The most effective ways to clean your computer's RAM. A quick way to clean the slot and memory card of a PC and laptop

There is an opinion among computer users that you can never have too much RAM... And you can’t argue with this, dear reader, especially when it comes to modern machines whose hardware configuration corresponds to solid characteristics, and the Windows system installed on board the PC is 64 -bit version. However, the “painful” problem of many - “the computer’s physical memory is loaded, what should I do” - still continues its inglorious existence, perplexing the average user and sometimes forcing an experienced computer guru to rack his brains over solving the “lack of RAM” problem. However, we will not delve into the extreme complexity of “operational misunderstandings” and will resort to simple, but nevertheless effective methods for diagnosing and optimizing the computer swap system. Well, the article promises to be memorable. RAM secrets are waiting to be revealed!

Guard, the computer's physical memory is loaded!

What to do and how to deal with it? Probably, these are the questions that come to the user’s mind when he becomes an involuntary witness to the monstrous slowness of the Windows operating system.

With each subsequent turn on of the PC, the startup of the OS becomes slower and slower.
The clickability of the operating system at startup and during use becomes unbearable due to the “long-lasting waiting process.”
The once “flying” applications, to put it mildly, take a long time to start.
Incomprehensible service messages attack the monitor with their “unobtrusive” presence.

In general, any of the above scenarios (not to mention their complex manifestations) can quickly drive any user crazy. But not everyone who is “expecting” understands that everything described above may be the result of our own omissions. And it’s unlikely that the average user even knows how to make sure that the computer’s physical memory is loaded?

What should you do first if your PC loses performance?

Of course, first of all, you need to diagnose the system. Moreover, everything necessary for this is provided in advance by Microsoft developers. Well, it's time to move on to the practical part of our story.

Right-click on the taskbar (the lowest area of the screen).
From the drop-down list, select “Manager...”.
Once in the work area of the service window of the same name, use the “Performance” tab.

A visually presented graph will allow you to estimate the RAM utilization rate. If Vista or a later version of Windows OS is installed on your PC, then the value of memory used should not exceed 70-75% of the total nominal value of the physical swap. Otherwise, you need to unload the RAM area.

Memory problems start from the start of the OS

When you observe that your computer's physical memory is loaded at 80% or above this value, pay attention to startup. Most likely, when Windows starts, the mentioned service activates many background applications and various software. Often, it is for this reason that the RAM becomes overloaded, literally “torn” between requests from multiple programs to allocate the amount of memory they need to operate. However, such an unpleasant situation can be corrected quite easily.

In the search bar of the Windows start menu, enter the command “msconfig”.
After pressing the “Enter” button you will be taken to the “System Configuration” service menu.
Activate the “Startup” tab and edit the priority list of startup software.

You will be surprised how quickly your OS will boot after a system restart. Nothing prevents you from making sure in practice that the problematic situation when the computer’s physical memory is loaded on Windows 7 will be exhausted after you remove all unnecessary things from startup.

How to clear RAM: two “fundamental” optimization methods

Let's start with the main thing - you need to disable unused software. As a rule, in order to see which programs are running in the background, you need to look into a special area of the OS - the system tray - and directly from there (by pointing the marker at the object and right-clicking) deactivate the selected software. It may well turn out that immediately after you implement the proposed recommendation, the question “The physical memory of the computer is loaded, how to clear it” will be completely resolved. After all, some applications running in the background are incredibly “gluttonous” in terms of using system RAM resources.

Another way to free up memory

So, in order to see which programs or utilities are “secretly” consuming the kilo- and megabytes of RAM you need so much, do the following:

Press the key combination “Alt+Ctrl+Del”.
After you get to the service window that is already familiar to you, open the “Processes” tab.
Analyze the list presented and use manual correction to turn off the background application that you do not need at the moment.

However, you should not rush to deactivate “aggressive items”, since disabling some critical Windows services can have a detrimental effect on the overall stability of your OS.

“Miracle” RAM optimizers

When the physical memory of the computer is 90 percent loaded (from the earlier section of the article you learned that this value is a deviation from the norm), some users rush to clear the RAM area using various utilities. However, not many of them realize that this type of RAM optimization is a waste of time, since they do not contribute anything concrete to solving the problem. The “promising functionality” of such optimizers only creates the illusion that memory is freed up, while introducing some difficulties into the operation of the OS... Rest assured: the manual method is much more effective and more expedient to implement than imaginary “help” from third-party developers. By the way, we advise you to simply forget about this (second) method of RAM optimization...

Malicious code and methods for detecting it

Often the user asks the question: “The physical memory of the computer is loaded: is it a virus or not?” This problem is especially acute when all the above actions have been implemented in practice. What's the matter and why does RAM continue to lose its working potential? Let's figure it out.

Download one of the anti-virus utilities from the Internet: Dr.Web CureIt!, Malwarebytes Anti-Malware or HitmanPro.
After the running application finishes scanning the system, infected objects will be cleaned, and malicious viruses will undergo the removal process.

It is worth noting that the traditional antivirus installed on your PC is not always able to fully protect your system from penetration and the subsequent negative impact of one or another “digital infection.” Therefore, it makes sense to check your OS using the above utilities.

When the amount of RAM corresponds to the concept “NOT TOO”

If you are working in Word and at the same time listening to music using an Internet browser, and you see that the physical memory of the computer is 77% loaded, there is no reason to worry. But if things are different, it makes sense to look at the problem from a technical point of view and ask some questions: how many RAM modules are installed on your PC and what are their nominal “capabilities”? It is worth noting an important fact: depending on the version of the Windows system used, the requirements for the amount of RAM can vary from 256 MB to 2 GB (only for the “needs” of the operating system itself). Well, if you still decide to use a resource-intensive program on a computer with limited RAM, then it’s time to think about expanding the paging file.

Summing up

So, with some confidence we can say that the once difficult situation for you “the physical memory of the computer is loaded, what to do” has now been resolved. Nevertheless, one important “operative” point is still worth mentioning.

If you are using Windows Vista, OS 7, or later versions of a Microsoft product, then if you do not have enough RAM, you can try disabling the Superfetch service.

And one last thing: don’t miss the opportunity to upgrade your PC - adding an additional RAM module will significantly expand the functionality and “combat capability” of your computer equipment. Don't let your computer fall into unconsciousness!

fb.ru

Ways to clear memory in Windows 7

Have you noticed that Windows has become slower and are wondering what could be affecting the system's RAM? The answer is simple - over time, the performance of every computer, even the newest one, decreases. This is due to numerous programs that leave behind unnecessary data, as well as files from the Internet that clog up RAM. There are many ways to optimize your PC and clear Windows 7 memory. Let's look at the main ones.

Troubleshoot performance issues

You can start cleaning and correcting errors that have accumulated on your computer using the built-in Windows scanning service. It checks all the factors that affect the performance of your PC and suggests solutions to problems that arise. You can start this service as follows:

The CCleaner program will help you clear your RAM of accumulated junk. This is a free and very useful utility that will help you deal with this process in a matter of seconds. To do this you need:

CCleaner will automatically optimize and rid your PC of files clogging it.

Note! When ridding your computer of elements that are slowing it down, CCleaner can remove cookies stored for each browser. If you do not want this to happen, simply uncheck the corresponding option under the search engine.

Removing unused programs

Often the RAM is loaded due to the large number of installed programs and the files they produce during their operation. Let's start by simply removing all unused software:

go to “Start”, “Control Panel” and then “Uninstall programs”;
scroll through the list and select those that are not used or not needed at all;
we delete them manually, which will help free up some memory.

Autostart cleaning

Many programs are added to Windows autorun during installation and start working in the background when the computer starts. They are often the reason for a sharp drop in computer performance, loading RAM with unnecessary processes. To start optimization and determine which of them are in startup, do the following:

go to the “Start” menu, then “All Programs”;
find the “Startup” folder and view its contents;
We leave only the essentials in it; the rest can be removed, freeing the RAM from unnecessary load.

There is another way to get to the cleaning menu:

The previously described CCleaner will also help you check and configure startup:

Particular attention should be paid to all kinds of updaters designed to download updates from the Internet.

Such software, running in the background, takes up some of the RAM resources and may remain invisible to the user.

This completes the cleaning. It should be remembered that files clogging the RAM appear on the PC literally every minute of its operation. For this reason, it is highly recommended to carry out preventive RAM cleanings without waiting for a drop in system performance.

windowsTune.ru

How to clean the RAM of a Windows 7 computer

Every user working on a computer that has a small amount of RAM occasionally encounters the problem of slow operation of the operating system, periodic crashes of running programs, or errors due to insufficient RAM. In order to get rid of all this, you just need to know how to clean the RAM of a Windows 7 computer. It should be understood that during operation, all RAM is not available to the user. Part of it is taken by the OS for its needs, as well as all its services. And the rest of the free memory is available for running programs or for running a video card that uses RAM. If, after starting the operating system, you do not have enough free RAM, then you should begin the process of cleaning up the RAM by disabling unnecessary services, startup programs, or disabling resource-intensive processes.

Two main ways to clean your computer's RAM

1. Disable unused windows services

The easiest way to clear RAM is to close all unused programs and leave only one, which you will continue to work with. This is not always convenient, but it gives the most tangible results. For example, let's look at memory usage statistics in the task manager.

In the “Performance” tab you can see how much physical memory is available and how much is free at the moment. You can also see how much memory the system is currently using. As you can see, there is not much memory available. The “Applications” tab shows all currently running programs, and in order to free up the computer’s RAM, you need to close them all. Let's try to leave only WORD and look at the result.

After closing programs, the situation changes dramatically and the available memory becomes much larger.

To free up more memory, you can additionally view all running processes in the system and close unnecessary ones, but the effect of this will be small.

Unnecessary processes include running agents of some programs, the purpose of which is only to monitor the appearance of a new version of the application on the site, or simply programs that are automatically launched when the system starts. It is better to immediately disable them in the system autostart so that they do not even load. This can be done by running the msconfig utility or using the capabilities of the CCleaner system cleaning program.

2. Clearing the list of programs at startup You can clear the list of programs that automatically load with the OS using various programs. The CCleaner program has proven itself to be excellent for these purposes. Using her example, we will look at how to do this. Immediately after starting the program, go to the “Service” tab located on the left panel (1). After that, select the “Startup” section (2). The screen will display a list of programs that start when Windows starts. From it you should select only those that you do not need immediately after switching on. As a rule, these are automatic updates, or unimportant programs that take away valuable megabytes from RAM. So, select the line we are interested in (3) and press the “Turn off” button (4).

In addition, this program will be useful for cleaning temporary files from browsers, system folders, and all kinds of applications.

click-net.ru

How to clear RAM and increase computer speed

This page contains information on how to clear RAM and speed up your computer. If you work with a lot of programs on your computer or laptop, you will notice that your computer becomes quite slow. At first, when you start your computer, it starts up quite quickly, but when you start running many programs for a long time, it starts up slower.

The main reason for this is that your computer's random access memory (RAM) contains fragments of parts of the programs you were working with. Sometimes you need to clear your computer's RAM because a program freezes and stops responding. RAM (Random Access Memory) contains data from running programs and the operating system. RAM is much faster than a hard drive, but unlike a hard drive, data in RAM is only lost when the computer's power is turned off. To partially clear your computer's RAM, you can close some programs that are currently open. In Windows, right-click on any program in the taskbar and select the Quit option. This will free up memory that was used by this program.

HOW YOU CAN INCREASE THE SPEED OF YOUR COMPUTER

Clear RAM

Create your own RAM Cleaner using Notepad. To partially clear the RAM and increase the speed of your computer, follow these steps.

Step 1: Open Notepad Step 2: Write these lines of code

MsgBox "Do you want to clear your RAM?",0,"Exclusive RAM clear" FreeMem=Space(307200000) Msgbox"RAM clear completed successfully..",0,"Exclusive RAM clear" Step 3: Now save it by pressing CTRL + S Step 4: When asked for a file name, save it as “ram_cleaner.vbs” (without quotes) and select ❝All Files❞ in the File Type field. Step 5: Run it and your memory will be cleared..What this piece of code above says.

MsgBox - “Do you want to clean your Ram?” ,0, “Exclusive RAM Cleaner” This line of code displays a message box asking: Do you want to wipe your Ram?

“0” means the type of options available. If “0”, you will only receive an OK button in the message box. To make a window with OK and Cancel buttons appear, change the number 0 to 1..

“Exclusive RAM Cleanup” is just a title in the message box.

FreeMem=Space(307200000) This piece of code does the real job of clearing 3GB RAM.. If your memory is 2GB then change it to 2048 with 5 zeros after it.

Msgbox - “RAM cleaning completed successfully..”, 0, “Exclusive RAM cleaning” This piece of code displays the message - “RAM cleaning completed successfully..” (without quotes).

That's all!! Now, whenever you want to free up your RAM by deleting temporary data in it, simply launch ram_cleaner.vbs by double-clicking the ram_cleaner.vbs icon on your desktop.

There is a small program for defragmenting and maintaining stable operation of RAM, which you can read about in the article “Cleaning RAM with RAM Def 2.6 Xtreme”.

You can clean and defragment RAM using the tools in this list to improve your computer's speed.

1) nCleaner. Checks the registry, hard drives, allows you to control startup, areas of free space on your hard drive, monitors free space on hard drives, free RAM and much more. You can pre-scan settings to determine which files you want to delete and which you don’t want to delete. (http://ncleaner.software.informer.com/)

2) CleanMem is a software tool that helps the user overcome the weakening of unused memory by applications, effectively freeing memory from applications. This program does not require startup input and memory clearing. (http://cleanmem.software.informer.com/)

3) VC RamCleaner. This is a free tool that scans your system looking for areas of memory that are no longer functional. Within a few seconds, VC RamCleaner will free up RAM, increasing system performance. You can choose to perform automatic or manual memory clearing. (http://vc-ramcleaner.software.informer.com/

4) MemoryCleaner. It is a convenient tool that will speed up your computer. Running in the background, whenever you encounter low memory, MemoryCleaner performs a quick memory expansion, removing empty memory blocks, and hence providing more free RAM. (http://memorycleaner.software.informer.com/)

5) RAM Memory Cleaner and Optimizer. A smart memory management program that helps your computer (PC) run better, faster, and last longer. Allows you to instantly free up memory if your system is slowing down. (http://ram-memory-cleaner-and-optimizer.software.informer.com/)

I could continue listing programs with which you can try to clear RAM and speed up your computer, but I decided to leave that for the next article.

I really liked the JetBoost program, which works by stopping processes and programs and speeding up the computer. You can find out more by reading the article “How to speed up your computer with JetBoost.”

maks-1.com

windows 7: How to clear virtual memory

Virtual memory in any operating system works in this way: individual, usually inactive, fragments of memory are moved from random access memory (RAM) - a technical device that implements the functions of RAM - and free it (RAM) for loading other memory fragments. Pages paged out of memory are temporarily stored in the paging file. From it you can extract information that is used during system operation. For example, in some organizations where they are constantly working with some important secret data, specialists periodically clean the virtual memory. Let’s look at how to clear the virtual memory below using the example of Windows 7 OS and do it in three ways: through the control panel, through the search bar and through editing the registry

Method No. 1. Activating virtual memory cleaning through the control panel

Open the Control Panel - click the Start menu and select the Control Panel command.

Rus. windows 7

English windows 7

A window will open and at the top (in the Explorer line, if you click on the small triangle, a drop-down list will open) open the additional menu “All Control Panel Items”.

Rus. windows 7

English windows 7

From the list that appears, select the “Administrative Tools” section,

Rus. windows 7

English windows 7

and then in another window that appears - “Local Security Policy”.

Rus. windows 7

English windows 7

Next, in the “Local Policies” section, go here – “Local Policies” - “Security Options” and find the line “Shutdown: Clear virtual memory pagefile”.

By default, this security option will be disabled in the line. Double-click with the mouse and a new window will appear: this is where you need to activate the “Enabled” status, then confirm your choice by clicking “OK”.

Rus. windows 7

English windows 7

Method No. 2. Activating virtual memory cleaning via the search bar

To clear the system’s virtual memory, use the search bar. Call up the Start menu, where there is a convenient search bar at the bottom - that’s where we enter the name of the file gpedit.msc. Next is the Enter key.

Then we will see a new window that opens - “Local Group Policy Editor” - and in it we make a choice according to the following scheme: “Computer Configuration”, then “Windows Settings”, then “Settings” Security Settings.

Rus. windows 7

English windows 7

The last window will provide us with a separate list in which we need to select the “Local Policies” folder,

Rus. windows 7

English windows 7

and then the final item - the line “Security Options”.

Rus. windows 7

English windows 7

By clicking on this line, as in the first method, we find another line “Shutdown: Clear virtual memory pagefile”. We activate the “Enabled” status in the same way as in the first method, and then click “OK”. That's it, the process is completed successfully.

Method number 3. Activating virtual memory cleaning by editing the registry

The third way to activate virtual memory cleaning is by editing the registry. As before, click the “Start” menu and enter “regedit” in the search bar at the bottom and press the Enter key.

The “Registry Editor” window will appear on the screen - here we will open the folders in the given sequence: “HKEY_LOCAL_MACHINE”, then “SYSTEM”, then “CurrentControlSet”, then “Control”, then “Session Manager” and the last item – “Memory Management” folder.

In the last folder we find the parameter “ClearPageFileAtShutdown”,

open the window by double-clicking the mouse and edit it - enter the number “1” instead of “0” in the value column.

That's it, the process is completed successfully.

free-progs.org.ua

How fast and productive a computer will be depends on three main components - the processing power of the processor, the amount of RAM and the type of hard drive. But if the type of physical media is largely secondary, then RAM is no less important than the processor. If you have a cool CPU, but little RAM, the computer will not cope with many tasks; if there is plenty of RAM, but a weak processor, the essence will not change and the computer will also work slowly.

To ensure high performance, you need to have a sufficient amount of RAM module installed on your PC, however, there are tools that allow you to optimize memory use. The RAM can be cleaned by unloading non-essential processes from it and thereby freeing up resources for your needs.

Optimizing RAM using system tools

So, how to free up RAM on a computer with Windows 7/10, and do you need any special tools for this? If you are an advanced user, you can perform this cleanup manually by ending non-critical processes in the Task Manager and disabling unnecessary services and components. It is important, however, to understand what task a particular service performs, because otherwise there is a risk of reducing the functionality of the operating system or causing errors in its operation.

Checking startup

The best place to start optimizing RAM is by analyzing startup. There are quite a lot of programs that, when installed, are automatically registered in and run in the background every time the system starts. By deleting them from there, you will thereby free up the space they occupy in memory. Open Task Manager, switch to the Startup tab and disable autostart of all those programs that you do not consider important to you.

Fast RAM offload

This method of clearing RAM in Windows 7/10 is to forcefully end processes in the Task Manager. Having opened the Manager, switch to the “Details” tab, sort the processes by clicking on the “CPU” column header and terminate those that consume the most resources through the context menu.

Close only those processes whose purpose you know; however, even if you make a mistake, nothing bad will happen; Windows will either not allow you to do this or will display a message about a possible system shutdown. In Windows 7, a BSOD cannot be ruled out, but this is only if a critical process is terminated using third-party utilities that have the appropriate privileges.

Disabling services and features

You can clear RAM on a Windows 7/10 computer by disabling non-essential services. To do this, the team msconfig in the “Run” window, launch the “System Configuration” utility, switch to the “Services” tab and carefully examine the contents of the list, hiding Microsoft services to begin with. As with processes, you must understand what you are doing, that is, you need to know what this or that service is responsible for. If you turn off the Windows Audio service, for example, the sound on your computer will stop working.

The same goes for components. We open the equipment with the command optionalfeatures and see what can be turned off. If you don't use, say, printing, why not disable the services that control it. Windows Activation Service, XPS, Print and Document Viewer Services and Viewers, Work Folder Clients, Telnet and TFTP, SMB and SNMP, Windows Location Provider, NTVDM, Hyper-V, IIS Web Embedded Engine, Telnet Server and Microsoft Message Queuing Server, TIFF IFilter, RAS Connection Manager, RIP Listener, simple TCPIP services - all of these components are rarely used, so they can be safely disabled so as not to take up memory space.

The best programs to clean RAM

Users who doubt their abilities can resort to using third-party utilities to clean up their RAM. Using them is a fast and safe way to optimize RAM, at least you can be sure that they will not disable anything really important and necessary for the system to function.

Mem Reduct

A small utility for monitoring RAM consumption and quickly cleaning it. Mem Reduct is extremely simple to use - right-click to call up its menu from the system tray and select the “Clear memory” option. The utility will immediately unload non-critical processes from memory.

Additionally, the program supports automatic cleaning of RAM when a certain level of its load is reached or according to a timer, cleaning of a specific area, and settings for appearance and behavior are available. After unloading the memory, the utility shows the result in megabytes. Free, effective and in Russian.

A utility similar to Mem Reduct, but even simpler. You can clean the RAM in it with one click - by clicking the “Optimization” button from the system tray or main window. There are few settings and additional functions, there is only adding to Windows startup, clearing the buffer, minimizing to tray, launching when idle.

Automatic memory clearing is supported when a user-specified value is reached. Wise Memory Optimizer is free, lightweight and has a multilingual interface. Russian language is selected by default.

Mz RAM Booster

A popular “accelerator” and memory optimizer in certain circles. It differs from previous tools in the flexibility of setting optimization parameters, which beginners generally don’t need to delve into, the main thing is to know the purpose of the three main modules - Start Optimize, Recover RAM and CPU Boost. The first starts a procedure for clearing memory used by exe files, the second unloads memory occupied by DLLs and various services, the third, in theory, should speed up the processor, but for some reason this function does not always work correctly, leading to Mz RAM Booster freezing.

Additionally, you can check the boxes on the “System SpeedUp” tab as shown in the screenshot - activating these functions will increase RAM by disabling non-critical services and the function of recording service logs. The program is free, the minus is that there is no support for the Russian language.

The most advanced of all RAM monitoring and optimization tools offered here. The program includes a resource consumption monitor, a fast optimizer, a benchmark, a specialized process manager and an information panel that displays system data. The main methods for optimizing RAM in RAM Saver Pro are defragmenting it, dumping it into the page file, and preventing leaks in applications.

How to clean the RAM of a computer with Windows 7/10 using it, without going into all the details? Simple enough. You need to go to the “Optimizer” tab and click “Optimize”, and the program will do the rest itself. You can also work with individual processes by switching to the tab of the same name. The optimizer is distributed on a paid basis, the interface language is English.

A rational approach to cleaning RAM

So, we figured out how to clear RAM on Windows 7/10, but is it worth resorting to such techniques and, if so, in what cases. Clearing RAM can indeed improve your computer's performance, but it should be done correctly, avoiding, if possible, using third-party "click and go" programs. The fact is that almost all accelerator programs use the EmptyWorkingSet function in their work, forcibly unloading unused data from RAM into the swap file.

According to the Task Manager indicators, memory increases, which, however, has a very minor impact on performance. The reason is more than trivial - data that should be stored in RAM and that the system or software can request at any time is stored in a swap on the hard drive, the read/write speed of which is much lower than RAM. Accelerator programs also use other methods that are equally dubious, for example, they allegedly require a significant amount of resources from Windows for their operation, deceiving the system and forcing it to free the cache.

The method is ineffective, since Windows very quickly detects the trick and directs the freed memory to its needs and the needs of running programs. If you really want your computer to work faster, deal with installed programs, especially those hanging in startup, as well as unused services and components of the system itself.

Owners of every PC who have insufficient RAM are often indignant at the sluggishness of Windows 7, and they are also often worried about freezing applications in which they work. To eliminate the occurrence of such problems, all you need is knowledge of what to do to clean the RAM of a laptop or desktop computer on Windows 7.

It should be noted that there is no access to the full amount of RAM. A certain portion of physical memory is allocated for the normal functioning of Windows, and the rest is spent on running applications and video devices that use RAM resources. If, after loading Windows, the user does not have enough RAM for comfortable operation of the computer, it is necessary to analyze how the physical memory is loaded and take the necessary measures to unload it. Stopping processes that require significant RAM resources greatly helps free up RAM.

Disabling unnecessary operating system services

The main method of clearing physical memory is to disable utilities that you are not currently using. This method allows you to get the most noticeable and fastest effect in increasing the speed of Windows. How much RAM is loaded at a given time can always be determined using the task manager.

In the task manager, you need to go to the “Performance” tab. Here it is possible to analyze exactly how the RAM is loaded and the amount of free physical memory available for work at the current time.

This window also shows the amount allocated for Windows operation. The “Programs” tab contains the entire list of currently running applications. To clear RAM, it is recommended to disable them all. For example, leave only one program that is necessary for the current work and again look in the task manager at how much RAM has become loaded. Immediately after stopping unnecessary utilities, there is a significant increase in free RAM.

If you need to clear some more physical memory, then you need to analyze all processes and disable unused ones, but the increase will not be so significant.

Processes that can be closed include application services that only monitor for updates. It is necessary to disable them in order to prevent them from starting when the computer is turned on. It is possible to do this using the program “msconfig”, as well as using a special utility “CCleaner”.

Startup optimization

It is possible to optimize the startup process by reducing the number of applications that launch simultaneously with the operating system loading using several popular programs that are designed specifically for this purpose.

One of the best such utilities today is CCleaner, so the algorithm of necessary actions is given below for it.

You need to go to the tab in the “CCleaner” window that opens.

Here you will see a list of all applications that are loaded along with the operating system. In this list, you need to mark only the programs that the user needs immediately after loading Windows. All unnecessary, unimportant utilities take up a certain amount of RAM, which is not enough for the user to work comfortably. You need to mark the required line and click on the “Turn off” button.

Quite often, when working at a computer, a user may notice that the system begins to slow down. The RAM is to blame, or rather the fact that it is heavily loaded with open programs and browser tabs. When memory becomes very low, the computer simply freezes, and when you open a window of some program, it may say “Not responding.”

Removing utilities from startup

Removing unnecessary programs from startup will also help increase space in RAM. All of them are launched together with the start of the operating system without your participation and immediately take away part of the OP. Often this list includes antivirus software, cloud storage, browsers, and email services. Moreover, leaving only what you need there will increase the loading speed of Windows. And programs that you use once a week, or even less often, can always be launched manually, by simply clicking on the shortcut.

So, to open the desired list, right-click on Start and select from the list - this is for Windows 10. Seven owners can find this item simply by clicking on Start. If it is not there, use the combination Win+R.

In the Manager, go to the section. The entire list of programs that are included in it will be displayed there. Select those that you rarely use and click “Disable” at the bottom. If everything is done correctly, the following message will appear in the “Status” column: “Disabled”.

After this, close all running applications and restart your computer. All - utilities removed from autorun will not load and will not consume RAM.

For those with Windows 7, in the window "System configuration" after opening the desired tab, a list of elements that are included in startup will immediately appear. If you do not need the program to start every time with the system, uncheck the box next to it. When you leave the birds only in the required fields, click “Apply” - “OK”. All that remains is to restart the computer.

Restart Explorer

Restarting Explorer will also help free up Windows RAM a little. To do this, open again "Task Manager" by clicking on the panel below and selecting the desired item from the list.

Next, on the “Processes” tab, find “Explorer”, highlight this field and click "Restart". The screenshot shows that it takes up 13.7 MB of memory. Then the screen will turn black for a second and all icons from the Taskbar will disappear, but after a while everything will appear again in the form you are familiar with.

Well, now our Explorer takes up a little less memory - only 9.6 MB.

For owners of the seven, the algorithm of actions will be slightly different. Open the Manager window and go to the “Processes” tab. Here you need to find explorer.exe in the list. Select this line and click "End process" bottom right.

The next step is to restart. In the open window, click the tab “File” - “New task”.

This method helps to free up memory for a short time, since with each new Explorer window that is opened, it will decrease again.

Using programs

There are also special programs for cleaning RAM. Many of them have a very simple interface in Russian, and will be understandable even to an inexperienced user.

The main window of the utility looks like this. It displays data from physical, virtual memory and system cache. The “Clear” button will help you perform the action we need.

The program is also quite popular. With its help, you can not only “Clear RAM”, but also perform “Optimization”, which will free up more space.

Another utility. It displays memory data in digital and graphical form, and the “Optimize” button will free up RAM.

Creating a cleanup file

If you want to feel like a cool computer geek and don’t want to install third-party utilities, you can create your own script, using which you can clear your RAM.

To get started, open Notepad. Click "Start" - "All Programs" - "Accessories" - "Notepad".

Then paste the following text into it:

MsgBox “Are you really going to clean the RAM?”,0,”Cleaning RAM”
FreeMem=Space(204800000)
Msgbox "The RAM cleaning process completed successfully!",0,"Cleaning RAM"

In the FreeMem line you need to indicate the amount of RAM that is installed on your computer. The value is calculated as follows:

Memory capacity in gigabytes*1024*100000

For example, for 2 GB we write 204800000, 3 GB – 307200000, 4 GB – 409600000.

If you don’t know how much RAM is installed on your computer, then you can look at this value. In the top ten, right-click on Start and select “System”.

In Windows 7, click the Start button, and then .

The window that opens will display all the system data. Look what is written in the box "Installed memory"– this is the value we need. Write the value into the text in Notepad.

Click on the "File" tab and select "Save As".

Select a location on your computer, in the example this is your desktop. You can write anything in the “File name” field, most importantly add the extension .vbs at the end. In the "File type" field, select "All files" from the drop-down list. Then click the “Save” button.

To clear memory, simply double-click on the created file. Then in the window that opens, click “OK”.

The RAM space will be successfully freed.

Removing viruses

Pest programs, or simply viruses, also take up space in RAM. Most often they are added to the startup list. Therefore, it makes sense to scan your computer for viruses with an installed antivirus program and delete all malicious files found.

For more information on how to remove viruses from your computer, read the article by following the link.

Freeing up space on your hard drive

Lack of free space on the hard drive also affects RAM. The fact is that all unused applications from RAM are loaded into the page file. And if there is not enough free space on the disk partition where the paging file is stored, then this method will not work effectively. So it is very important to free up space on the disk partitions that you have on your computer by deleting all unnecessary files, programs, photos, music.

Since the paging file is stored on the system drive by default, and it is most often called C:, you can read the article: how to free up space on drive C:

About the author: Oleg Kaminsky

Webmaster. Higher education with a degree in Information Security. Author of most articles and computer literacy lessons

RAM is a computer device that is used by programs to perform operations while running. Absolutely every application uses RAM to a lesser or greater extent. - this is a logical question that allows you to speed up your PC, improve its quality indicators and achieve maximum productivity.

How to free Windows RAM from programs?

An excessive number of applications invariably loads the computer's memory, causing it to take a long time to process all commands. Often, inexperienced users perceive lags in the system as a failure of the system, and without doing simple cleaning, they call the experts or interrupt the system themselves.

Insufficient RAM manifests itself in the following symptoms:

The computer takes a long time to process requests;
Applications often freeze and the “Program is not responding” window appears;
Spontaneous closing of tabs or utilities with the message “Not enough memory”;

In rare cases, Explorer fails and the desktop and taskbar disappear;
Games, even if they meet the minimum parameters, do not launch;
Applications, especially games, run with significant lags.

Indeed, the question of how to free up RAM in Windows 10 in other versions is a rather large section, since everything, wherever you look, wastes computer resources, also applies to the smartphone. First of all, you need to get rid of the programs that are the main source of the problem.

First of all, pay attention to the taskbar; if you have a lot of minor, absolutely unnecessary programs running, then freeing up memory is quite simple. Close all third party applications. If there are really a lot of programs, but they are all needed, then you will just have to increase the RAM.

Press Ctrl + Alt + Del to open Task Manager. Check the "Applications" tab, there should be no third-party programs present. Then go to the “Processes” tab, you can sort the list by the “Memory” parameter. It takes a little experience to identify unnecessary processes that are loading the system. It is important to identify unnecessary and important elements, and in some cases the virus takes up the most memory. The user must always have the account nickname in the tab; do not touch the other items, they are reserved by the system. For more information on the process, view the “Description” or use Google.

Closing programs completely implies removing them not only from their appearance, but also freeing up resources. Applications such as Torrent, Skype, even after shutting down, still remain active, simply minimized in the tray. Check the notification panel by opening the full information by clicking on the up arrow in the lower right corner.

How to free up RAM on a Windows 7 computer? – Eliminate all extraneous background programs. They start along with Windows and immediately begin to consume resources. You can do the following:

Press Win + R and enter msconfig;
Now go to the “Startup” tab;
Next, uncheck the boxes next to all items with unnecessary applications.

In fact, the only important ones are the drivers and those that are necessary to work on the PC every day, every time it starts, and there are quite a few of them.

How to free up RAM on your computer using settings?

How to free up RAM on a Windows computer? – The answer lies on the surface, the more visual effects the system uses, the less performance and freedom the user feels. It is up to each individual to determine the appropriateness of an action.

To put the system into high performance mode, you can:

Click on Start and RMB on Computer, where select “Properties”;
Click on the link “Advanced system settings”;

In the “Performance” chapter, select “Options”;
Check the “Ensure best performance” checkbox or manually leave only the most important effects.

You can also choose a simpler theme. The design, of course, will become less impressive, but the speed, including the amount of memory, will increase. To do this you will have to:

RMB on the desktop and “Personalization”;
Scroll to the end of the list of topics and select one from the “Simplified…” category

Restarting Explorer

Another way to free up RAM in Windows 7 is to restart the explorer process. As it works, it creates additional cache files and cookies, which can lead to problems in the future. Manual deletion and restoration should help free up RAM.

Press Ctrl + Alt + Del;
Go to “Processes”;
Find explorer.exe and terminate it;

Next, click on “File” and “Run”;
Type the process name and Enter.

Alternative methods

The antivirus wastes a decent amount of resources and slows down the startup process of the entire Windows. To do this, it is not necessary to have external software installed; the system also has its own defender built into it. Disabling it significantly frees up RAM and the processor, the system becomes cleaner and faster, but less secure. To disable Windows Defender:

Click on the corresponding item in the “Control Panel”;
Next, select “Programs”, then “Options”;
Go to the “Administrator” section;
Uncheck the “Use this program” option.

To disable external antivirus you will have to go inside the application. They usually have either a deactivation or service suspension feature.

A fairly simple and effective way to free up memory is to use special programs. They analyze all key processes and allow you to reduce their consumption or disable unnecessary ones. They also provide recommendations for manually increasing free space.

An example of an application from this category is Wise Memory Optimizer. The interface is as simple as possible; after launch, the occupied space and the remaining free space are shown. By clicking on the only active button “Optimize Now” all the necessary actions are performed.

Using these options, you can free up a lot of space and the computer will be able to run a previously inaccessible program or will simply work properly. Quite often, these methods free up about 20-60% of memory.

If you still have questions on the topic “How to free up RAM on your computer?”, you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>