Reset your phone completely. Why do you need to reset settings? The device models and their hardware keys are listed below

If your Android-based smartphone begins to glitch and freeze, do not rush to take it to a service center or perform warranty repairs. Perhaps this problem can be solved with a banal hard reset. In this case, all system settings will be restored to factory settings, and all contacts, installed applications, messages, etc. will also be deleted.

What is a hard reset and why is it needed?

A complete reset of Android settings to factory defaults is called a hard reset. It is recommended to do this if the smartphone does not work stably (it often freezes, glitches, etc.). It can be done in three different ways, each of which will now be discussed. Before starting a hard reset, do not forget to back up all your data.

You can make a complete copy of all smartphone data using the program.

Android software reset method

It consists of using a standard function that is in the settings of any Android system. To use it, you need to go to “Settings”, then select “Backup and reset” and click “Reset settings”. After this, a warning will be displayed about deleting all existing data, and at the bottom there will be a confirmation button “Reset phone settings”.

You need to confirm the selected action by clicking the “Erase everything” button.
In some older versions of Android below version 2.1, finding the factory reset may be slightly different. It could be found in the “Privacy” - “Data Reset” section.

Method without applying settings, using code

To do this, dial *2767*3855# in the number entry menu. This will lead to an immediate, complete restoration of the smartphone’s settings without any additional confirmation from the user.

Resetting Android settings when the smartphone does not respond

Sometimes there are cases when the gadget does not respond to any commands. In this case, you may need the third reset method. When you turn on Android, simultaneously hold down three buttons: “Power”, “Home” and “Volume Down”. This combination should be held until the “ ” mode appears. In it, select the “Wipe” section (which means a complete reset) and confirm your choice by pressing the “Home” button.

After a hard reset, you may be tempted to restore your Android from a backup. However, this should be done with great caution - after all, perhaps the problem that caused the problem lay in previous settings or in one of the installed applications. Therefore, it is better not to take risks, but to set up your smartphone as new by entering your Google account information. After this, contacts, mails, etc. will be synchronized with your smartphone. You can install the necessary applications yourself from PlayMarketa.

Fans of alternative firmware for Android should remember that a full reset does not affect areas that store installed additional firmware. This means that any mods and changes to the operating system software will not be deleted from the phone's memory. A similar fact should be taken into account if a complete restoration is performed, for example, in order to return the gadget under warranty.

In addition, a full reset does not affect the contents of the memory card. You will have to delete the information from it yourself. However, remember that any deletion with the “Delete” command is easily reversible, and if there is confidential data, it is better to take additional care of the card.

Want to know how to do a hard reset on Android? You've come to the right place. Sometimes tablets and phones running the Android operating system malfunction. And the owner of the device decides to reset the settings on Android to return his smartphone or tablet computer to factory settings. It is often necessary to reset settings on Android due to an application error or if the operating system has been infected by a virus (for example, resetting settings can help if a banner virus has entered Android and is blocking the screen). Perhaps a similar situation occurred with your gadget or you simply want to delete all information from the internal memory of your tablet or phone.

Various factors can cause a system failure. This may be the general clutter of Android due to frequent reinstallation of applications and installation of a large number of programs and games on the internal memory and memory card. Or, which in general happens quite rarely without third-party intervention, it could be an internal system error. Such critical errors can occur due to interference with the structure of the operating system. And even if you did nothing, critical damage in Android could be caused by malicious software or a game that you downloaded from an unreliable source. It is for such situations that you need a hard reset on Android. We will now explain what this is.

What is a factory reset on Android?

In addition to problems with the operating system, the tablet computer or phone may not turn on at all. If the gadget slows down, freezes or is unstable, then a hard reboot of Android can also help. As the name implies, a Hard Reset is a hard reboot of the entire system. But what exactly is being rebooted and what is being reset on the phone or tablet? It’s worth clarifying here that there are two types of factory reset on Android tablets and smartphones. You can reset the system settings using software and hardware methods. And these methods have differences.

On some firmware, during a soft reset, you can select the desired removal options. In this case, all information is deleted from the memory card and internal memory of the Android operating system. When performing a hard reset through a special menu on your phone or tablet, Android System Recovery, there are no such options, so SMS messages, phone contacts, applications and games may be saved. However, before you do a software or hardware reset of Android to factory settings, we still recommend, if possible, making a backup of the data that is important to you and saving it. As a result of the reset, the following data will most likely be lost: installed applications and games, your Google account and all data associated with other accounts, your personal data (contacts, SMS messages, calendar notes), data about setting up the system and applications.

If you want to reset the settings to return the old firmware of the device, then we have to disappoint you. Neither hardware nor software resets will help restore the old firmware. It can only be restored by manually flashing the gadget. For those who have forgotten the digital or graphic access code to the system, we have good news. Hard reset should help in this situation and unlock Android. Next, we will look at both ways to reset Android settings and start with the simpler one, soft reboot the system.

How to soft reset settings on Android

If your tablet computer or phone boots, it is easier to do a soft reset to factory settings than to call up the hardware system recovery menu. To perform a soft reset on Android, you need to enter the menu of your smartphone or tablet.

Once you get to the device menu, find the settings shortcut and click on it.

In the settings you need to find the ‘Accounts’ menu item or the ‘Personal data’ option (depending on the firmware of your phone or tablet). And after that, select the menu item ‘Restore and reset’ or another name of which may be ‘Backup and reset’.

Next you need to find the ‘Reset settings’ menu item (it may also be called ‘Data reset’). As you can see from the explanation in the picture below, all parameters will be reset and all data on the device will be deleted.

By going to the data reset menu item, you can reset the device to Android factory settings. Again we draw your attention to the annotation. All information will be deleted from the device’s memory, including your Google account (this does not mean that it cannot be returned later), system and application data and settings, as well as downloaded applications: music, photos, other user data, decryption key files on the SD memory card (after resetting the device, you will not be able to use encrypted files on the SD memory card).

After clicking on the device reset button, Android will ask for confirmation ‘Do you want to delete all personal data and downloaded applications? It will be impossible to restore them in order to finally reset the operating system settings.

By clicking on ‘Delete everything’ (or on ‘Erase everything’) you will begin the procedure for resetting Android settings. In principle, this is where the description of a soft reboot of the system can be completed. Let's move on to the hardware hard reset.

Hardware Hard Reset on Android

If your phone or tablet does not turn on or start, then the reason may be a software failure of Android, and not a hardware malfunction of the device. It is for this purpose that the developers have implemented a special system menu, which can be called up by pressing buttons on the gadget. Unfortunately, there is one pitfall. As you probably know, tablet computers and smartphones for Android are produced by many manufacturers: ASUS, Acer, Alcatel, Dell, Digma, Explay, HTC, Huawei, LG, Lenovo (Lenovo), PiPO, Philips (Philips), Prestigio (Prestigio), Samsung (Samsung) or Sony (Sony) are just some of them.

Therefore, it is somewhat unrealistic to write instructions on how to reset settings for all of them within one article (if you need to know how to reset settings for a specific model, ask a question in the comments). However, we will try to cover several manufacturers of Android gadgets and make our instructions universal. Although manufacturers each go their own way, there is a certain pattern in launching the Android System Recovery menu. For most devices, the following button combinations and subsequent menu calls are suitable. You need to turn off the device. We advise you to charge the device before entering the menu if it is very discharged.

1. To enter a reset, press and hold the volume up button (or volume down key) and the power button. Or we do the same thing, but after pressing the power button we continue to hold the volume key.
2. The second option is similar to the first, you need to press and hold volume down and up, and then just press the device’s power key.
3. The third option for launching the recovery menu is to press three keys at the same time: the home screen button, volume up, and the power key.
4. The fourth is similar to the third option: you need to press the ‘Home’ button and volume down at the same time, then press the power key, wait for the manufacturer’s logo to appear and release the power button. After the Android icon appears, you can release the remaining two keys and wait for the recovery menu.
5. Last option. Press the power button and hold for 1-2 seconds, then hold down the volume up and down buttons and the power key, and hold until the recovery menu appears.

After this, the device will either simply reboot and reset automatically, or the recovery menu will appear. After you get to the recovery menu, you need to select the Wipe data/Factory reset item using the volume down and up keys, click on it and agree to delete the settings on your phone/tablet.

Now let's look at several gadget manufacturers separately. Let's start with a description of how to hardware reset settings on Android smartphones and tablets from the company Samsung. Turn off the device. To enter the recovery menu, you need to simultaneously press three keys: the button to call the main screen of the device, volume up and the power key. Resetting the settings is carried out using the Wipe data/Factory reset item, which can be selected using the volume up and down buttons. Next, we agree to erase the data and reboot the device using the ‘Reboot now’ menu item.

On phones from HTC The settings are reset as follows. Turn off the device. To get to the recovery menu, press and hold the volume down and volume up buttons and simply press the power button on the smartphone. We wait for the inscription 'Warning' while holding the volume buttons. After the message appears, you need to press the volume up button to reset the settings. An alternative option is to press and hold the volume down key, then you need to hold down the device’s power button and wait for the Android icon. After the Android logo appears, release the power and volume down buttons, and press volume down again. Select the option ‘Restore original settings’ and press the button to turn off the gadget.

On devices from the company Acer The reset procedure looks like this. Turn off the device. For smartphones: press and hold the volume up and power keys. After a menu appears where you need to select Recovery Mode and press the volume down button. Next, the logo of a lying Android with a red triangle on its stomach should appear. After it appears, you need to press the power button of the device. After this, Android System Recovery will load, where we select the ‘Wipe data/Factory reset’ option and agree to erase the settings. For tablets, things are a little different. You need to switch the display lock lever to the left position. Then press the Volume Up and Power buttons at the same time and hold them down. The tablet should vibrate. After this, you need to change the position of the screen lock lever left/right so that the lines ‘Erasing Userdata’ and ‘Erasing Cache’ appear on the screen. Actually, these lines mean that the deletion of settings has begun.

Now let's figure out how settings are reset on devices from Asus (Asus). Turn off the device. In order to do a hard reset for Android on Asus and get into Android System Recovery, you need to hold down the volume down button and then press the power key for three seconds. After that, release the power button and hold the volume down key until the recovery menu appears. In the menu that appears, you need to select Enter recovery mode, then Wipe data/Factory reset and confirm deleting the data. After completing the reset procedure, you need to reboot the gadget using the ‘Reboot system now’ menu item.

On gadgets from the company Sony (Sony) Resetting Android to factory settings is done as follows. You need to connect the device to charging and make sure that the indicator lights up. Next, you need to restart the gadget using a paperclip by pressing the paperclip into the hole located on the body and called ‘Reset’. The display should go dark. Press the power key for three seconds, after which you need to press the volume up button several times until Android loads. Next, in the Recovery menu, select ‘hard reset’ and erase the settings. After completing the reset procedure, reboot the device. An alternative option for loading the recovery menu: hold down the power and volume up keys. When the device screen lights up, release the power button and hold down the volume up and down buttons. After which the recovery menu should appear.

Here's how to reset settings on Android in devices from the manufacturer Alcatel. Turn off the device. Press the volume up and power buttons simultaneously. After this, the Android System Recovery menu should appear, in which you need to use the volume keys to select ‘Wipe data/Factory reset’ and agree to erase system settings by pressing the power button. Then reboot the device using the ‘Reboot system now’ item.

As you can see, the reset methods for different manufacturers are similar. We hope you were able to go to the recovery menu and reset your Android settings. If you have a question about a specific phone or tablet model, and you don’t know how to reset to factory settings yourself, ask a question in the comments.

Quite often there is a need to reset your Android phone. This procedure is quite simple. Just tap on the screen of your smartphone a couple of times. Despite this, many users do not know how to reset Android settings to factory settings. If you belong to this category of people, then this article is for you. In it we will lift the veil of secrecy and tell you how to remove the settings.

A factory reset or Factory Reset is a process during which all information is deleted from a smartphone or tablet. The phone is cleared of photos, video files, audio recordings, etc. Since all user data is deleted from the smartphone, the device returns to its original form. That is, the phone will return to the state it had before purchase (i.e. factory state).

As a rule, restoring factory settings does not roll back the operating system. That is, Factory Reset does not affect the Android version. It is also worth noting that when resetting the settings, only those data that are on the internal memory of the device can be uninstalled. That is, the information from the SIM card or SD remains unharmed.

Why do you need to reset settings?

There are a number of reasons why people perform a factory reset. Here are the most common:

• Problems with the device. When using a gadget for a long time, cache, temporary files, and other junk accumulate in the memory. Because of this, the system begins to constantly slow down. In this case, Factory Reset is a real lifesaver. By resetting the settings, you can solve most problems that relate to performance and correct operation of the device.
• There is no way to remove the screen lock. Many users set a pattern or password on their smartphone. This is a completely reasonable measure to protect your device from strangers. However, sometimes the combination for just slips out of your head. Resetting Android settings can solve this problem.
• Preparing the device for sale. Everything here is extremely simple. You don't want anyone to have access to your personal data. And it’s probably unpleasant for the buyer that the phone is full of unnecessary contacts and messages.

Preparation

Before performing a reset, you need to prepare. To do this, follow the following instructions:

1. Check your phone carefully for information that is important to you. It's better to transfer all photos, videos and music to your computer. If you do not have access to a PC, then simply transfer valuable information to cloud storage.
2. Make sure your phone is fully charged. Some smartphones, if the battery is low, will not allow you to activate the Factory Reset function. And this is the best possible outcome. If the phone does reset and the battery runs out during this procedure, this can lead to unexpected consequences, including the breakdown of the device.
3. If your smartphone or tablet has OS version 5.1 or higher, then before resetting the settings on Android you need to delete your Google account. The fact is that the company has a new policy regarding security issues. The system is designed to protect phones from theft and subsequent resale. The essence of the innovation is as follows: before turning on the smartphone after Factory Reset, you must enter the last user's data. Otherwise, the phone simply will not start. Access will only be available through the service center. And even then only if you have documents for the purchase.

How to perform a Factory Reset

How to reset Android to factory settings? There are several ways to do this:

• Use “Settings”;
• Activate the Recovery menu;
• Use the built-in reset button;
• Apply service code.

Each of the listed methods is suitable for a particular situation. For example, if you need to clean your gadget of debris, then it is better to reset the system through “Settings”. If you cannot turn on your phone, then you need to use Recovery. Let's consider each of the above methods in more detail.

Settings menu

The easiest way to return to factory settings is to launch a restore through the standard “Settings” menu. However, you can use this method only when you have access to the system. To return all factory settings you just need to:

Recovery menu

Sometimes the phone is in such a state that it is not possible to use its system resources. For example, the device does not turn on or begins to freeze during startup. What to do in this case? The only way to reset system parameters is to use the so-called Recovery menu.

What is Recovery? In fact, this is a kind of analogue of BIOS in computers. Recovery is special software that is located outside the operating system. This software is installed on smartphones by default. Its main purpose is to diagnose hardware, create backup copies and restore the system. We are interested in the latter.

The first thing you need to do is enter the Recovery menu. You need to turn off your device (the buttons should go out). Then you need to press and hold a specific key combination for several seconds. Which one exactly? It all depends on the manufacturing company. The most common combination that is suitable for most smartphones: Volume Down + Power. That is, you need to simultaneously hold down the volume down button and the power button of the device.

On devices from LG you can often find the following combo: Power + Home + Volume Up. You must simultaneously hold down the phone activation, volume up and “Home” buttons (located under the screen). You must hold the keys until the company logo appears on the display. When this happens, release the button responsible for turning on the smartphone. Do not release the remaining keys for 10-15 seconds.

LG devices also have their own combination for calling the Recovery Menu: Power + Volume Down. Immediately you need to hold down the power button and volume down button. As soon as the LG logo appears on the screen, you need to release the keys and press “Power” again.

Working with Recovery Menu

After carrying out the above manipulations, you must go to the Recovery menu. You can navigate through it using the volume control buttons. To confirm the action, you must use the Power or Home button. If Recovery supports a sensor, then you can control the program using taps.

How to do a full reset on Android via Recovery? In the list provided, you need to find the Factory Reset option. On some devices this item may be called Clear eMMC. Click on it, after which the program will ask for confirmation - select the affirmative option yes. The program resets the system to its initial settings. After completing this procedure, you need to click on Reboot System Now to reboot the device.

Restoring branded settings through the Recovery Menu is a fairly simple task that even a child can handle. Difficulties may arise if the names of the items are different. However, these are minor things. The meaning of this or that item can be understood even with minimal knowledge of the English language. In general, the process of erasing user settings is the same for all devices that run on the Android operating system.

Built-in reset button

Some manufacturers make a separate button on their gadgets, which is designed to reset user parameters. It is made in the form of a small hole in the body. To activate the reset, just hold down this key for a couple of seconds with some object.

Service code

You can demolish the system without even going to Settings. It is enough to activate the dialing panel and enter one of the service codes there. Here are just a few of them:

Whether the code will work or not depends on the manufacturer. If none of the above combinations worked, then try sending her to the “Emergency Call”.

In this instruction, we will tell you how to reset an Android-based smartphone to factory settings, and also dwell on the question of how to properly prepare the gadget and save all the necessary information before accidentally deleting it.

What is an Android reset and why is it done?

Many of us have encountered the problem of constant device freezes, firmware glitches, loss of communication, etc. To get rid of such difficulties, resetting the gadget to factory settings on Android comes to the rescue. What does this mean? Resetting the device settings allows you to restore the factory firmware characteristics, which subsequently has a positive effect on the device’s performance and the absence of additional “Glitches”.

What files and data should be saved first before resetting the settings?

There are a huge number of ways to reset Android to factory settings, but the only thing they have in common is the total deletion of all files and data from the device’s memory. Therefore, you should take care in advance of important media files and contact information, notes and other documents that you would like to save. How to do this correctly, read on.

Correct backup of contacts and notebook for Android

Let's start with pre-saving and transferring contacts, “where further away” from our gadget. The easiest way is to copy your contacts to a SIM card. This is easy to do by following our instructions. Go to the contacts menu and select “Import/Export”. In the window that appears, export contacts to any medium convenient for you: SIM card or SD storage device.

The most reliable way is to copy your contacts into a notebook, but, in our “outside” era of technology and gadgets, this option is not suitable for everyone. We recommend using an effective and efficient method for backing up contacts on Android - synchronizing the data with your Google account or its cloud storage. In addition to contacts, the cloud storage service offers you to synchronize SMS messages, notes and calendar entries from any Android device.

To get started, you should register with the Google service, simply create a new account or log in to the old one. We will not talk about this in detail, since such simple actions do not need comments. We will tell you about the correct synchronization of the necessary information with Google servers.

Go to the phone settings, section “Accounts”. Select Google accounts. There will be several items in the window that opens

Security and entry;

Confidentiality;

Account setup;

Your account (Google account) will appear in the upper corner of the device screen, tap on it.

After completing the steps, a window will appear offering synchronization options. We check the boxes next to the items we need. If you want to manually backup data to the Google server, click on the circular black arrows, as shown in the screenshot.

Congratulations! The necessary information and data have been uploaded to the Google server and synchronized with your account. After resetting your device, it will not be difficult for you to restore your smartphone’s notebook or notes.

We make quick backups of photos, videos, music and documents on Android.

A simple way is to connect the device via a USB cable to your computer and transfer the necessary information to it. There is a small nuance - not all phones synchronize with a PC in “Flash drive” mode. When connecting the gadget to the computer, select the “Use as USB drive” mode.

The second way to backup the necessary files is to transfer them from the device memory to a flash card. Open File Manager.

In the manager window, select photos that are in the phone's memory. The SD card is displayed in a different location (sdcard1).

Mark the photos that need to be transferred to the flash drive (press your finger on the desired file until a check mark appears).

In the upper right corner there is a “Menu” button. If you need to select multiple files, click Select All so you don't have to waste time selecting each photo. In the next step, tap on the “Move” item and specify the SD card as the end point for the location of your files. To avoid confusion, you can create an additional folder by clicking (+) and save the data in it.

Do the same with videos, music and documents if these files are important to you.

The third way to save data on Andorid before resetting its settings is to use cloud storage. The algorithm of actions is no different from the previous point, all you need to do is download additional applications from the play market: Google Drive, Yandex Drive, etc. We advise you to use Google Drive, because... it is automatically synchronized with your account data after resetting the settings on the gadget.

Go to Google Drive, click “+” and select “Download”.

Mark the images and folder for uploading to cloud storage. Do the described actions with the rest of the media data.

Detailed instructions for resetting Android settings to factory settings

The first and easiest way to reset the settings is to use the standard phone menu, because... the device itself will tell you what to do. First, you should go to the smartphone menu and find the “Settings” section. As a rule, this is “Gear”.

Advice! Experienced users can say that on each Android device, step-by-step reset of settings differs in algorithm and sequence of actions. Actually this is not true. “Stock” or “Standard Android” does not differ in the strategy for resetting settings and data.

We find in “Settings”, the item “Backup and Reset”. Select “Reset phone settings” - “Erase Everything”.

For example, if you have a Samsung smartphone, instead of the “Recovery” menu item, there is “Backup and reset”.

In another case, with Xiaomi, Meizu and Huawei smartphones, the algorithm is no different, but the name of the buttons has undergone changes. Go to “Settings” - “Advanced” - “Reset settings”

After the reset is successfully completed, the performance of the gadget will be at its best, and you will forever forget about glitches and processor slowdowns.

The second way to reset settings is to use secret codes, which are mainly used by smartphone repair technicians. But even the simplest user can use any of them without any problems. To do this, we need to press the “Exit” button and when the numbers appear on the screen, we should dial “Secret Code”.

*2767*3855# - this code completely reinstalls the firmware, making your phone new. After the manipulation (1-3%) users may say that the Android smartphone does not turn on. Yes, there is a risk of such an inevitable event, but you should not give up. In this case, you should update the device firmware.

*#*#7780#*#* - with this code the settings will be reset. The applications will be deleted, but the rest of the data will remain.

Hard Reset or hard reset of Android settings.

The third method is the most interesting. It is created for users whose main hobby is updating firmware on an Android device. This is a factory reset via Recovery. The so-called “Hard method” or “Factory reset”. There are nuances and subtleties, which we will tell you in more detail and will try to answer all questions in the comments to the article.

This “Reset” method usually occurs when the device screen is turned off, using a certain key combination.

For reference! Be sure to charge your device to at least 80%.

Let's get started. Turn off the device.

Each Android smartphone manufacturer has a different key combination for entering the device into “Recovery” mode. We advise you to familiarize yourself with the possible options in advance, which we will now tell you about. Typically, there is a basic combination: Volume down (-) button and device ON/OFF button. Press them until recovery appears (like the image in the photo below).

If you have a Samsung smartphone without a HOME button (Home button), then press the volume key (+) and turn the device ON/OFF.

Otherwise, if “Home” is present, the key combination will be as follows: press and hold “+”, “Home” and “On/Off” at the same time. As soon as Samsung appears, release the pressed buttons.

For some LG models, you should press (-) and the "ON/OFF" button, but after the logo appears, the power button should be released and pressed again.

On certain types of SONY phones, press (-), (+) and the “ON/OFF” button simultaneously.

After our actions, the “Recovery” menu will look something like the one shown in the photo below.

Next, you should navigate through the Recovery menu using the volume buttons and select “wipe data/factory reset” or “Clear eMMC”, “Clear Flash”. The selection is made using ON/OFF. Select the desired item and press “yes” or “ yes - delete all user data." After the phone has completed a hard reset, select the "Reboot System Now" option. At this point, the "Hard Reset" process can be considered complete.

We have highlighted as a separate point the situation that owners of Samsung devices may find themselves in. It happens that the gadget does not enter “Recovery” mode. In this case, the Ging adapter will help you. It is inserted into the charging socket and within 3 seconds enters the smartphone into Recovery mode.

A program has also been developed to reset settings on Android using a computer - Android Debug Bridge (ADB). It should be installed on your computer, and ADB mode should be activated on the phone. Connect the phone to the computer (preferably via the original cable).

To reset Anrdoida settings from your PC, click “Start” - “Run” and enter “cmd”. After running the command prompt, open the program by typing adb reboot recovery in the command line. After entering the smartphone into Recovery mode, follow the instructions described above.

conclusions

In this guide, we looked at the most popular ways to reset settings on Android smartphones. Before deleting information or doing a hard reset, try to prepare a backup of your data or synchronize your device with your Google account.

If you have any questions, ask them in the comments to this article.

Details Benks Created: October 28, 2017 Updated: November 11, 2017

Often in our instructions and tips, we advise you to reset Android to factory settings, in other words, do Hard Reset as a solution to various problems. But you should understand that this process will delete the following data from your device: all installed programs and games, contacts from your address book, as well as all information about the device user (accounts). The data on the memory card will not be affected.

After you do a factory reset, your Android device will be the same as it was when you purchased it from the store. Just in case, you can back up your data in case you might want to restore it later.

There is nothing complicated about this, you just need to follow the instructions. There are three main ways to do it Hard Reset.

How to reset Android to factory settings: method No. 1.

So, this method will be relevant for those users whose device does not turn on at all or freezes on the company logo when turned on, as well as if you have forgotten the pattern key and lock password. In other words, if you don’t feel comfortable working with a smartphone or tablet, then these instructions will be of interest to you.

Turn off your device completely (all buttons and the screen should go out). This is necessary in order to enter Recovery mode. To do this, you need to simultaneously press and hold a certain combination of keys. Different combinations are suitable for different devices:

• volume down button ( Volume DownPower) (most common combination);
• On some LG models - similar to method 1 ( power button+volume down), but as soon as the LG logo appears, release and press the power button again.
• volume up button ( Volume Up), volume down button ( Volume Down) and the device power button ( Power);
• device power button ( Power), home button ( Home) and volume up button ( Volume Up);
• volume up button ( Volume Up) and the device power button ( Power);
• volume up button ( Volume Up) and volume down button ( Volume Down).

These key combinations must be pressed and held until your device enters Recovery mode.

Navigation through the Recovery menu is carried out using the volume buttons (if you have a touch Recovery, control is carried out in the standard way), and confirmation of the choice is carried out using the power button or the context menu.

The next step that needs to be performed is to search for the item “ wipe data/factory reset"(or " Clear eMMC", or Clear Flash), select it, and then click “ yes - delete all user data" After completing the process of deleting all data, select the item “

The names of the items may differ, but not the essence, so the process of resetting Android to factory settings is almost the same on all devices.

How to reset Android to factory settings: method No. 2.

So, the following two methods of resetting to factory settings are suitable for those users who can log into the system, go to “ Settings" or get to " Dialera"(dialing numbers).

For devices running Android 4.0 and higher, we need to go to Menu -> Settings-> and select the item Recovery and reset. Next you need to go down to the very bottom and click on “ Reset».

After this, the system will inform us that all data stored in the device’s memory will be deleted. At the very bottom there will be an item “ Reset your phone", click on it.

After this, the system will once again “ask” you whether we want to delete all personal information and downloaded applications without the possibility of recovery, click “ Erase everything" Next, the data deletion process will occur and the device will reboot.

On some devices, the names of the items differ, but the process of resetting to factory settings is completely similar.

How to reset Android to factory settings: method No. 3.

Well, the last method, which is the simplest and does not require searching for reset points. Go to the dialer (number dialing application) and dial one of the codes: *2767*3855# , *#*#7780#*#* or *#*#7378423#*#* . After which the data reset process will begin, all information will be deleted.

This completes the process of resetting to factory settings, there is nothing complicated about it. The main thing to be aware of is that all data from the device will be deleted and it will not be possible to restore it.