable is the speed - 1 Gbps (wired connection) and 300 Mbps (Wi-Fi). If necessary, you can create something like a network storage or FTP server from the router. Or distribute something via torrent. For this purpose, the router has two USB 2.0 ports for connecting to a flash drive or hard drive.

The Zyxel series includes both complex devices and simple devices. Therefore, any user will be able to choose an option according to their preferences.

Connecting a router

To create a home or local working network, you must connect the equipment via an Ethernet network cable. In this case, solving the question of how to enter the settings of the Zyxel router is much simpler. Wi-Fi technology will not allow for poor router configuration, and then there will be no Internet on the devices. A wire must go to it from each computer, including the main one, through which the main Internet channel is transmitted.

Typically, many models have at least 4 LAN ports, and one twisted pair cable is included in the package. This will allow you to connect only one machine through the router. If you need to connect several devices to the router, you will need to purchase the required number of network cables.

In this case, the main wire, which is usually connected directly to the PC’s network card, must be connected to the socket of the WAN router. Depending on the model, the connection point may be labeled as “Internet” or “INTERNET” in Russian. Now all that remains is to turn on the power supply - on the case, if the cables are connected, the LEDs will start blinking. The next step in solving the problem of how to enter the settings of the Zyxel Keenetic router will be a small adjustment of the operating system (OS) of the main PC.

A little tweak to Windows OS

This is necessary so that the operating system can detect the IP address of the network equipment. In particular, you need to configure the PC network adapter. Since Windows XP is no longer supported by Microsoft, many users have Windows 7, 8 or later installed on their desktop computers or laptops. Therefore, let’s look at the setup using OS data as an example.

The first step is through the Start menu. If “Category” is selected next to “View”, then you must first select the “Network and Internet” link, and then “Network and Sharing Center”.

A window will appear in which on the left side there will be a link “Change settings”, which is what you need. How to go into the settings of the Zyxel Keenetic Lite router next? After following the link, you will see the Internet icon. You should right-click on it, and when the context menu appears, you need the properties item. Next, double-click LMB on version 4." Another window will open in which you need to select "Automatic method for obtaining an IP and DNS address", after which you will need to click the OK button. This completes the configuration of the network adapter.

Need an address

The router is configured using the browser web interface, for which you need to know the IP address of the network equipment. It is usually indicated in the documentation for the router, but there is also one sure way - through the command line. This is done through the Start menu or using the Win + R keys. After opening the window, enter the CMD command and press the OK button.

This is necessary to then go into the settings of the Zyxel Keenetic 2 router. As soon as another window opens, enter another command - ipconfig / all and press the Enter key. Detailed OS network parameters will appear before your eyes. Of these, the most interesting line is “Main gateway”, which contains the required IP value.

In most cases this is:

• 192.168.1.1;
• 192.168.0.1.

Therefore, you should first enter these two values ​​in turn, and if there is no result, then only then use the method described above. It may not be needed at all.

Reset

If all else fails, you can use the function of resetting the equipment to factory settings. For such purposes, manufacturers have provided a special button, which is located on the body of the device. True, it is located in a hard-to-reach place, and to get to it you will need a thin object. A knitting needle or awl will do just fine.

Apparently, this was done out of precaution, since in the process of solving the question of how to enter the settings of the Zyxel Keenetic Giga 2 router, the reset button is inevitably pressed. In this case, you have to make the settings from the beginning each time.

Web interface

Further manipulations will already be performed in the browser, in which you need to enter the already known IP of the router.

After this, a window will appear asking you to enter your username and password. As a rule, these are admin and 1234, respectively. Next, you will be prompted to change the password, which is better to use for security. Depending on the router series, the web interface in the browser may differ, but the setup itself is the same for all devices.

You should look for everything connected to the network. As a rule, these are tabs where it is written: “Internet”, then all that remains is to select a connection. In other models, you will need the PPPoE/VPN section to enter the settings of the Zyxel Keenetic Start router. Alternatively, you can perform a quick setup, but it is better to do everything manually. The main settings sections that are needed:

1. Type (protocol) - select one of the connection methods:

• IPoE.
• PPPoE.
• PPTP.
• L2TP.

1. Connect via... - regardless of the first point, you should select Broadband connection (ISP).
2. Username - provided by the provider, so you should look for it in the contract.
3. The password is also issued upon connection and it is also advisable to replace it with your own combination of letters and numbers.
4. Configuring IP parameters - select the automatic option.

As for the "Service Name", "Hub Name" and "Description" fields, they are filled in if required by the provider.

Opinion of ordinary users

There are quite a lot of reviews on the network regarding the operation of the Zyxel Keenetic router. Most of them are more positive than negative. There are opposing opinions from some people whose Wi-Fi connection was unstable. It is worth noting that other wireless networks can seriously interfere with the router’s Wi-Fi transmitter, which is reflected in a reduction in communication range. It also matters where the dispensing device and the wall material are located.

As a conclusion

The problem that exists for many beginners is how to enter the settings of the Zyxel Keenetic Omni router or any other series, not so difficult. And usually all the necessary information can be found in the documentation for the network equipment, which is included in the delivery kit. However, it is not always written in Russian, and sometimes problems arise if the router was taken from the hands of friends, acquaintances, or through an advertisement. In this case, the attached documents are usually not found. Then the information presented above will come in handy.

In this connection, it is better to purchase equipment in a computer store, where in most cases there will be not only Russian documentation, but also a guarantee.

Views: 1554 If you have somehow configured your Zyxel Keenetic router incorrectly, or the router is unstable, then you can reset the settings to factory settings. In this article we will look at two ways in which you can reset settings on Zyxel Keenetic routers: using a special

If you somehow configured your Zyxel Keenetic router incorrectly, or the router is unstable, then you can reset the settings to factory settings. In this article we will look at two ways in which you can reset settings on Zyxel Keenetic routers: using a special Reset button, and through the control panel. In fact, this is a very useful function that often comes in handy when using any router, not just Zyxel.

I myself often reset routers, especially during the setup process. When something doesn’t work out, I just reset it and start the setup again. And also, restoring parameters will definitely come in handy in the event that you have forgotten the password for your router. More precisely, the password to enter the settings.

Hardware and software reset on Zyxel

The easiest way to reset is to press and hold the button for 10 seconds RESET (Reset) on your Zyxel Keenetic router.

Reset will completely clear all parameters. You will need to reconfigure your router. Set the parameters for connecting to the provider, configure the Wi-Fi network, etc. You can set it up using the example of setting up the ZyXEL Keenetic Start router.

After this, all settings will be restored to factory settings. Button Reset It is recessed into the router body, so you need to press it with something sharp. Press and hold for about 10 seconds, the router's power should be turned on.

The power indicator should blink actively and the router will reboot. This means that the settings have been restored.

Soft reset (via control panel)

Go to the settings, if you don’t know how, then see the instructions. Go to the tab System, and select from above Parameters. Click on the button Return to factory settings.

A warning will appear that all settings will be deleted and all that. Click Yes.

We wait until the router reboots.

That's all, the settings are reset. As you can see, nothing complicated. If you still have any questions, ask them in the comments.

After purchasing a router, the first thing you need to worry about is reliable protection. This will help avoid not only unauthorized access to your personal traffic, but also violation of privacy rights. Replacement will not take much time, but will provide reliable protection.

Why a password?

A combination of letters and numbers helps limit access to the router. The procedure is necessary to preserve traffic and confidentiality. This is especially true for devices with built-in Wi-Fi.

If a user notices a decrease in speed, this may be a sign of an outside connection to your network. Flashing lights without using traffic indicates that someone else is using the equipment unfairly.

Wi-Fi without proper encryption can become a direct channel to access information on your computer. An experienced hacker can easily take advantage of this loophole and steal the data he needs or find out secrets that are important to you. To prevent this from happening, you need to take certain protective measures.

Any connected user accesses the network under your IP address. If he commits any illegal actions, law enforcement officers will have claims against the owner of the device.

A reliable combination will protect you from such problems.

Login to settings

To enter the settings we will use the web interface. To do this, you need to enter in the browser line: 192.168.1.1. Factory combination -1234, name - admin.

If nothing happens when you enter the data or an authorization error appears, you need to turn the router over and find the Reset button on the back panel. Press and hold for 10 seconds. After this, all settings will be returned to their default values.

After logging in, system information about the device will appear on the screen. There will be tabs on the right. With their help, the operation of the router is controlled and the necessary parameters are entered.

In addition to changing the password in the menu, you can additionally perform the following actions:

To exit the settings, just close the web page. After making changes, you must click the “Apply” button and they will take effect.

How to change the password on the Zyxel Keenetic router?

In the web interface, you need to find the “System” tab and enter a new combination in the appropriate window. Duplicate the same numbers in the field below. Save the data with the Apply key. The changes made will allow you to use the Internet center alone.

What to do if you forgot your password?

The easiest way is to use the Reset button and restore factory settings.

If there is no key or it does not work, there is another way, consisting of the following steps:

1. connect the device to the computer via a COM port;
2. enable the terminal program (data bits - 8, speed - 9600 bps, stop bits - 1, fairness - negative, flow control - negative);
3. connect the device;
4. enter Debug mode (there will be a corresponding message);
5. type ATSH command;
6. download the firmware for Zyxel Keenetic on the website;
7. unpack the archive and find the rom file, enter the ATLC command to start recording.

If you are using the HyperTerminal program, in the transfer menu, select Send file via Xmodem protocol. Click "Browse" and find the rom file, upload it. The ATGO command will reboot the machine.

Video: Connecting and setting up a ZyXel router

Changing the Wi-fi password

To regulate access to a Wi-Fi point, you need to select the “Security” tab.

In the tab when changing the cipher, you must set the following parameters: